Download or read book Bioinspired Superhydrophobic Nano and Microstructured Surfaces for Drag Reduction and Optoelectronics written by Felix Vüllers and published by KIT Scientific Publishing. This book was released on 2018-08-30 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inspired by superhydrophobic leaves of water plants, a flexible superhydrophobic self-cleaning, transparent thin polymeric nanofur film was fabricated through highly scalable hot embossing and hot pulling techniques. Nanofur can retain an air film underwater, whose stability against external stimuli such as high pressure and movement through fluids is investigated. Additionally, the optical properties of nanofur are investigated and exploited to enhance the efficiency of optoelectronic devices.
Download or read book Bioinspired Superhydrophobic Nano and Microstructured Surfaces for Drag Reduction and Optoelectronics written by Felix Vüllers and published by . This book was released on 2020-10-09 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inspired by superhydrophobic leaves of water plants, a flexible superhydrophobic self-cleaning, transparent thin polymeric nanofur film was fabricated through highly scalable hot embossing and hot pulling techniques. Nanofur can retain an air film underwater, whose stability against external stimuli such as high pressure and movement through fluids is investigated. Additionally, the optical properties of nanofur are investigated and exploited to enhance the efficiency of optoelectronic devices. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
Download or read book NMR micro detectors tailored for multinuclear and electrochemistry lab on a chip applications written by Davoodi, Hossein and published by KIT Scientific Publishing. This book was released on 2022-01-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers three solutions tailored to specific applications to overcome NMR challenges in the micro-domain. As the first sub-topic of this work, different potential electrode designs, compatible with NMR technique, are suggested and experimentally evaluated. As the second focus point, this work tackles multinuclear detection challenges. In parallel, a low-cost, broadband insert is discussed to enhance the sensitivity of standard NMR coils when a small sample volume is available.
Download or read book Innovative micro NMR MRI functionality utilizing flexible electronics and control systems written by Nassar, Omar and published by KIT Scientific Publishing. This book was released on 2023-08-15 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages offered by the flexible electronics and control systems technologies were utilized for tackling the challenges facing two crucial Magnetic Resonance (MR) applications. The first application is in the field of interventional Magnetic Resonance Imaging (MRI), and the other application is in the field of Nuclear Magnetic Resonance spectroscopy (NMR).
Download or read book Photon upconversion heterostructures made from surface anchored metal organic frameworks written by Oldenburg, Michael and published by KIT Scientific Publishing. This book was released on 2019-01-22 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Situ Characterization and Modelling of Drying Dynamics for Scalable Printing of Hybrid Perovskite Photovoltaics written by Ternes, Simon and published by KIT Scientific Publishing. This book was released on 2023-03-27 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid perovskite photovoltaics could play a vital role in future’s renewable energy production. However, there are still severe challenges when scaling the technology. In this work, perovskite solution films drying in laminar and slot-jet air flows are investigated extensively by optical in situ characterization. The main results are a quantitative model of perovskite drying dynamics and a novel in situ imaging technique – yielding valuable predictions for large-scale perovskite fabrication.
Download or read book Power Generation by Resonant Self Actuation written by Joseph, Joel and published by KIT Scientific Publishing. This book was released on 2023-12-28 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Forschung im Bereich der Mikro-Energiegewinnungssysteme wurde durch den Bedarf an autarken, stabilen Energiequellen für vernetzte drahtlose Sensoren vorangetrieben. Abwärme, insbesondere bei Temperaturen unter 200 °C, stellt eine vielversprechende, aber mit den derzeitigen Umwandlungstechnologien schwer zu gewinnende Energiequelle dar. - Research into micro energy harvesting systems has been driven by the need for self-sustaining, stable power sources for interconnected wireless sensors. Waste heat, particularly at temperatures below 200 °C, presents a promising but challenging energy source to recover using current conversion technology.
Download or read book Bioinspired Superhydrophobic Surfaces written by Frédéric Guittard and published by CRC Press. This book was released on 2017-10-06 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials with superhydrophobic or related properties are one of the most studied subjects from a theoretical point of view and also for the large range of possible applications, for example, anticorrosion, antibacteria, optical devices, and sensors. The study of natural species with special wettability has shown us the importance of surface structures and the surface energy of the resulting surface properties. Various strategies can be used to reproduce superhydrophobic phenomena in the laboratory. General reviews on superhydrophobic properties already exist but, to our knowledge, do not focus on metallic and inorganic materials. Here, we focus especially on the strategies implemented for reaching superhydrophobic or related properties using metallic and inorganic materials. Indeed, these materials present unique properties, for example, thermal and mechanical resistance, chemical and ageing resistance, and optical (transparency, antireflection, photoluminescence) and electrical properties (conducting, semiconducting, insulating). This book will be useful for graduate students of materials chemistry and physics and for researchers in surface science, nanostructures, and bioinspired or biomimetic materials.
Download or read book Superhydrophobic Surfaces written by Mehdi Khodaei and published by . This book was released on 2020 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, the superhydrophobic surfaces, bio-inspired non-wettable surfaces, have aroused worldwide interest. The super water-repellant surface has special characteristics such as low surface energy as well as hierarchical micro/nano surface roughness. These surfaces have many practical applications, from industrial to biomedical applications, including water/oil separation, self-cleaning, drag reduction, anti-fogging, anti-bacterial, anti-fouling, anti-icing, corrosion resistance, as well as many applications in industries such as marine, oil, and gas, aerospace, biomedicine etc. This book presents knowledge on the field of application of superhydrophobic surfaces. Superhydrophobicity has become a hot topic in the academics as well as industries in different engineering and biomedicine research fields.
Download or read book Superhydrophobic Surfaces written by Mehdi Khodaei and published by . This book was released on 2020 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, the superhydrophobic surfaces, bio-inspired non-wettable surfaces, have aroused worldwide interest. The super water-repellant surface has special characteristics such as low surface energy as well as hierarchical micro/nano surface roughness. These surfaces have many practical applications, from industrial to biomedical applications, including water/oil separation, self-cleaning, drag reduction, anti-fogging, anti-bacterial, anti-fouling, anti-icing, corrosion resistance, as well as many applications in industries such as marine, oil, and gas, aerospace, biomedicine etc. This book presents knowledge on the field of application of superhydrophobic surfaces. Superhydrophobicity has become a hot topic in the academics as well as industries in different engineering and biomedicine research fields.
Download or read book Superhydrophobic Surfaces written by Mehdi Khodaei and published by . This book was released on 2020-07 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wetting and Wettability written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2015-12-16 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the liquid 's surface, the molecules have fewer neighbors in comparison with the bulk volume. As a result, the energy interaction shows itself in the surface tension. Traditionally, the surface tension can be assumed as a force in the unit of the length which can be counted by the unit of Newton on squared meter, or energy on the units of the surface. The surface tension, implies the interface between liquid and vapor, which is an example of the surface tensions. The equilibrium between these surface tensions, decides that a droplet on a solid surface, would have a droplet form or will change to layer form. This book collects new developments in wetting and wettability science.
Download or read book Superhydrophobic Surfaces written by Russell J. Crawford and published by Elsevier. This book was released on 2015-02-19 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superhydrophobic Surfaces analyzes the fundamental concepts of superhydrophobicity and gives insight into the design of superhydrophobic surfaces. The book serves as a reference for the manufacturing of materials with superior water-repellency, self-cleaning, anti-icing and corrosion resistance. It thoroughly discusses many types of hydrophobic surfaces such as natural superhydrophobic surfaces, superhydrophobic polymers, metallic superhydrophobic surfaces, biological interfaces, and advanced/hybrid superhydrophobic surfaces. Provides an adequate blend of complex engineering concepts with in-depth explanations of biological principles guiding the advancement of these technologies Describes complex ideas in simple scientific language, avoiding overcomplicated equations and discipline-specific jargon Includes practical information for manufacturing superhydrophobic surfaces Written by experts with complementary skills and diverse scientific backgrounds in engineering, microbiology and surface sciences
Download or read book Stimuli Responsive Dewetting Wetting Smart Surfaces and Interfaces written by Atsushi Hozumi and published by Springer. This book was released on 2018-11-16 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superhydrophobic surfaces, artificially mimicking lotus leaves, have captured the attention of scientists and engineers over the past few decades. Recent trends have shifted from superhydrophobicity to superominipohobicity, or superamphiphobicity. In addition, dynamic rather than static surface wetting/dewetting properties, which can be triggered by various stimuli, including temperature, pH, magnetic/electric fields, solvents, light exposure etc, have been highly sought after for commercial applications. This book will focus on recent topics related to various stimuli-responsive wetting/dewetting surfaces, and give an overview of the knowledge and concepts of how to design and establish these smart artificial surfaces, which can be used for technical developments in a wide variety research fields.
Download or read book Advanced Coating Materials written by Liang Li and published by John Wiley & Sons. This book was released on 2018-11-19 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the recent advances in coating materials and their novel applications at the cross-section of advanced materials both current and next-generation. Advanced Coatings Materials contains chapters covering the latest research on polymers, carbon resins, and high-temperature materials used for coatings, adhesives, and varnishes today. Concise chapters describe the development, chemical and physical properties, synthesis and polymerization, commercial uses, and other characteristics for each raw material and coating detailed. A comprehensive, yet practical source of reference, this book provides an excellent foundation for comparing the properties and performance of coatings and selecting the most suitable materials based on specific service needs and environmental factors.
Download or read book Polymers Coatings written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-05-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The explores the cutting-edge technology of polymer coatings. It discusses fundamentals, fabrication strategies, characterization techniques, and allied applications in fields such as corrosion, food, pharmaceutical, biomedical systems and electronics. It also discusses a few new innovative self-healing, antimicrobial and superhydrophobic polymer coatings. Current industrial applications and possible potential activities are also discussed.
Download or read book Proceedings of the 2nd International Conference on Advanced Surface Enhancement INCASE 2021 written by Yuefan Wei and published by Springer Nature. This book was released on 2021-08-21 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the ‘2nd International Conference on Advanced Surface Enhancement’, INCASE 2021. It comprehensively reviews the state-of-the-arts in surface engineering related techniques and strategies, towards industrialization. The topics include ‘Advances in Surface Engineering’, ‘Surface and sub-surface Characterisation’, ‘Surface Coatings’ and ‘Modeling and Simulation’. With the opportunities and challenges discussed, this book identifies the gaps between research and manufacturing. The innovative ideas presented promote technology adoption in industry, for the future of manufacturing.
