Download or read book Boiling Heat Transfer for Cryogenics written by J. D. Seader and published by . This book was released on 1965 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: An extensive survey of available information from the literature on heat transfer to boiling hydrogen, nitrogen, and oxygen is presented. Included are a bibliography of available experimental data, a summary of boiling theory, graphical comparisons of the experimental data, and compilations of pertinent physical properties for each of the three cryogenic fluids. Based upon the results of the survey, recommendations are made for a test program to provide critical information there data are lacking.
Download or read book Boiling Heat Transfer for Oxygen Nitrogen Hydrogen and Helium written by E. G. Brentari and published by . This book was released on 1965 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study was conducted to provide an orderly examination of the information relative to boiling heat transfer for four cryogenic fluids.The general approach has been to examine experimental data with respect to the predictive correlations which would.
Download or read book A Survey of the Literature on Heat Transfer from Solid Surfaces to Cryogenic Fluids written by Robert J. Richards and published by . This book was released on 1961 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bibliography of 156 references in heat transfer from solid surfaces to fluids and related phenomena is presented. Heat transfer data obtained from experimental work on cryogenic fluids are presented in graphical form. The theoretical and empirical formulations appearing in the references are presented. In those cases where sufficient information is available to make numerical computations, the formulations are presented graphically to permit comparison with the results of the experimental work.
Download or read book Boiling Heat Transfer written by R.T. Lahey Jr. and published by Elsevier. This book was released on 2013-10-22 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers the modern developments in boiling heat transfer and two-phase flow, and is intended to provide industrial, government and academic researchers with state-of-the-art research findings in the area of multiphase flow and heat transfer technology. Special attention is given to technology transfer, indicating how recent significant results may be used for practical applications. The chapters give detailed technical material that will be useful to engineers and scientists who work in the field of multiphase flow and heat transfer. The authors of all chapters are members of the CMR at Rensselaer, a research centre specializing in the state-of-the-art in multiphase science.
Download or read book Heat and Mass Transfer in Refrigeration and Cryogenics written by J. Bougard and published by Springer. This book was released on 1987-07-30 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a Special Session of an International Symposium, held in Dubrovnik, September 1-5, 1986, and organized by the International Centre for Heat and Mass Transfer (ICHMT)
Download or read book boiling heat transfer with cryogenic fluids at standard fractional and near zero gravityl written by herman merte, jr, john a clark and published by . This book was released on 1963 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book BOILING HEAT TRANSFER TO CRYOGENIC FLUIDS Volume 13 written by FH. CASS and published by . This book was released on 1971 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Studies in Boiling Heat Transfer to Cryogenic Liquids written by Philip George Kosky and published by . This book was released on 1966 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boiling Heat Transfer for Cryogenics written by J. D. Seader and published by . This book was released on 1964 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer at Low Temperatures written by Walter Frost and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purposes of this book are to provide insight and to draw attention to problems peculiar to heat transfer at low temperatures. This does not imply that the theories of classical heat transfer fail at low temperatures, but rather that many of the approximations employed in standard solutions techniques are not valid in this regime. Physical properties, for example, have more pronounced variations at low temperatures and cannot, as is conventionally done, be held constant. Fluids readily become mixtures of two or more phases and their analysis is different from that for a single-phase fluid. These and other problems which occur more frequently at low temperatures than at standard conditions are discussed in this book. Although the title specifies heat transfer, the book also contains a very comprehensive chapter on two-phase fluid flow and a partial chapter on the flow of fluids in the thermodynamically critical state. Emphasis is placed on those flow phenomena that occur at low temperatures. Flow analyses are, of course, a prerequisite to forced-convection heat transfer analyses, and thus these chapters add continuity to the text. The book is primarily written for the design engineer, but does broach many topics which should prove interesting to the researcher. For the student and teacher the book will serve as a useful reference and possibly as a text for a special topics course in heat transfer.
Download or read book Cryogenic Heat Transfer written by Randall F. Barron and published by CRC Press. This book was released on 2017-12-19 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogenic Heat Transfer, Second Edition continues to address specific heat transfer problems that occur in the cryogenic temperature range where there are distinct differences from conventional heat transfer problems. This updated version examines the use of computer-aided design in cryogenic engineering and emphasizes commonly used computer programs to address modern cryogenic heat transfer problems. It introduces additional topics in cryogenic heat transfer that include latent heat expressions; lumped-capacity transient heat transfer; thermal stresses; Laplace transform solutions; oscillating flow heat transfer, and computer-aided heat exchanger design. It also includes new examples and homework problems throughout the book, and provides ample references for further study. New in the Second Edition: Expands on thermal properties at cryogenic temperatures to include latent heats and superfluid helium Develops the material on conduction heat transfer and divides it into four separate chapters to facilitate understanding of the separate features and computational techniques in conduction heat transfer Introduces EES (Engineering Equation Solver), a computer-aided design tool, and other computer applications such as Maple Describes special features of heat transfer at cryogenic temperatures such as analysis with variable thermal properties, heat transfer in the near-critical region, Kapitza conductance, and network analysis for free-molecular heat transfer Includes design procedures for cryogenic heat exchangers Cryogenic Heat Transfer, Second Edition discusses the unique problems surrounding conduction heat transfer at cryogenic temperatures. This second edition incorporates various computational software methods, and provides expanded and updated topics, concepts, and applications throughout. The book is designed as a textbook for students interested in thermal problems occurring at cryogenic temperatures and also serves as reference on heat transfer material for practicing cryogenic engineers.
Download or read book Boiling Heat Transfer and Multi phase Flow written by University of Michigan. Engineering Summer Conferences and published by . This book was released on 1968 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book BOILING HEAT TRANSFER TO CRYOGENIC FLUIDS Volume 7 written by IR. MCDOUGALL and published by . This book was released on 1969 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1985-05-29 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer
Download or read book Advances in Cryogenic Engineering written by K.D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1961 Cryogenic Engineering Conference Committee is pleased to present the papers of the 1961 Cryogenic Engineering Conference. We are grateful to have had the University of Michigan at Ann Arbor, Michigan as our host for the seventh annual meeting of this group. The Conference Committee in presenting the papers oftbis Conference takes this opportunity to acknowledge the assistance of an Editorial Committee in the selection of papers for the program. Since over one hundred and twenty papers were submitted, their task of screening and evaluating the papers was a dif ficult one. The Committee guided by G. j. V an Wylen, who also served as chair man of the Conference Committee, included R. W. Arnett, B. W. Birmingham, D. B. Chelton, R. j. Corruccini, C. j. Guntner, M. j. Hiza, R. B. jacobs, A. J. Kidnay, R. H. Kropschot, j. Macinko, D. B. Mann, R. P. Mikesell, R. L. Powell, J. R. Purcell, R. P. Reed, R. j. Richards, A. F. Schmidt, R. B. Stewart, and K. A. Warren.
Download or read book Advances in Cryogenic Engineering written by K. D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The University of Colorado and the National Bureau of Standards have once again served as hosts for the Cryogenic Engineering Conference in Boulder, Colorado. In presenting the papers of this twelfth annual meeting, the 1966 Cryogenic Engineering Conference Committee has again recognized the excellent cooperation which has existed between these two organizations over the past decade with regard to both cryogenic research and conference activity. This cooperation was demonstrated not only at the 1966 Cryogenic Engineering Conference but also at the International Institute of Refrigeration, Commission I Meeting, which was also hosted by these two organizations immediately following the Cryogenic Engineering Conference. These two meetings have provided attendees with one of the most comprehensive coverages of cryogenic topics that has ever been presented at one location. Emphasis on major international advances in helium technology at the International Institute of Refrigeration, Commission I Meeting has been possible largely through the National Science Foundation Grant GK 1116 to the University of Colorado. The Cryogenic Engineering Conference Committee gratefully acknowledges this support because of its valuable international contribution to the Cryogenic Engineering Conference. As in the past, the Cryogenic Engineering Conference Committee is grateful for the continued assistance of all the dedicated workers in the cryogenic field who have contributed their time reviewing the preliminary papers for the program and the final manuscripts for this volume.
Download or read book INCIPIENT BOILING OF CRYOGENIC LIQUIDS written by KENNETH J. COELING, HERNAN MERTE, JR. and published by . This book was released on 1968 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
