Download or read book Convective Boiling and Condensation written by John G. Collier and published by Clarendon Press. This book was released on 1994-05-19 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Third edition of a well-known and well established text both in industry and for teaching * Fully up-to-date and includes extra problems This book is an aid to heat exchanger design written primarily for design and development engineers in the chemical process, power generation, and refrigeration industries. It provides a comprehensive reference on two-phase flows, boiling, and condensation. The text covers all the latest advances like flows over tube bundles and two-phase heat transfer regarding refrigerants and petrochemicals. Another feature of this third edition is many new problems at chapter ends to enhance its use as a teaching text for graduate and post-graduate courses on two-phase flow and heat transfer. - ;This book is written for practising engineers as a comprehensive reference on two-phase flows, boiling, and condensation. It deals with methods for estimating two-phase flow pressure drops and heat transfer rates. It is a well-known reference book in its third edition and is also used as a text for advanced university courses. Both authors write from practical experience as both are professional engineers. -

Download or read book Heat Transfer in Condensation and Boiling written by Karl Stephan and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: I welcome the opportunity to have my book translated, because of the great emphasis on two-phase flow and heat transfer in the English-speaking world, as related to research, university education, and industrial practice. The 1988 Springer-Verlag edition of "Warmeiibergang beim Kondensieren und beim Sieden" has been enlarged to include additional material on falling film evaporation (Chapter 12) and pressure drop in two-phase flow (Chapter 13). Minor errors in the original text have also been corrected. I would like to express my sincere appreciation to Professor Green, Asso ciate Professor of German at Rensselaer, for his excellent translation and co operation. My thanks go also to Professor Bergles for his close attention to technical and linguistic details. He carefully read the typescript and made many comments and suggestions that helped to improve the manuscript. I hope that the English edition will meet with' a favorable reception and contribute to better understanding and to progress in the field of heat transfer in condensation and boiling. February 1992 K. Stephan Preface to the German-Language Edition This book is a continuation of the series "Heat and Mass Transfer" edited by U. Grigull, in which three volumes have already been published. Its aim is to acquaint students and practicing engineers with heat transfer during condensa tion and boiling, and is intended primarily for students and engineers in mechanical, chemical, electrical, and industrial processing engineering.

Download or read book Liquid Vapor Phase Change Phenomena written by Van P. Carey and published by CRC Press. This book was released on 2018-05-02 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid-Vapor Phase-Change Phenomena presents the basic thermophysics and transport principles that underlie the mechanisms of condensation and vaporization processes. The text has been thoroughly updated to reflect recent innovations in research and to strengthen the fundamental focus of the first edition. Starting with an integrated presentation of the nonequilibrium thermodynamics and interfacial phenomena associated with vaporization and condensation, coverage follows of the heat transfer and fluid flow mechanisms in such processes. The second edition includes significant new material on the nanoscale and microscale thermophysics of boiling and condensation phenomena and the use of advanced computational tools to create new models of phase-change events. The importance of basic phenomena to a wide variety of applications is emphasized and illustrated throughout using examples and problems. Suitable for senior undergraduate and first-year graduate students in mechanical or chemical engineering, the book can also be a helpful reference for practicing engineers or scientists studying the fundamental physics of nucleation, boiling and condensation.

Download or read book Heat Transfer Engineering written by C. Balaji and published by Academic Press. This book was released on 2020-11-21 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer Engineering: Fundamentals and Techniques reviews the core mechanisms of heat transfer and provides modern methods to solve practical problems encountered by working practitioners, with a particular focus on developing engagement and motivation. The book reviews fundamental concepts in conduction, forced convection, free convection, boiling, condensation, heat exchangers and mass transfer succinctly and without unnecessary exposition. Throughout, copious examples drawn from current industrial practice are examined with an emphasis on problem-solving for interest and insight rather than the procedural approaches often adopted in courses. The book contains numerous important solved and unsolved problems, utilizing modern tools and computational sources wherever relevant. A subsection on common issues and recent advances is presented in each chapter, encouraging the reader to explore a greater diversity of problems. - Reveals physical solutions alongside their application in practical problems, with an aim of generating interest from reality rather than dry exposition - Reviews pertinent, contemporary computational tools, including emerging topics such as machine learning - Describes the complexity of modern heat transfer in an engaging and conversational style, greatly adding to the uniqueness and accessibility of the book

Download or read book Heat Transfer in Process Engineering written by Eduardo Cao and published by McGraw Hill Professional. This book was released on 2009-08-12 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge heat transfer principles and design applications Apply advanced heat transfer concepts to your chemical, petrochemical, and refining equipment designs using the detailed information contained in this comprehensive volume. Filled with valuable graphs, tables, and charts, Heat Transfer in Process Engineering covers the latest analytical and empirical methods for use with current industry software. Select heat transfer equipment, make better use of design software, calculate heat transfer coefficients, troubleshoot your heat transfer process, and comply with design and construction standards. Heat Transfer in Process Engineering allows you to: Review heat transfer principles with a direct focus on process equipment design Design, rate, and specify shell and tube, plate, and hairpin heat exchangers Design, rate, and specify air coolers with plain or finned tubes Design, rate, and specify different types of condensers with tube or shellside condensation for pure fluids or multicomponent mixtures Understand the principles and correlations of boiling heat transfer, with their limits on and applications to different types of reboiler design Apply correlations for fired heater ratings, for radiant and convective zones, and calculate fuel efficiency Obtain a set of useful Excel worksheets for process heat transfer calculations

Download or read book Boiling Condensation and Gas liquid Flow written by P. B. Whalley and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer phenomena are an important aspect of engineering in the power and process industries. `... provides a useful introduction to these very real problems in industrial heat transfer.' Contemporary Physics.

Download or read book Heat Transfer Equipment Design written by R. K. Shah and published by CRC Press. This book was released on 1988-07-01 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Phase Change written by S.G. Kandlikar and published by Routledge. This book was released on 2019-01-22 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa

Download or read book Encyclopedia Of Two phase Heat Transfer And Flow Iii Macro And Micro Flow Boiling And Numerical Modeling Fundamentals A 4 volume Set written by John R Thome and published by World Scientific. This book was released on 2018-03-13 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set III of this encyclopedia is a new addition to the previous Sets I and II. It contains 26 invited chapters from international specialists on the topics of numerical modeling of two-phase flows and evaporation, fundamentals of evaporation and condensation in microchannels and macrochannels, development and testing of micro two-phase cooling systems for electronics, and various special topics (surface wetting effects, microfin tubes, two-phase flow vibration across tube bundles). The chapters are written both by renowned university researchers and by well-known engineers from leading corporate research laboratories. Numerous 'must read' chapters cover the fundamentals of research and engineering practice on boiling, condensation and two-phase flows, two-phase heat transfer equipment, electronics cooling systems, case studies and so forth. Set III constitutes a 'must have' reference together with Sets I and II for thermal engineering researchers and practitioners.

Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Elsevier. This book was released on 2006 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.

Download or read book Heat Exchanger Design Handbook Vol 1 Heat exchanger theory Vol 2 Fluid mechanics and heat transfer Vol 3 Thermal and hydraulic design of heat exchangers Vol 4 Mechanical design of heat exchangers Vol 5 Physical properties written by Ernst U. Schlünder and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Two Phase Flow Boiling and Condensation written by S. Mostafa Ghiaasiaan and published by Cambridge University Press. This book was released on 2014-08-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to gas-liquid two-phase flow, boiling and condensation for graduate students, professionals, and researchers in mechanical, nuclear, and chemical engineering. The book provides a balanced coverage of two-phase flow and phase change fundamentals, well-established art and science dealing with conventional systems, and the rapidly developing areas of microchannel flow and heat transfer. It is based on the author's more than 15 years of teaching experience. Instructors teaching multiphase flow have had to rely on a multitude of books and reference materials. This book remedies that problem by covering all the topics that are essential for a graduate first course. Among the important areas that are discussed in the book, and are not adequately covered by virtually all the available textbooks, are: two-phase flow model conservation equations and their numerical solution; condensation with and without noncondensables; and two-phase flow, boiling, and condensation in mini and microchannels.

Download or read book Direct Contact Heat Transfer written by Frank Kreith and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: to increase the use of direct contact processes, the National Science Foundation sup ported a workshop on direct contact heat transfer at the Solar Energy Research Insti tute in the summer of 1985. We served as organizers for this workshop, which em phasized an area of thermal engineering that, in our opinion, has great promise for the future, but has not yet reached the point of wide-spread commercial application. Hence, a summary of the state of knowledge at this point is timely. The workshop had a dual objective: 1. To summarize the current state of knowledge in such a form that industrial practi tioners can make use of the available information. 2. To indicate the research and development needed to advance the state-of-the-art, indicating not only what kind of research is needed, but also the industrial poten tial that could be realized if the information to be obtained through the proposed research activities were available.

Download or read book A Textbook on Heat Transfer written by S.P. Sukhatme and published by Universities Press. This book was released on 2005 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic text deals with the elementary aspects of heat transfer, with special emphasis on the fundamental laws so that the subject is perceived by the students as both a science and an art. The text is supported by a large number of solved examples.

Download or read book HEAT TRANSFER SECOND EDITION written by DUTTA, BINAY K. and published by PHI Learning Pvt. Ltd.. This book was released on 2023-07-01 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for courses in heat transfer for undergraduates, not only in chemical engineering and related disciplines of biochemical engineering, and chemical technology, but also in mechanical engineering and production engineering. The author provides the reader with a thorough account of the fundamental principles and their applications to engineering practice, including a survey of the recent developments in heat transfer equipment. A whole chapter has been devoted to explain the concept of the heat transfer coefficient to give a feel of its importance in tackling problems of convective heat transfer. The use of the important heat transfer correlations has been illustrated with carefully selected examples. In addition to an overview of the construction, operation and selection of equipment for heating, cooling, and phase change (boiling, condensation and evaporation), the revised second edition provides glimpses of the present trends and practice relating to heat transfer equipment in process industries and illustrative photographs of the state-of-the-art equipment. The design procedures of more common heat exchangers such as shell-and-tube, air-cooled, plate-and-frame, spiral plate, and spiral tube have been illustrated with realistic examples. Several new examples and problems have been included. Comparison with ASPEN simulation results has been given for a shell-and-tube exchanger. Cost calculation of a heat exchanger from the first principles is included. Recent topics such as heat transfer in microchannels and nano-fluids, and bio-heat transfer have been introduced. WHAT IS NEW TO THIS EDITION? • Thoroughly recast chapters providing glimpses of the recent developments in theory and application areas of the subject. • A new chapter (Chapter 12) on Microchannel, Nano-and Bio-heat Transfer added to introduce the readers to the newer areas of research and application. • Chapter 8 on Heat Exchangers has been thoroughly revised in consideration of the practical and direct use of the theoretical principles. • Topics such as the Bell Method of heat exchanger design, sizing of air-cooled heat exchangers, plate heat exchanger, spiral plate and spiral tube heat exchangers are some of the fresh additions • Results of a few ASPEN simulations are given in Appendix B. Cost estimation of a S&T heat exchanger from first principles is described in Appendix C. Target Audience • B.Tech. (chemical engineering and related disciplines of biochemical engineering and chemical technology). • Also for courses on heat transfer in mechanical and production engineering.

Download or read book Two Phase Flow Heat Exchangers written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-phase flow heat exchangers are vital components of systems for power generation, chemical processing, and thermal environment control. The art and science of the design of such heat exchangers have advanced considerably in recent years. This is due to better understanding of the fundamentals of two-phase flow and heat transfer in simple geometries, greater appreciation of these processes in complex goemetries, and enhanced predictive capability through use of complex computer codes. The subject is clearly of great fundamental and practical importance. The NATO ASIan Thermal-Hydraulic Fundamentals and Design of Two-Phase Flow Heat Exchangers was held in Povoa de Varzim (near Porto), Portugal, July 6-17, 1987. participating in the organization of" the ASI were the Department of Mechanical Engineering and the Clean Energy Research Institute, University of Miami; Universidade do Porto; and the Department of Mechanical Engineering, Aeronautical Eng ineer ing, and Mechanics, Rensselaer Polytechnic Institute. The ASI was arranged primarily as a high-level teaching activity by experts representing both academic and industrial viewpoints. The program included the presentation of invited lectures, a limited number of related technical papers and discussion sessions.

Download or read book Liquid Vapor Phase Change Phenomena written by Van P. Carey and published by CRC Press. This book was released on 2020-02-28 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the second edition of Liquid-Vapor Phase-Change Phenomena was written, research has substantially enhanced the understanding of the effects of nanostructured surfaces, effects of microchannel and nanochannel geometries, and effects of extreme wetting on liquid-vapor phase-change processes. To cover advances in these areas, the new third edition includes significant new coverage of microchannels and nanostructures, and numerous other updates. More worked examples and numerous new problems have been added, and a complete solution manual and electronic figures for classroom projection will be available for qualified adopting professors.