Download or read book Bioprocess designing towards clean energy production from industrial wastewater written by Mohd Nasrullah and published by Frontiers Media SA. This book was released on 2024-03-04 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prospects of Renewable Bioprocessing in Future Energy Systems written by Ali Asghar Rastegari and published by Springer. This book was released on 2019-04-03 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses various renewable energy resources and technologies. Topics covered include recent advances in photobioreactor design; microalgal biomass harvesting, drying, and processing; and technological advances and optimised production systems as prerequisites for achieving a positive energy balance. It highlights alternative resources that can be used to replace fossil fuels, such as algal biofuels, biodiesel, bioethanol, and biohydrogen. Further, it reviews microbial technologies, discusses an immobilization method, and highlights the efficiency of enzymes as a key factor in biofuel production. In closing, the book outlines future research directions to increase oil yields in microalgae, which could create new opportunities for lipid-based biofuels, and provides an outlook on the future of global biofuel production. Given its scope, the book will appeal to all researchers and engineers working in the renewable energy sector.
Download or read book Sustainable Bioprocessing for a Clean and Green Environment written by M. Jerold and published by CRC Press. This book was released on 2021-09-17 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Bioprocessing for a Clean and Green Environment: Concepts and Applications highlights the importance of waste to health in which waste is safely converted to value-added products via bioprocess technologies. Providing fundamental concepts and applications, this book also offers readers the methodology behind the operation of a variety of biological processes used in developing valuable products from waste. Features: Discusses synthesis and use of environmentally friendly biobased materials, such as biopolymer films and biobased plasticizers Highlights nanotechnology applications in the treatment of pollution and emphasizes the synthesis of biogenic nanomaterials for environmental remediation Describes the use of biosurfactants and emerging algal technologies, such as applications of microalgae in nutraceuticals and biofuel production Details delignification for lignocellulosic biomass This interdisciplinary book offers researchers and practitioners in chemical engineering, environmental engineering, and related fields a broad perspective on fundamentals, technologies, and environmental applications of sustainable bioprocessing.
Download or read book Bioprocessing for Biofuel Production written by Neha Srivastava and published by Springer Nature. This book was released on 2020-10-28 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Converting biomass to biofuels involves hydrolyzing cellulose to sugars using cost-intensive commercial enzymes – an expensive step that makes large-scale production economically non-viable. As such, there is a need for low-cost bioprocessing. This book critically evaluates the available bioprocessing technologies for various biofuels, and presents the latest research in the field. It also highlights the recent developments, current challenges and viable alternative approaches to reduce the overall cost of producing biofuels.
Download or read book Bioprocessing for Value Added Products from Renewable Resources written by Shang-Tian Yang and published by Elsevier. This book was released on 2011-08-11 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioprocessing for Value-Added Products from Renewable Resources provides a timely review of new and unconventional techniques for manufacturing high-value products based on simple biological material. The book discusses the principles underpinning modern industrial biotechnology and describes a unique collection of novel bioprocesses for a sustainable future. This book begins in a very structured way. It first looks at the modern technologies that form the basis for creating a bio-based industry before describing the various organisms that are suitable for bioprocessing - from bacteria to algae - as well as their unique characteristics. This is followed by a discussion of novel, experimental bioprocesses, such as the production of medicinal chemicals, the production of chiral compounds and the design of biofuel cells. The book concludes with examples where biological, renewable resources become an important feedstock for large-scale industrial production. This book is suitable for researchers, practitioners, students, and consultants in the bioprocess and biotechnology fields, and for others who are interested in biotechnology, engineering, industrial microbiology and chemical engineering. ·Reviews the principles underpinning modern industrial biotechnology ·Provides a unique collection of novel bioprocesses for a sustainable future ·Gives examples of economical use of renewable resources as feedstocks ·Suitable for both non-experts and experts in the bioproduct industry
Download or read book Bioprocess Engineering written by Shijie Liu and published by Newnes. This book was released on 2012-11-21 with total page 1001 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioprocess Engineering involves the design and development of equipment and processes for the manufacturing of products such as food, feed, pharmaceuticals, nutraceuticals, chemicals, and polymers and paper from biological materials. It also deals with studying various biotechnological processes. "Bioprocess Kinetics and Systems Engineering" first of its kind contains systematic and comprehensive content on bioprocess kinetics, bioprocess systems, sustainability and reaction engineering. Dr. Shijie Liu reviews the relevant fundamentals of chemical kinetics-including batch and continuous reactors, biochemistry, microbiology, molecular biology, reaction engineering, and bioprocess systems engineering- introducing key principles that enable bioprocess engineers to engage in the analysis, optimization, design and consistent control over biological and chemical transformations. The quantitative treatment of bioprocesses is the central theme of this book, while more advanced techniques and applications are covered with some depth. Many theoretical derivations and simplifications are used to demonstrate how empirical kinetic models are applicable to complicated bioprocess systems. Contains extensive illustrative drawings which make the understanding of the subject easy Contains worked examples of the various process parameters, their significance and their specific practical use Provides the theory of bioprocess kinetics from simple concepts to complex metabolic pathways Incorporates sustainability concepts into the various bioprocesses
Download or read book Microalgae Based Systems written by Eduardo Jacob-Lopes and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-10-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process integration and intensification are means to improve the sustainability metrics of the industrial processes, balancing the pillars of economy, environment, and social demand. The book covers a sequential framework for the design and operation of microalgae-based facilities using process integration and intensifi cation, discusses products and applications,and provides a global perspective with contributions from renowned experts. Covers relevant opportunities of process integration and intensification applied to microalgae-based systems. Provides a complete review of the state of the art of these industrial approaches. Presents new insights into industrial sustainability.
Download or read book Bioreactors written by Lakhveer Singh and published by Elsevier. This book was released on 2020-04-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioreactors: Sustainable Design and Industrial Applications in Mitigation of GHG Emissions presents and compares the foundational concepts, state-of-the-art design and fabrication of bioreactors. Solidly based on theoretical fundamentals, the book examines various aspects of the commercially available bioreactors, such as construction and fabrication, design, modeling and simulation, development, operation, maintenance, management and target applications for biofuels production and bio-waste management. Emerging issues in commercial feasibility are explored, constraints and pathways for upscaling, and techno-economic assessment are also covered. This book provides researchers and engineers in the biofuels and waste management sectors a clear, at-a-glance understanding of the actual potential of different advanced bioreactors for their requirements. It is a must-have reference for better-informed decisions when selecting the appropriate technology models for sustainable systems development and commercialization. Focuses on sustainable bioreactor processes and applications in bioenergy and bio-waste management Explores techno-economic and sustainability assessment aspects through a comparative approach, catering to diverse arrays and applications Offers comprehensive coverage of the most recent technology, from fundamentals to applications
Download or read book Developments in Sustainable Chemical and Bioprocess Technology written by Ravindra Pogaku and published by Springer Science & Business Media. This book was released on 2013-11-26 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental sustainability and development is of critical importance. Technological advances in the production of new energy sources are making their way into our lives in more and more depth every day. However, there is an urgent need to address the technological challenges and advancement of the various chemical and bio-processes to maintain the dynamic sustainability of our energy needs. Toward that end, an attempt is being made to look at recent advances, key issues still faced and where possible, offer suggestions on alternative technologies to optimize sustainable processes. Still considered a new area of science, energy sources themselves are still being 'discovered'...meaning, what is financially viable in the current marketplace is changing. For example, energy from plants has not been financially viable in the past because of the high cost of growing, harvesting, breaking down cell walls, disposal of waste products, etc. Materials used to derive energy from sustainable resources is changing, making previously high-cost processes more efficient. It is crucial that the industry as a while works in tandem to develop crops that new technological advances make financially feasible. This book will cover recent advances in the chemicals, bioprocesses and other materials used in growing and extracting energy from sustainable products. Membrane/cell wall digestion issues will also be covered as well as recovering mamixal amounts of energy from sources to limit waste. Finally a section on safety and control will be presented with has been poorly covered in other publications.
Download or read book Control in Bioprocessing written by Pablo A. López Pérez and published by John Wiley & Sons. This book was released on 2020-03-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between bioscience and mathematics-based process engineering This book presents the most commonly employed approaches in the control of bioprocesses. It discusses the role that control theory plays in understanding the mechanisms of cellular and metabolic processes, and presents key results in various fields such as dynamic modeling, dynamic properties of bioprocess models, software sensors designed for the online estimation of parameters and state variables, and control and supervision of bioprocesses Control in Bioengineering and Bioprocessing: Modeling, Estimation and the Use of Sensors is divided into three sections. Part I, Mathematical preliminaries and overview of the control and monitoring of bioprocess, provides a general overview of the control and monitoring of bioprocesses, and introduces the mathematical framework necessary for the analysis and characterization of bioprocess dynamics. Part II, Observability and control concepts, presents the observability concepts which form the basis of design online estimation algorithms (software sensor) for bioprocesses, and reviews controllability of these concepts, including automatic feedback control systems. Part III, Software sensors and observer-based control schemes for bioprocesses, features six application cases including dynamic behavior of 3-dimensional continuous bioreactors; observability analysis applied to 2D and 3D bioreactors with inhibitory and non-inhibitory models; and regulation of a continuously stirred bioreactor via modeling error compensation. Applicable across all areas of bioprocess engineering, including food and beverages, biofuels and renewable energy, pharmaceuticals and nutraceuticals, fermentation systems, product separation technologies, wastewater and solid-waste treatment technology, and bioremediation Provides a clear explanation of the mass-balance–based mathematical modelling of bioprocesses and the main tools for its dynamic analysis Offers industry-based applications on: myco-diesel for implementing "quality" of observability; developing a virtual sensor based on the Just-In-Time Model to monitor biological control systems; and virtual sensor design for state estimation in a photocatalytic bioreactor for hydrogen production Control in Bioengineering and Bioprocessing is intended as a foundational text for graduate level students in bioengineering, as well as a reference text for researchers, engineers, and other practitioners interested in the field of estimation and control of bioprocesses.
Download or read book Bioprocess Engineering for a Green Environment written by V. Sivasubramanian and published by CRC Press. This book was released on 2018-05-04 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioprocess Engineering for a Green Environment examines numerous bioprocesses that are crucial to our day-to-day life, specifically the major issues surrounding the production of energy relating to biofuels and waste management. The nuance of this discussion is reflected by the text’s chapter breakdown, providing the reader with a fulsome investigation of the energy sector; the importance of third-generation fuels; and the application of micro- and macroalgae for the production of biofuels. The book also provides a detailed exploration of biocatalysts and their application to the food industry; bioplastics production; conversion of agrowaste into polysaccharides; as well as the importance of biotechnology in bio-processing. Numerous industries discharge massive amounts of effluents into our rivers, seas, and air systems. As such, two chapters are dedicated to the treatment of various pollutants through biological operation with hopes of achieving a cleaner, greener, environment. This book represents the most comprehensive study of bioprocessing—and its various applications to the environment—available on the market today. It was furthermore written with various researchers in mind, ranging from undergraduate and graduate students looking to enhance their knowledge of the topics presented to scholars and engineers interested in the bioprocessing field, as well as members of industry and policy-makers. Provides a comprehensive overview of bioprocesses that apply to day-to-day living. Is learner-centered, providing detailed diagrams for easy understanding. Explores the importance of biocatalysts and their applications to the food industry, as well as bioplastics production. Examines the unique capabilities of bioprocess engineering and its ability to treat various pollutants. .
Download or read book Biological Treatment of Industrial Wastewater written by Maulin P Shah and published by Royal Society of Chemistry. This book was released on 2021-11-18 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many industrial processes use water as a solvent and therefore produce wastewater containing chemicals from that process. The amounts of these chemicals and the types will vary hugely depending on the industry and the processes running and may include things that are hazardous to health or the environment. This makes the treatment of industrial wastewater both extremely important and highly complex. One route for industrial wastewater treatment is the use of bioreactors. Biological Treatment of Industrial Wastewater presents a comprehensive overview of the latest advances and trends in the use of bioreactors for treating industrial wastewater. Several different types of bioreactor and their applications are discussed, alongside trends and considerations important in designing bioreactors. Bringing together a wealth of different approaches and voices this book will be a useful resource for anyone working in water treatment or looking at how industrial processes can be made more environmentally friendly.
Download or read book Putting Biotechnology to Work written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of the United States to sustain a dominant global position in biotechnology lies in maintaining its primacy in basic life-science research and developing a strong resource base for bioprocess engineering and bioproduct manufacturing. This book examines the status of bioprocessing and biotechnology in the United States; current bioprocess technology, products, and opportunities; and challenges of the future and what must be done to meet those challenges. It gives recommendations for action to provide suitable incentives to establish a national program in bioprocess-engineering research, development, education, and technology transfer.
Download or read book Bioprocessing of Renewable Resources to Commodity Bioproducts written by Virendra S. Bisaria and published by John Wiley & Sons. This book was released on 2014-04-07 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the vision of a successful biorefinery—the lignocelluloic biomass needs to be efficiently converted to its constituent monomers, comprising mainly of sugars such as glucose, xylose, mannose and arabinose. Accordingly, the first part of the book deals with aspects crucial for the pretreatment and hydrolysis of biomass to give sugars in high yield, as well as the general aspects of bioprocessing technologies which will enable the development of biorefineries through inputs of metabolic engineering, fermentation, downstream processing and formulation. The second part of the book gives the current status and future directions of the biological processes for production of ethanol (a biofuel as well as an important commodity raw material), solvents (butanol, isobutanol, butanediols, propanediols), organic acids (lactic acid, 3-hydroxy propionic acid, fumaric acid, succinic acid and adipic acid), and amino acid (glutamic acid). The commercial production of some of these commodity bioproducts in the near future will have a far reaching effect in realizing our goal of sustainable conversion of these renewable resources and realizing the concept of biorefinery. Suitable for researchers, practitioners, graduate students and consultants in biochemical/ bioprocess engineering, industrial microbiology, bioprocess technology, metabolic engineering, environmental science and energy, the book offers: Exemplifies the application of metabolic engineering approaches for development of microbial cell factories Provides a unique perspective to the industry about the scientific problems and their possible solutions in making a bioprocess work for commercial production of commodity bioproducts Discusses the processing of renewable resources, such as plant biomass, for mass production of commodity chemicals and liquid fuels to meet our ever- increasing demands Encourages sustainable green technologies for the utilization of renewable resources Offers timely solutions to help address the energy problem as non-renewable fossil oil will soon be unavailable
Download or read book Bioremediation and Bioeconomy written by Majeti Narasimha Vara Prasad and published by Elsevier. This book was released on 2015-10-03 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioremediation and Bioeconomy provides a common platform for scientists from various backgrounds to find sustainable solutions to environmental issues, including the ever-growing lack of water resources which are under immense pressure due to land degradation, pollution, population explosion, urbanization, and global economic development. In addition, large amounts of toxic waste have been dispersed in thousands of contaminated sites and bioremediation is emerging as an invaluable tool for environmental clean-up. The book addresses these challenge by presenting innovative and cost-effective solutions to decontaminate polluted environments, including usage of contaminated land and waste water for bioproducts such as natural fibers, biocomposites, and fuels to boost the economy. Users will find a guide that helps scientists from various backgrounds find sustainable solutions to these environmental issues as they address the topical issues crucial for understanding new and innovative approaches for sustainable development. Provides a compilation of new information on phytoremediation not found in other books in the present market The first book to link phytoremediation and the bioeconomy Includes strategies to utilize contaminated soils for producing bioresources and co-generation of value chain and value additions products
Download or read book Advances in Bioprocess Engineering and Technology written by Doraiswami Ramkrishna and published by Springer Nature. This book was released on 2020-09-29 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select peer-reviewed proceedings of the International Conference on Advances in Bioprocess Engineering and Technology (ICABET 2020). The book covers all aspects of bioprocesses, especially related to fermentation technology, food technology, environmental biotechnology, and sustainable energy. Along with this primary theme, the focus is on recent advances in bioprocessing research such as biosensors, micro-reactors, novel separation techniques, bioprocess control, bio-safety, advanced techniques for waste to wealth generation, and nanobiotechnology. This contents are divided according to the major themes of the conference: (i) Fermentation Technology and Bioreactor, (ii) Food Pharmaceuticals and Health care, (iii) Environment and Agriculture, and (iv) Sustainable Energy. This book is intended to help students, researchers, and industry professionals acquire knowledge on innovative technologies and recent advancements in the field of bioprocess engineering and technology.
Download or read book Sustainable Bioprocessing for a Clean and Green Environment written by M. Jerold and published by CRC Press. This book was released on 2021-09-17 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Bioprocessing for a Clean and Green Environment: Concepts and Applications highlights the importance of waste to health in which waste is safely converted to value-added products via bioprocess technologies. Providing fundamental concepts and applications, this book also offers readers the methodology behind the operation of a variety of biological processes used in developing valuable products from waste. Features: Discusses synthesis and use of environmentally friendly biobased materials, such as biopolymer films and biobased plasticizers Highlights nanotechnology applications in the treatment of pollution and emphasizes the synthesis of biogenic nanomaterials for environmental remediation Describes the use of biosurfactants and emerging algal technologies, such as applications of microalgae in nutraceuticals and biofuel production Details delignification for lignocellulosic biomass This interdisciplinary book offers researchers and practitioners in chemical engineering, environmental engineering, and related fields a broad perspective on fundamentals, technologies, and environmental applications of sustainable bioprocessing.