Download or read book Biomaterials Medical Devices and Tissue Engineering An Integrated Approach written by F.H. Silver and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: are then selected and must meet the general 'biocompatibility' require ments. Prototypes are built and tested to include biocompatibility evalua tions based on ASTM standard procedures. The device is validated for sterility and freedom from pyrogens before it can be tested on animals or humans. Medical devices are classified as class I, II or III depending on their invasiveness. Class I devices can be marketed by submitting notification to the FDA. Class II and III devices require either that they show equivalence to a device marketed prior to 1976 or that they receive pre-marketing approval. The time from device conception to FDA approval can range from months (class I device) to in excess of ten years (class III device). Therefore, much planning is necessary to pick the best regulatory approach. 2. Wound Dressings and Skin Replacement 2.1 Introduction Wounds to the skin are encountered every day. Minor skin wounds cause some pain, but these wounds will heal by themselves in time. Even though many minor wounds heal effectively without scarring in the absence of treatment, they heal more rapidly if they are kept clean and moist. Devices such as Band-Aids are used to assist in wound healing. For deeper wounds, a variety of wound dressings have been developed including cell cultured artificial skin. These materials are intended to promote healing of skin damaged or removed as a result of skin grafting, ulceration, burns, cancer excision or mechanical trauma.
Download or read book Biomaterials Medical Devices and Tissue Engineering An Integrated Approach written by Frederick Silver and published by Springer Science & Business Media. This book was released on 1993-11-30 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: are then selected and must meet the general 'biocompatibility' require ments. Prototypes are built and tested to include biocompatibility evalua tions based on ASTM standard procedures. The device is validated for sterility and freedom from pyrogens before it can be tested on animals or humans. Medical devices are classified as class I, II or III depending on their invasiveness. Class I devices can be marketed by submitting notification to the FDA. Class II and III devices require either that they show equivalence to a device marketed prior to 1976 or that they receive pre-marketing approval. The time from device conception to FDA approval can range from months (class I device) to in excess of ten years (class III device). Therefore, much planning is necessary to pick the best regulatory approach. 2. Wound Dressings and Skin Replacement 2.1 Introduction Wounds to the skin are encountered every day. Minor skin wounds cause some pain, but these wounds will heal by themselves in time. Even though many minor wounds heal effectively without scarring in the absence of treatment, they heal more rapidly if they are kept clean and moist. Devices such as Band-Aids are used to assist in wound healing. For deeper wounds, a variety of wound dressings have been developed including cell cultured artificial skin. These materials are intended to promote healing of skin damaged or removed as a result of skin grafting, ulceration, burns, cancer excision or mechanical trauma.
Download or read book Biomaterials in the Design and Reliability of Medical Devices written by Michael N. Helmus and published by Springer Science & Business Media. This book was released on 2003-01-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the responsibility of medical device designers and engineers to eliminate sites of failure and to test devices to demonstrate their ultimate safety and efficacy. It also evaluates biomaterials and their properties as related to the design and reliability of medical devices. The principles that are described are readily applicable to the biomaterial scaffolds used for generating tissue-engineered constructs.
Download or read book Biomaterials Medical Devices and Tissue Engineering written by Frederick H. Silver and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomaterials and Medical Devices written by Ferdyansyah Mahyudin and published by Springer. This book was released on 2016-02-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an introduction to biomaterials with the focus on the current development and future direction of biomaterials and medical devices research and development in Indonesia. It is the first biomaterials book written by selected academic and clinical experts experts on biomaterials and medical devices from various institutions and industries in Indonesia. It serves as a reference source for researchers starting new projects, for companies developing and marketing products and for governments setting new policies. Chapter one covers the fundamentals of biomaterials, types of biomaterials, their structures and properties and the relationship between them. Chapter two discusses unconventional processing of biomaterials including nano-hybrid organic-inorganic biomaterials. Chapter three addresses biocompatibility issues including in vitro cytotoxicity, genotoxicity, in vitro cell models, biocompatibility data and its related failure. Chapter four describes degradable biomaterial for medical implants, which include biodegradable polymers, biodegradable metals, degradation assessment techniques and future directions. Chapter five focuses on animal models for biomaterial research, ethics, care and use, implantation study and monitoring and studies on medical implants in animals in Indonesia. Chapter six covers biomimetic bioceramics, natural-based biocomposites and the latest research on natural-based biomaterials in Indonesia. Chapter seven describes recent advances in natural biomaterial from human and animal tissue, its processing and applications. Chapter eight discusses orthopedic applications of biomaterials focusing on most common problems in Indonesia, and surgical intervention and implants. Chapter nine describes biomaterials in dentistry and their development in Indonesia.
Download or read book Biomaterials and Tissue Engineering written by Donglu Shi and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current interest in developing novel materials has motivated an increasing need for biological and medical studies in a variety of dinical applications. Indeed, it is dear that to achieve the requisite mechanical, chemical and biomedical properties, especially for new bioactive materials, it is necessary to develop novel synthesis routes. The tremendous success of materials science in developing new biomaterials and fostering technological innovation arises from its focus on interdisciplinary research and collaboration between materials and medical sciences. Materials scientists seek to relate one natural phenomenon to the basic structures of the materials and to recognize the causes and effects of the phenomena. In this way, they have developed explanations for the changing of the properties, the reactions of the materials to the environment, the interface behaviors between the artificial materials and human tissue, the time effects on the materials, and many other natural occurrences. By the same means, medical scientists have also studied the biological and medical effects of these materials, and generated the knowledge needed to produce useful medical devices. The concept of biomaterials is one of the most important ideas ever generated by the application of materials science to the medical field. In traditional materials research, interest focuses primarilyon the synthesis , structure, and mechanical properties of materials commonly used for structural purposes in industry, for instance in mechanical parts of machinery.
Download or read book Biomaterials written by Nesrin Hasirci and published by Springer Science & Business Media. This book was released on 2010-02-23 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials: From Molecules to Engineered Tissue gives examples of the application areas of biomaterials involving molecules at one end of the spectrum and finished devices in the other. It covers molecular approaches as well as molecules functional in preparing and modifying biomaterials, medical devices and systems, tissue engineering and artificial organs. Chapters on biomedical informatics and ethics complement the design and production aspects with their contribution in informatics and ethical concerns of biomedical research. This is a reference book for the advanced graduate student eager to learn the biomaterials area and for all researchers working in medicine, pharmacy, engineering and basic sciences in universities, hospitals, and industry involved in biomaterials and biomedical device production.
Download or read book Biomaterials written by S.V. Bhat and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: As biomaterials are used in medical devices, meeting needs in such diverse surgical disciplines as ophthalmology, cardiology, neuromuscular surgery, orthopaedics, dentistry, etc., they must have intimate contact with patient's tissue or body fluids, providing a real physical interface which seriously restricts developments. This book is written for those who would like to advance their knowledge of biomaterials. The subject matter of the book is divided into twelve chapters dealing with the structure and relationship of biological and man-made biomaterials. The application of these materials for various medical devices, and recent developments in tissue engineering, are also discussed.
Download or read book Biologically Responsive Biomaterials for Tissue Engineering written by Iulian Vasile Antoniac and published by Springer Science & Business Media. This book was released on 2012-09-07 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in the area of biomaterials, bionanotechnology, tissue engineering, and medical devices are becoming the core of health care. Almost all medical specialties involve the use of biomaterials, and research plays a key role in the development of new and improved treatment modalities. This volume focuses on several current trends in tissue engineering, remodelling and regeneration. Leading researchers describe the use of nanomaterials to create new functionalities when interfaced with biological molecules or structures. In addition to coverage of basic science and engineering aspects, a range of applications in bionanotechnology are presented, including diagnostic devices, contrast agents, analytical tools, physical therapy applications, and vehicles for targeted drug delivery. The use of polymers, alloys, and composites, or a combination of these, for biomaterials applications in orthopaedics is also explored. These contributions represent essential reading for the biomaterials and biomedical engineering communities, and can serve as instructional course lectures targeted at graduate and post-graduate students.
Download or read book Electrofluidodynamic Technologies EFDTs for Biomaterials and Medical Devices written by Vincenzo Guarino and published by Woodhead Publishing. This book was released on 2018-01-21 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrofluidodynamic Technologies (EFDTs) for Biomaterials and Medical Devices: Principles and Advances focuses on the fundamentals of EFDTs - namely electrospinning, electrospraying and electrodynamic atomization - to develop active platforms made of synthetic or natural polymers for use in tissue engineering, restoration and therapeutic treatments. The first part of this book deals with main technological aspects of EFDTs, such as basic technologies and the role of process parameters. The second part addresses applications of EFDTs in biomedical fields, with chapters on their application in tissue engineering, molecular delivery and implantable devices. This book is a valuable resource for materials scientists, biomedical engineers and clinicians alike. Presents a complete picture of Electrofluidodynamic technologies and their use in biomedicine Provides a comprehensive, professional reference on the subject, covering materials processing, fabrication and the use of novel devices for tissue engineering and therapeutics Focuses on technological advances, with an emphasis on studies and clinical trials
Download or read book Metallic Biomaterials Processing and Medical Device Manufacturing written by Cuie Wen and published by Woodhead Publishing. This book was released on 2020-08-20 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Biomaterials Processing and Medical Device Manufacturing details the principles and practices of the technologies used in biomaterials processing and medical device manufacturing. The book reviews the main categories of metallic biomaterials and the essential considerations in design and manufacturing of medical devices. It bridges the gap between the designing of biomaterials and manufacturing of medical devices including requirements and standards. Main themes of the book include, manufacturing, coatings and surface modifications of medical devices, metallic biomaterials and their mechanical behaviour, degradation, testing and characterization, and quality controls, standards and FDA regulations of medical devices. The leading experts in the filed discuss the requirements, challenges, recent progresses and future research directions in the processing of materials and manufacturing of medical devices. Metallic Biomaterials Processing and Medical Device Manufacturing is ideal for those working in the disciplines of materials science, manufacturing, biomedical engineering, and mechanical engineering. Reviews key topics of biomaterials processing for medical device applications including metallic biomaterials and their mechanical behavior, degradation, testing and characterization Bridges the gap between biomaterials design and medical device manufacturing Discusses the quality controls, standards, and FDA requirements for biomaterials and medical devices
Download or read book Biomaterials Research Advances written by Jason B. Kendall and published by Nova Publishers. This book was released on 2007 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials serve as synthetic or natural materials used to replace parts of living systems or to function contact with living tissue. Biomaterials are intended to interface with biological systems to evaluate, treat, augment or replace any tissue, organ or function of the body. A biomaterial is different from a biological material such as bone that is produced by a biological system. Artificial hips, vascular-stents, artificial pacemakers, and catheters are all made from different biomaterials and comprise different medical devices. This book presents new approaches to biomaterial development including multi-field bone remodelling, novel strategies for conferring antibacterial properties to bone cement, polyacrylonitrile-based biomaterials for enzyme immobilisation and functionalised magnetic nanoparticles for tissue engineering from around the globe.
Download or read book Biomaterials written by Sujata V. Bhat and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: As biomaterials are used in medical devices, providing needs in such diverse surgical disciplines as ophthalmology, cardiology, neuromuscular surgery, orthopedics, dentistry etc., they must have intimate contact with patient's tissue or body fluid providing a real physical interface, which restricts developments most seriously. This book is written for those who would like to advance their knowledge of biomaterials. The subject matter of the book is divided into twelve chapters dealing with structure and relationship of biological and man made biomaterials. The application of these materials for various medical devices and recent developments in tissue engineering has also covered.
Download or read book Biomaterials Science written by William R Wagner and published by Academic Press. This book was released on 2020-05-23 with total page 1612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of the renowned and bestselling title is the most comprehensive single text on all aspects of biomaterials science from principles to applications. Biomaterials Science, fourth edition, provides a balanced, insightful approach to both the learning of the science and technology of biomaterials and acts as the key reference for practitioners who are involved in the applications of materials in medicine.This new edition incorporates key updates to reflect the latest relevant research in the field, particularly in the applications section, which includes the latest in topics such as nanotechnology, robotic implantation, and biomaterials utilized in cancer research detection and therapy. Other additions include regenerative engineering, 3D printing, personalized medicine and organs on a chip. Translation from the lab to commercial products is emphasized with new content dedicated to medical device development, global issues related to translation, and issues of quality assurance and reimbursement. In response to customer feedback, the new edition also features consolidation of redundant material to ensure clarity and focus. Biomaterials Science, 4th edition is an important update to the best-selling text, vital to the biomaterials’ community. The most comprehensive coverage of principles and applications of all classes of biomaterials Edited and contributed by the best-known figures in the biomaterials field today; fully endorsed and supported by the Society for Biomaterials Fully revised and updated to address issues of translation, nanotechnology, additive manufacturing, organs on chip, precision medicine and much more. Online chapter exercises available for most chapters
Download or read book Biomaterials and Materials for Medicine written by Jingan Li and published by CRC Press. This book was released on 2021-09-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials and Materials for Medicine: Innovations in Research, Devices, and Applications provides an application-oriented summary of innovations in this rapidly evolving field, offering a view of various directions in biomaterials and medical materials and their advanced uses. Highlights vascular, orthopedic, skin tissue engineering, and nerve tissue engineering biomaterials, including the latest research on therapeutic devices and implants Introduces special stent materials for palliative treatment of esophageal cancer and related technologies of surface modification Discusses use of biomaterials and related designs in drug targeting and controlled release Describes wearable biomedical devices, biomimetic materials, and micronscale and nanoscale biomaterials Details the theoretical calculation and computer simulation of biomaterials as a complementary discipline with physical experimental science This book is aimed at an interdisciplinary group of researchers working on development and application of biomaterials for medical applications in the fields of materials scientists, biomedical engineering, and medicine.
Download or read book Encyclopedia of Biomedical Engineering written by and published by Elsevier. This book was released on 2018-09-01 with total page 2069 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Biomedical Engineering, Three Volume Set is a unique source for rapidly evolving updates on topics that are at the interface of the biological sciences and engineering. Biomaterials, biomedical devices and techniques play a significant role in improving the quality of health care in the developed world. The book covers an extensive range of topics related to biomedical engineering, including biomaterials, sensors, medical devices, imaging modalities and imaging processing. In addition, applications of biomedical engineering, advances in cardiology, drug delivery, gene therapy, orthopedics, ophthalmology, sensing and tissue engineering are explored. This important reference work serves many groups working at the interface of the biological sciences and engineering, including engineering students, biological science students, clinicians, and industrial researchers. Provides students with a concise description of the technologies at the interface of the biological sciences and engineering Covers all aspects of biomedical engineering, also incorporating perspectives from experts working within the domains of biomedicine, medical engineering, biology, chemistry, physics, electrical engineering, and more Contains reputable, multidisciplinary content from domain experts Presents a ‘one-stop’ resource for access to information written by world-leading scholars in the field
Download or read book Biomaterials written by Qizhi Chen and published by CRC Press. This book was released on 2014-12-15 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores Biomedical Science from a Unique Perspective Biomaterials: A Basic Introduction is a definitive resource for students entering biomedical or bioengineering disciplines. This text offers a detailed exploration of engineering and materials science, and examines the boundary and relationship between the two. Based on the author’s course lecture notes and many years of research, it presents students with the knowledge needed to select and design biomaterials used in medical devices. Placing special emphasis on metallic, ceramic, polymeric, and composite biomaterials, it explains the difference between materials science and materials engineering, introduces basic concepts and principles, and analyzes the critically important properties of biomaterials. Explains Complex Theories Using Aspects of Daily Life This text provides an appropriate balance between depth and broadness of coverage, and offers an understanding of the most important concepts and principles to students from a wide academic spectrum. It delivers the science of biomaterials in laymen terms, from a material standpoint, as well as a clinical applications point of view. It equips students majoring in materials science/engineering with knowledge on the fundamentals of how biomaterials behave at a biological level, and provides students majoring in medicine with information that is generally unavailable in traditional medical courses. The authors incorporate learning objectives at the beginning of each chapter, as well as chapter highlights, problems, and exercises at the end of each chapter. In addition, they present objectives, suggested activities, and reference material for further reading. Contains an overview of medical science vis-à-vis materials science, describes anatomy, histology, and cell biology Highlights health issues and diseases where biomaterials can easily find medical applications Presents knowledge of the relationship between the biomaterials and the living body Evaluates medical devices and looks into their respective regulations Biomaterials: A Basic Introduction contains an overview of basic biomaterials and concepts, and is written for upper-division students in the US/Canada, and second-level students in universities worldwide.
