Download or read book Thermotropic Liquid Crystal Polymer Blends written by Francesco Paolo La Mantia and published by CRC Press. This book was released on 1993-12-04 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, studies by both industry and academic researchers have opened the door to improving performance and reducing costs of these new materials. The particular structure and morphology of LCPs, as well as their peculiar rheological behavior, have stimulated researchers to develop new theoretical models and new characterization and processing techniques to more fully understand and utilize LCPs. Although the scientific literature is very rich in data on the synthetic techniques and on the relations between structure and phase behavior of these new polymers, the understanding of the rheological and processing aspects is still far from satisfactory-particularly in the case of LCP blends. In fact, although an appreciable number of patents and scientific papers have appeared describing the phase behavior, the rheology, and the mechanical properties of many of these polyblends, several aspects of the relations between processing and morphology, and between morphology and properties of these materials are still obscure or even controversial. Now, this new book, written by leading researchers, provides an up-to-date guide and reference to the processing, rheology and applications of pure LCPs and LCP blends. The book concisely reviews the synthetic procedures for the production of LCPs and discusses the rheological behavior and processing methods. Plus, the book examines present and future applications areas of LCPs and LCP blends.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Blends and Alloys of Engineering Thermoplastics written by H.T.Van De Grampel and published by iSmithers Rapra Publishing. This book was released on 1991-12 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Liquid Crystalline Polymers written by Vijay Kumar Thakur and published by Springer. This book was released on 2015-08-25 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces various applications of liquid crystalline polymers as the emerging new class of high performance novel materials. The authors detail the advantageous properties of these LCs including optical anisotropic, transparency and easy control over structure. This interdisciplinary work includes valuable input from international projects with special focus on the use of liquid crystalline polymers and/or nanocomposites.

Download or read book Thermotropic Liquid Crystal Polymers written by Tai-Shung Chung and published by CRC Press. This book was released on 2001-03-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystal polymers are sometimes called super polymers--with good reason. Their wide range of exceptional properties and ease of processing make them design candidates for many demanding applications. This new book provides a thorough review of LCP technology with the emphasis on the chemistry, synthesis and characterization of the material in its many variants. Additional chapters cover processing and applications. From the Editor's Preface The field of thermotropic liquid crystalline polymers has grown substantially in the last two decades, with fundamental research, publications, commercial products, and patents. In the 1980's, Dr. Ralph Miano led my colleagues and me at Hoechst Celanese in commercializing the first thermotropic liquid crystalline polymers, based on Dr. Gordon Calundann's composition patents. Today, more than seven companies have produced thermotropic liquid crystalline polymer materials, with at least 50 variants available. Hence, it is timely to compile a comprehensive review on the nature of this type of material and the ongoing progress in this field.... The goals of this book are to summarize previous work, provide new insights into this class of polymers, and add to the understanding of the formation of liquid crystallinity. This book covers a wide range of topics and addresses different disciplines in the field. The chapters are arranged as a learning scheme for the professional, from basic science to applied engineering. The first few chapters summarize the syntheses of various polyester, polyester-amid, and polyimide liquid crystalline polymers. The science and origins of liquid crystal formation are revealed. Next, we introduce the characterizations of these materials by their different chemical and physical aspects. Because most commercially available thermotropic liquid crystalline polymers have been used in the form of composites, we have also incorporated a chapter on polymer blends, detailing blending mechanisms and resultant properties. Two chapters on thermosetting liquid crystalline polymers integrate them with other topics, because of their unique importance and their applications for microelectronics and packaging. The final chapter deals with the engineering and processing aspects of thermoplastic liquid crystalline polymers for a variety of applications.

Download or read book Liquid Crystal Polymers written by D. Coates and published by iSmithers Rapra Publishing. This book was released on 2000 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystal polymers (LCPs) have a wide range of uses, from strong engineering plastics to delicate gels for use in liquid crystal (LC) displays. For this reason, it is essential reading for materials scientists, engineers or technologists in industry, as well as research laboratories or academia. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.

Download or read book Ullmann s Polymers and Plastics 4 Volume Set written by Wiley-VCH and published by John Wiley & Sons. This book was released on 2016-04-25 with total page 1934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your personal Ullmann's: Chemical and physical characteristics, production processes and production figures, main applications, toxicology and safety information are all to be found here in one single resource - bringing the vast knowledge of the Ullmann's Encyclopedia to the desks of industrial chemists and chemical engineers. The ULLMANN’S perspective on polymers and plastics brings reliable information on more than 1500 compounds and products straight to your desktop Carefully selected “best of” compilation of 61 topical articles from the Encyclopedia of Industrial Chemistry on economically important polymers provide a wealth of chemical, physical and economic data on more than 1000 different polymers and hundreds of modifications Contains a wealth of information on the production and use of all industrially relevant polymers and plastics, including organic and inorganic polymers, fibers, foams and resins Extensively updated: more than 30% of the content has been added or updated since the launch of the 7th edition of the Ullmann’s encyclopedia in 2011 and is now available in print for the first time 4 Volumes

Download or read book Handbook of Composite Reinforcements written by Stuart M. Lee and published by John Wiley & Sons. This book was released on 1996-12-17 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive single volume handbook covers every aspect of reinforcement science, from hands-on subjects, such as manual 'lay-up' processing, to theoretical discussions concerning rheology and modeling. Taken from the recently published six volume International Encyclopedia of Composites, this reference volume offers scholarly and practical knowledge of distinguished industry-experts, academics, and government researchers in one accessible and informative handbook. Fibers, processes, and composite reinforcement types, as well as relevant miscellaneous subjects such as property relationships, manufacturing, hybrid reinforcements, and modeling are given detailed treatment. Engineers, materials scientists, and technologists will find the Composite Reinforcement Handbook an invaluable tool.

Download or read book Mechanical and Thermophysical Properties of Polymer Liquid Crystals written by Witold Brostow and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: may never overcome the effects of hysteresis and stress (see Chapters 6 and 12). The first sentence of the reference work, Handbook of Liquid Crystals, reads: The terms liquid crystals, crystalline liquid, mesophase, and mesomorphous state are used synonymously to describe a state of aggregation that exhibits a molecular order in a size range similar to that of a crystal but acts more or less as a viscous liquid: [2] In other words, molecules within a liquid crystalline phase possess some orientational order and lack positional order; furthermore, the shape of a liquid crystalline sample is determined by the vessel in which it is contained rather than by the orientational order of its aggregated molecules. The authors recognized the limitations and imprecision of this definition but, like others preceding them, could not devise a simple and generally applicable one that is better. Regardless, the terms 'liquid crystal' and 'mesophase' should not be used interchangeably. As mentioned above, all liquid crystals are mesophases, but all mesophases are not liquid crystals. Recent studies, employing elaborate and sophisticated analytical techniques, have permitted finer distinctions between classical crystals and mesophases. At the same time, they have made definitions like that from the Handbook of Liquid Crystals somewhat obsolete for reasons other than terminology. One part of the problem arises from the use of a combination of bulk properties (like flow) and microscopic properties (like molecular ordering) within the same definition.

Download or read book Polymer Blends and Alloys written by M.J. Folkes and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: P. S. HOPE and M. J. FOLKES Mixing two or more polymers together to produce blends or alloys is a well-established strategy for achieving a specified portfolio of physical proper ties, without the need to synthesise specialised polymer systems. The subject is vast and has been the focus of much work, both theoretical and experimental. Much ofthe earlier work in this field was necessarily empirical and many ofthe blends produced were of academic rather than commercial interest. The manner in which two (or more) polymers are compounded together is of vital importance in controlling the properties of blends. Moreover, particular ly through detailed rheological studies, it is becoming apparent that process ing can provide a wide range of blend microstructures. In an extreme, this is exemplified by the in situ formation of fibres resulting from the imposition of predetermined flow fields on blends, when in the solution or melt state. The microstructures produced in this case transform the blend into a true fibre composite; this parallels earlier work on the deformation of metal alloys. This type of processing-structure-property correlation opens up many new possi bilities for innovative applications; for example, the production of stiff fibre composites and blends having anisotropic transport properties, such as novel membranes. This book serves a dual purpose.

Download or read book Handbook of Engineering and Specialty Thermoplastics Volume 3 written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2011-04-28 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes many of the recent technical research accomplishments in the area of engineering polymers, such as oxygen containing main chain polymers (Polyether and Polyesters). The book emphasizes the various aspects of preparation, structure, processing, morphology, properties and applications of engineering polymers. Recent advances in the development and characterization of multi component polymer blends and composites (maco, micro and nano) based on engineering polymers are discussed in detail. The content of the book is unique as there are no books which deal with the recent advances synthesis, morphology, structure, properties and applications of engineering polymers and their blends and composites including nanocomposites. It covers an up-to-date record on the major findings and observations in the field.

Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.

Download or read book Automotive Plastics and Composites written by Joseph P. Greene and published by William Andrew. This book was released on 2021-06-23 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Plastics and Composites: Materials and Processing is an essential guide to the use of plastic and polymer composites in automotive applications, whether in the exterior, interior, under-the-hood, or powertrain, with a focus on materials, properties, and processing. The book begins by introducing plastics and polymers for the automotive industry, discussing polymer materials and structures, mechanical, chemical, and physical properties, rheology, and flow analysis. In the second part of the book, each chapter is dedicated to a category of material, and considers the manufacture, processing, properties, shrinkage, and possible applications, in each case. Two chapters on polymer processing provide detailed information on both closed-mold and open-mold processing. The final chapters explain other key aspects, such as recycling and sustainability, design principles, tooling, and future trends. This book is an ideal reference for plastics engineers, product designers, technicians, scientists, and R&D professionals who are looking to develop materials, components, or products for automotive applications. The book also intends to guide researchers, scientists, and advanced students in plastics engineering, polymer processing, and materials science and engineering. - Analyzes mechanical, chemical, physical, and thermal properties, enabling the reader to select the appropriate material for specific applications - Explains polymer processing, with thorough coverage of operations across both closed-mold and open-mold processing - Provides systematic coverage of materials, including commodity and engineering thermoplastics, bio-based plastics, thermosets, composites, elastomeric polymers, and 3D-printed plastics

Download or read book Handbook of Thermoplastics written by Olagoke Olabisi and published by CRC Press. This book was released on 2016-02-03 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the bestselling Handbook of Thermoplastics incorporates recent developments and advances in thermoplastics with regard to materials development, processing, properties, and applications. With contributions from 65 internationally recognized authorities in the field, the second edition features new and updated discussions of seve

Download or read book SPE ANTEC 1996 Proceedings Print version 3 volumes written by Spe and published by CRC Press. This book was released on 1996-05-02 with total page 1400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Search of Excellence ANTEC 91 written by Society of Plastic Engineers and published by CRC Press. This book was released on 1991-05-01 with total page 2914 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems written by Sabu Thomas and published by William Andrew. This book was released on 2015-09-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Applications of Nanostructured Polymer Blend and Nanocomposite Systems offers readers an intelligent, thorough introduction to the design and applications of this new generation of designer polymers with customized properties. The book assembles and covers, in a unified way, the state-of-the-art developments of this less explored type of material. With a focus on nanostructured polymer blends, the book discusses the science of nanostructure formation and the potential performance benefits of nanostructured polymer blends and composites for applications across many sectors: electronics, coatings, adhesives, energy (photovoltaics), aerospace, automotive, and medical devices (biocompatible polymers). The book also describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties. - Covers all important information for designing and selecting the right nanostructured polymer system - Provides specialized knowledge on self-repairing, nanofibre and nanostructured multiphase materials, as well as evaluation and testing of nanostructured polymer systems - Serves as a reference guide for development of new products in industries ranging from electronics, coatings, and energy, to transport and medical applications - Describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties