Download or read book Biomedical Nanostructures written by Kenneth Gonsalves and published by John Wiley & Sons. This book was released on 2007-11-09 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to Use Nanoscale Materials to Design Novel Biomedical Devices and Applications Discover how to take full advantage of nanoscale materials in the design and fabrication of leading-edge biomedical devices. The authors introduce you to a variety of possible clinical applications such as drug delivery, diagnostics, and cancer therapy. In addition, the authors explore the interface between micron and nanoscale materials for the development of applications such as tissue engineering. Finally, they examine the mechanisms of cell interactions with material surfaces through the use of nanotechnology-based material processing and characterization methods. The text's three sections highlight its interdisciplinary approach: * Part One: Nanostructure Fabrication * Part Two: Bio-Nano Interfaces * Part Three: Clinical Applications of Nanostructures Among the key topics covered are nanotechnology in tissue regeneration; biomolecular engineering; receptor-ligand interactions; cell-biomaterial interactions; nanomaterials in diagnostics, drug delivery, and cancer therapy; and nano- and micron-level engineering and fabrication. Throughout the text, clear examples guide you through the chemistry and the processing involved in designing and developing nanoscale materials for biomedical devices. Each chapter begins with an introduction and ends with a conclusion highlighting the key points. In addition, references at the end of the chapter help you expand your research on any individual topic. In summary, this book helps biomedical researchers and engineers understand the physical phenomena that occur at the nanoscale in order to design novel cell-based constructs for a wide range of applications.
Download or read book Biomedical Applications of Nanoparticles written by Alexandru Mihai Grumezescu and published by William Andrew. This book was released on 2019-02-28 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical Applications of Nanoparticles describes the most interesting and investigated biomedical applications of nanoparticles, emphasizing their therapeutic impact. Progress made in the therapy of severe diseases, such as cancer and difficult infections is strictly correlated to the scientific progress and technological development in the field of materials science. Nanoparticles have numerous therapeutic applications, starting with the design of new drugs, delivery systems, therapeutic materials, and their contribution to the development of preventive strategies. The book highlights the impact of nanoparticles on the therapy of infections, antimicrobial effect and also anti-cancer strategies. Successful examples are given throughout the book, along with analysis in order to improve future outcomes of novel therapies. - Highlights the term nanotherapeutics and presents several classifications of nanotherapeutics from different points-of-view - Presents the recent progress related to nanotherapeutics in the oral cavity - Provides the recent progress in the field of biomedical nanoparticles
Download or read book Carbon Nanostructures for Biomedical Applications written by Tatiana Da Ros and published by Royal Society of Chemistry. This book was released on 2021-02-15 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanostructures, namely fullerenes, single and multiwall carbon nanotubes, graphene as well as the most recent graphene quantum dots and carbon nanodots, have experienced a tremendous progress along the last two decades in terms of the knowledge acquired on their chemical and physical properties. These insights have enabled their increasing use in biomedical applications, from scaffolds to devices. Edited by renowned experts in the subject, this book collects and delineates the most notable advances within the growing field surrounding carbon nanostructures for biomedical purposes. Exploration ranges from fundamentals around classifications to toxicity, biocompatibility and the immune response. Modified nanocarbon-based materials and emergent classes, such as carbon dots and nanohorns are discussed, with chapters devoted from carriers for drug delivery and inhibitors of emergent viruses infection, to applications across imaging, biosensors, tissue scaffolding and biotechnology. The book will provide a valuable reference resource and will extensively benefit researchers and professionals working across the fields of chemistry, materials science, and biomedical and chemical engineering.
Download or read book Advanced Micro and Nano manufacturing Technologies written by Shrikrishna Nandkishor Joshi and published by Springer Nature. This book was released on 2021-10-01 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the fundamentals and advancements in micro and nanomanufacturing technologies applied in the biomedical and biochemical domain. The contents of this volume provide comprehensive coverage of the physical principles of advanced manufacturing technologies and the know-how of their applications in the fabrication of biomedical devices and systems. The book begins by documenting the journey of miniaturization and micro-and nano-fabrication. It then delves into the fundamentals of various advanced technologies such as micro-wire moulding, 3D printing, lithography, imprinting, direct laser machining, and laser-induced plasma-assisted machining. It also covers laser-based technologies which are a promising option due to their flexibility, ease in control and application, high precision, and availability. These technologies can be employed to process several materials such as glass, polymers: polycarbonate, polydimethylsiloxane, polymethylmethacrylate, and metals such as stainless steel, which are commonly used in the fabrication of biomedical devices, such as microfluidic technology, optical and fiber-optic sensors, and electro-chemical bio-sensors. It also discusses advancements in various MEMS/NEMS based technologies and their applications in energy conversion and storage devices. The chapters are written by experts from the fields of micro- and nano-manufacturing, materials engineering, nano-biotechnology, and end-users such as clinicians, engineers, academicians of interdisciplinary background. This book will be a useful guide for academia and industry alike.
Download or read book Carbon Nanotubes for Biomedical Applications written by Rüdiger Klingeler and published by Springer Science & Business Media. This book was released on 2011-02-09 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the potential of multi-functional carbon nanotubes for biomedical applications. It combines contributions from chemistry, physics, biology, engineering, and medicine. The complete overview of the state-of-the-art addresses different synthesis and biofunctionalisation routes and shows the structural and magnetic properties of nanotubes relevant to biomedical applications. Particular emphasis is put on the interaction of carbon nanotubes with biological environments, i.e. toxicity, biocompatibility, cellular uptake, intracellular distribution, interaction with the immune system and environmental impact. The insertion of NMR-active substances allows diagnostic usage as markers and sensors, e.g. for imaging and contactless local temperature sensing. The potential of nanotubes for therapeutic applications is highlighted by studies on chemotherapeutic drug filling and release, targeting and magnetic hyperthermia studies for anti-cancer treatment at the cellular level.
Download or read book Nanoscale Fabrication Optimization Scale up and Biological Aspects of Pharmaceutical Nanotechnology written by Alexandru Mihai Grumezescu and published by William Andrew. This book was released on 2017-12-11 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Fabrication, Optimization, Scale-up and Biological Aspects of Pharmaceutical Nanotechnology focuses on the fabrication, optimization, scale-up and biological aspects of pharmaceutical nanotechnology. In particular, the following aspects of nanoparticle preparation methods are discussed: the need for less toxic reagents, simplification of the procedure to allow economic scale-up, and optimization to improve yield and entrapment efficiency. Written by a diverse range of international researchers, the chapters examine characterization and manufacturing of nanomaterials for pharmaceutical applications. Regulatory and policy aspects are also discussed. This book is a valuable reference resource for researchers in both academia and the pharmaceutical industry who want to learn more about how nanomaterials can best be utilized. - Shows how nanomanufacturing techniques can help to create more effective, cheaper pharmaceutical products - Explores how nanofabrication techniques developed in the lab have been translated to commercial applications in recent years - Explains safety and regulatory aspects of the use of nanomanufacturing processes in the pharmaceutical industry
Download or read book Biological Nanostructures and Applications of Nanostructures in Biology written by Michael A. Stroscio and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological Nanostructures and Applications of Nanostructures in Biology: Electrical, Mechanical, and Optical Properties contains reviews and discussions of contemporary and relevant topics dealing with the interface between the science and technology of nanostructures and the science of biology. Moreover, this book supplements these past groundbreaking discoveries with discussions of promising new avenues of research that reveal the enormous potential of emerging approaches in nanobiotechnology. The topics include: - Biomedical applications of semiconductor quantum dots, - Integrating and tagging biological structures with nanoscale quantum dots, - Applications of carbon nanotubes in bioengineering, - Nanophysical properties of living cells, - Bridging natural nanotubes with fabricated nanotubes, - Bioinspired approaches to building nanoscale devices and systems, - Hairpin formation in polynucleotides. This state-of-the-art survey of key developments in nanotechnology - as they apply to bioengineering and biology - is essential reading for all academics, biomedical engineers, medical physicists, and industry professionals wishing to take advantage of the latest developments and highly-promising discoveries in nanoscience underlying applications in bioengineering and biology.
Download or read book Micro and Nanofabrication Using Self Assembled Biological Nanostructures written by Jaime Castillo-León and published by William Andrew. This book was released on 2014-09-09 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-assembled nanostructures based on peptides and proteins have been investigated and presented as biomaterials with an impressive potential for a broad range of applications such as microfabrication, biosensing platforms, drug delivery systems, bioelectronics and tissue reparation. Through self-assembly peptides can give rise to a range of well-defined nanostructures such as nanotubes, nanofibers, nanoparticles, nanotapes, gels and nanorods. However, there are challenges when trying to integrate these biological nanostructures in the development of sensing devices or drug-delivery systems – challenges such as controlling the size during synthesis, the stability in liquid environments and manipulation. In "Micro and Nanofabrication Using Self-assembled Biological Nanostructures" the options and challenges when using self-assembled peptide nanostructures in micro and nanofabrication are discussed. The publication covers different ways to manipulate, deposit and immobilize on specific locations these biological nanostructures in order to use them in the fabrication of new structures or as part of biosensing platforms. Examples where researchers used biological nanostructures for those types of applications are provided. Finally, future applications are discussed as well as parameters to accelerate and expand the use of these biological building blocks in nano- and micro-fabrication processes by taking advantage of their impressive properties such as low-cost and short synthesis time.
Download or read book Carbon Nanostructures for Biomedical Applications written by Tatiana Da Ros and published by Royal Society of Chemistry. This book was released on 2021-02-03 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanostructures, namely fullerenes, single and multiwall carbon nanotubes, graphene as well as the most recent graphene quantum dots and carbon nanodots, have experienced a tremendous progress along the last two decades in terms of the knowledge acquired on their chemical and physical properties. These insights have enabled their increasing use in biomedical applications, from scaffolds to devices. Edited by renowned experts in the subject, this book collects and delineates the most notable advances within the growing field surrounding carbon nanostructures for biomedical purposes. Exploration ranges from fundamentals around classifications to toxicity, biocompatibility and the immune response. Modified nanocarbon-based materials and emergent classes, such as carbon dots and nanohorns are discussed, with chapters devoted from carriers for drug delivery and inhibitors of emergent viruses infection, to applications across imaging, biosensors, tissue scaffolding and biotechnology. The book will provide a valuable reference resource and will extensively benefit researchers and professionals working across the fields of chemistry, materials science, and biomedical and chemical engineering.
Download or read book Carbon Nanostructures in Biomedical Applications written by Md Saquib Hasnain and published by Springer Nature. This book was released on 2023-05-04 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a holistic compilation on applications of carbon nanostructures, especially in advanced healthcare applications. It comprises chapters on utility of diverse multifunctional nanocarriers in drug delivery and biomedical applications, especially emphasizing on the synthesis and characterizations of nanosystems along with surface engineering approaches used for active targeting of the drugs. Moreover, the chapters also include the recent updates on the applications of the nanocarriers to fulfill the needs of various healthcare systems.
Download or read book Materials for Biomedical Engineering Organic Micro and Nanostructures written by Alexandru Grumezescu and published by Elsevier. This book was released on 2019-06-18 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Biomedical Engineering: Organic Micro- and Nanostructures provides an updated perspective on recent research regarding the use of organic particles in biomedical applications. The different types of organic micro- and nanostructures are discussed, as are innovative applications and new synthesis methods. As biomedical applications of organic micro- and nanostructures are very diverse and their impact on modern and future therapy, diagnosis and prophylaxis of diseases is huge, this book presents a timely resource on the topic. Users will find the latest information on cancer and gene therapy, diagnosis, drug delivery, green synthesis of nano- and microparticles, and much more. - Provides knowledge of the range of organic micro- and nanostructures available, enabling the reader to make optimal materials selection decisions - Presents detailed information on current and proposed applications of the latest biomedical materials - Places a strong emphasis on the characterization, production and use of organic nanoparticles in biomedicine, such as gene therapy, DNA interaction and cancer management
Download or read book Two Dimensional Nanostructures for Biomedical Technology written by Raju Khan and published by Elsevier. This book was released on 2019-11-05 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two Dimensional Nanostructures for Biomedical Technology: A Bridge between Materials Science and Bioengineering helps researchers to understand the promising aspects of two dimensional nanomaterials. Sections cover the biomedical applications of such nanostructures in terms of their precursors, structures, morphology and size. Further, detailed synthetic methodologies guide the reader towards the efficient generation of two dimensional nanostructures. The book encompasses the vital aspects of two dimensional nanomaterials in context of their utility in biomedical technology, thus presenting a thorough guide for researchers in this area. - Details the latest on the structure, morphology and shape-size accords of two dimensional nanomaterials - Includes synthetic strategies with feasibility for sustainability - Reports on two dimensional nanostructures in biomedical technology, including bio-imaging, biosensing, drug delivery and tissue engineering
Download or read book Engineered Nanostructures for Therapeutics and Biomedical Applications written by Ajeet Kumar Kaushik and published by Woodhead Publishing. This book was released on 2022-08-31 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineered Nanostructures for Therapeutics and Biomedical Applications offers a single reference for a diverse biomedical readership to learn about the application of nanotechnology in biomedicine and biomedical engineering, from past developments to current research and future prospects. This book sets out a broad selection of biomedical and therapeutic applications for nanostructures, including bioimaging, nanorobotics, orthopedics, and tissue engineering, offering a useful, multidisciplinary approach. Each chapter discusses challenges faced in each discipline, including limiting factors, biocompatibility, and toxicity, thus enabling the reader to make informed decisions in their research.This book is a comprehensive, broad overview of the role and significance of nanomaterials and their composites that also includes discussions of key aspects in the field of biomedicine. It will be of significant interest to academics and researchers in materials science and engineering, biomedicine and biomedical engineering, chemical engineering, pharmaceutics, bioimaging, and nanorobotics. - Provides a broad overview of the many applications of nanomaterials and nanotechnology in biomedicine and engineering - Offers a multidisciplinary approach that will appeal to a diverse readership, including those in biomedical engineering, materials science, biomedicine, and pharmaceutics - Includes challenges faced and limiting factors for each application, allowing readers to make an informed decision when using nanomaterials in their research
Download or read book Biofabrication of Nanostructures for Environmental Agricultural and Biomedical Applications written by Sougata Ghosh and published by Frontiers Media SA. This book was released on 2023-10-18 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optically Induced Nanostructures written by Karsten König and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-05-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructuring of materials is a task at the heart of many modern disciplines in mechanical engineering, as well as optics, electronics, and the life sciences. This book includes an introduction to the relevant nonlinear optical processes associated with very short laser pulses for the generation of structures far below the classical optical diffraction limit of about 200 nanometers as well as coverage of state-of-the-art technical and biomedical applications. These applications include silicon and glass wafer processing, production of nanowires, laser transfection and cell reprogramming, optical cleaning, surface treatments of implants, nanowires, 3D nanoprinting, STED lithography, friction modification, and integrated optics. The book highlights also the use of modern femtosecond laser microscopes and nanoscopes as novel nanoprocessing tools.
Download or read book Supramolecular Assembly Based Functional Nanostructures for Biomedical Applications written by Tianjiao Ji and published by Frontiers Media SA. This book was released on 2021-02-26 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Nanoparticles for Biomedicine written by Gianni Ciofani and published by Elsevier. This book was released on 2018-05-12 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Nanoparticles for Biomedicine explores smart nanoparticles that change their structural or functional properties in response to specific external stimuli (electric or magnetic fields, electromagnetic radiation, ultrasound, etc.). Particular attention is given to multifunctional nanostructured materials that are pharmacologically active and that can be actuated by virtue of their magnetic, dielectric, optically-active, redox-active, or piezoelectric properties. This important reference resource will be of great value to readers who want to learn more on how smart nanoparticles can be used to create more effective treatment solutions. Nanotechnology has enabled unprecedented control of the interactions between materials and biological entities, from the microscale, to the molecular level. Nanosurfaces and nanostructures have been used to mimic or interact with biological microenvironments, to support specific biological functions, such as cell adhesion, mobility and differentiation, and in tissue healing. Recently, a new paradigm has been proposed for nanomedicine to exploit the intrinsic properties of nanomaterials as active devices rather than as passive structural units or carriers for medications. - Discusses the synthesis, characterization and applications of a new generation of smart nanoparticles for nanomedicine applications - Explores the problems relating to the biocompatibility of a range of nanoparticles, outlining potential solutions - Describes techniques for manipulating specific classes of nanoparticles for a variety of treatment types
