Download or read book Boundary Control and Variation written by Jean-Paul Zolesio and published by CRC Press. This book was released on 1994-07-28 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the Working Conference on Boundary Control and Boundary Variation held in Sophia-Antipolis, France, this work provides important examinations of shape optimization and boundary control of hyperbolic systems, including free boundary problems and stabilization. It offers a new approach to large and nonlinear variation of the boundary using g
Download or read book Boundary Control and Boundary Variation written by Jean P. Zolesio and published by Springer. This book was released on 2014-03-12 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises selected papers presented at the IFIP WG 7.2 Working Conference on Boundary Control and Boundary Variation held in Sophia-Antipolis, France in October 1990. From the contents: A. Bensoussan: Exact Controllability for Linear Dynamic Systems with Skew Symmetric Operators; P. Cannarsa and F. Gozzi: On the Smoothness of the Value Function Along Optimal Trajectories; D. Cioranescu and J. Saint Jean-Paulin: Truss Structures: Fourier Conditions and Eigenvalue Problem; G.da Prao and J.P. Zol sio: Boundary Control for Inverse Free Boundary Problems; R. Glowinski: Boundary Controllability Problems for the Wave and Heat Equations; R. Triggiani: Regularity with Interior Point Control.
Download or read book Boundary Control and Boundary Variation written by J. P. Zolésio and published by Springer. This book was released on 1992 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises selected papers presented at the IFIP WG 7.2 Working Conference on Boundary Control and Boundary Variation held in Sophia-Antipolis, France in October 1990. From the contents: A. Bensoussan: Exact Controllability for Linear Dynamic Systems with Skew Symmetric Operators; P. Cannarsa and F. Gozzi: On the Smoothness of the Value Function Along Optimal Trajectories; D. Cioranescu and J. Saint Jean-Paulin: Truss Structures: Fourier Conditions and Eigenvalue Problem; G.da Prao and J.P. Zol sio: Boundary Control for Inverse Free Boundary Problems; R. Glowinski: Boundary Controllability Problems for the Wave and Heat Equations; R. Triggiani: Regularity with Interior Point Control.
Download or read book Boundary Control and Boundary Variations written by J. P. Zolésio and published by Springer. This book was released on 1988 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the proceedings of the Working Conference "Boundary variations and boundary control" held in Nice (France), June 10-13, 1986. The aim of this Conference was to stimulate exchange of ideas between the group working on shape optimization (including free boundary problems) and the group working on boundary control of hyperbolic systems (including stabilization). An important remark is that if one considers a dynamical system governed by linear elasticity the choice of Lagrangian coordinates leads to discuss boundary conditions, or boundary control (for example to stabilize), while the choice of Eulerian coordinates lead to a moving boundary and moving domain . This remark challenges us to consider the domain (or its boundary) as a control.
Download or read book Boundary Control written by Edward L. Gibson and published by Cambridge University Press. This book was released on 2013-01-07 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: The democratization of a national government is only a first step in diffusing democracy throughout a country's territory. Even after a national government is democratized, subnational authoritarian 'enclaves' often continue to deny rights to citizens of local jurisdictions. Gibson offers new theoretical perspectives for the study of democratization in his exploration of this phenomenon. His theory of 'boundary control' captures the conflict pattern between incumbents and oppositions when a national democratic government exists alongside authoritarian provinces (or 'states'). He also reveals how federalism and the territorial organization of countries shape how subnational authoritarian regimes are built and how they unravel. Through a novel comparison of the late nineteenth-century American 'Solid South' with contemporary experiences in Argentina and Mexico, Gibson reveals that the mechanisms of boundary control are reproduced across countries and historical periods. As long as subnational authoritarian governments coexist with national democratic governments, boundary control will be at play.
Download or read book Brown s Boundary Control and Legal Principles written by Walter G. Robillard and published by John Wiley & Sons. This book was released on 2003-05-23 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rev. ed. of : Boundary control and legal principles / Curtis M. Brown, Walter G. Robinllard, Donald A. Wilson. 4th ed. 1995.
Download or read book Boundary Control and Boundary Variations written by J.P. Zolesio and published by Springer. This book was released on 2014-03-12 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the proceedings of the Working Conference "Boundary variations and boundary control" held in Nice (France), June 10-13, 1986. The aim of this Conference was to stimulate exchange of ideas between the group working on shape optimization (including free boundary problems) and the group working on boundary control of hyperbolic systems (including stabilization). An important remark is that if one considers a dynamical system governed by linear elasticity the choice of Lagrangian coordinates leads to discuss boundary conditions, or boundary control (for example to stabilize), while the choice of Eulerian coordinates lead to a moving boundary and moving domain . This remark challenges us to consider the domain (or its boundary) as a control.
Download or read book Shape Optimization and Free Boundaries written by Michel C. Delfour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape optimization deals with problems where the design or control variable is no longer a vector of parameters or functions but the shape of a geometric domain. They include engineering applications to shape and structural optimization, but also original applications to image segmentation, control theory, stabilization of membranes and plates by boundary variations, etc. Free and moving boundary problems arise in an impressingly wide range of new and challenging applications to change of phase. The class of problems which are amenable to this approach can arise from such diverse disciplines as combustion, biological growth, reactive geological flows in porous media, solidification, fluid dynamics, electrochemical machining, etc. The objective and orginality of this NATO-ASI was to bring together theories and examples from shape optimization, free and moving boundary problems, and materials with microstructure which are fundamental to static and dynamic domain and boundary problems.
Download or read book Distributed Parameter Modeling and Boundary Control of Flexible Manipulators written by Jinkun Liu and published by Springer. This book was released on 2018-04-16 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book investigates fundamental issues in flexible manipulator systems, including distributed parameter modeling and boundary controller design. It presents theoretical explorations of several fundamental problems concerning the dynamics and control of these systems. By integrating fresh concepts and results to form a systematic approach to control, it also provides a basic theoretical framework. In turn, the book offers a comprehensive treatment of flexible manipulator systems, addressing topics ranging from related distributed parameter modeling and advanced boundary controller design for these systems with input constraint, to active control with output constraint. In brief, the book addresses dynamical analysis and control design for flexible manipulator systems. Though primarily intended for researchers and engineers in the control system and mechanical engineering community, it can also serve as supplemental reading on the modeling and control of flexible manipulator systems at the postgraduate level.
Download or read book Calculus of Variations Classical and Modern written by Roberto Conti and published by Springer Science & Business Media. This book was released on 2011-06-01 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A. Blaquière: Quelques aspects géométriques des processus optimaux.- C. Castaing: Quelques problèmes de mesurabilité liés à la théorie des commandes.- L. Cesari: Existence theorems for Lagrange and Pontryagin problems of the calculus of variations and optimal control of more-dimensional extensions in Sobolev space.- H. Halkin: Optimal control as programming in infinite dimensional spaces.- C. Olech: The range of integrals of a certain class vector-valued functions.- E. Rothe: Weak topology and calculus of variations.- E.O. Roxin: Problems about the set of attainability.
Download or read book Boundary Control of PDEs written by Miroslav Krstic and published by SIAM. This book was released on 2008-09-25 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear and concise introduction to backstepping, an elegant new approach to boundary control of partial differential equations (PDEs).
Download or read book Profitability with No Boundaries written by Reza M. (Russ) Pirasteh and published by Quality Press. This book was released on 2010-05-05 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authors Pirasteh and Fox know what causes various improvement approaches to fail, and in response provide a new model that combines theory of constraints (TOC), lean, and Six Sigma into a unique program called TLS. This scientifically proven methodology improves results dramatically. The book is divided into two parts. The first is geared to senior decision makers—those who decide “if” their company should adopt a TLS approach. The second deals with the details of “how” and is directed at those responsible for implementing TLS. Readers who would like more depth on any section of Part I can go directly to the matching chapter in Part II. If your intention is to learn how to systematically improve quality, process reliability, and throughput while creating a wasteless enterprise, then this book is for you!
Download or read book Boundary Element Methods for Heat Transfer with Phase Change Problems Theory and Application written by S. G. Ahmed and published by Bentham Science Publishers. This book was released on 2022-06-30 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mathematical modelling of free and moving boundary problems are an important topic in engineering, industry, technology and theoretical sciences. These models allow us to make calculations involved in phase change transitions of materials due to heat transfer. Boundary layer applications are widespread in research and industry. Boundary Element Methods for Heat Transfer with Phase Change Problems: Theory and Application equips the reader with information about heat transfer problems occurring during phase changes. The book covers several boundary element methods, including methods for phase changes, fixed and moving domains and new approaches. The contents are rounded off with chapters on numerical results and industrial applications. Key features: - Simple, didactic presentation of boundary layer problems for heat transfer problems - Covers a wide range of boundary element methods - Includes methods for fixed and moving domains - Explains industrial applications of the methods - Includes solutions to numerical problems The book serves as a textbook for students of advanced mathematics and engineering. It is also a handbook for researchers working on numerical analysis, who require a focused volume on boundary element methods for heat transfer applications.
Download or read book Brown s Boundary Control and Legal Principles written by Donald A. Wilson and published by John Wiley & Sons. This book was released on 2023-11-01 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: BROWN'S BOUNDARY CONTROL AND LEGAL PRINCIPLES The latest edition of the industry-leading reference to boundary law for property surveying In the newly revised eighth edition of Brown’s Boundary Control and Legal Principles, a team of distinguished surveying professionals delivers an updated and expanded treatment of the latest in surveying technology and surveying caselaw. This classic reference to boundary law principles for property surveying continues to evolve, covering all relevant and necessary information related to the complex area of boundary law. The book offers a wealth of case studies on federal and state rectangular and non-sectionalized land surveys demonstrating real-world examples. It provides numerous illustrations highlighting the concepts discussed within, and is an essential reference tool for professionals and students in the area, providing: A thorough introduction to the foundational principles of boundary surveying and property rights Comprehensive explorations of decision-making in professional boundary surveying Practical discussions of the legal principles governing land surveying, land boundaries, and land rights A holistic combination of law and surveying that’s ideal as a reference tool and as a learning tool Perfect for practicing surveyors and those studying for the Fundamentals of Surveying (FS) licensing exam, Brown’s Boundary Control and Legal Principles will also benefit undergraduate and graduate students of surveying programs, as well as lawyers who practice in the areas of real estate, land, and property law.
Download or read book Working on the Boundaries Philosophies and Practices of the Design Process written by R. Ryan and published by . This book was released on 1996 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linguistics across Historical and Geographical Boundaries written by Dieter Kastovsky and published by Walter de Gruyter. This book was released on 2011-06-03 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRENDS IN LINGUISTICS is a series of books that open new perspectives in our understanding of language. The series publishes state-of-the-art work on core areas of linguistics across theoretical frameworks as well as studies that provide new insights by building bridges to neighbouring fields such as neuroscience and cognitive science. TRENDS IN LINGUISTICS considers itself a forum for cutting-edge research based on solid empirical data on language in its various manifestations, including sign languages. It regards linguistic variation in its synchronic and diachronic dimensions as well as in its social contexts as important sources of insight for a better understanding of the design of linguistic systems and the ecology and evolution of language. TRENDS IN LINGUISTICS publishes monographs and outstanding dissertations as well as edited volumes, which provide the opportunity to address controversial topics from different empirical and theoretical viewpoints. High quality standards are ensured through anonymous reviewing.
Download or read book ICoRD 15 Research into Design Across Boundaries Volume 2 written by Amaresh Chakrabarti and published by Springer. This book was released on 2014-12-23 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases over 60 cutting-edge research papers from the 5th International Conference on Research into Design – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design across boundaries. The special features of the book are the variety of insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the largest collection of research from India. For practitioners and educators, it is exposure to an empirically validated suite of theories, models, methods and tools that can be taught and practiced for design-led innovation.
