Download or read book A Quick Guide to Pressure Relief Valves PRVs written by Clifford Matthews and published by John Wiley & Sons. This book was released on 2005-07-22 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable book systematically guides you through Pressure Relief Valves and how they work. It shows how protective devices perform an important function in preventing the accumulation of overpressure that can result in failure and the uncontrolled release of stored energy. They are therefore categorised as safety critical items of engineering equipment. The book goes on to show that their design and testing is heavily controlled by published technical standards because many countries are covered by statutory legislation. The content of the book shows that service damage and degradation mechanisms are outlined for various applications – PRVs and bursting discs are used in a wide variety of process conditions, ranging from clean service to heavily corrosive process fluids. This results in a correspondingly large number of damage mechanisms that can prevent them from working if they are not inspected and tested correctly. Risk based inspection procedures are introduced in this book as a method of minimising the chances of failure, and therefore maintaining high levels of safety. This Quick Guide to Pressure Relief Valves is intended to provide easily accessible technical information for engineers and technicians involved in the operation, testing and maintenance of pressure systems. It also covers other types of protective devises such as bursting discs.
Download or read book The Safety Relief Valve Handbook written by Marc Hellemans and published by Elsevier. This book was released on 2009-08-31 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Safety Valve Handbook is a professional reference for design, process, instrumentation, plant and maintenance engineers who work with fluid flow and transportation systems in the process industries, which covers the chemical, oil and gas, water, paper and pulp, food and bio products and energy sectors. It meets the need of engineers who have responsibilities for specifying, installing, inspecting or maintaining safety valves and flow control systems. It will also be an important reference for process safety and loss prevention engineers, environmental engineers, and plant and process designers who need to understand the operation of safety valves in a wider equipment or plant design context. - No other publication is dedicated to safety valves or to the extensive codes and standards that govern their installation and use. A single source means users save time in searching for specific information about safety valves - The Safety Valve Handbook contains all of the vital technical and standards information relating to safety valves used in the process industry for positive pressure applications. - Explains technical issues of safety valve operation in detail, including identification of benefits and pitfalls of current valve technologies - Enables informed and creative decision making in the selection and use of safety valves - The Handbook is unique in addressing both US and European codes:- covers all devices subject to the ASME VIII and European PED (pressure equipment directive) codes;- covers the safety valve recommendations of the API (American Petroleum Institute);- covers the safety valve recommendations of the European Normalisation Committees;- covers the latest NACE and ATEX codes;- enables readers to interpret and understand codes in practice - Extensive and detailed illustrations and graphics provide clear guidance and explanation of technical material, in order to help users of a wide range of experience and background (as those in this field tend to have) to understand these devices and their applications - Covers calculating valves for two-phase flow according to the new Omega 9 method and highlights the safety difference between this and the traditional method - Covers selection and new testing method for cryogenic applications (LNG) for which there are currently no codes available and which is a booming industry worldwide - Provides full explanation of the principles of different valve types available on the market, providing a selection guide for safety of the process and economic cost - Extensive glossary and terminology to aid readers' ability to understand documentation, literature, maintenance and operating manuals - Accompanying website provides an online valve selection and codes guide.
Download or read book Valve Selection Handbook written by Peter Smith and published by Elsevier. This book was released on 2004-01-24 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valves are the components in a fluid flow or pressure system that regulate either the flow or the pressure of the fluid. They are used extensively in the process industries, especially petrochemical. Though there are only four basic types of valves, there is an enormous number of different kinds of valves within each category, each one used for a specific purpose. No other book on the market analyzes the use, construction, and selection of valves in such a comprehensive manner. - Covers new environmentally-conscious equipment and practices, the most important hot-button issue in the petrochemical industry today - Details new generations of valves for offshore projects, the oil industry's fastest-growing segment - Includes numerous new products that have never before been written about in the mainstream literature
Download or read book Pressure Relief Devices written by Mohammad A. Malek and published by McGraw Hill Professional. This book was released on 2005-10-27 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the boiler, piping and pressure vessel industry, pressure relief devices are considered one of the most important safety components. These Devices are literally the last line of defense against catastrophic failure or even lose of life. Written in plain language, this fifth book in the ASME Simplified series addresses the various codes and recommended standards of practice for the maintenance and continued operations of pressure relief valves as specified by the American Society of Mechanical Engineers and the American Petroleum Institute. Covered in this book are: preventive maintenance procedures, methods for evaluation of mechanical components and accepted methods for cleaning, adjusting and lubricating various components to assure continued operation and speed performance as well as procedures for recording and evaluating these items.
Download or read book Practical Guide to Industrial Safety written by Nicholas P. Cheremisinoff and published by CRC Press. This book was released on 2000-10-12 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to industrial safety. It seeks to assist specialists in managing operations in industrial settings, including high-risk personal exposure such as inhalation hazards and direct chemical contact. It covers hazards in the chemical process industries, inhalation hazards in refineries, indoor air quality management, personal protective
Download or read book Technical Paper Bureau of Mines written by United States. Bureau of Mines and published by . This book was released on 1932 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Overpressure Protection in the Process Industry written by Marc Hellemans and published by Elsevier. This book was released on 2022-01-17 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overpressure Protection in the Process Industry: A Critical View provides a practical and pragmatic guidance for anyone dealing with overpressure protection in the process industry. The book explains the background of complicated international codes and regulations, offering a pragmatic and practical approach on how these codes can be interpreted for specific cases. The book also gives a critical view on these codes and regulations and where they do or don't make sense, along with the challenges in some instances, including technical and practical argumentations. Finally, the book covers specific problem areas and sizing methods when using safety relief devices as overpressure protection, such as how to handle installation, backpressures, blowdowns, the 3% rule, types of chatter and other destructive forces in relief devices. - Helps readers understand and apply codes and regulations in a pragmatic way - Provides sizing guidance on most overpressure scenarios and how to approach them in a pragmatic way - Creates awareness about the possible dangers of overpressure, especially in aging plants and how modifications on the process can jeopardize the overpressure protection - Addresses non-regulated types of overpressure protection in a process plant, such as the overpressure and vacuum protection of low-pressure storage tanks and tank blanketing
Download or read book Instrument Engineers Handbook Volume Two written by Bela G. Liptak and published by CRC Press. This book was released on 2018-10-08 with total page 2460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest update to Bela Liptak's acclaimed "bible" of instrument engineering is now available. Retaining the format that made the previous editions bestsellers in their own right, the fourth edition of Process Control and Optimization continues the tradition of providing quick and easy access to highly practical information. The authors are practicing engineers, not theoretical people from academia, and their from-the-trenches advice has been repeatedly tested in real-life applications. Expanded coverage includes descriptions of overseas manufacturer's products and concepts, model-based optimization in control theory, new major inventions and innovations in control valves, and a full chapter devoted to safety. With more than 2000 graphs, figures, and tables, this all-inclusive encyclopedic volume replaces an entire library with one authoritative reference. The fourth edition brings the content of the previous editions completely up to date, incorporates the developments of the last decade, and broadens the horizons of the work from an American to a global perspective. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.
Download or read book An Introduction to Instruments and Control Systems for Boiler Plants for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2023-03-29 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for mechanical engineers, electrical engineers and construction managers interested in instruments and controls for boiler plants. Here is what is discussed: 1. GENERAL, 2. COMBUSTION CONTROLS, 3. BOILER CONTROLS, 4. NONBOILER CONTROLS, 5. CONTROL PANELS, 6. FIELD INSTRUMENTATION.
Download or read book Relief Systems Handbook written by Cyril F. Parry and published by IChemE. This book was released on 2004-09 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This practical guide fills a gap in the literature on pressure relief design, operation and maintenance, covering the applicability to and reliability of different pressure relief devices in individual situations.
Download or read book Handbook of Pollution Prevention and Cleaner Production Vol 1 Best Practices in the Petroleum Industry written by Nicholas P Cheremisinoff and published by William Andrew. This book was released on 2009-09-22 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new Handbook provides a series of reference guides to cleaner production methods, technologies, and practices for key industry sectors. Each volume covers, for each industry sector: * the manufacturing technologies * waste management * pollution * methods for estimating and reporting emissions * treatment and control technologies * worker and community health risk exposures * cost data for pollution management * cleaner production and prevention alternatives Best Practices in The Petroleum Industry provides an overview of refineries and gas plant operations and identifies the key Environmental Aspects, supported by case studies of major incidents that resulted in catastrophic releases of oil and refined products, and a critical assessment of the methodology and calculation procedures that the industry relies on in preparing emissions inventories. The authors offer alternative approaches to providing more accurate emissions estimates, and guidelines on cleaner production and pollution prevention practices for improving overall environmental performance. - Overview of the key Environmental Aspects of gas plant operations and refineries - Case studies of major incidents that resulted in catastrophic releases of oil and refined products, including the Santa Barbara oil spill of 1969 and the EXXON Valdez incident - Provides guidelines on cleaner production and pollution prevention practices for improving overall environmental performance
Download or read book Boiler Operator s Handbook Second Edition written by P.E. Heselton and published by CRC Press. This book was released on 2020-11-26 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written specifically for boiler plan operators and supervisors who want to learn how to lower plant operating costs, as well as how to operate plants of all types and sizes more wisely. It is newly revised with guidelines for HRSGs, combined cycle systems, and environmental effects of boiler operation. Also included is a new chapter on refrigeration systems that addresses the environmental effects of inadvertent and intentional discharges of refrigerants. Going beyond the basics of "keeping the pressure up," the author explains in clear terms how to set effective priorities to ensure optimal plant operation, including ensuring safety and continuity of operations, preventing damage, managing environmental impact, training replacement plant operators, logging and preserving historical data, and operating the plant economically.
Download or read book Handbook of Valves and Actuators written by Brian Nesbitt and published by Elsevier. This book was released on 2011-04-19 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industries that use pumps, seals and pipes will also use valves and actuators in their systems. This key reference provides anyone who designs, uses, specifies or maintains valves and valve systems with all of the critical design, specification, performance and operational information they need for the job in hand. Brian Nesbitt is a well-known consultant with a considerable publishing record. A lifetime of experience backs up the huge amount of practical detail in this volume.* Valves and actuators are widely used across industry and this dedicated reference provides all the information plant designers, specifiers or those involved with maintenance require* Practical approach backed up with technical detail and engineering know-how makes this the ideal single volume reference* Compares and contracts valve and actuator types to ensure the right equipment is chosen for the right application and properly maintained
Download or read book Petroleum Refining Design and Applications Handbook Volume 5 written by A. Kayode Coker and published by John Wiley & Sons. This book was released on 2023-07-25 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: PETROLEUM REFINING With no new refineries having been built in decades, companies continue to build onto or reverse engineer and re-tool existing refineries. With so many changes in the last few years alone, books like this are very much in need. There is truly a renaissance for chemical and process engineering going on right now across multiple industries. This fifth and final volume in the “Petroleum Refining Design and Applications Handbook” set, this book continues the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. Besides the list below, this groundbreaking new volume describes blending of products from the refinery, applying the ternary diagrams and classifications of crude oils, flash point blending, pour point blending, aniline point blending, smoke point and viscosity blending, cetane and diesel indices. The volume further reviews refinery operational cost, cost allocation of actual usage, project and economic evaluation involving cost estimation, cash flow involving return on investment, net present values, discounted cash flow rate of return, net present values, payback period, inflation and sensitivity analysis, and so on. It reviews global effects on the refining economy, carbon tax, carbon foot print, global warming potential, carbon dioxide equivalent, carbon credit, carbon offset, carbon price, and so on. It reviews sustainability in petroleum refining and alternative fuels (biofuels and so on), impact of the overall greenhouse effects, carbon capture and storage in refineries, process intensification in biodiesel, biofuel from green diesel, acid-gas removal and emerging technologies, carbon capture and storage, gas heated reformer unit, pressure swing adsorption process, steam methane reforming for fuel cells, grey, blue and green hydrogen production, new technologies for carbon capture and storage, carbon clean process design, refinery of the future, refining and petrochemical industry characteristics. The text is packed with Excel spreadsheet calculations and Honeywell UniSim Design software in some examples, and it includes an invaluable glossary of petroleum and petrochemical technical terminologies. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without. Written by one of the world’s foremost authorities, this book sets the standard for the industry and is an integral part of the petroleum refining renaissance. It is truly a must-have for any practicing engineer or student in this area.
Download or read book Industrial Steam Systems written by Mojtaba Sabet and published by CRC Press. This book was released on 2016-02-03 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This clear, easy-to-follow handbook is a useful resource for engineers, architects, and plant operators. A one-stop reference for beginners and advanced readers alike, it describes industrial steam systems design and operation in simple steps. The book explains the system fundamentals, system setup, and required equipment, building, mechanical, and other code requirements, and details the execution of a sample project. It also explains the equipment operation principle and describes best design practices for system setup, piping and instrumentation, equipment sizing, pipe sizing, and equipment selection.
Download or read book Surface Production Operations Volume 2 written by Ken Arnold and published by Elsevier. This book was released on 1999-08-12 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition puts the most current information about gas-handling systems and facilities at your fingertips. The authors channeled their classroom and field experience into this volume, which features many new sections such as:* Heat recovery units* Kinetic inhibitors and anti-agglomerators* Trays and packing for distillation and absorption towers* Compressor valves* Foundation design considerations for reciprocating compressors* Pressure vessel issues and components * Nox reduction in engines and turbines* Safety management systemsThis book walks you through the equipment and processes used in gas-handling operations to help you design and manage a production facility. Production engineers will keep this volume on the desktop for the latest information on how to DESIGN, SPECIFY, and OPERATE gas-handling systems and facilities. The book allows engineers with little or background in production facility design to easily locate details about equipment, processes, and design parameters. With this volume, you will more completely comprehend the techniques of handling produced fluids from gas wells so your facility can be more efficient and productive.* Revised edition puts the most current information about gas-handling systems at your fingertips* Features brand new sections!
