Download or read book Biodegradation of All In One Self Etching Adhesive Systems at Resin Dentin Interf Age written by Sirichan Chiaraputt and published by . This book was released on 2010 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Self Etching Adhesives written by Ahmed Ahmed Laithy Hassan and published by LAP Lambert Academic Publishing. This book was released on 2011-01 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present investigation was performed to evaluate the effect of acid pretreatment, bonding condition (wet or dry dentin) and the application technique (single application or double application)on resin/dentin bond strength and the morphology of the resin/dentin interface using two self-etching adhesive systems. The results showed that the type of the adhesive had a significant effect on the resin/dentin shear bond strength, followed by dentin condition.
Download or read book Bonding to Dentin with Conventional One step and Self etching Adhesive Systems written by Pascal Gysi and published by . This book was released on 2000 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: Le but de cette étude était de comparer les valeurs d'adhérence à la dentine obtenue avec 8 systèmes adhésifs de catégories différentes. Les interfaces d'adhérence ont été testées en microtension à l'aide d'une machine Vitrodyne V-1000. Le système Scotchbond Multipurpose Plus (30.3±9.3 MPa) a présenté des résultats supérieurs à ceux de l'Optibond FL (22.4±4.3 MPa), du Scotchbond 1 (18.9±3.2 MPa), du Prime and Bond NT (18.3±6.9 MPa), du Clearfil Liner Bond 2 V (18.9±3.0 MPa), de l'Asba S.A.C (14.0±2.9 MPa), de l'Excite (13.8±3.7 MPa) et du Prompt L-Pop (9.0±3.4 MPa). Les observations au MEB ont mis en évidence une grande majorité de fractures de type adhésif. Il a été démontré que les systèmes adhésifs conventionnels ont présenté de meilleurs résultats que les systèmes mono-composants bien qu'un des systèmes auto-mordançants ait obtenu des résultats comparables à ces derniers.
Download or read book Etch and Rinse and Self Etch Adhesives Behavior on Dentin written by João Cardoso Ferreira and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybridization is a key phenomenon in bonding resin-based composite restorations to dentin, and results from a molecular-level interaction between the resin and the demineralized collagen fibrils network. Nanoleakage occurs when small molecules or ions infiltrate into the hybrid layer. Our work aims to evaluate if the type of solvent and adhesive system influences the morphology of the hybrid layer and the occurrence of nanoleakage within it. Human molar teeth were distributed into six groups corresponding to adhesives with different solvents (ScotchbondTM 1XT, XP BondTM, Prime&Bond® NT, One Coat Bond®, AdheSE® and Xeno® V). Dentin disks (specimens) were cut from those teeth. The corresponding adhesive systems and a microhybrid composite (Synergy® D6) were applied onto them. The specimens were thermocycled, fixed, cut, polished, decalcified, dried, and, for nanoleakage evaluation, immersed into a tracer solution. The morphology and nanoleakage analyses were performed with a high-resolution scanning electron microscope (field-emission scanning electron microscope-FESEM), and the results were statistically processed. AdheSE® achieved the overall best performance. The type of adhesive, the number of steps, and the solvent seem to play a significant role in hybrid layer morphology and nanoleakage within it. The hybrid layer water absorption can determine the adhesion longevity.
Download or read book Bond Strengh of One step Self etch Adhesives Systems in Pulp Dentin Complex written by Mohd Haidil Akmal Bin Mahdan and published by . This book was released on 2014 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dental Hard Tissues and Bonding written by George Eliades and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews bonding to enamel, dentin and cementum and analyses relevant adhesion mechanisms. It is addressed to both the dental researcher and the clinician. Emphasis is placed on the characterization of material interfaces with dental tissues in situ. The volume also stresses the importance of appropriate experimental protocol design in facilitating clinically-relevant research methods, clarifies the mechanisms of adhesion of polymeric materials to hard dental tissues and furnishes a handy reference for routine clinical procedures in restorative and prosthetic dentistry as well as orthodontics. The book introduces important aspects of the chemistry of dental materials and their adaptation to dental hard tissues. It also analyses interfacial phenomena occurring during application of materials, including mechanical properties, and structural-compositional alterations. The text presents the current instrumental approaches in studying related issues and a summary of the current status of theories concerning bonding to dental tissues. This work, in its scope and scientific content, provides an in-depth view of the way in which aesthetic dentistry is currently being practiced.
Download or read book Dental Composite Materials for Direct Restorations written by Vesna Miletic and published by Springer. This book was released on 2017-11-25 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both basic scientific and clinically relevant aspects of dental composite materials with a view to meeting the needs of researchers and practitioners. Following an introduction on their development, the composition of contemporary composites is analyzed. A chapter on polymerization explains the setting reactions and light sources available for light-cured composites. The quality of monomer-to-polymer conversion is a key factor for material properties. Polymerization shrinkage along with the associated stress remains among the most challenging issues regarding composite restorations. A new classification of dental composites is proposed to offer more clinically relevant ways of differentiating between commercially available materials. A review of specific types of composites provides an insight into their key issues. The potential biological issues of dental composites are reviewed in chapters on elution of leachable substances and cariogenicity of resin monomers. Clinical sections focus on material placement, finishing procedures, and the esthetics and clinical longevity of composite restorations. Bonding to tooth tissues is addressed in a separate chapter, as is the efficiency of various composite repair methods. The final chapter discusses future perspectives on dental composite materials.
Download or read book Adhesives written by Anna Rudawska and published by BoD – Books on Demand. This book was released on 2016-11-23 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some information regarding adhesives which have applications in industry, medicine and dentistry. The book is divided into two parts: "Adhesives Applications in Medicine and Dentistry" and "Properties of Adhesive." The aim of such a presentation is to present the usage in very different aspects of application of the adhesives and present specific properties of adhesives. Adhesives' advantageous properties and relatively uncomplicated processing methods contribute to their increasing application and their growing popularity in the industry, medicine and other branches. Some adhesives represent properties superior to those of most adhesive materials, due to their excellent adhesion and chemical resistance. A wide variety of adhesives' considerable flexibility in modification of properties of adhesives allows adjusting the composition to particular applications.
Download or read book The Glossary of Prosthodontic Terms written by and published by . This book was released on 1994 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Restoration of Root Canal Treated Teeth written by Jorge Perdigão and published by Springer. This book was released on 2015-10-02 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive and up-to-date overview of the restoration of teeth retained through root canal treatment, from the perspective of adhesive dentistry. The challenge of adhesion to root dentin is first explained and guidance provided on assessment of the restorability of endodontically treated teeth. The types of prefabricated passive post are then described in detail. The advantages and disadvantages of each type are outlined, with identification of the factors that influence post selection. Further topics include the ferrule effect, evidence‐based clinical applications of fiber posts and new methods to lute fiber posts to the root canal without dentin adhesives. In addition, frequent myths are identified and dispelled. All aspects are illustrated with clinical and laboratory images, diagrams and high-resolution electron microscopy photographs.
Download or read book Developing Bioactive Materials for Dental Applications written by Mary Anne Sampaio Melo and published by Frontiers Media SA. This book was released on 2021-10-01 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dental Biomaterials written by R V Curtis and published by Elsevier. This book was released on 2014-01-23 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dental Biomaterials: Imaging, Testing and Modelling reviews the materials used in this important area, their performance and how such performance can be measured and optimised. Chapters review optical and electron microscopy imaging techniques for dental biomaterial interfaces. Specific materials such as dental cements, fibre-reinforced composites, metals and alloys are discussed. There is an analysis of stresses, fracture, wear and ageing in dental biomaterials as well as an evaluation of the performance of dental adhesives and resin-dentin bonds. Chapters also review ways of assessing the performance of dental handpieces, crowns, implants and prosthesies. The book also reviews the use of computer models in such areas as bond strength and shape optimisation of dental restorations.With its distinguished editors and team of experienced contributors DDental Biomaterials: Imaging, Testing and Modelling researchers, materials scientists, engineers and dental practitioners with an essential guide to the use and performance of dental biomaterials. - An essential guide to the use and performance of dental biomaterials - Reviews optical and electron microscopy imaging techniques for dental biomaterial interfaces - Analyses stresses, fracture, wear and ageing in dental biomaterials and evaluates the performance of dental adhesives and resin-dentin bonds
Download or read book Hybridization of Dental Hard Tissues written by Nobuo Nakabayashi and published by Quintessence Publishing (IL). This book was released on 1998 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Evolution of Dentin-Resin Bonding. -- 2. Properties of Dentin. -- 3. Acidic Conditioning and Hybridization of Substrates. -- 4. Characterization of the Hybrid Layer. -- 5. The Quality of the Hybridized Dentin. -- 6. Clinical Applications of Hybrid Layer Formation.
Download or read book Orthodontic Materials written by Wiliam A. Brantley and published by Thieme. This book was released on 2011-01-01 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this important new textbook all scientific and clinical aspects of orthodontic materials are described.Recent developments in science and technology have led to the introduction of a plethora of new orthodontic products. This work serves as an excellent source of information for a field that requires knowledge of basic elements of materials science, engineering, chemistry, and physics, as well as clinical orthodontics. The subject has been part of graduate orthodontic education for almost three decades. Besides servicing the orthodontic training programs, the book also - investigates the interactions of orthodontic materials with other dental materials as well as hard tissues in the oral cavity,- gives a background to allow for proper material selection for efficient orthodontic mechanics,- treats the issues of biocompatibility, cytotoxicity and mutagenicity of materials.
Download or read book The Anatomy of the Root canals of the Teeth of the Permanent Dentition written by Walter Hess and published by . This book was released on 1925 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wurzelkanal / Anatomie
Download or read book Dental Materials and Their Selection written by William Joseph O'Brien and published by Quintessence Publishing (IL). This book was released on 1997 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. A Comparison of Metals, Ceramics, and Polymers. -- 2. Physical Properties. -- 3. Color and Appearance. -- 4. Surface Phenomena and Adhesion to Tooth Structure. -- 5. Gypsum Products. -- 6. Polymers and Polymerizations: Denture Base Polymers. -- 7. Polymeric Restorative Materials: Composites and Sealants. -- 8. Abrasion, Polishing, and Bleaching. -- 9. Impression Materials. -- 10. Waxes. -- 11. Dental Cements. -- 12. Structure and Properties of Metals and Alloys. -- 13. Dental Amalgams. -- 14. Direct Gold Filling Materials. -- 15. Precious Metal Casting Alloys. -- 16. Alloys for Porcelain-Fused-to-Metal Restorations. -- 17. Casting. -- 18. High-Temperature Investments. -- 19. Base Metal Casting Alloys. -- 20. Orthodontic Wires. -- 21. Dental Porcelain. -- 22. Soldering, Welding, and Electroplating. -- 23. Dental Implant Materials.
Download or read book Biocompatibility of Dental Materials written by Gottfried Schmalz and published by Springer Science & Business Media. This book was released on 2008-10-10 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and scientifically based overview of the biocompatibility of dental materials. Up-to-date concepts of biocompatibility assessment are presented, as well as information on almost all material groups used in daily dentistry practice. Furthermore, special topics of clinical relevance (e.g,, environmental and occupational hazards and the diagnosis of adverse effects) are covered. The book will: improve the reader’s ability to critically analyze information provided by manufacturers supply a better understanding of the biocompatibility of single material groups, which will help the reader choose the most appropriate materials for any given patient and thus prevent adverse effects from developing provide insights on how to conduct objective, matter-of-fact discussions with patients about the materials to be used in dental procedures advise readers, through the use of well-documented concepts, on how to treat patients who claim adverse effects from dental materials feature clinical photographs that will serve as a reference when analyzing clinical symptoms, such as oral mucosa reactions.
