Download or read book Black Powder Manufacturing Methods and Techniques written by Ian von Maltitz and published by . This book was released on 1997-12-01 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bombs IEDs and Explosives written by Paul R. Laska and published by CRC Press. This book was released on 2015-08-10 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide on procedures, administration, and equipment, Bombs, IEDs, and Explosives: Identification, Investigation, and Disposal Techniques introduces concepts, basic knowledge, and necessary skill sets for bomb technicians. It covers topics such as training resources, bomb threat and incident response, legal aspects of bomb disposal, explosives and
Download or read book Black and Smokeless Powders written by National Research Council and published by National Academies Press. This book was released on 1999-01-29 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some 600 pipe bomb explosions have occurred annually in the United States during the past several years. How can technology help protect the public from these homemade devices? This book, a response to a Congressional mandate, focuses on ways to improve public safety by preventing bombings involving smokeless or black powders and apprehending the makers of the explosive devices. It examines technologies used for detection of explosive devices before they explodeâ€"including the possible addition of marking agents to the powdersâ€"and technologies used in criminal investigations for identification of these powdersâ€"including the possible addition of taggants to the powdersâ€"in the context of current technical capabilities. The book offers general conclusions and recommendations about the detection of devices containing smokeless and black powders and the feasibility of identifying makers of the devices from recovered powder or residue. It also makes specific recommendations about marking and tagging technologies. This volume follows the work reported in Containing the Threat from Illegal Bombings (NRC 1998), which studied similar issues for bombings that utilize high explosives.
Download or read book Government wide Index to Federal Research Development Reports written by and published by . This book was released on 1967 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Omnibus Antiterrorism Act of 1979 written by United States. Congress. Senate. Committee on Governmental Affairs and published by . This book was released on 1979 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book DeGarmo s Materials and Processes in Manufacturing written by J. T. Black and published by John Wiley & Sons. This book was released on 2011-08-30 with total page 1298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its eleventh edition, DeGarmo's Materials and Processes in Manufacturing has been a market-leading text on manufacturing and manufacturing processes courses for more than fifty years. Authors J T. Black and Ron Kohser have continued this book's long and distinguished tradition of exceedingly clear presentation and highly practical approach to materials and processes, presenting mathematical models and analytical equations only when they enhance the basic understanding of the material. Completely revised and updated to reflect all current practices, standards, and materials, the eleventh edition has new coverage of additive manufacturing, lean engineering, and processes related to ceramics, polymers, and plastics.
Download or read book Department of Defense Appropriations for Fiscal Year 1971 written by United States. Congress. Senate. Committee on Appropriations. Subcommittee on Department of Defense and published by . This book was released on 1970 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of the Army written by United States. Congress. Senate. Committee on Appropriations. Subcommittee on Department of Defense and published by . This book was released on 1970 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of Defense Appropriations for Fiscal Year 1971 Dept of Defense defense agencies public witnesses written by United States. Congress. Senate. Appropriations Committee and published by . This book was released on 1970 with total page 1178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.
Download or read book Department of Defense Appropriations for written by United States. Congress. House. Committee on Appropriations and published by . This book was released on 1980 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of Defense Appropriations for 1981 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of Defense and published by . This book was released on 1980 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of Defense Appropriations for 1981 Tactical aircraft written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of Defense and published by . This book was released on 1980 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2018-11-30 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Non-Ferrous Metal Powders: Technologies and Applications, Second Edition, provides information on the manufacture and use of powders of non-ferrous metals that has taken place for many years in the area previously known as Soviet Russia. It presents the huge amount of knowledge and experience that has built up over the last fifty years. Originally published in Russia by several prominent scientists, researchers and engineers, this presents an update to the first book that includes sections on classification, properties, treatment methods and production. This updated edition contains new content on the powders, along with newer methods of 3D printing. Covers the manufacturing methods, properties and importance of the following metals: aluminum, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth Includes new content on recent advances, such as additive manufacturing and 3D printing of non-ferrous metal alloys and specific powders for advanced techniques, including metal injection molding technologies Expands on topics such as safety engineering in the production of powders and advanced areas of engineering research, such as nanopowder processes
Download or read book The Study of Change written by James Reardon-Anderson and published by Cambridge University Press. This book was released on 1991 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: When Western missionaries introduced modern chemistry to China in the 1860s, they called this discipline hua-hsueh, literally, 'the study of change'. In this first full-length work on science in modern China, James Reardon-Anderson describes the introduction and development of chemistry in China in the late nineteenth and early twentieth centuries, and examines the impact of the science on language reform, education, industry, research, culture, society, and politics. Throughout the book, Professor Reardon-Anderson sets the advance of chemistry in the broader context of the development of science in China and the social and political changes of this era. His thesis is that science fared well at times when a balance was struck between political authority and free social development. Based on Chinese and English sources, the narrative moves from detailed descriptions of particular chemical processes and innovations to more general discussions of intellectual and social history, and provides a fascinating account of an important episode in the intellectual history of modern China.
Download or read book Advances of Science and Technology written by Mulatu Liyew Berihun and published by Springer Nature. This book was released on 2022-01-01 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set of LNICST 411 and 412 constitutes the refereed post-conference proceedings of the 9th International Conference on Advancement of Science and Technology, ICAST 2021, which took place in August 2021. Due to COVID-19 pandemic the conference was held virtually. The 80 revised full papers were carefully reviewed and selected from 202 submissions. The papers present economic and technologic developments in modern societies in 7 tracks: Chemical, Food and Bioprocess Engineering; Electrical and Electronics Engineering; ICT, Software and Hardware Engineering; Civil, Water Resources, and Environmental Engineering ICT; Mechanical and Industrial Engineering; Material Science and Engineering; Energy Science, Engineering and Policy.
