Download or read book Bioimplants Manufacturing written by Abhilash P M and published by CRC Press. This book was released on 2024-09-04 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text covers fundamentals and technological advancements in processing, post-processing, and surface engineering of bioimplant materials. It further discusses important topics such as the additive manufacturing of bioimplants, the tribological performance of bioimplants, and the hybrid and non-traditional manufacturing of bioimplants materials. The text also presents the latest advancements in intelligent bioimplant manufacturing using artificial intelligence and machine learning. This book: Offers an in-depth understanding of the fundamentals, types, materials and applications of bioimplants Highlights the effect of processing on microstructure, biocompatibility, and mechanical behavior of bioimplants Investigates the surface modification methods and tribological performance of bioimplants Discusses additive manufacturing and non-traditional manufacturing techniques such as electrical discharge machining and electrochemical machining of bioimplants materials Covers smart technologies such as artificial intelligence and machine learning-based intelligent implant manufacturing for Industry 4.0 It is primarily written for senior undergraduate and graduate students and academic researchers in the fields of mechanical engineering, biomedical engineering, production engineering, industrial engineering, aerospace engineering, and manufacturing engineering.
Download or read book ADDITIVE MANUFACTURING OF BIO IMPLANTS written by and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Role of Surface Modification on Bacterial Adhesion of Bio implant Materials written by Santhosh Kumar S and published by CRC Press. This book was released on 2020-08-09 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Role of Surface Modification on Bacterial Adhesion of Bio-implant Materials: Machining, Characterization, and Applications, explores the relationship between the surface roughness of artificial implants used for hard tissue replacement and their bacterial adhesion. It summarizes the reason for the failure of implants, the mechanisms of bacterial formation on implant surfaces, and the fundamental and established methods of implant surface modification techniques. It provides readers with an organized and rational representation about implant manufacturing and mechanical surface modification. It also explores the use of developed unidirectional abrasive flow finishing processes to finish biomaterials at the nano-level. It is an invaluable guide for academics, graduate students, biomaterial scientists, and manufacturing engineers researching implants, related infections, and implant manufacturing. Key Features: Explores implant related infections Discusses surface modification techniques Contains information on the mechanical finishing processes and complete guide on developed cutting edge unidirectional abrasive flow finishing technology
Download or read book Biomedical Implants written by Ravi K. Dwivedi and published by CRC Press. This book was released on 2024-02-14 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the development of implants, from the selection of materials to the outcome of the process. It covers various steps, including biocompatible material, synthesis, and characterization, compatibility and limitations of materials, specific implants, and finite element analysis of medical implants. It also presents a comparison between predictions and experimental results by studying real-world problems and addresses the issue of sustainability in implant manufacturing, process modeling, and optimization in additive manufacturing supported by case studies. Features: • Covers the development of implants from the selection of material to the suitable process of manufacturing technologies. • Includes biocompatible material, synthesis, characterization, compatibility, and limitations of materials. • Reviews biofabrication in terms of artificial organs and soft tissues. • Discusses implant manufacturing, including additive and micro-manufacturing and failure analysis through case studies. • Addresses the issue of sustainability in implant manufacturing. This book is intended for researchers and graduate students specializing in mechanical, biomedical, healthcare engineering, biomaterials, and additive manufacturing.
Download or read book Virtual Prototyping Bio Manufacturing in Medical Applications written by Bopaya Bidanda and published by Springer Nature. This book was released on 2020-10-21 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The original role of RP was to confirm the shape and feel of concept design, but innovations in RP now allow for the development of sophisticated medical devices such as catheters, stents, drug delivery systems, syringes and cardio-vascular devices, and more. RP has moved beyond medical devices, as surgeons now regularly use RP models to brainstorm strategies for surgeries. This book presents new uses for rapid prototyping in state-of-the-art medical applications.
Download or read book Biomanufacturing written by Chander Prakash and published by Springer. This book was released on 2019-03-20 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Trends in Biomanufacturing focuses on cutting-edge research regarding the design, fabrication, assembly, and measurement of bio-elements into structures, devices, and systems. The field of biomaterial and biomanufacturing is growing exponentially in order to meet the increasing demands of for artificial joints, organs and bone-fixation devices. Rapid advances in the biological sciences and engineering are leading to newer and viable resources, methods and techniques that may providing better quality of life and more affordable health care services. The book covers the broad aspects of biomanufacturing, including: synthesis of biomaterials; implant coating techniques; spark plasma sintering; microwave processing; and cladding, powder metallurgy and electrospinning. The contributors illustrate the recent trends of biomanufacturing, highlighting the important aspects of biomaterial synthesis, and their use as feedstock of fabrication technologies and their characterization, along with their clinical practices. Current Trends in Biomanufacturing updates researchers and scientists the novelties and techniques of the field, as it summarises numerous aspects of biomanufacturing, including synthesis of biomaterials, fabrication of biomedical structures, their in-vivo/ in-vitro, mechanical analysis and associated ISO standards.
Download or read book Laser based Technologies for Sustainable Manufacturing written by Avinash Kumar and published by CRC Press. This book was released on 2023-07-26 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides scientific and technological insights on novel techniques of design and manufacturing using laser technologies. It showcases applications of laser micromachining in the biomedical industry, laser-based manufacturing processes in aerospace engineering, and high-precision laser-cutting in the home appliance sector. Features: Each chapter discusses a specific engineering problem and showcases its numerical, and experimental solution Provides scientific and technological insights on novel routes of design and manufacturing using laser technologies Synergizes exploration related to the various properties and functionalities through extensive theoretical and numerical modeling Highlights current issues, developments, and constraints in additive manufacturing Discusses applications of laser cutting machines in the manufacturing industry and laser micromachining for the biomedical industry The text discusses optical, and laser-based green manufacturing technologies and their application in diverse engineering fields including mechanical, electrical, biomedical, and computer. It further covers sustainability issues in laser-based manufacturing technologies and the development of laser-based ultra-precision manufacturing techniques. The text also discusses the use of artificial intelligence and machine learning in laser-based manufacturing techniques. It will serve as an ideal reference text for senior undergraduate, graduate students, and researchers in fields including mechanical engineering, aerospace engineering, manufacturing engineering, and production engineering.
Download or read book Nanoscale Engineering of Biomaterials Properties and Applications written by Lalit M. Pandey and published by Springer Nature. This book was released on 2022-02-16 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest advances in a wide range of biomaterials for the development of smart and advanced functional materials. It discusses the fundamentals of bio-interfacial interactions and the surface engineering of emerging biomaterials like metals and alloys, polymers, ceramics, and composites/nanocomposites. In turn, the book addresses the latest techniques and approaches to engineering material surfaces/interfaces in, e.g., implants, tissue engineering, drug delivery, antifouling, and dentistry. Lastly, it summarizes various challenges in the design and development of novel biomaterials. Given its scope, it offers a valuable source of information for students, academics, physicians and particularly researchers from diverse disciplines such as material science and engineering, polymer engineering, biotechnology, bioengineering, chemistry, chemical engineering, nanotechnology, and biomedical engineering for various commercial and scientific applications.
Download or read book Advanced Materials Processing and Manufacturing Processes written by Shankar Sehgal and published by Trans Tech Publications Ltd. This book was released on 2022-09-28 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed extended articles based on abstracts presented at the International Conference on Applied Research and Engineering (ICARAE2021) Aggregated Book
Download or read book Biomaterials and Their Applications written by Hamid Reza Rezaie and published by Springer. This book was released on 2015-04-30 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: This short book presents an overview of different types of biomaterial such as bio ceramics, bio polymers, metals and bio composites, while especially focusing on nano biomaterials and their applications in different tissues. It provides a compact introduction to nano materials for drug delivery systems, tissue engineering and implants, while also reviewing essential trends in the biomaterial field over the last few decades and the latest developments.
Download or read book Proceedings of the 7th International Conference on Nanomanufacturing nanoMan2021 written by Shuming Yang and published by Springer Nature. This book was released on 2022-04-15 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 7th International Conference on Nanomanufacturing (nanoMan2021), held in Xi’an on November 17-19, 2021 after postponing twice due to COVID-19 pandemic. It encompasses the synthesis of nanomaterials, the fabrication of devices, the characterization of various products and systems, process monitoring and quality control, simulations, and the applications of nanoscience and nanotechnologies.
Download or read book Advances in Additive Manufacturing written by Ajay Kumar and published by Elsevier. This book was released on 2022-11-24 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book is a compilation of scholarly articles on the latest developments in the field of additive manufacturing, discussing nature-inspired and artificial intelligence–aided additive manufactured processes for different materials including biomanufacturing, and their applications, as well as various methods to enhance the characteristics of the materials produced, the efficiency of the manufacturing process itself, as well as optimal ways to develop a product in minimum time. The book explores the advancements in additive manufacturing from prefabrication stage to final product, with real-time defect detection, control, and process efficiency improvement covered. This book will be a great resource for engineers, researchers, and academics involved in this revolutionary and unique field of manufacturing. Discusses modeling of additive manufacturing processes by artificial intelligence Looks at the optimization of designs, technologies, and material fabrication and the use of simulation in additive manufacturing Includes case studies and real-world industrial problems and solutions
Download or read book Advances in Manufacturing Technology XXXII written by P. Thorvald and published by IOS Press. This book was released on 2018-08-29 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: The urgent need to keep pace with the accelerating globalization of manufacturing in the 21st century has produced rapid advancements in technology, research and innovation. This book presents the proceedings of the 16th International Conference on Manufacturing Research incorporating the 33nd National Conference on Manufacturing Research (ICMR 2018), held in Skövde, Sweden, in September 2018. The aim of the conference is to create a friendly and inclusive environment, bringing together researchers, academics and industrialists with practical and theoretical knowledge to share and discuss emerging trends and new challenges. The book is divided into 12 parts, covering areas such as the manufacturing process; robots; product design and development; smart manufacturing; and lean, among others. Covering both cutting-edge research and recent industrial applications, the book will appeal to all those with an interest in recent advances in manufacturing technology.
Download or read book 3D Printing in Biomedical Engineering written by Sunpreet Singh and published by Springer Nature. This book was released on 2020-07-16 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of the rapidly evolving field of three-dimensional (3D) printing, and its increasing applications in the biomedical domain. 3D printing has distinct advantages like improved quality, cost-effectiveness, and higher efficiency compared to traditional manufacturing processes. Besides these advantages, current challenges and opportunities regarding choice of material, design, and efficiency are addressed in the book. Individual chapters also focus on select areas of applications such as surgical guides, tissue regeneration, artificial scaffolds and implants, and drug delivery and release. This book will be a valuable source of information for researchers and professionals interested in the expanding biomedical applications of 3D printing.
Download or read book Design Development and Optimization of Bio Mechatronic Engineering Products written by Kumar, Kaushik and published by IGI Global. This book was released on 2019-03-15 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomechanical engineering is involved with creating and producing a variety of products in everyday use, from environmentally safe plastics to various foods, fabrics, and medicines. A combination of engineering and biology, it is a fast-growing field with many new and exciting opportunities in genetic engineering and biotechnology. However, research surrounding biomechanical applications is scattered and often restricted, leading to the need for a comprehensive publication of the recent advances and developments in this emerging field. Design, Development, and Optimization of Bio-Mechatronic Engineering Products provides pivotal research on the application of combining mechanical engineering with human biological systems in order to develop bio-mechatronic products like pacemakers, artificial kidney replacements, artificial hearts, and new joints or limbs to better and more accurately monitor and advance human health. While highlighting topics such as orthotic devices, inter-electrode gap, and biomaterial applications, this publication explores producing artificial material to work in sync with the human body. This book is ideally designed for engineers, health professionals, technology developers, researchers, academicians, and students.
Download or read book Biofabrication written by Gabor Forgacs and published by William Andrew. This book was released on 2013-03-18 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biofabrication is a practical guide to the novel, inherently cross-disciplinary scientific field that focuses on biomanufacturing processes and a related range of emerging technologies. These processes and technologies ultimately further the development of products that may involve living (cells and/or tissues) and nonliving (bio-supportive proteins, scaffolds) components. The book introduces readers to cell printing, patterning, assembling, 3D scaffold fabrication, cell/tissue-on-chips as a coherent micro-/nano-fabrication toolkit. Real-world examples illustrate how to apply biofabrication techniques in areas such as regenerative medicine, pharmaceuticals and tissue engineering. In addition to being a vital reference for scientists, engineers and technicians seeking to apply biofabrication techniques, this book also provides an insight into future developments in the field, and potential new applications. Discover the multi-disciplinary toolkit provided by biofabrication and apply it to develop new products, techniques and therapies Covers a range of important emerging technologies in a coherent manner: cell printing, patterning, assembling, 3D scaffold fabrication, cell/tissue-on-chips... Readers develop the ability to apply biofabrication technologies through practical examples
Download or read book Proceedings of the International Conference on Industrial and Manufacturing Systems CIMS 2020 written by Ravi Pratap Singh and published by Springer Nature. This book was released on 2021-07-24 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to deal with the societal challenges novel technology plays an important role. For the advancement of technology, Department of Industrial and Production Engineering under the aegis of NIT Jalandhar is organizing an “International Conference on Industrial and Manufacturing Systems” (CIMS-2020) from 26th -28th June, 2020. The present conference aims at providing a leading forum for sharing original research contributions and real-world developments in the field of Industrial and Manufacturing Systems so as to contribute its share for technological advancements. This volume encloses various manuscripts having its roots in the core of industrial and production engineering. Globalization provides all around development and this development is impossible without technological contributions. CIMS-2020, gathered the spirits of various academicians, researchers, scientists and practitioners, answering the vivid issues related to optimisation in the various problems of industrial and manufacturing systems.