Download or read book Bonding Between the Concrete and Fiber Reinforced Plastic FRP Rods written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bonding Between the Concrete and Fiber Reinforced Plastic FRP Rods written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The bonding between the Fiber Reinforced Plastic (FRP) rods and concrete is one important factor that determines the performance of FRP reinforced concrete structure. The objective of this study is to measure the interfacial bond strength and to understand the factors that influence this. Two types of interfacial bond strength, Intrinsic Interfacial Bond Strength and Apparent Interfacial Bond Strength have been defined and measured using a single fiber pull-out test. Composite tendons with various surface profiles such as smooth, with lugs, sand coated and machined surface, were tested to study the effect of surface roughness, frictional resistance and bearing resistance on the measured intrinsic and apparent shear strength values. Loading rates were also varied to study their influence on the debond progression and on the measured apparent shear strength. Based on the experimental results following conclusions can be made: (a) Apparent bond strength between the FRP-concrete interface is attributed to bonding mechanisms such as chemical bonding, confinement pressure, frictional resistance and bearing resistance. (b) Contribution from intrinsic bonding mechanisms such as chemical bonding and confinements pressure alone is not sufficient to achieve high FRP-concrete bond strength. (c) Further improvement of the apparent bond strength can be achieved by additional mechanisms such frictional resistance and bearing resistance. (d) Apparent bond strength of sand particle coating (ISOROD(tm)) is influenced by the loading rate due to relatively higher contribution from frictional resistance.
Download or read book Guide for the Design and Construction of Concrete Reinforced with Fiber Reinforced Polymer Bars written by ACI Committee 440 and published by . This book was released on 2003 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bonding Strength Between Concrete and Fiber Reinforced Polymer FRP Bars with Different Embedment Lengths written by and published by . This book was released on 2008 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiber Reinforced Plastic FRP Reinforcement for Concrete Structures written by David A. Hensher and published by Elsevier. This book was released on 2016-01-22 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fiber reinforced plastic (FRP) composites for prestressed and non-prestressed concrete reinforcement has developed into a technology with serious and substantial claims for the advancement of construction materials and methods. Research and development is now occurring worldwide. The 20 papers in this volume make a further contribution in advancing knowledge and acceptance of FRP composites for concrete reinforcement. The articles are divided into three parts. Part I introduces FRP reinforcement for concrete structures and describes general material properties and manufacturing methods. Part II covers a three-continent perspective of current R&D, design and code implementations, and technical organizations' activities. Part III presents an in-depth description of commercially-available products, construction methods, and applications. The work is intended for engineers, researchers, and developers with the objective of presenting them with a world-wide cross-section of initiatives, representative products and significant applications.
Download or read book Experimental Investigation of Bond slip Relationship Between Fiber Reinforced Polymers FRP Bars and Concrete written by and published by . This book was released on 2003 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fibre reinforced Polymer Reinforcement for Concrete Structures written by Kiang-Hwee Tan and published by World Scientific. This book was released on 2003 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced polymer (FRP) reinforcement has been used in construction as either internal or external reinforcement for concrete structures in the past decade. This book provides the latest research findings related to the development, design and application of FRP reinforcement in new construction and rehabilitation works. The topics include FRP properties and bond behaviour, externally bonded reinforcement for flexure, shear and confinement, FRP structural shapes, durability, member behaviour under sustained loads, fatigue loads and blast loads, prestressed FRP tendons, structural strengthening applications, case studies, and codes and standards. Contents: .: Volume 1: Keynote Papers; FRP Materials and Properties; Bond Behaviour; Externally Bonded Reinforcement for Flexure; Externally Bonded Reinforcement for Shear; Externally Bonded Reinforcement for Confinement; FRP Structural Shapes; Volume 2: Durability and Maintenance; Sustained and Fatigue Loads; Prestressed FRP Reinforcement and Tendons; Structural Strengthening; Applications in Masonry and Steel Structures; Field Applications and Case Studies; Codes and Standards. Readership: Upper level graduates, graduate students, academics and researchers in materials science and engineering; practising engineers and project managers
Download or read book Bonded Repair and Retrofit of Concrete Structures Using FRP Composites written by Amir Mirmiran and published by Transportation Research Board. This book was released on 2004 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global response to COVID-19 has demonstrated the importance of vigilance and preparedness for infectious diseases, particularly influenza. There is a need for more effective influenza vaccines and modern manufacturing technologies that are adaptable and scalable to meet demand during a pandemic. The rapid development of COVID-19 vaccines has demonstrated what is possible with extensive data sharing, researchers who have the necessary resources and novel technologies to conduct and apply their research, rolling review by regulators, and public-private partnerships. As demonstrated throughout the response to COVID-19, the process of research and development of novel vaccines can be significantly optimized when stakeholders are provided with the resources and technologies needed to support their response. Vaccine Research and Development to Advance Pandemic and Seasonal Influenza Preparedness and Response focuses on how to leverage the knowledge gained from the COVID-19 pandemic to optimize vaccine research and development (R&D) to support the prevention and control of seasonal and pandemic influenza. The committee's findings address four dimensions of vaccine R&D: (1) basic and translational science, (2) clinical science, (3) manufacturing science, and (4) regulatory science.
Download or read book FRPRCS 5 written by C. J. Burgoyne and published by Thomas Telford. This book was released on 2001 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre reinforced plastics are increasingly being used as replacements for steel reinforcement in concrete structures. The reinforcement can be untensioned, or it can be in the form of prestressing tendons. It is also suitable for gluing onto the outside of a structure to improve flexural or shear performance. This book provides up-to-date research results to give engineers confidence in their design methods.
Download or read book Field Applications of FRP Reinforcement written by S. H. Rizkalla and published by . This book was released on 2003 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: .".. papers presented at the ACI Fall 2003 Convention, in Boston, Massachusetts"--P. iii.
Download or read book Reinforced Concrete Design with FRP Composites written by Hota V.S. GangaRao and published by CRC Press. This book was released on 2006-11-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the use of composites has increased in many industrial, commercial, medical, and defense applications, there is a lack of technical literature that examines composites in conjunction with concrete construction. Fulfilling the need for a comprehensive, explicit guide, Reinforced Concrete Design with FRP Composites presents specific informat
Download or read book Alternative Materials for the Reinforcement and Prestressing of Concrete written by J.L. Clarke and published by CRC Press. This book was released on 2003-09-02 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of steel reinforcement in concrete is a major problem, with serious implications for structural integrity and durability particularly for bridges and marine structures. This new book provides a thorough overview of recent developments and applications in this area. It examines the durability, strength and suitability of alternative materials.
Download or read book Experimental and Analytical Investigation of Bond slip Relationship Between Fiber Reinforced Polymers FRP Bars and Concrete written by Aniket Dilip Borwankar and published by . This book was released on 2004 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Metallic FRP Reinforcement for Concrete Structures written by L. Taerwe and published by CRC Press. This book was released on 2004-06-02 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with a wide range of non-metallic materials, this book opens up possibilities of lighter, more durable structures. With contributions from leading international researchers and design engineers, it provides a complete overview of current knowledge on the subject.
Download or read book Recommended Guide Specification for the Design of Externally Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements written by Abdul-Hamid Zureick and published by Transportation Research Board. This book was released on 2009 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 655: Recommended Guide Specification for the Design of Externally Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements examines a recommended guide specification for the design of externally bonded Fiber-Reinforced Polymer (FRP) systems for the repair and strengthening of concrete bridge elements. The report addresses the design requirements for members subjected to different loading conditions including flexure, shear and torsion, and combined axial force and flexure. The recommended guide specification is supplemented by design examples to illustrate its use for different FRP strengthening applications.
Download or read book Strengthening of Reinforced Concrete Structures written by L C Hollaway and published by Elsevier. This book was released on 1999-03-05 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The in situ rehabilitation or upgrading of reinforced concrete members using bonded steel plates is an effective, convenient and economic method of improving structural performance. However, disadvantages inherent in the use of steel have stimulated research into the possibility of using fibre reinforced polymer (FRP) materials in its place, providing a non-corrosive, more versatile strengthening system.This book presents a detailed study of the flexural strengthening of reinforced and prestressed concrete members using fibre reinforces polymer composite plates. It is based to a large extent on material developed or provided by the consortium which studied the technology of plate bonding to upgrade structural units using carbon fibre / polymer composite materials. The research and trial tests were undertaken as part of the ROBUST project, one of several ventures in the UK Government's DTI-LINK Structural Composites Programme.The book has been designed for practising structural and civil engineers seeking to understand the principles and design technology of plate bonding, and for final year undergraduate and postgraduate engineers studying the principles of highway and bridge engineering and structural engineering. - Detailed study of the flexural strengthening of reinforced and prestressed concrete members using fibre reinforced polymer composites - Contains in-depth case histories
Download or read book Seismic Performance of Corroded Reinforced Concrete Structures Retrofitted with FRP written by Dejian Shen and published by Springer Nature. This book was released on with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
