Download or read book Vegetable Oil based Bio lubricants and Transformer Fluids written by Dhorali Gnanasekaran and published by Springer. This book was released on 2017-09-08 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses vegetable oil based biolubricants and their applications in the power distribution industry. Vegetable oil based lubricants offer significant advantages over petroleum-based lubricants, including biodegradability, cost-effectiveness, renewability, and lower environmental effects. This book provides a detailed literature survey of modified vegetable oils. It discusses the physical and chemical properties of vegetable oil, and their effects on its applications in tribology. The book discusses additives and enhancements to make vegetable oils suitable for use as lubricating oils and transformer oils in power plants and power distribution grids. The contents of the book will be useful to researchers and professionals as well as policy makers and standards agencies.
Download or read book Biolubricants Based on Vegetable Oils written by Sergio Nogales Delgado and published by Springer Nature. This book was released on with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biolubricants written by Jan C.J. Bart and published by Elsevier. This book was released on 2012-12-18 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricants are essential in engineering, however more sustainable formulations are needed to avoid adverse effects on the ecosystem. Bio-based lubricant formulations present a promising solution. Biolubricants: Science and technology is a comprehensive, interdisciplinary and timely review of this important subject.Initial chapters address the principles of lubrication, before systematically reviewing fossil and bio-based feedstock resources for biodegradable lubricants. Further chapters describe catalytic, (bio) chemical functionalisation processes for transformation of feedstocks into commercial products, product development, relevant legislation, life cycle assessment, major product groups and specific performance criteria in all major applications. Final chapters consider markets for biolubricants, issues to consider when selecting and using a lubricant, lubricant disposal and future trends.With its distinguished authors, Biolubricants: Science and technology is a comprehensive reference for an industrial audience of oil formulators and lubrication engineers, as well as researchers and academics with an interest in the subject. It provides an essential overview of scientific and technological developments enabling the cost-effective improvement of biolubricants, something that is crucial for the green future of the lubricant industry. - A comprehensive, interdisciplinary and timely review of bio-based lubricant formulations - Addresses the principles of lubrication - Reviews fossil and bio-based feedstock resources for biodegradable lubricants
Download or read book Tribology and Sustainability written by Jitendra Kumar Katiyar and published by CRC Press. This book was released on 2021-08-26 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology and Sustainability brings a vision of promoting a greener, cleaner and eco-friendly environment by highlighting sustainable solutions in tribology via the development of self-lubricating materials, green additives in lubricants, natural fibre-reinforced materials and biomimetic approaches. Backed by supporting schematic diagrams, data tables and illustrations for easy understanding, the book focuses on recent advancements in tribology and sustainability. Global sustainability and regional requirements are addressed through chapters on natural composites, green lubricants, biomedical systems and wind energy systems, with a dedicated chapter on a global sustainability scenario. FEATURES Highlights sustainability via new tribological approaches and how such methods are essential Covers the theoretical aspects of various tribological topics concerning mechanical and material designs for energy-efficient systems Includes practical global sustainability based on the regional requirements of tribological research and sustainable impact Reviews the tribology of green lubricants, green additives and lightweight materials Discusses topics related to biomimetics and biotribology Tribology and Sustainability will assist researchers, professionals and graduate students in tribology, surface engineering, mechanical design and materials engineering, including mechanical, aerospace, chemical and environmental engineering.
Download or read book Recent Advances in Sustainable Technologies written by Kanishka Jha and published by Springer Nature. This book was released on 2021-05-17 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advances in Sustainable Technologies (ICAST 2020), organized by Lovely Professional University, Punjab, India. The topics covered in this book are multidisciplinary in nature. The primary topics included in the book are from the domains of automobile engineering, mechatronics, material science and engineering, aerospace engineering, bio-mechanics, biomedical instrumentation, mathematical techniques, agricultural engineering, nuclear engineering, physics, biodynamic modelling and ergonomics etc. The contents of this book will be beneficial for beginners, researchers, and professionals alike.
Download or read book Biolubricants written by Yashvir Singh and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-05-20 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their biodegradability, renewability and superior lubrication performance compared to commercial fossil lubricants, vegetable oils are becoming substitutes for petroleum-based lubricants in different sectors, especially in the automotive industry. Biolubricants covers feedstocks, physicochemical properties, process to chemically alter raw oils from feedstocks, lubrication characteristics, as well as the additives to enhance properties.
Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Industrial Oil Crops written by Thomas McKeon and published by Elsevier. This book was released on 2016-02-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Oil Crops presents the latest information on important products derived from seed and other plant oils, their quality, the potential environmental benefit, and the latest trends in industrial uses. This book provides a comprehensive view of key oil crops that provide products used for fuel, surfactants, paints and coatings, lubricants, high-value polymers, safe plasticizers and numerous other products, all of which compete effectively with petroleum-derived products for quality and cost. Specific products derived from oil crops are a principle concern, and other fundamental aspects of developing oil crops for industrial uses are also covered. These include improvement through traditional breeding, and molecular, tissue culture and genetic engineering contributions to breeding, as well as practical aspects of what is needed to bring a new or altered crop to market. As such, this book provides a handbook for developing products from renewable resources that can replace those currently derived from petroleum. Led by an international team of expert editors, this book will be a valuable asset for those in product research and development as well as basic plant research related to oil crops. - Up-to-date review of all the key oilseed crops used primarily for industrial purposes - Highlights the potential for providing renewable resources to replace petroleum derived products - Comprehensive chapters on biodiesel and polymer chemistry of seed oil - Includes chapters on economics of new oilseed crops, emerging oilseed crops, genetic modification and plant tissue culture technology for oilseed improvement
Download or read book Green Chemistry and Green Materials from Plant Oils and Natural Acids written by Zengshe Liu and published by Royal Society of Chemistry. This book was released on 2023-12-22 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing awareness that materials and chemicals produced from fossil fuels are not sustainable, both in terms of the pollution caused by the extraction and production processes, and the fact that there is only a finite supply of these fossil fuels. Therefore, there is a strong incentive to find sources for chemicals and materials from source materials that we know we can continue to generate. Plants are a source of a wide variety of chemicals, many with interesting properties, and these chemical feedstocks are considered renewable rather than finite. Green Chemistry and Green Materials from Plant Oils and Natural Acids covers the application of these natural materials in producing polymers, lubricants and plasticisers.
Download or read book Environmentally Friendly and Biobased Lubricants written by Brajendra K. Sharma and published by CRC Press. This book was released on 2016-09-19 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Review of Developing Environmentally Friendly Lubricants A push from environmentally savvy consumers along with recent changes in governmental regulations have paved the way for a marketplace of products with high levels of environmental performance. Fueled by the growing demand for biobased lubricants, Environmentally Friendly and Biobased Lubricants highlights the development of environmentally friendly additives that are compatible with environmental regulations and describes the approaches being used in this emerging area. Derived from research topics shared over the years at various technical sessions of the Society of Tribologists and Lubrication Engineers (STLE) Annual Meetings, the book includes a critical assessment of gaps and weaknesses in the field of environmentally friendly fluids and biobased lubricants. Each chapter is written by authors selected from the environmentally friendly fluids and biobased lubricants sessions of STLE and also incorporates input from prominent researchers invited to take part in the book. Expert contributors discuss the control, production, usage, and disposal of lubricants; factor in related policies, laws, and regulations around the world; and include case studies demonstrating the uses and values of commercially viable biobased lubricants. The book is divided into five sections that cover advanced environmentally friendly base oils and feedstocks, biobased hydraulic lubricants and biodegradability, chemically/enzymatically modified environmentally friendly base oils, vegetable oil–based environmentally friendly fluids, and additives for environmentally friendly fluids.
Download or read book Lubrication in Inland and Coastal Water Activities written by P van Broekhuizen and published by CRC Press. This book was released on 2003-01-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is strongly recommended to those engaged in activities involving the lubrication of machines, to lubricant manufacturers and to raw material producers. It brings together the experience of many companies, institutions and individual users in a variety of European countries. These user groups have monitored the effect of applying biolubricants to their equipment. Lubrication in Inland and Coastal Water Activities describes the various products available and gives an overview of the technical and environmental aspects of biolubricants. Attention is given to the range of biolubricants, their application and the importance of including all stakeholders in developing their use: from the lubricant manufacturers to the equipment manufacturers, from local users to governmental authorities. Lubrication in Inland and Coastal Water Activities is a valuable contribution towards the development of a responsible lubricant policy.
Download or read book Synthetics Mineral Oils and Bio Based Lubricants written by Leslie R. Rudnick and published by CRC Press. This book was released on 2005-12-22 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field of tribology has evolved, the lubrication industry is also progressing at an extraordinary rate. Updating the author's bestselling publication, Synthetic Lubricants and High-Performance Functional Fluids, this book features the contributions of over 60 specialists, ten new chapters, and a new title to reflect the evolving nature of the
Download or read book Sustainable Bio Based Composites written by Arbind Prasad and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-09-02 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sustainability of any process lies in the eco-friendly and economical production of products for applications. Bio-based materials are emerging as raw materials for different products and applications. The book covers cellulose, chitosan, silk, collagen and gelatin bio-based materials. It describes their use in biomedical applications, such as orthopaedic implant, drug delivery, tissue culture, biosensor and engineering applications such as fuel cells, energy storage and packaging. It concludes with the use of bio-based materials as precursors for biorefinery, biolubricants, membranes and adsorbents.
Download or read book Mitigating Environmental Impact of Petroleum Lubricants written by Ignatio Madanhire and published by Springer. This book was released on 2016-06-09 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores effective environmental impact mitigation for petroleum-based lubricants to reduce their negative persistence during usage and upon end-of-life disposal. The book reviews the basic tribology of lubricants as well as initiatives that may enhance the environmental and economic effectiveness of lubricating oils from the composition design perspective across industries. Considering the blending, application, and disposal of petroleum lubricants in a holistic manner, the book presents and extends current best practices that minimize or eliminate adverse environmental impact throughout the product’s life cycle. The book reviews methods including: raw material substitution, minimizing oil losses during and after manufacturing, raw material and energy consumption reduction, and environmentally friendly applications of oil disposal as ways forward for cleaner and more effective production. This book provides readers with strategies for incorporating cleaner production practices into their operations – a benefit to both environmental legal compliance and business competitiveness – all the while preserving the environment for sustainable development. The book is therefore of interest to both manufacturers and consumers in the lubricants industry.
Download or read book Biorefinery of Oil Producing Plants for Value Added Products written by Suraini Abd-Aziz and published by John Wiley & Sons. This book was released on 2021-12-21 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biorefinery of Oil Producing Plants for Value-Added Products An instructive and up-to-date pretreatment and industrial applications of oil producing plants Biorefinery of Oil Producing Plants for Value-Added Products is a two-volume set that delivers a comprehensive exploration of oil producing plants, from their availability to their pretreatment, bioenergy generation, chemical generation, bioproduct generation, and economic impact. The distinguished team of editors has included a wide variety of highly instructive resources written by leading contributors to the field. This set explores the current and future potential of bioenergy production to address the energy and climate crisis, as well as the technologies used to produce materials like biogas, biodiesel, bioethanol, biobutanol, biochar, fuel pellets, and biohydrogen. It also discusses the production of biobased chemicals, including bio-oil, biosurfactants, catanionic surfactants, glycerol, biovanillin, bioplastic, and plant-oil based polyurethanes. Concluding with an insightful analysis of the economic effects of oil producing plants, the set also offers readers: A thorough introduction to the availability of oil producing plants, including palm oil, castor oil, jatropha, nyamplung, and coconut A comprehensive exploration of the pretreatment of oil producing plants, including the physical, chemical and biological pretreatment of lignocellulosic biomass Practical discussion of the generation of bioenergy, including biogas generation in the palm oil mill and biodiesel production techniques using jatropha In-depth examinations of the generation of biobased chemicals, including those produced from the tobacco plant Perfect for researchers and industry practitioners involved with the biorefinery of oil producing plants, Biorefinery of Oil Producing Plants for Value-Added Products also belongs in the libraries of undergraduate and graduate students studying agriculture, chemistry, engineering, and microbiology.
Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.
Download or read book Nanolubricants written by Mohd Yusuf and published by John Wiley & Sons. This book was released on 2024-04-10 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: NANOLUBRICANTS Through the dissemination of the latest advancements in nanolubrication science, this volume addresses the pressing concerns surrounding their economic feasibility, environmental acceptability, sustainability, and overall viability. Lubrication is the lifeblood of machinery and the key to its smooth operation. In the world of mechanics and engineering, the role of lubricants cannot be overstated. They are the unsung heroes that reduce friction between surfaces in contact, thus preventing excessive heat generation during motion. Beyond this primary function, lubricants find their application in diverse areas, including power transmission, foreign object transportation, and the regulation of surface temperature. In recent times, the world has shifted towards sustainable and environmentally-friendly practices, prompting a transition from conventional lubricants to more efficient and eco-conscious alternatives. Among these emerging solutions, nanolubricants have emerged as formidable contenders, reshaping the landscape of lubrication technology. Their adoption not only promises enhanced performance but also carries the added benefit of environmental responsibility through biodegradability. This book delves into the multifaceted realm of nanolubricants, exploring their characterization and application across various domains. From vegetable oil-based lubricants to those incorporating metal and non-metal oxide components, this comprehensive work encompasses nine meticulously curated chapters. A particular focus is placed on the intriguing synergy between nano-dimensionality and the incorporation of metals and metal oxides into vegetable oil-based biodegradable lubricants. The book explores the environmental advantages, progress, and challenges associated with this innovative approach. Furthermore, it delves into the integration of functionalized nanostructured semi-metal-based compounds as lubricant additives in non-edible vegetable oils, paving the way for improved tribological properties. Audience The book is extremely important to industrial practitioners working in mechanical engineering, tribology, wear, tear, friction and lubrication behavior of machinery. Researchers in nanoscience, nanotechnology, materials science, and sustainability subjects, will find this book useful.
