Download or read book Blade to the Heat written by Oliver Mayer and published by Dramatists Play Service, Inc.. This book was released on 1996 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE STORY: Boxer Pedro Quinn, an introverted loner, wins a surprise split-decision against the reigning middleweight champion, Mantequilla Decima. Used to winning, Mantequilla grows embittered by the loss of his title. Worse, he starts hearing one
Download or read book Knife Engineering written by Larrin Thomas and published by . This book was released on 2020-07-16 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth exploration of the effects of different steels, heat treatments, and edge geometries on knife performance. This book provides ratings for toughness, edge retention, and corrosion resistance for all of the popular knife steels. Micrographs of over 50 steels. Specific recommended heat treatments for each steel. And answers to questions like: 1) Does a thinner or thicker edge last longer? 2) What heat treatment leads to the best performance? 3) Are there performance benefits to forging blades? 4) Should I use stainless or carbon steel? All of these questions and more are answered by a metallurgist who grew up around the knife industry.
Download or read book Determination of Gas to blade Convection Heat transfer Coefficients on a Forced convection Water cooled Single stage Aluminum Turbine written by John C. Freche and published by . This book was released on 1951 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Procedure for Calculating Turbine Blade Temperatures and Comparison of Calculated with Observed Values for Two Stationary Air cooled Blades written by W. Byron Brown and published by . This book was released on 1952 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Local and average blade temperatures were calculated for two stationary air-cooled turbine blades with 10 tubes and 13 fins forming the internal heat-transfer surfaces. These temperatures were calculated using previously published NACA temperature-distribution equations and the most recent theories for determining heat-transfer coefficients, including for the first time the allowance for effects of variable wall temperature on gas-to-blade heat-transfer coefficients at the leading and trailing sections of turbine blades. Comparison of calculated and experimental blade temperatures, for gas temperatures of 300° and 1000°F, resulted in good agreement.
Download or read book Blade to coolant Heat transfer Results and Operating Data from a Natural convection Water cooled Single stage Turbine written by Anthony J. Diaguila and published by . This book was released on 1951 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Blade tip Crossover Passages on Natural convection Water cooling of Gas turbine Blades written by Charles F. Zalabak and published by . This book was released on 1956 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A water-cooled turbine was fabricated and tested to determine the effect of a connecting passage at the turbine rotor blade tip between a radial coolant passage 0.10 inch in diameter (length-diameter ratio = 25.5) and radial coolant passages in the legnth-diameter range of 5.1 to 20.4. Coolant flow through the connecting passage is induced by free-convection forces in the radial passages.
Download or read book Blade s Guide to Making Knives written by Joe Kertzman and published by F+W Media, Inc.. This book was released on 2005-06-18 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blade Building Made Easy The world's finest knifemakers learned to ply their trade through trial and error. They honed their skills with blood, sweat and tears. Never before has there been a fully illustrated, all-color, step-by-step book on how to make knives - until now! And, as a bonus, two chapters are dedicated to sword and tomahawk making. Novice knifemakers, knife enthusiasts and shop junkies of the world, this is the book of your dreams! Learn to grind blades Fashion handles the easy way Forge steel like the pros Fashion bolsters and guards Fit and finish those bladed beauties Chapters are penned by some of the world's greatest knifemakers, including Wane Goddard, Allen Elishewitz, Rick Dunkerley, Don Fogg, R.J. Martin, Jow Szilaski and John Lewis Jensen. Seeing is believing, and with over 400 step-by-step illustrations guiding you along the way to making your first or finest knife, this book is a must-have for any knife enthusiast's library. Have fun, and be careful!
Download or read book Gas Turbine Blade Cooling written by Chaitanya D Ghodke and published by SAE International. This book was released on 2018-12-10 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbines play an extremely important role in fulfilling a variety of power needs and are mainly used for power generation and propulsion applications. The performance and efficiency of gas turbine engines are to a large extent dependent on turbine rotor inlet temperatures: typically, the hotter the better. In gas turbines, the combustion temperature and the fuel efficiency are limited by the heat transfer properties of the turbine blades. However, in pushing the limits of hot gas temperatures while preventing the melting of blade components in high-pressure turbines, the use of effective cooling technologies is critical. Increasing the turbine inlet temperature also increases heat transferred to the turbine blade, and it is possible that the operating temperature could reach far above permissible metal temperature. In such cases, insufficient cooling of turbine blades results in excessive thermal stress on the blades causing premature blade failure. This may bring hazards to the engine's safe operation. Gas Turbine Blade Cooling, edited by Dr. Chaitanya D. Ghodke, offers 10 handpicked SAE International's technical papers, which identify key aspects of turbine blade cooling and help readers understand how this process can improve the performance of turbine hardware.
Download or read book The Development of a Hollow Blade for Exhaust Gas Turbines written by H. Kohlmann and published by . This book was released on 1950 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of the development of German hollow turbine blades for use with internal cooling is discussed in detail. The development of a suitable blade profile from cascade theory is described. Also a discussion of the temperature distribution and stresses in a turbine blade is presented. Various methods of manufacturing hollow blades and the methods by which they are mounted in the turbine rotor are presented in detail.
Download or read book Blade to the Heat by Oliver Mayer 1996 Script written by Canadian Stage Theatre Archives (University of Guelph) and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blade Servers and Virtualization written by Barb Goldworm and published by John Wiley & Sons. This book was released on 2007-05-21 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blade server systems and virtualization are key building blocks for Next Generation Enterprise Data centers Blades offer modular, pre-wired, ultra high-density servers (up to 10x traditional servers) with shared components (power, cooling, switches) – reducing complexity and cost, and improving flexibility, availability, manageability, and maintainability Virtualization enables consolidation of physical servers by allowing many virtual servers to run concurrently on one physical server – improving system utilization, reducing the total number of physical servers, reducing costs, and increasing flexibility This is the first book covering these complementary technologies and how, together, they provide a strong foundation for the future It examines the history, architectures, features, examples, and user case studies of blade systems and virtualization, and offers guidance and considerations for how to evaluate and implement solutions
Download or read book Steady state Stress Relaxation Analysis of Turbine Blade Cooling Designs written by Albert Kaufman and published by . This book was released on 1969 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Materials for Power Engineering 1990 written by E. Bachelet and published by Springer Science & Business Media. This book was released on 1990 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Themes reflect the work carried out within the framework of COST-501 and of COST-505 the latter being concerned with materials for steam turbines and the first results of the concerted action COST-501/II 'High temperature materials for power engineering' initiated in 1988.
Download or read book Steel Metallurgy for the Non Metallurgist written by John D. Verhoeven and published by ASM International. This book was released on 2007-01-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the metallurgy of steel and its heat treatment for non-metallurgists. It starts from simple concepts--beginning at the level of high-school chemistry classes--and building to more complex concepts involved in heat treatment of most all types of steel as well as cast iron. It was inspired by the author when working with practicing bladesmiths for more than 15 years. Most chapters in the book contain a summary at the end. These summaries provide a short review of the contents of each chapter. This book is THE practical primer on steel metallurgy for those who heat, forge, or machine steel.
Download or read book Fabrication and Endurance of Air cooled Strut supported Turbine Blades with Struts Cast of X 40 Alloy written by Eugene F. Schum and published by . This book was released on 1956 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Heat Transfer written by Theodore L. Bergman and published by John Wiley & Sons. This book was released on 2011-06-13 with total page 2069 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely updated, the sixth edition provides engineers with an in-depth look at the key concepts in the field. It incorporates new discussions on emerging areas of heat transfer, discussing technologies that are related to nanotechnology, biomedical engineering and alternative energy. The example problems are also updated to better show how to apply the material. And as engineers follow the rigorous and systematic problem-solving methodology, they'll gain an appreciation for the richness and beauty of the discipline.
Download or read book Advanced Computational Methods and Experiments in Heat Transfer X written by Bengt Sundén and published by WIT Press. This book was released on 2008-06-19 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: In engineering design and development, reliable and accurate computational methods are requested to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements have been achieved during recent years due to improved numerical solutions of non-linear partial differential equations and computer developments to achieve efficient and rapid calculations. Nevertheless, to further progress in computational methods will require developments in theoretical and predictive procedures – both basic and innovative – and in applied research. Accurate experimental investigations are needed to validate the numerical calculations. This book contains the edited versions of the papers presented at the Tenth International Conference on Advanced Computational Methods and Experimental Measurements in Heat Transfer and Mass Transfer held in Maribor, Slovenia in July 2008. The objective of this conference series is to provide a forum for presentation and discussion of advanced topics, new approaches and application of advanced computational methods and experimental measurements to heat and mass transfer problems. The contributed papers are grouped in the following appropriate sections to provide better access for readers: Natural and forced convection; Heat exchangers; Advances in computational methods; Heat recovery; Heat transfer; Modelling and experiments.
