Download or read book Biomass Gasification and Power Generation Using Advanced Gas Turbine Systems written by and published by . This book was released on 2002 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multidisciplined team led by the United Technologies Research Center (UTRC) and consisting of Pratt & Whitney Power Systems (PWPS), the University of North Dakota Energy & Environmental Research Center (EERC), KraftWork Systems, Inc. (kWS), and the Connecticut Resource Recovery Authority (CRRA) has evaluated a variety of gasified biomass fuels, integrated into advanced gas turbine-based power systems. The team has concluded that a biomass integrated gasification combined-cycle (BIGCC) plant with an overall integrated system efficiency of 45% (HHV) at emission levels of less than half of New Source Performance Standards (NSPS) is technically and economically feasible. The higher process efficiency in itself reduces consumption of premium fuels currently used for power generation including those from foreign sources. In addition, the advanced gasification process can be used to generate fuels and chemicals, such as low-cost hydrogen and syngas for chemical synthesis, as well as baseload power. The conceptual design of the plant consists of an air-blown circulating fluidized-bed Advanced Transport Gasifier and a PWPS FT8 TwinPac{trademark} aeroderivative gas turbine operated in combined cycle to produce ≈80 MWe. This system uses advanced technology commercial products in combination with components in advanced development or demonstration stages, thereby maximizing the opportunity for early implementation. The biofueled power system was found to have a levelized cost of electricity competitive with other new power system alternatives including larger scale natural gas combined cycles. The key elements are: (1) An Advanced Transport Gasifier (ATG) circulating fluid-bed gasifier having wide fuel flexibility and high gasification efficiency; (2) An FT8 TwinPac{trademark}-based combined cycle of approximately 80 MWe; (3) Sustainable biomass primary fuel source at low cost and potentially widespread availability-refuse-derived fuel (RDF); (4) An overall integrated system that exceeds the U.S. Department of Energy (DOE) goal of 40% (HHV) efficiency at emission levels well below the DOE suggested limits; and (5) An advanced biofueled power system whose levelized cost of electricity can be competitive with other new power system alternatives.
Download or read book ADVANCED GASIFICATION BASED FUEL CONVERSION AND ELECTRIC ENERGY PRODUCTION SYSTEM written by and published by . This book was released on 2002 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boise Paper Solutions and the Gas Technology Institute (GTI) are cooperating to develop, demonstrate and place in continuous operation an advanced biomass gasification-based power generation system suitable for near-term commercial deployment in the Forest Products Industry. The system will be used in conjunction with, rather than in place of, existing wood waste fired boilers and flue gas cleanup systems. The novel system will include three advanced technological components based on GTI's RENUGAS{reg_sign} and three-stage stoker combustion technologies, and a gas turbine-based power generation concept developed in DOE's High Performance Power System (HIPPS) program. The system has, as its objective, to avoid the major hurdles of high-pressure gasification, i.e., high-pressure fuel feeding and ash removal, and hot gas cleaning that are typical for conventional IGCC power generation. It aims to also minimize capital intensity and technology risks. The system is intended to meet the immediate needs of the forest products industry for highly efficient and environmentally friendly electricity and steam generation systems utilizing existing wood waste as fuel resources. The overall objective of this project is to demonstrate the commercial applicability of an advanced biomass gasification-based power generation system at Boise Paper Solutions' pulp and paper mill located at DeRidder, Louisiana.
Download or read book Advanced Power Generation Systems written by Ibrahim Dincer and published by Academic Press. This book was released on 2014-07-15 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Power Generation Systems examines the full range of advanced multiple output thermodynamic cycles that can enable more sustainable and efficient power production from traditional methods, as well as driving the significant gains available from renewable sources. These advanced cycles can harness the by-products of one power generation effort, such as electricity production, to simultaneously create additional energy outputs, such as heat or refrigeration. Gas turbine-based, and industrial waste heat recovery-based combined, cogeneration, and trigeneration cycles are considered in depth, along with Syngas combustion engines, hybrid SOFC/gas turbine engines, and other thermodynamically efficient and environmentally conscious generation technologies. The uses of solar power, biomass, hydrogen, and fuel cells in advanced power generation are considered, within both hybrid and dedicated systems. The detailed energy and exergy analysis of each type of system provided by globally recognized author Dr. Ibrahim Dincer will inform effective and efficient design choices, while emphasizing the pivotal role of new methodologies and models for performance assessment of existing systems. This unique resource gathers information from thermodynamics, fluid mechanics, heat transfer, and energy system design to provide a single-source guide to solving practical power engineering problems. The only complete source of info on the whole array of multiple output thermodynamic cycles, covering all the design options for environmentally-conscious combined production of electric power, heat, and refrigeration Offers crucial instruction on realizing more efficiency in traditional power generation systems, and on implementing renewable technologies, including solar, hydrogen, fuel cells, and biomass Each cycle description clarified through schematic diagrams, and linked to sustainable development scenarios through detailed energy, exergy, and efficiency analyses Case studies and examples demonstrate how novel systems and performance assessment methods function in practice
Download or read book Power Generation Using Advanced Thermochemical Gasification of Biomass written by Robert J. Cattolica and published by . This book was released on 2012 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Biomass Gasification written by Steffen Heidenreich and published by Academic Press. This book was released on 2016-06-07 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Biomass Gasification: New Concepts for Efficiency Increase and Product Flexibility provides a thorough overview on new concepts in biomass gasification and consolidated information on advances for process integration and combination, which could otherwise only be gained by reading a high number of journal publications. Heidenreich, Müller and Foscolo, highly respected experts in this field, start their exploration with the compact UNIQUE reactor, gasification and pyrolysis, gasification and combustion, and catalysts and membranes. The authors then examine biomass pre-treatment processes, taking into account the energy balance of the overall conversion process, and look into oxygen-steam gasification and solutions for air separation, including new options for integration of O2-membranes into the gasifier. Several polygeneration strategies are covered, including combined heat and power (CHP) production with synthetic natural gas (SNG), biofuels and hydrogen, and new cutting-edge concepts, such as plasma gasification, supercritical water gasification, and catalytic gasification, which allows for insights on the future technological outlook of the area. This book is then a valuable resource for industry and academia-based researchers, as well as graduate students in the energy and chemical sectors with interest in biomass gasification, especially in areas of power engineering, bioenergy, chemical engineering, and catalysis. Explores state-of-the-art technologies that allow for greater efficiency and flexibility in gasification, including process integration, combination, and polygeneration strategies Consolidates information that was, up until now, scattered among several sources, including journal articles Provides a valuable resource for industry and academia-based researchers, as well as graduate students in the energy and chemical sectors with interest in biomass gasification, especially in areas of power engineering, bioenergy, chemical engineering, and catalysis
Download or read book Assessment of Novel Power Generation Systems for the Biomass Industry written by and published by . This book was released on 1911 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this programme of research is to produce a method for assessing and optimising the performance of advanced gas turbine power plants for electricity generation within the Brazilian electric sector. With the privatisation of the Brazilian electric sector, interest has been given to the thermal plants and studies have been carried out along with the use of other alternative fuels rather than fossil fuels. Biomass is a fuel of increasing interest for power generation systems since it is clean and renewable. Essentially all biomass power plants in the Brazilian market today operate on a steam Rankine cycle, which has a poor efficiency. The Brazilian electricity market has paid attention on Biomass integrated gasification gas turbine (BIG/GT) combined cycle plants where solid biomass is gasified. A simple chemical model for representing the gasifier in the power plant is presented and optimisation of the gasification process has been applied. The method for assessing the performance of power plants takes into account not only energy, but it applies the exergy method, which uses the second law of thermodynamics and works out the destruction of energy inside plant components and energy losses rejected to atmosphere. A thermoeconomic model for assessing the power plant has also been described. The optimisation of the assessment method of power plants using exergy and thermoeconomics has been proposed based on genetic algorithms. This new technique has been fairly successful at solving optimisation problems and is easy to implement. The decision of applying genetic algorithms is due to the complexity of the mathematical model applied in the performance assessment of power plants. The assessment of combined cycles like gas / steam cycle, gas / air cycle, gas / steam / freon cycle, gas / air / freon cycle and chemically recuperated gas turbine have been investigated. The application of the overall assessment method helps to understand different and very expensi.
Download or read book Combined Cycle Systems for Near Zero Emission Power Generation written by Ashok D Rao and published by Elsevier. This book was released on 2012-04-12 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined cycle power plants are one of the most promising ways of improving fossil-fuel and biomass energy production. The combination of a gas and steam turbine working in tandem to produce power makes this type of plant highly efficient and allows for CO2 capture and sequestration before combustion. This book provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants. After introductory chapters on basic combined cycle power plant and advanced gas turbine design, the book reviews the main types of combined cycle system. Chapters discuss the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) and integrated gasification combined cycle (IGCC) as well as novel humid air cycle, oxy-combustion turbine cycle systems. The book also reviews pressurised fluidized bed combustion (PFBC), externally fired combined cycle (EFCC), hybrid fuel cell turbine (FC/GT), combined cycle and integrated solar combined cycle (ISCC) systems. The final chapter reviews techno-economic analysis of combined cycle systems. With its distinguished editor and international team of contributors, Combined cycle systems for near-zero emission power generation is a standard reference for both industry practitioners and academic researchers seeking to improve the efficiency and environmental impact of power plants. Provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants Introduces basic combined cycle power plant and advanced gas turbine design and reviews the main types of combined cycle systems Discusses the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) systems and integrated gasification combined cycle (IGCC) systems, as well as novel humid air cycle systems and oxy-combustion turbine cycle systems
Download or read book Biomass Gasification Pyrolysis and Torrefaction written by Prabir Basu and published by Academic Press. This book was released on 2018-06-29 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass Gasification, Pyrolysis and Torrefaction, Third Edition, is enhanced with a new topic on processing and cleaning of product gas of gasification and a brief introduction to biomaterials, making it a versatile resource that not only explains the basic principles of energy conversion systems, but also provides valuable insight into the design of a complete biomass conversion systems. With a dedicated focus on the design, analysis and operational aspects of biomass gasification, pyrolysis and torrefaction, this edition offers comprehensive coverage of biomass in its gas, liquid or solid states in a single accessible source. The author provides many worked design problems, step-by-step design procedures and real data on commercially operating systems. Although the book carries the name ‘biomass’, the bulk of its content is also applicable to non-biomass fuels like coal, petcoke, municipal solid waste and others. This book will help engineers, scientists and operating personnel of biomass gasification, pyrolysis or torrefaction plants, gain better comprehension of the basics of biomass conversion. Biomass Gasification, Pyrolysis and Torrefaction, Third Edition, is enhanced with a new topic on processing and cleaning of product gas of gasification and brief introduction to biomaterials making it a versatile resource that not only explains the basic principles of energy conversion systems, but also provides valuable insight into the design of a complete biomass conversion systems. With a dedicated focus on the design, analysis, and operational aspects of biomass gasification, pyrolysis, and torrefaction, this edition of the book offers comprehensive coverage of biomass in its gas, liquid, or solid states in a single easy-to-access source. The author provides many worked out design problems, step-by-step design procedures and real data on commercially operating systems. Although the book carries the name ‘biomass’, the bulk of its content is also applicable to non-biomass fuels like, coal, petcoke, municipal solid waste and others. This book will allow professionals, such as engineers, scientists, and operating personnel of biomass gasification, pyrolysis or torrefaction plants, to gain a better comprehension of the basics of biomass conversion. Features updates with the most recent research and technology Expanded to include a new chapter on syngas purification Contains step-by-step process flow diagrams, design data, conversion charts and numerical examples with solutions Provides available research results in an easy-to-use design methodology Examines the economic aspects of biomass conversion
Download or read book Biomass Gasification and Pyrolysis written by Prabir Basu and published by Academic Press. This book was released on 2010-07-19 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers comprehensive coverage of the design, analysis, and operational aspects of biomass gasification, the key technology enabling the production of biofuels from all viable sources--some examples being sugar cane and switchgrass. This versatile resource not only explains the basic principles of energy conversion systems, but also provides valuable insight into the design of biomass gasifiers. The author provides many worked out design problems, step-by-step design procedures and real data on commercially operating systems. After fossil fuels, biomass is the most widely used fuel in the world. Biomass resources show a considerable potential in the long term if residues are properly handled and dedicated energy crops are grown. Includes step-by-step design procedures and case studies for Biomass GasificationProvides worked process flow diagrams for gasifier design. Covers integration with other technologies (e.g. gas turbine, engine, fuel cells)
Download or read book Biomass in Small Scale Energy Applications written by Mateusz Szubel and published by CRC Press. This book was released on 2019-10-08 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass in Small-Scale Energy Applications: Theory and Practice presents the current trends in the development of selected biomass-based technologies for distributed energy generation. It describes the methodology, experimental results, and computer simulations with a focus on pilot systems and devices crucial in multiple applications with related environmental/economic issues. It describes which stages of design, development, and application of advanced biomass-based energy devices are critical in order for a given technology to be successful. It includes both technical/practical information and theoretical background related to combustion kinetics, thermodynamics in energy systems, and properties of selected types of biomass, as well as case studies.
Download or read book Introduction to Materials for Advanced Energy Systems written by Colin Tong and published by Springer. This book was released on 2018-12-12 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first of its kind text enables today’s students to understand current and future energy challenges, to acquire skills for selecting and using materials and manufacturing processes in the design of energy systems, and to develop a cross-functional approach to materials, mechanics, electronics and processes of energy production. While taking economic and regulatory aspects into account, this textbook provides a comprehensive introduction to the range of materials used for advanced energy systems, including fossil, nuclear, solar, bio, wind, geothermal, ocean and hydropower, hydrogen, and nuclear, as well as thermal energy storage and electrochemical storage in fuel cells. A separate chapter is devoted to emerging energy harvesting systems. Integrated coverage includes the application of scientific and engineering principles to materials that enable different types of energy systems. Properties, performance, modeling, fabrication, characterization and application of structural, functional and hybrid materials are described for each energy system. Readers will appreciate the complex relationships among materials selection, optimizing design, and component operating conditions in each energy system. Research and development trends of novel emerging materials for future hybrid energy systems are also considered. Each chapter is basically a self-contained unit, easily enabling instructors to adapt the book for coursework. This textbook is suitable for students in science and engineering who seek to obtain a comprehensive understanding of different energy processes, and how materials enable energy harvesting, conversion, and storage. In setting forth the latest advances and new frontiers of research, the text also serves as a comprehensive reference on energy materials for experienced materials scientists, engineers, and physicists. Includes pedagogical features such as in-depth side bars, worked-out and end-of- chapter exercises, and many references to further reading Provides comprehensive coverage of materials-based solutions for major and emerging energy systems Brings together diverse subject matter by integrating theory with engaging insights
Download or read book Energy from Biomass written by Peter Quaak and published by World Bank Publications. This book was released on 1999 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: While energy is essential for development, standard fossil fuels are often in short supply in countries where it is needed most. However, alternative fuel resources abound in the form of agricultural and municipal waste or "biomass." This report reviews the state of the art of biomass combustion and gassification systems, their advantages and disadvantages. It also encourages investment in use of these technologies to enable developing countries to better exploit their biomass resources and help close the gap between their energy needs and their energy supply.
Download or read book RESULTS OF THE TECHNICAL AND ECONOMIC FEASIBILITY ANALYSIS FOR A NOVEL BIOMASS GASIFICATION BASED POWER GENERATION SYSTEM FOR THE FOREST PRODUCTS INDUSTRY written by Joseph Rabovitser and published by . This book was released on 2003 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2001, the Gas Technology Institute (GTI) entered into Cooperative Agreement DE-FC26-01NT41108 with the U.S. Department of Energy (DOE) for an Agenda 2020 project to develop an advanced biomass gasification-based power generation system for near-term deployment in the Forest Products Industry (FPI). The advanced power system combines three advanced components, including biomass gasification, 3-stage stoker-fired combustion for biomass conversion, and externally recuperated gas turbines (ERGTs) for power generation. The primary performance goals for the advanced power system are to provide increased self-generated power production for the mill and to increase wastewood utilization while decreasing fossil fuel use. Additional goals are to reduce boiler NOx and CO{sub 2} emissions. The current study was conducted to determine the technical and economic feasibility of an Advanced Power Generation System capable of meeting these goals so that a capital investment decision can be made regarding its implementation at a paper mill demonstration site in DeRidder, LA. Preliminary designs and cost estimates were developed for all major equipment, boiler modifications and balance of plant requirements including all utilities required for the project. A three-step implementation plan was developed to reduce technology risk. The plant design was found to meet the primary objectives of the project for increased bark utilization, decreased fossil fuel use, and increased self-generated power in the mill. Bark utilization for the modified plant is significantly higher (90-130%) than current operation compared to the 50% design goal. For equivalent steam production, the total gas usage for the fully implemented plant is 29% lower than current operation. While the current average steam production from No. 2 Boiler is about 213,000 lb/h, the total steam production from the modified plant is 379,000 lb/h. This steam production increase will be accomplished at a grate heat release rate (GHRR) equal to the original boiler design. Boiler efficiencies (cogeneration-steam plus air) is increased from the original design value of 70% to 78.9% due to a combination of improved burnout, operation with lower excess air, and drier fuel. For the fully implemented plant, the thermal efficiency of fuel to electricity conversion is 79.8% in the cogeneration mode, 5% above the design goal. Finally, self-generated electricity will be increased from the 10.8 MW currently attributable to No. 2 Boiler to 46.7MW, an increase of 332%. Environmental benefits derived from the system include a reduction in NOx emissions from the boiler of about 30-50% (90-130 tons/year) through syngas reburning, improved carbon burnout and lower excess air. This does not count NOx reduction that may be associated with replacement of purchased electricity. The project would reduce CO{sub 2} emissions from the generation of electricity to meet the mill's power requirements, including 50,000 tons/yr from a net reduction in gas usage in the mill and an additional 410,000 tons/yr reduction in CO{sub 2} emissions due to a 34 MW reduction of purchased electricity. The total CO{sub 2} reduction amounts to about 33% of the CO{sub 2} currently generated to meet the mills electricity requirement. The overall conclusion of the study is that while significant engineering challenges are presented by the proposed system, they can be met with operationally acceptable and cost effective solutions. The benefits of the system can be realized in an economic manner, with a simple payback period on the order of 6 years. The results of the study are applicable to many paper mills in the U.S. firing woodwastes and other solid fuels for steam and power production.
Download or read book Biomass Gasification for Gas Turbine Based Power Generation written by Mark A. Paisley and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Orlando, FL, Jun 2-Jun 5, 1997.
Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies Reviews the current status and future developments of key technologies involved in IGCC plants Provides several case studies of existing IGCC plants around the world
Download or read book Technologies for Converting Biomass to Useful Energy written by Erik Dahlquist and published by CRC Press. This book was released on 2013-04-16 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Officially, the use of biomass for energy meets only 10-13% of the total global energy demand of 140 000 TWh per year. Still, thirty years ago the official figure was zero, as only traded biomass was included. While the actual production of biomass is in the range of 270 000 TWh per year, most of this is not used for energy purposes, and mostly it is not used very efficiently. Therefore, there is a need for new methods for converting biomass into refined products like chemicals, fuels, wood and paper products, heat, cooling and electric power. Obviously, some biomass is also used as food – our primary life necessity. The different types of conversion methods covered in this volume are biogas production, bio-ethanol production, torrefaction, pyrolysis, high temperature gasifi cation and combustion. This book covers the suitability of different methods for conversion of different types of biomass. Different versions of the conversion methods are presented – both existing methods and those being developed for the future. System optimization using modeling methods and simulation are analyzed to determine advantages and disadvantages of different solutions. Many international experts have contributed to provide an up-to-date view of the situation all over the world. These global perspectives and the inclusion of so much expertise of distinguished international researchers and professionals make this book unique. This book will prove useful and inspiring to professionals, engineers, researchers and students as well as to those working for different authorities and organizations.
Download or read book Power from Plants written by Walter C. Patterson and published by Royal Institute of International Affairs. This book was released on 1994 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
