Download or read book Colloidal and Morphological Behavior of Block and Graft Copolymers written by Gunther Molau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The molecules of block and graft copolymers are molecules of a higher order; they consist of homopolymer subchains which are interconnected by chemical valence bonds. This structural com plexity is manifested in the unusual behavior of block and graft copolymers both in solution and in bulk. Many types of interac tions are possible in block and graft copolymers in the solid state. Polymer subchains of one molecule can interact with other polymer subchains which may belong to the same molecule or to different molecules. Since polymer chains of chemically different composition are usually incompatible, thermodynamically unfavorable as well as thermodynamically favorable interactions exist in the solid state. In solutions of block and graft copolymers, the sit uation becomes even more complex, because interactions between the solvent molecules and the various subchains of the copolymer mole cules occur in addition to the interactions between the polymer chains. This multitude of interactions gives rise to a wide spec trum of colloidal and morphological properties which have no paral lel in less complex polymer systems such as homopolymers or random copolymers. Research on the colloidal and morphological behavior of block and graft copolymers is a relatively new field of endeavor. It started in 1954, when F. M. Merrett fractionated mixtures of grafted na tural rubber with the corresponding homopolymers and observed that colloidal sols were formed at certain points during his fractional precipitations.
Download or read book Block and Graft Copolymers written by R. J. Ceresa and published by . This book was released on 1962 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alternating Copolymers written by J.M.G. Cowie and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examination of the early literature attests to the fact that the study of copolymerization was initiated when polymer science was in its infancy. It has continued to grow to a subject of major importance and has been a source of interest to both academic and industrialist alike. The wide spectrum of structures and properties available in the statistical copolymer has made this a fruitful field of exploration, but one particular and more restricted form which has held its own fascination for many is the limiting case of the strictly alternating copolymer. This is formed, in the ideal situation, when two monomers in a reaction mixture add consecutively to create a polymer chain with a regular {ABABAB} structure, irrespective of the monomer feed ratio. When this happens the resulting copolymer will always have the same composition, a feature which can be advantageous but also somewhat restrictive, as the ability to vary the properties is then limited. Within a series entitled Speciality Polymers it seems appropriate then to deal with this subject, particularly as no previous attempt has been made to draw together the various facets of alternating copolymerization into one volume. It also seems timely to present a more unified picture of the subject which will also illustrate the progress made.
Download or read book Block and Graft Copolymerization written by R. J. Ceresa and published by . This book was released on 1973 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Block and Graft Copolymerization written by R. J. Ceresa and published by . This book was released on 1976 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic Polymers written by Arpit Sand and published by BoD – Books on Demand. This book was released on 2020-03-11 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Organic Polymers, covers aspects that are of immediate concern to a new entrant to the field of polymers. Taken as a whole, these eight chapters aim to help the readers easily assimilate other specialized and exhaustive treatises on the subject. Topics dealing with the chemistry and technology of polymers are presented in a careful and logical manner so as to provide an easy and enjoyable read. Several examples and analogies are included so to make the main concepts easy to follow and tables and figures are included so that the book can serve, to a limited extent, as a hand book dealing with polysaccharides with different parameters. This book is meant for students studying polysaccharides and those working on graft copolymers and other allied polymer industries but without a formal educational background in organic polymers.
Download or read book Block Copolymers written by Allen Noshay and published by Elsevier. This book was released on 2013-10-22 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Block Copolymers: Overview and Critical Survey is a critical review of block copolymer technology and a comprehensive critical survey on the synthesis, characterization, properties, and applications of the specific block copolymer structures reported in the literature. The copolymers are organized according to segmental architecture and chemical composition. Comprised of seven chapters, this book begins with an overview of what block copolymers are, how they are made, and what they can and cannot be expected to do. The next chapter defines block copolymers and compares them with other types of polymer "hybrids," that is, polymer blends, random copolymers, and graft copolymers. The various segmental architectures that are possible with block copolymers are then described, followed by a discussion on the various synthesis techniques applicable to block copolymers; the characterization methods capable of elucidating block copolymer structures; some applications of commercially available block copolymers; and some future challenges for block copolymer technology. The last three chapters are devoted to A-B diblock copolymers, A-B-A triblock copolymers, and (A-B)n multiblock copolymers. This monograph should be useful to readers who want to become generally conversant with block copolymer technology and to those who need to delve more deeply into the subject.
Download or read book Recent Advances in Polymer Blends Grafts and Blocks written by L. Sperling and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer blends, grafts, and blocks, broadly defined, encompass all of the ways in which two or more kinds of poly mer molecules can be mixed and/or joined. Because these mate rials exhibit non-linear and often synergistic properties, they have found increasing application in our technology. Their multifarious uses have, in turn, spurred new research efforts, to find yet different ways of joining two kinds of polymer molecules, with novel physical and/or mechanical behavior patterns. In August, 1973, the Polymer Division of the American Chemical Society sponsored a symposium at its meeting in Chi cago on Polymer Blends, Grafts, and Blocks. This book collects the papers presented at that symposium. Yet, it is more than just a collection of papers, for we here display the thinking and efforts of a number of top-ranking American and foreign scientists in one of the world's more active research areas. The symposium emphasized the interrelationships among synthetic detail, morphology, and physical and mechanical properties. Several novel syntheses were presented. These include oxidation resistant thermoplastic elastomers (Holden), a graft copolymer based thermoplastic elastomer (Kennedy and Smith), a cationic graft copolymer (Kennedy, Charles, and Davidson), an AB crosslinked copolymer (Bamford and Eastmond), an interpenetrating polymer network (Donatelli, Thomas, and Sperling), and simultaneous interpenetrating networks (Frisch, Klempner, Frisch, and Ghiradella). Most polymer blends, grafts, and blocks exhibit two phases. The theory of microdomain structure was discussed (Helfand). The different ways that the two molecules can be joined together was examined (Kenney), and their topology was explored (Sperling).
Download or read book Polysaccharide Based Graft Copolymers written by Susheel Kalia and published by Springer Science & Business Media. This book was released on 2013-05-23 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renowned experts give all essential aspects of the techniques and applications of graft copolymers based on polysaccharides. Polysaccharides are the most abundant natural organic materials and polysaccharide based graft copolymers are of great importance and widely used in various fields. Natural polysaccharides have recently received more attention due to their advantages over synthetic polymers by being non-toxic, biodegradable and available at low cost. Modification of polysaccharides through graft copolymerization improves the properties of polysaccharides. Grafting is known to improve the characteristic properties of the backbones. Such properties include water repellency, thermal stability, flame resistance, dye-ability and resistance towards acid-base attack and abrasion. Polysaccharides and their graft copolymers find extensive applications in diversified fields. Applications of modified polysaccharides include drug delivery devices, controlled release of fungicides, selective water absorption from oil-water emulsions, purification of water etc.
Download or read book Functionalization of Polyolefins written by T. C. Chung and published by Academic Press. This book was released on 2002-02-28 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the significant experimental results on the functionalization of polyolefins and classifies them into several chemical methods. This book also provides information on the functional polyolefin materials. It covers: chemical approaches in the functionalization of polyolefins, and polyolefin materials and their potential applications.
Download or read book Block Copolymers written by Francisco Balta Calleja and published by CRC Press. This book was released on 2000-06-09 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: A summary of block copolymer chemical structures and synthesis. It discusses physical methods of characterization such as computer simulation, microhardness, dielectric spectroscopy, thermal mechanical relaxation, ultrasonic characterization, transmission electron microscopy, X-ray scattering, and NMR, among others. It also outlines rheological and processing parameters in the multiphase polymer systems with stable microstructures.
Download or read book Block Polymers written by S. L. Aggarwal and published by . This book was released on 1970 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Block Copolymers written by Nikos Hadjichristidis and published by John Wiley & Sons. This book was released on 2003-04-28 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers may be classified as either homopolymers, consisting of one single repeating unit, or copolymers, consisting of two or more distinct repeating units. Block copolymers contain long contiguous blocks of two or more repeating units in the same polymer chain. Covering one of the hottest topics in polymer chemistry, Block Copolymers provides a coherent overview of the synthetic routes, physical properties, and applications of block copolymers. This pioneering text provides not only a guideline for developing synthetic strategies for creating block copolymers with defined characteristics, but also a key to the relationship between the physical properties of block copolymers and the structure and dynamics of materials. Covering features of the chemistry and physics of block copolymers that are not found in comparable texts, Block Copolymers illustrates the structure-activity relationship of block copolymers and offers suggestions for the design of specific applications. Divided into five sections-Block Copolymers includes chapters on: * Block Copolymers by Chemical Modification of Precursor Polymers * Nonlinear Block Copolymers * Adsorption of Block Copolymers at Solid-Liquid Interfaces * Theory of Block Copolymer Segregation * Phase Transformation Kinetics * Block Copolymer Morphology * Block Copolymer Dynamics Polymer chemists, physicists, chemical engineers, and materials scientists, as well as graduate students in polymer science, will find Block Copolymers to be an invaluable text.
Download or read book Block Polymers written by S. L. Aggarwal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Block polymers represent another milestone in the preparation of polymers of controlled structure. Catalysts and polymerization methods that allowed the preparation of polymers in which the stereo- and geometric isomerism of the monomer units could be con trolled have indeed been among the major developments in polymer science during the last decade. The synthesis of block polymers, in which the sequence length of the comonomer units can be con trolled, portends equally important developments in the science and technology of polymers. The papers collected in this volume cover primarily the pro ceedings of the most recent symposium on block polymers, sponsored by the Division of Polymer Chemistry of the American Chemical Society. It was held in New York City during the Society's 158th National Meeting in September, 1969. Additional contributions from selected authors were invited especially for this book to achieve the most up-to-date account of the advances that have been made since the development of the thermoplastic elastomers that first brought into focus this important area of research. The first two papers in this volume draw attention to the various problems that should be considered in the preparation of block polymers of precisely defined structure from styrene and butadiene or isoprene by anionic polymerization. Characterization of block polymers presents many problems and there is a paucity of systematic work in this area. Attention has been given to the di lute solution properties of block polymers,however, in one of the papers in this volume.
Download or read book Amphiphilic Polymer Co networks written by Costas S Patrickios and published by Royal Society of Chemistry. This book was released on 2020-04-23 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amphiphilic polymer co-networks (APCNs) are a type of polymeric hydrogel, their hydrophobic polymer segments and hydrophilic components produce less aqueous swelling, giving better mechanical properties than conventional hydrogels. This new class of polymers is attracting increasing attention, resulting in further basic research on the system, as well as new applications. This book focuses on new developments in the field of APCNs, and is organised in four sections: synthesis, properties, applications and modelling. Co-network architectures included in the book chapters are mainly those deriving from hydrophobic macro-cross-linkers, representing the classical approach; however, more modern designs are also presented. Properties of interest discussed include aqueous swelling, thermophysical and mechanical properties, self-assembly, electrical actuation, and protein adsorption. Applications described in the book chapters include the use of co-networks as soft contact lenses, scaffolds for drug delivery and tissue engineering, matrices for heterogeneous biocatalysis, and membranes of controllable permeability. Finally, an important theory chapter on the modelling of the self-assembly of APCNs is also included. The book is suitable for graduate students and researchers interested in hydrogels, polymer networks, polymer chemistry, block copolymers, self-assembly and nanomaterials, as well as their applications in contact lenses, drug delivery, tissue engineering, membranes and biocatalysis.
Download or read book Reactive Extrusion written by Günter Beyer and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive overview of reactive extrusion technology for over a decade combines the views of contributors from both academia and industry who share their experiences and highlight possible applications and markets. They also provide updated information on the underlying chemical and physical concepts, summarizing recent developments in terms of the material and machinery used. As a result, readers will find here a compilation of potential applications for reactive extrusion to access new and cost-effective polymeric materials, while using existing compounding machines.
Download or read book Hydrogen bonded Interpolymer Complexes written by Vitaliy V. Khutoryanskiy and published by World Scientific. This book was released on 2009 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been an increased interest among researchers in hydrogen-bonded interpolymer complexes since the first pioneering papers were published in the early 1960s. Several hundred research papers have been published on various aspects of complex formation reactions in solutions and interfaces, properties of interpolymer complexes and their potential applications. This book focuses on the latest developments in the area of interpolymer complexation via hydrogen bonding. It represents a collection of original and review articles written by recognized experts from Germany, Greece, Kazakhstan, Poland, Romania, Russia, UK, Ukraine, and the USA. It highlights many important applications of interpolymer complexes, including the stabilization of colloidal systems, pharmaceuticals, and nanomaterials.
