Download or read book General Momentum Theory for Horizontal Axis Wind Turbines written by Jens Nørkær Sørensen and published by Springer. This book was released on 2015-08-17 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reconsiders the basic approaches behind the BEM method and in particular assesses and validates the equations forming the general momentum theory. One part of the book concerns the validation, using numerical fluid mechanics (CFD), of the different terms in the equations forming the momentum theory. Other parts present new ideas for extending the theory and for enhancing the accuracy of the BEM approach. Besides a general introduction and explanation of the momentum theory, the book also deals with specialized topics, such as diffusor-augmented rotors, wind tunnel corrections, tip corrections, and combined momentum/vortex theory for design of wind turbine rotors. The book contains new as well as already published material, and the author has strived to put the material into a new and more consistent context than what usually is found in similar text books. The book is primarily intended for researchers and experienced students with a basic knowledge in fluid mechanics wishing to understand and expand their knowledge on wind turbine aerodynamics. The book is self-consistent, hence all necessary derivations are shown, and it should not be necessary to seek help in other literature to understand the contents of the book.

Download or read book Aerodynamics of Wind Turbines 2nd edition written by Martin O. L. Hansen and published by Routledge. This book was released on 2013-05-13 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerodynamics of Wind Turbines is the established essential text for the fundamental solutions to efficient wind turbine design. Now in its second edition, it has been entirely updated and substantially extended to reflect advances in technology, research into rotor aerodynamics and the structural response of the wind turbine structure. Topics covered include increasing mass flow through the turbine, performance at low and high wind speeds, assessment of the extreme conditions under which the turbine will perform and the theory for calculating the lifetime of the turbine. The classical Blade Element Momentum method is also covered, as are eigenmodes and the dynamic behaviour of a turbine. The new material includes a description of the effects of the dynamics and how this can be modelled in an ?aeroelastic code?, which is widely used in the design and verification of modern wind turbines. Further, the description of how to calculate the vibration of the whole construction, as well as the time varying loads, has been substantially updated.

Download or read book Renewable Energy and Sustainable Buildings written by Ali Sayigh and published by Springer Nature. This book was released on 2019-08-30 with total page 969 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers presented during the World Renewable Energy Network’s 28thanniversary congress at the University of Kingston in London. The forum highlighted the integration of renewables and sustainable buildings as the best means to combat climate change. In-depth chapters written by the world’s leading experts highlight the most current research and technological breakthroughs and discuss policy, renewable energy technologies and applications in all sectors – for heating and cooling, agricultural applications, water, desalination, industrial applications and for the transport sectors. Presents cutting-edge research in green building and renewable energy from all over the world; Covers the most up-to-date research developments, government policies, business models, best practices and innovations; Contains case studies and examples to enhance practical application of the technologies.

Download or read book Aerodynamics of Wind Turbines written by Sven Schmitz and published by John Wiley & Sons. This book was released on 2020-01-28 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of the aerodynamics, design and analysis, and optimization of wind turbines, combined with the author’s unique software Aerodynamics of Wind Turbines is a comprehensive introduction to the aerodynamics, scaled design and analysis, and optimization of horizontal-axis wind turbines. The author –a noted expert on the topic – reviews the fundamentals and basic physics of wind turbines operating in the atmospheric boundary layer. He then explores more complex models that help in the aerodynamic analysis and design of turbine models. The text contains unique chapters on blade element momentum theory, airfoil aerodynamics, rotational augmentation, vortex-wake methods, actuator-line modeling, and designing aerodynamically scaled turbines for model-scale experiments. The author clearly demonstrates how effective analysis and design principles can be used in a wide variety of applications and operating conditions. The book integrates the easy-to-use, hands-on XTurb design and analysis software that is available on a companion website for facilitating individual analyses and future studies. This component enhances the learning experience and helps with a deeper and more complete understanding of the subject matter. This important book: Covers aerodynamics, design and analysis and optimization of wind turbines Offers the author’s XTurb design and analysis software that is available on a companion website for individual analyses and future studies Includes unique chapters on blade element momentum theory, airfoil aerodynamics, rotational augmentation, vortex-wake methods, actuator-line modeling, and designing aerodynamically scaled turbines for model-scale experiments Demonstrates how design principles can be applied to a variety of applications and operating conditions Written for senior undergraduate and graduate students in wind energy as well as practicing engineers and scientists, Aerodynamics of Wind Turbines is an authoritative text that offers a guide to the fundamental principles, design and analysis of wind turbines.

Download or read book Wind Turbine Aerodynamics and Vorticity Based Methods written by Emmanuel Branlard and published by Springer. This book was released on 2017-04-05 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the fundamentals of fluid-mechanics, momentum theories, vortex theories and vortex methods necessary for the study of rotors aerodynamics and wind-turbines aerodynamics in particular. Rotor theories are presented in a great level of details at the beginning of the book. These theories include: the blade element theory, the Kutta-Joukowski theory, the momentum theory and the blade element momentum method. A part of the book is dedicated to the description and implementation of vortex methods. The remaining of the book focuses on the study of wind turbine aerodynamics using vortex-theory analyses or vortex-methods. Examples of vortex-theory applications are: optimal rotor design, tip-loss corrections, yaw-models and dynamic inflow models. Historical derivations and recent extensions of the models are presented. The cylindrical vortex model is another example of a simple analytical vortex model presented in this book. This model leads to the development of different BEM models and it is also used to provide the analytical velocity field upstream of a turbine or a wind farm under aligned or yawed conditions. Different applications of numerical vortex methods are presented. Numerical methods are used for instance to investigate the influence of a wind turbine on the incoming turbulence. Sheared inflows and aero-elastic simulations are investigated using vortex methods for the first time. Many analytical flows are derived in details: vortex rings, vortex cylinders, Hill's vortex, vortex blobs etc. They are used throughout the book to devise simple rotor models or to validate the implementation of numerical methods. Several Matlab programs are provided to ease some of the most complex implementations.

Download or read book Fundamental and Advanced Topics in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2011-07-05 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the fastest growing source of energy in the world, wind has a very important role to play in the global energy mix. This text covers a spectrum of leading edge topics critical to the rapidly evolving wind power industry. The reader is introduced to the fundamentals of wind energy aerodynamics; then essential structural, mechanical, and electrical subjects are discussed. The book is composed of three sections that include the Aerodynamics and Environmental Loading of Wind Turbines, Structural and Electromechanical Elements of Wind Power Conversion, and Wind Turbine Control and System Integration. In addition to the fundamental rudiments illustrated, the reader will be exposed to specialized applied and advanced topics including magnetic suspension bearing systems, structural health monitoring, and the optimized integration of wind power into micro and smart grids.

Download or read book Advances in Wind Turbine Blade Design and Materials written by Povl Brondsted and published by Elsevier. This book was released on 2013-10-31 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy is gaining critical ground in the area of renewable energy, with wind energy being predicted to provide up to 8% of the world's consumption of electricity by 2021. Advances in wind turbine blade design and materials reviews the design and functionality of wind turbine rotor blades as well as the requirements and challenges for composite materials used in both current and future designs of wind turbine blades.Part one outlines the challenges and developments in wind turbine blade design, including aerodynamic and aeroelastic design features, fatigue loads on wind turbine blades, and characteristics of wind turbine blade airfoils. Part two discusses the fatigue behavior of composite wind turbine blades, including the micromechanical modelling and fatigue life prediction of wind turbine blade composite materials, and the effects of resin and reinforcement variations on the fatigue resistance of wind turbine blades. The final part of the book describes advances in wind turbine blade materials, development and testing, including biobased composites, surface protection and coatings, structural performance testing and the design, manufacture and testing of small wind turbine blades.Advances in wind turbine blade design and materials offers a comprehensive review of the recent advances and challenges encountered in wind turbine blade materials and design, and will provide an invaluable reference for researchers and innovators in the field of wind energy production, including materials scientists and engineers, wind turbine blade manufacturers and maintenance technicians, scientists, researchers and academics. - Reviews the design and functionality of wind turbine rotor blades - Examines the requirements and challenges for composite materials used in both current and future designs of wind turbine blades - Provides an invaluable reference for researchers and innovators in the field of wind energy production

Download or read book Theory of Wing Sections written by Ira H. Abbott and published by Courier Corporation. This book was released on 2012-04-26 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise compilation of subsonic aerodynamic characteristics of NACA wing sections, plus description of theory. 350 pages of tables.

Download or read book Wind Turbines and Aerodynamics Energy Harvesters written by Dan Zhao and published by Academic Press. This book was released on 2019-08-02 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Turbines and Aerodynamics Energy Harvesters not only presents the most research-focused resource on aerodynamic energy harvesters, but also provides a detailed review on aeroacoustics characteristics. The book considers all developing aspects of 3D printed miniature and large-size Savonious wind harvesters, while also introducing and discussing bladeless and aeroelastic harvesters. Following with a review of Off-shore wind turbine aerodynamics modeling and measurements, the book continues the discussion by comparing the numerical codes for floating offshore wind turbines. Each chapter contains a detailed analysis and numerical and experimental case studies that consider recent research design, developments, and their application in practice. Written by an experienced, international team in this cross-disciplinary field, the book is an invaluable reference for wind power engineers, technicians and manufacturers, as well as researchers examining one of the most promising and efficient sources of renewable energy. - Offers numerical models and case studies by experienced authors in this field - Contains an overview and analysis of the latest research - Explores 3D printing technology and the production of wind harvesters for real applications - Includes, and uses, ANSYS FLUENT case files

Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)

Download or read book Wind Energy Handbook written by Tony Burton and published by John Wiley & Sons. This book was released on 2001-12-12 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: As environmental concerns have focused attention on the generation of electricity from clean and renewable sources wind energy has become the world's fastest growing energy source. The Wind Energy Handbook draws on the authors' collective industrial and academic experience to highlight the interdisciplinary nature of wind energy research and provide a comprehensive treatment of wind energy for electricity generation. Features include: An authoritative overview of wind turbine technology and wind farm design and development In-depth examination of the aerodynamics and performance of land-based horizontal axis wind turbines A survey of alternative machine architectures and an introduction to the design of the key components Description of the wind resource in terms of wind speed frequency distribution and the structure of turbulence Coverage of site wind speed prediction techniques Discussions of wind farm siting constraints and the assessment of environmental impact The integration of wind farms into the electrical power system, including power quality and system stability Functions of wind turbine controllers and design and analysis techniques With coverage ranging from practical concerns about component design to the economic importance of sustainable power sources, the Wind Energy Handbook will be an asset to engineers, turbine designers, wind energy consultants and graduate engineering students.

Download or read book Wind Energy Explained written by J. F. Manwell and published by Wiley-Blackwell. This book was released on 2002-06-21 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended to provide an introduction to the cross-disciplinary field of wind engineering. It includes end-of-chapter tutorial sections (solutions manual available) and combines both academic and industrial experience.

Download or read book Wind Energy Design written by Thomas Corke and published by CRC Press. This book was released on 2018-04-27 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Energy Systems is designed for undergraduate engineering courses, with a focus on multidisciplinary design of a wind energy system. The text covers basic wind power concepts and components - wind characteristics and modeling, rotor aerodynamics, lightweight flexible structures, wind farms, aerodynamics, wind turbine control, acoustics, energy storage, and economics. These topics are applied to produce a new conceptual wind energy design, showing the interplay of various design aspects in a complete system. An ongoing case study demonstrates the integration of various component topics, and MATLAB examples are included to show computerized design analysis procedures and techniques.

Download or read book Wind Energy written by Mathew Sathyajith and published by Springer Science & Business Media. This book was released on 2006-03-14 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Growing energy demand and environmental consciousness have re-evoked human interest in wind energy. As a result, wind is the fastest growing energy source in the world today. Policy frame works and action plans have already been for- lated at various corners for meeting at least 20 per cent of the global energy - mand with new-renewables by 2010, among which wind is going to be the major player. In view of the rapid growth of wind industry, Universities, all around the world, have given due emphasis to wind energy technology in their undergraduate and graduate curriculum. These academic programmes attract students from diver- fied backgrounds, ranging from social science to engineering and technology. Fundamentals of wind energy conversion, which is discussed in the preliminary chapters of this book, have these students as the target group. Advanced resource analysis tools derived and applied are beneficial to academics and researchers working in this area. The Wind Energy Resource Analysis (WERA) software, provided with the book, is an effective tool for wind energy practitioners for - sessing the energy potential and simulating turbine performance at prospective sites.

Download or read book Wind Turbines written by Abdel Ghani Aissaoui and published by BoD – Books on Demand. This book was released on 2016-07-27 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable energies constitute excellent solutions to both the increase of energy consumption and environment problems. Among these energies, wind energy is very interesting. Wind energy is the subject of advanced research. In the development of wind turbine, the design of its different structures is very important. It will ensure: the robustness of the system, the energy efficiency, the optimal cost and the high reliability. The use of advanced control technology and new technology products allows bringing the wind energy conversion system in its optimal operating mode. Different strategies of control can be applied on generators, systems relating to blades, etc. in order to extract maximal power from the wind. The goal of this book is to present recent works on design, control and applications in wind energy conversion systems.

Download or read book Handbook of Wind Energy Aerodynamics written by Bernhard Stoevesandt and published by Springer Nature. This book was released on 2022-08-04 with total page 1495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides both a comprehensive overview and deep insights on the state-of-the-art methods used in wind turbine aerodynamics, as well as their advantages and limits. The focus of this work is specifically on wind turbines, where the aerodynamics are different from that of other fields due to the turbulent wind fields they face and the resultant differences in structural requirements. It gives a complete picture of research in the field, taking into account the different approaches which are applied. This book would be useful to professionals, academics, researchers and students working in the field.

Download or read book The Fluid Dynamic Basis for Actuator Disc and Rotor Theories written by G.A.M. van Kuik and published by IOS Press. This book was released on 2022-06-09 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first rotor performance predictions were published by Joukowsky exactly 100 years ago. Although a century of research has expanded the knowledge of rotor aerodynamics enormously, and modern computer power and measurement techniques now enable detailed analyses that were previously out of reach, the concepts proposed by Froude, Betz, Joukowsky and Glauert for modelling a rotor in performance calculations are still in use today, albeit with modifications and expansions. This book is the result of the author's curiosity as to whether a return to these models with a combination of mathematics, dedicated computations and wind tunnel experiments could yield more physical insight and answer some of the old questions still waiting to be resolved. Although most of the work included here has been published previously, the book connects the various topics, linking them in a coherent storyline. “The Fluid Dynamic Basis for Actuator Disc and Rotor Theories” was first published in 2018. This Revised Second Edition (2022) will be of interest to those working in all branches of rotor aerodynamics – wind turbines, propellers, ship screws and helicopter rotors. It has been written for proficient students and researchers, and reading it will demand a good knowledge of inviscid (fluid) mechanics. Jens Nørkær Sørensen, DTU, Technical University of Denmark: “(...) a great piece of work, which in a consistent way highlights many of the items that the author has worked on through the years. All in all, an impressive contribution to the classical work on propellers/wind turbines.” Peter Schaffarczyk, Kiel University of Applied Sciences, Germany: “(...) a really impressive piece of work!” Carlos Simão Ferreira, Technical University Delft: “This is a timely book for a new generation of rotor aerodynamicists from wind turbines to drones and personal air-vehicles. In a time where fast numerical solutions for aerodynamic design are increasingly available, a clear theoretical and fundamental formulation of the rotor-wake problem will help professionals to evaluate the validity of their design problem. ‘The Fluid Dynamic Basis for Actuator Disc and Rotor Theories’ is a pleasure to read, while the structure, text and figures are just as elegant as the theory presented.” The cover shows ‘The Red Mill’, by Piet Mondriaan, 1911, collection Gemeentemuseum Den Haag. Cover image: © 2022 Mondrian/Holtzman Trust.