Download or read book Mathematical Modeling of the Blast Furnace Process written by Andrey Dmitriev and published by Cambridge Scholars Publishing. This book was released on 2019-10-23 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the results of extensive research on the mathematical modelling of the blast furnace process. It describes the mathematical models utilised, providing insights into two-dimensional models of gas dynamics, heat transfer and reduction, the cohesion zone, and the balance equilibrium model. On the basis of these models, it details a method for the analytical study of the blast-furnace process, which essentially complements the experimental methods used in practice. Examples of the solution of practical problems of blast furnace smelting are also provided, and the mathematical models highlighted here can be used in research and design institutes, at metallurgical enterprises and for higher education institutions in the training of students in metallurgical specialties.

Download or read book Advanced Pulverized Coal Injection Technology and Blast Furnace Operation written by K. Ishii and published by Elsevier. This book was released on 2000-11-10 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to reduce the cost of running blast furnaces (BFs), injected pulverized coal is used rather than coke to fire BFs. As a result of this, unburned fine materials are blown with the gas into the bosh and dead man areas with possible detrimental effects on gas flow and permeability of the coke column. The capacity of the furnace to consume these particles by solution loss is probably one of the limitations to coal injection. It is, therefore, important to understand the physicochemical and aerodynamic behaviour of fines including the change of in-furnace phenomena.The Committee of Pulverized Coal Combustion and In-Furnace Reaction in BF was set up in 1993 as a cooperative research of the Japan Society for the Promotion of Science (JSPS) and the Iron and Steel Institute (ISIJ) to evaluate research initiative into this problem.This book reports on the JSPS/ISIJ Committee's activities and describes the interpretation of findings drawn from combustion experiments and the results of live furnace applications, and furnace performance.

Download or read book CFD Modeling and Simulation in Materials Processing written by Laurentiu Nastac and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA, March 11-15, 2012

Download or read book Clean Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2019-07-18 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​This book describes the available technologies that can be employed to reduce energy consumption and greenhouse emissions in the steel- and ironmaking industries. Ironmaking and steelmaking are some of the largest emitters of carbon dioxide (over 2Gt per year) and have some of the highest energy demand (25 EJ per year) among all industries; to help mitigate this problem, the book examines how changes can be made in energy efficiency, including energy consumption optimization, online monitoring, and energy audits. Due to negligible regulations and unparalleled growth in these industries during the past 15-20 years, knowledge of best practices and innovative technologies for greenhouse gas remediation is paramount, and something this book addresses. Presents the most recent technological solutions in productivity analyses and dangerous emissions control and reduction in steelmaking plants; Examines the energy saving and emissions abatement efficiency for potential solutions to emission control and reduction in steelmaking plants; Discusses the application of the results of research conducted over the last ten years at universities, research centers, and industrial institutions.

Download or read book International Conference on Advances in the Theory of Ironmaking and Steelmaking ATIS 2009 December 09 11 2009 written by Govind S. Gupta and published by Allied Publishers. This book was released on 2009 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed articles presented in the International Conference on Advances in the Theory of Ironmaking and Steelmaking; organized by the Dept. of Material Engineering, IISc., Bangalore.

Download or read book The Book of the Damned written by Charles Fort and published by Library of Alexandria. This book was released on 2020-09-28 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Time travel, UFOs, mysterious planets, stigmata, rock-throwing poltergeists, huge footprints, bizarre rains of fish and frogs-nearly a century after Charles Fort's Book of the Damned was originally published, the strange phenomenon presented in this book remains largely unexplained by modern science. Through painstaking research and a witty, sarcastic style, Fort captures the imagination while exposing the flaws of popular scientific explanations. Virtually all of his material was compiled and documented from reports published in reputable journals, newspapers and periodicals because he was an avid collector. Charles Fort was somewhat of a recluse who spent most of his spare time researching these strange events and collected these reports from publications sent to him from around the globe. This was the first of a series of books he created on unusual and unexplained events and to this day it remains the most popular. If you agree that truth is often stranger than fiction, then this book is for you"--Taken from Good Reads website.

Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.

Download or read book Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2016-09-02 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes improvements in the iron and steel making process in the past few decades. It also presents new and improved solutions to producing high quality products with low greenhouse emissions. In addition, it examines legislative regulations regarding greenhouse emissions all around the world and how to control these dangerous emissions in iron and steel making plants.

Download or read book Industrial and Process Furnaces written by Barrie Jenkins and published by Butterworth-Heinemann. This book was released on 2013-10-23 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Furnaces sit at the core of all branches of manufacture and industry, so it is vital that these are designed and operated safely and effi-ciently. This reference provides all of the furnace theory needed to ensure that this can be executed successfully on an industrial scale. Industrial and Process Furnaces: Principles, 2nd Edition provides comprehensive coverage of all aspects of furnace operation and design, including topics essential for process engineers and operators to better understand furnaces. This includes: the combustion process and its control, furnace fuels, efficiency, burner design and selection, aerodynamics, heat release profiles, furnace atmosphere, safety and emissions. These elements and more are brought together to illustrate how to achieve optimum design and operation, with real-world case studies to showcase their application. - Up-to-date and comprehensive reference encompassing not only best practice of operation but the essential elements of furnace theory and design, essential to anyone working with furnaces, ovens and combustion-based systems. - More case studies, more worked examples. - New material in this second edition includes further application of Computational Fluid Dynamics (CFD), with additional content on flames and burners, costs, efficiencies and future trends.

Download or read book Ironmaking written by Alexander Babich and published by . This book was released on 2008 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wave Technology in Mechanical Engineering written by R. F. Ganiev and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking volume covers the significant advantages of wave technologies in the development of innovative machine building where high technologies with appreciable economic effect are applied. These technologies cover many industries, including the oil-and-gas industry, refining and other chemical processing, petrochemical industry, production of new materials, composite and nano-composites including, construction equipment, environmental protection, pharmacology, power generation, and many others. The technological problem of grinding, fine-scale grinding and activation of solid particles (dry blends) is disclosed. This task is common for the production of new materials across these various industries. At present in this sphere the traditional methods have reached their limits and in some cases are economically ineffective from both scientific and practical points of view. The authors have detailed, through their extensive groundbreaking research, how these new methods, based on wave technology, can be used to create new, more efficient and less expensive applications and materials for industry. From increasing oil recovery to building stronger machines more efficiently and creating more productive membrane separation devices, wave technology can be used as a fertile ground for product innovation and more efficient methods of production across a variety of industries. This book is the only one of its kind in the world and offers a unique and invaluable glance into this sophisticated and complicated scientific area that is only now being more fully utilized for its valuable benefits.

Download or read book Modern Blast Furnace Ironmaking written by M. Geerdes and published by IOS Press. This book was released on 2015-04-07 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the blast furnace process for operators. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background is clarified. Operational observations, challenges and remedies are explained from this perspective. Optimization of the blast furnace process is not only based on “best practice transfer”, but also requires conceptual understanding of what works when. In other words: operational improvement is not only based on know–how, but on know–why as well. With Modern Blast Furnace Ironmaking – An Introduction (Third Edition, 2015) the reader has a compact compendium of the blast furnace process available: by operators and for operators and for those who are preparing to become operators.

Download or read book Democratizing Innovation written by Eric Von Hippel and published by MIT Press. This book was released on 2006-02-17 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of user-centered innovation: how it can benefit both users and manufacturers and how its emergence will bring changes in business models and in public policy. Innovation is rapidly becoming democratized. Users, aided by improvements in computer and communications technology, increasingly can develop their own new products and services. These innovating users—both individuals and firms—often freely share their innovations with others, creating user-innovation communities and a rich intellectual commons. In Democratizing Innovation, Eric von Hippel looks closely at this emerging system of user-centered innovation. He explains why and when users find it profitable to develop new products and services for themselves, and why it often pays users to reveal their innovations freely for the use of all.The trend toward democratized innovation can be seen in software and information products—most notably in the free and open-source software movement—but also in physical products. Von Hippel's many examples of user innovation in action range from surgical equipment to surfboards to software security features. He shows that product and service development is concentrated among "lead users," who are ahead on marketplace trends and whose innovations are often commercially attractive. Von Hippel argues that manufacturers should redesign their innovation processes and that they should systematically seek out innovations developed by users. He points to businesses—the custom semiconductor industry is one example—that have learned to assist user-innovators by providing them with toolkits for developing new products. User innovation has a positive impact on social welfare, and von Hippel proposes that government policies, including R&D subsidies and tax credits, should be realigned to eliminate biases against it. The goal of a democratized user-centered innovation system, says von Hippel, is well worth striving for. An electronic version of this book is available under a Creative Commons license.

Download or read book Introduction to Glass Science and Technology written by James E Shelby and published by Royal Society of Chemistry. This book was released on 2015-11-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise and inexpensive introduction for an undergraduate course in glass science and technology. The level of the book has deliberately been maintained at the introductory level to avoid confusion of the student by inclusion of more advanced material, and is unique in that its text is limited to the amount suitable for a one term course for students in materials science, ceramics or inorganic chemistry. The contents cover the fundamental topics of importance in glass science and technology, including glass formation, crystallization, phase separation and structure of glasses. Additional chapters discuss the most important properties of glasses, including discussion of physical, optical, electrical, chemical and mechanical properties. A final chapter provides an introduction to a number of methods used to form technical glasses, including glass sheet, bottles, insulation fibre, optical fibres and other common commercial products. In addition, the book contains discussion of the effects of phase separation and crystallization on the properties of glasses, which is neglected in other texts. Although intended primarily as a textbook, Introduction to Glass Science and Technology will also be invaluable to the engineer or scientist who desires more knowledge regarding the formation, properties and production of glass.

Download or read book Fundamentals of Combustion Processes written by Sara McAllister and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Combustion Processes is designed as a textbook for an upper-division undergraduate and graduate level combustion course in mechanical engineering. The authors focus on the fundamental theory of combustion and provide a simplified discussion of basic combustion parameters and processes such as thermodynamics, chemical kinetics, ignition, diffusion and pre-mixed flames. The text includes exploration of applications, example exercises, suggested homework problems and videos of laboratory demonstrations

Download or read book Modern Blast Furnace Ironmaking written by M. Geerdes and published by IOS Press. This book was released on 2020-11-04 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Blast Furnace Ironmaking – An Introduction (Fourth Edition, 2020) describes the principles of the blast furnace process. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background of the blast furnace process is clarified. The book focuses on the control of the process with respect to thermal control, gas flow control and casthouse operation. In this book, all essential process details are described and a special focus is on cost optimization by low coke rates and on management of the process in case of disturbances and upsets. The optimization of the blast furnace is not only based on “best practice transfer”, but also requires conceptual understanding why a measure works in some cases and not in other cases. In other words, operational improvement is not only based on know–how, but as well on know–why. This publication can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management.

Download or read book Evolutionary Computation written by Ashish M. Gujarathi and published by CRC Press. This book was released on 2016-12-01 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by professionals with years of experience, this book provides an introduction to the theory of evolutionary algorithms and single- and multi-objective optimization, and then goes on to discuss to explore applications of evolutionary algorithms for many uses with real-world applications. Covering both the theory and applications of evolutionary computation, the book offers exhaustive coverage of several topics on nontraditional evolutionary techniques, details working principles of new and popular evolutionary algorithms, and discusses case studies on both scientific and real-world applications of optimization