Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Ziegler Natta Catalysts Polymerizations written by John Jr. Boor and published by Elsevier. This book was released on 2012-12-02 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ziegler-Natta Catalysts and Polymerizations reviews the general aspects of Ziegler-Natta catalysts and polymerizations of olefins, dienes, and many other types of monomers. Topics covered include the physical state of the polymer during polymerization; modification of Ziegler-Natta catalysts by third components; and termination of polymer chain growth. The oxidation state of catalysts and active centers is also discussed, along with copolymerizations and block polymerizations. This book is comprised of 23 chapters and begins with an overview of Ziegler-Natta catalysts and polymerizations, their historical origins, scientific and commercial importance, and major advances in polymer science. The next chapter focuses on definitions and stereochemistry of Ziegler-Natta catalysts, together with analytical methods used to identify and quantitatively measure their structures. Some of the polymers produced commercially with Ziegler-Natta catalysts are considered. The discussion then turns to mechanisms for initiating and propagating olefins; mechanisms for stereochemical control of conjugated and nonconjugated dienes; and the basic kinetic parameters that characterize Ziegler-Natta polymerizations. This monograph is written especially for chemistry and engineering graduate students and for industrial chemists, engineers, and managers who may become involved in a Ziegler-Natta problem.
Download or read book Stereoselective Polymerization with Single Site Catalysts written by Lisa S. Baugh and published by CRC Press. This book was released on 2007-11-29 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: New synthetic techniques allow chemists to modify polymer microstructures more precisely than ever, making it possible to design materials that meet increasingly demanding performance requirements. Written and edited by experts in the field, Stereoselective Polymerization with Single-Site Catalysts reviews how the relative stereochemistry of
Download or read book New Methods Polymer Synthesis written by J. R. Ebdon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most practitioners and students of polymer chemistry are familiar, in general terms at least, with the established methods of polymer synthesis - radical, anionic, cationic and coordination addition polymerization, and stepwise con densation and rearrangement polymerization. These methods are used to synthesize the majority of polymers used in the manufacture of commercially important plastics, fibres, resins and rubbers, and are covered in most introduc tory polymer chemistry textbooks and in most undergraduate and graduate courses on polymer science. Fewer polymer chemists, however, have much familiarity with more recent developments in methods of polymer synthesis, unless they have been specifically involved for some time in the synthesis of speciality polymers. These developments include not only refinements to established methods but also new mechanisms of polymerization, such as group transfer and metathesis polymerization and novel non-polymerization routes to speciality polymers involving, for example, the chemical modification of preformed polymers or the linking together of short terminally functionalized blocks.
Download or read book Polypropylene and other Polyolefins written by S. van der Ven and published by Elsevier. This book was released on 2012-12-02 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with polyolefins prepared via Ziegler-Natta catalysis, from a polymer chemist's viewpoint, i.e. with emphasis on their preparation and on their basic composition and properties. In addition to chapters on catalysts, polymerization behaviour and polymer properties such as tacticity, crystallinity, morphology etc., a chapter is also devoted to characterization methods. The main part of this work is reserved for polypropylene in all its forms, namely, homopolymer, random copolymer and toughened (`block') copolymers, for which extensive own-experience was present. The other polyolefins are also covered by means of a thorough literature review.This book is intended for scientists active in the field of polyolefins, including catalyst development, but should also prove an invaluable medium in academia to illustrate the growth of understanding in catalysis, kinetics and characterization of a commercially very important class of polymers.
Download or read book Principles of Polymer Design and Synthesis written by Wei-Fang Su and published by Springer Science & Business Media. This book was released on 2013-10-09 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can a scientist or engineer synthesize and utilize polymers to solve our daily problems? This introductory text, aimed at the advanced undergraduate or graduate student, provides future scientists and engineers with the fundamental knowledge of polymer design and synthesis to achieve specific properties required in everyday applications. In the first five chapters, this book discusses the properties and characterization of polymers, since designing a polymer initially requires us to understand the effects of chemical structure on physical and chemical characteristics. Six further chapters discuss the principles of polymerization reactions including step, radical chain, ionic chain, chain copolymerization, coordination and ring opening. Finally, material is also included on how commonly known polymers are synthesized in a laboratory and a factory. This book is suitable for a one semester course in polymer chemistry and does not demand prior knowledge of polymer science.
Download or read book New Methods of Polymer Synthesis written by J.R. Ebdon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most practitioners and students of polymer chemistry are familiar, in general terms at least, with the established methods of polymer synthesis - radical, anionic, cationic and coordination addition polymerization, and stepwise con densation and rearrangement polymerization. These methods are used to synthesize the majority of polymers used in the manufacture of commercially important plastics, fibres, resins and rubbers, and are covered in most introduc tory polymer chemistry textbooks and in most undergraduate and graduate courses on polymer science. Fewer polymer chemists, however, have much familiarity with more recent developments in methods of polymer synthesis, unless they have been specifically involved for some time in the synthesis of speciality polymers. These developments include not only refinements to established methods but also new mechanisms of polymerization, such as group transfer and metathesis polymerization and novel non-polymerization routes to speciality polymers involving, for example, the chemical modification of preformed polymers or the linking together of short terminally functionalized blocks.
Download or read book Research in Materials written by and published by . This book was released on 1988 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Elastomers Second Edition written by Anil K. Bhowmick and published by CRC Press. This book was released on 2000-11-02 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides the latest authoritative research on the developments, technology, and applications of rubbery materials. Presents structures, manufacturing techniques, and processing details for natural and synthetic rubbers, rubber-blends, rubber composites, and thermoplastic elastomers. 80% revised and rewritten material covers major advances since publication of the previous edition."
Download or read book Controlling the Morphology of Polymers written by Geoffrey R. Mitchell and published by Springer. This book was released on 2016-09-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on controlling morphology of different scales for polymers. The authors explain the need for successful control of morphology to yield target macroscopic physical properties in the application of polymers to diverse areas such as engineering materials, nanodielectrics and photonic crystals. The book combines specialized chapters with an introduction to the morphology of polymers and the range of experimental techniques available to evaluate it.
Download or read book Research in Materials written by Massachusetts Institute of Technology and published by . This book was released on 1988 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Official Gazette of the United States Patent and Trademark Office written by United States. Patent and Trademark Office and published by . This book was released on 2001 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments In Pressure Sensitive Products written by Istvan Benedek and published by CRC Press. This book was released on 2005-11-02 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first groundbreaking edition of Developments in Pressure-Sensitive Products was introduced in 1998, heavy research has resulted in substantial progress in the field. Fully updated and expanded to reflect this activity, Developments in Pressure-Sensitive Products, Second Edition provides a detailed overview of the entire range of pressure-
Download or read book Polypropylene Structure blends and Composites written by J. Karger-Kocsis and published by Springer Science & Business Media. This book was released on 1994-12-31 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although polypropylene has been marketed since the 1950s, research and development in this area is still vigorous. The consumption of polypropylene over the years has been relatively high, mainly due to the steady improvement of its property profile. Polypropylene: Structures, Blends and Composites, in three separate volumes, reflects on the key factors which have contributed to the success of polypropylene, dealing with all aspects of structure-performance relationships relevant to thermoplastic polymers and related composites. Volume 1, Structure and Morphology, deals with polymorphism in polypropylene homo- and copolymers, where molecular and supermolecular structures are covered, and the processing-induced structure development of polypropylene, showing the interrelation between the processing-induced morphology and mechanical performance. Volume 2, Copolymers and Blends, contains comprehensive surveys of the nucleation and crystallisation behaviour of the related systems. It includes the development of morphology and its effects on rheological and mechanical properties of polypropylene-based alloys and blends and a review of polypropylene-based thermoplastic elastomers. Volume 3, Composites, gives a comprehensive overview of filled and reinforced systems with polypropylene as a matrix material, with the main emphasis on processing-structure-property-interrelationships. Chapters cover all aspects of particulate filled, chopped fibre-, fibre mat- and continuous fibre-reinforced composites. Interfacial phenomena, such as adhesion, wetting and interfacial crystallisation, are also included as important aspects of this subject.
Download or read book Fascinating Fluoropolymers and Their Applications written by Bruno Ameduri and published by Elsevier. This book was released on 2020-06-17 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoropolymers are unique materials. Since the middle of the twentieth century fluropolymers have been used in applications where a wide temperature range, a high resistance to aggressive media, excellent tribological characteristics, and specific low adhesion are required. Today, researchers turn to fluoropolymers to solve new challenges and to develop materials with previously unattainable properties. Fascinating Fluoropolymers and Their Applications covers recent developments of fluoropolymer applications in energy, optical fibers, blood substitutes, textile coatings, membranes and other areas, written by experts in these fields. This volume in the Progress in Fluorine Science series is ideal for researchers and engineers who want to learn about the technology and applications of these special polymers, as well as industrial manufacturers who are interested in achieving new product characteristics in their respective industries. - Written by a global team of fluoropolymer experts - Includes use of fluoropolymer membranes for various applications in fuel cells, for gases separation, and more - Covers fluoropolymer materials with shape memory, in cardiopulmonary bypass systems, in the production of textile materials, and in other areas
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1987 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
