Download or read book Bolting Reliability for Offshore Oil and Natural Gas Operations written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-04-26 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Planning Committee on Connector Reliability for Offshore Oil and Natural Gas Operations held the Workshop on Bolting Reliability for Offshore Oil and Natural Gas Operations in Washington, D.C., on April 10-11, 2017. The workshop was designed to advance and develop a comprehensive awareness of the outstanding issues associated with fastener material failures and equipment reliability issues. Speakers and participants were also encouraged to discuss possible paths for ameliorating risks associated with fasteners used for subsea critical equipment in oil and gas operations. This publication summarizes the presentations and discussions from the workshop.
Download or read book High Performance Bolting Technology for Offshore Oil and Natural Gas Operations written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-06-12 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercially significant amounts of crude oil and natural gas lie under the continental shelf of the United States. Advances in locating deposits, and improvements in drilling and recovery technology, have made it technically and economically feasible to extract these resources under harsh conditions. But extracting these offshore petroleum resources involves the possibility, however remote, of oil spills, with resulting damage to the ocean and the coastline ecosystems and risks to life and limb of those performing the extraction. The environmental consequences of an oil spill can be more severe underwater than on land because sea currents can quickly disperse the oil over a large area and, thus, cleanup can be problematic. Bolted connections are an integral feature of deep-water well operations. High-Performance Bolting Technology for Offshore Oil and Natural Gas Operations summarizes strategies for improving the reliability of fasteners used in offshore oil exploration equipment, as well as best practices from other industrial sectors. It focuses on critical boltingâ€"bolts, studs, nuts, and fasteners used on critical connections.
Download or read book Bolting Reliability for Offshore Oil and Natural Gas Operations written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-03-26 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Planning Committee on Connector Reliability for Offshore Oil and Natural Gas Operations held the Workshop on Bolting Reliability for Offshore Oil and Natural Gas Operations in Washington, D.C., on April 10-11, 2017. The workshop was designed to advance and develop a comprehensive awareness of the outstanding issues associated with fastener material failures and equipment reliability issues. Speakers and participants were also encouraged to discuss possible paths for ameliorating risks associated with fasteners used for subsea critical equipment in oil and gas operations. This publication summarizes the presentations and discussions from the workshop.
Download or read book High Performance Bolting Technology for Offshore Oil and Natural Gas Operations written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-07-12 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercially significant amounts of crude oil and natural gas lie under the continental shelf of the United States. Advances in locating deposits, and improvements in drilling and recovery technology, have made it technically and economically feasible to extract these resources under harsh conditions. But extracting these offshore petroleum resources involves the possibility, however remote, of oil spills, with resulting damage to the ocean and the coastline ecosystems and risks to life and limb of those performing the extraction. The environmental consequences of an oil spill can be more severe underwater than on land because sea currents can quickly disperse the oil over a large area and, thus, cleanup can be problematic. Bolted connections are an integral feature of deep-water well operations. High-Performance Bolting Technology for Offshore Oil and Natural Gas Operations summarizes strategies for improving the reliability of fasteners used in offshore oil exploration equipment, as well as best practices from other industrial sectors. It focuses on critical boltingâ€"bolts, studs, nuts, and fasteners used on critical connections.
Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.
Download or read book An Introduction to the Design and Behavior of Bolted Joints Revised and Expanded written by John Bickford and published by Routledge. This book was released on 2018-05-11 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a broad-based review of the factors affecting the design, assembly and behaviour of bolted joints and their components in all industries, this work details various assembly options as well as specific failure modes and strategies for their avoidance. This edition features material on: the contact stresses between bolt head or nut face and the joint; thread forms, series and classes; the stiffness of raised face flange joints; and more.
Download or read book A Practical Guide to Piping and Valves for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-01-12 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges. Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today’s valve technology. Presents oil and gas examples and challenges relating to valves, including many illustrations from valves in different stages of projects Helps readers understand valve materials, testing, actuation, packing and preservation, also including a new model to evaluate CO2 corrosion rates on carbon steel piping Presents structured valve selection tables in each chapter to help readers pick the right valve for the right project
Download or read book Metallurgy and Corrosion Control in Oil and Gas Production written by Robert Heidersbach and published by John Wiley & Sons. This book was released on 2018-09-17 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the proper methods to assess, prevent, and reduce corrosion in the oil industry using today's most advanced technologies This book discusses upstream operations, with an emphasis on production, and pipelines, which are closely tied to upstream operations. It also examines protective coatings, alloy selection, chemical treatments, and cathodic protection—the main means of corrosion control. The strength and hardness levels of metals is also discussed, as this affects the resistance of metals to hydrogen embrittlement, a major concern for high-strength steels and some other alloys. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition updates the original chapters while including a new case studies chapter. Beginning with an introduction to oilfield metallurgy and corrosion control, the book provides in-depth coverage of the field with chapters on: chemistry of corrosion; corrosive environments; materials; forms of corrosion; corrosion control; inspection, monitoring, and testing; and oilfield equipment. Covers all aspects of upstream oil and gas production from downhole drilling to pipelines and tanker terminal operations Offers an introduction to corrosion for entry-level corrosion control specialists Contains detailed photographs to illustrate descriptions in the text Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition is an excellent book for engineers and related professionals in the oil and gas production industries. It will also be an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production.
Download or read book Project Management in the Oil and Gas Industry written by Mohamed A. El-Reedy and published by John Wiley & Sons. This book was released on 2016-02-19 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil and gas projects have special characteristics that need a different technique in project management. The development of any country depends on the development of the energy reserve through investing in oil and gas projects through onshore and offshore exploration, drilling, and increasing facility capacities. Therefore, these projects need a sort of management match with their characteristics, and project management is the main tool to achieving a successful project. Written by a veteran project manager who has specialized in oil and gas projects for years, this book focuses on using practical tools and methods that are widely and successfully used in project management for oil and gas projects. Most engineers study all subjects, but focus on project management in housing projects, administration projects, and commercial buildings or other similar projects. However, oil and gas projects have their own requirements and characteristics in management from the owners, engineering offices, and contractors’ side. Not only useful to graduating engineers, new hires, and students, this volume is also an invaluable addition to any veteran project manager’s library as a reference or a helpful go-to guide. Also meant to be a refresher for practicing engineers, it covers all of the project management subjects from an industrial point of view specifically for petroleum projects, making it the perfect desktop manual. Not just for project managers and students, this book is helpful to any engineering discipline or staff in sharing or applying the work of a petroleum project and is a must-have for anyone working in this industry.
Download or read book Subsea Valves and Actuators for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-05-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today’s subsea technology. Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies Learn and review the applicable standards and specifications from API and ISO in one convenient location Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)
Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.
Download or read book Subsea Engineering Handbook written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2012-01-13 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subsea production systems, overview of subsea engineering, subsea field development, subsea distribution system. Flow assurance and system engineering. Susea structure and equiment. Subsea umbilical, risers and flowlines.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Corrosion in the Petrochemical Industry Second Edition written by and published by ASM International. This book was released on 2015-12-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.
Download or read book Oil 101 written by Morgan Downey and published by WOODEN TABLE PressLLC. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Since 1859, oil has enabled and defined our economic, social and political landscape. Throughout this time, abundant supply ensured low, stable prices and the inner workings of the oil industry remained relatively obscure. Following a century and a half of relative calm, oil prices have become much more volatile as the sustainability and growth of reliable supply sources have been brought into question. This book provides a guide to oil; from its history, to sources of supply and drivers of demand; from how prices are determined daily in global wholesale oil markets, to how those markets are connected to prices at the pump." -- Book jacket.
Download or read book Case Studies of Material Corrosion Prevention for Oil and Gas Valves written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2022-06-07 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Case Studies of Material Corrosion Prevention for Oil and Gas Valves delivers a critical reference for engineers and corrosion researchers. Packed with nearly 30 real-world case studies, this reference gives engineers standardized knowledge on how to maintain, select and prevent typical corrosion problems in a variety of oil and gas settings. Subsea, offshore, refineries and processing plants are all included, covering a variety of challenges such as chloride stress cracking, how to use Teflon powder to prevent cross contamination, and carbon dioxide corrosion. Organized for quick discovery, this book gives engineers a much-needed tool to safely protect their assets and the environment. Engineers working in oil and gas operations understand that corrosion is a costly expense that increases emissions and damages the environment, but many standards do not provide practical examples with solutions, leaving engineers to learn through experience. This resource provides comprehensive information on topics of interest. Provides solutions to common oil and gas corrosion valve failures with standard case studies Helps readers improve safety and reliability with the addition of references for further training Presents tactics on how to reduce environmental impact and use methods to prevent corrosion across offshore, subsea and refinery activities
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems