Download or read book Bio based Wood Adhesives written by Zhongqi He and published by CRC Press. This book was released on 2017-05-25 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive bonding plays an increasing role in the forest product industry and is a key factor for efficiently utilizing timber and other lignocellulosic resources. As synthetic wood adhesives are mostly derived from depleting petrochemical resources and have caused increasing environmental concern, natural product and byproduct-derived adhesives have attracted much attention in the last decades. Although adhesives made from plant and animal sources have been in existence since ancient times, increased knowledge of their chemistry and improved technical formulation of their preparation are still needed to promote their broader industrial applications. The primary goals of this book are to (1) synthesize the fundamental knowledge and latest research on bio-based adhesives from a remarkable range of natural products and byproducts, (2) identify need areas and provide directions of future bio-based adhesive research, and (3) help integrating research findings in practical adhesive application for maximal benefits. This book covers information on a variety of natural products and byproducts and the latest research on formulation, testing and improvement of the relevant adhesives in fifteen chapters written by an international group of accomplished contributors. This book will serve as a valuable reference source for university faculty, graduate students, research scientists, agricultural and wood engineers, international organization advocators and government agency regulators who work and deal with enhanced utilization of agricultural and forest products and byproducts.

Download or read book Bio based Wood Adhesives written by Zhongqi He and published by CRC Press. This book was released on 2017-05-25 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive bonding plays an increasing role in the forest product industry and is a key factor for efficiently utilizing timber and other lignocellulosic resources. As synthetic wood adhesives are mostly derived from depleting petrochemical resources and have caused increasing environmental concern, natural product and byproduct-derived adhesives have attracted much attention in the last decades. Although adhesives made from plant and animal sources have been in existence since ancient times, increased knowledge of their chemistry and improved technical formulation of their preparation are still needed to promote their broader industrial applications. The primary goals of this book are to (1) synthesize the fundamental knowledge and latest research on bio-based adhesives from a remarkable range of natural products and byproducts, (2) identify need areas and provide directions of future bio-based adhesive research, and (3) help integrating research findings in practical adhesive application for maximal benefits. This book covers information on a variety of natural products and byproducts and the latest research on formulation, testing and improvement of the relevant adhesives in fifteen chapters written by an international group of accomplished contributors. This book will serve as a valuable reference source for university faculty, graduate students, research scientists, agricultural and wood engineers, international organization advocators and government agency regulators who work and deal with enhanced utilization of agricultural and forest products and byproducts.

Download or read book Green Adhesives written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-06-03 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Adhesives: Preparation, Properties and Applications deals with the fabrication methods, characterization, and applications of green adhesives. It also includes the collective properties of waterborne, bio, and wound-healing green adhesives. Exclusive attention is devoted to discussing the applications of green adhesives in biomedical coatings, food, and industrial applications.

Download or read book Eco Friendly Adhesives for Wood and Natural Fiber Composites written by Mohammad Jawaid and published by Springer Nature. This book was released on 2021-01-21 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of eco-friendly resins and their composite materials covering their synthesis, sources, structures and properties for different industrial applications to support the ongoing research and development in eco-friendly and renewable commercial products. It provides comparative discussions on the properties of eco-friendly resins with other polymer composites. It is a useful reference on bio-based eco-friendly polymer resins, wood-based composites, natural fibers and biomass materials for the polymer scientists, engineers and material scientists.

Download or read book Biobased Adhesives written by Manfred Dunky and published by John Wiley & Sons. This book was released on 2023-04-27 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biobased Adhesives Unique and comprehensive book edited by acknowledged leaders on biobased adhesives that will replace petroleum-based adhesives. This book contains 23 chapters covering the various ramifications of biobased adhesives. The chapters are written by world-class scientists and technologists actively involved in the arena of biobased adhesives. The book is divided into three parts: Part 1: Fundamental Aspects; Part 2: Classes of Biobased Adhesives; and Part 3: Applications of Biobased Adhesives. Topics covered include: an introduction to biobased adhesives; adhesion theories and adhesion and surface issues with biobased adhesives; chemistry of adhesives; biorefinery products as biobased raw materials for adhesives; naturally aldehyde-based thermosetting resins; natural crosslinkers; curing and adhesive bond strength development in biobased adhesives; mimicking nature; bio-inspired adhesives; protein adhesives; carbohydrates as adhesives; natural polymer-based adhesives; epoxy adhesives from natural materials; biobased polyurethane adhesives; nanocellulose-modified adhesives; debondable, recyclable, and biodegradable biobased adhesives; 5-Hydroxymethylfurfural-based adhesives; adhesive precursors from tree-derived naval stores; and applications in various diverse arenas such as wood bonding, controlled drug delivery, and wearable bioelectronics. Audience This book will interest materials scientists, adhesionists, polymer chemists, marine biologists, food and agriculture scientists, and environmentalists. R&D personnel in a slew of wide-ranging industries such as aviation, shipbuilding, railway, automotive, packaging, construction, wood bonding, and composites should find this book a repository of current and much-needed information.

Download or read book Handbook of Wood Chemistry and Wood Composites written by Roger M. Rowell and published by CRC Press. This book was released on 2005-02-18 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The degradable nature of high-performance, wood-based materials is an attractive advantage when considering environmental factors such as sustainability, recycling, and energy/resource conservation. The Handbook of Wood Chemistry and Wood Composites provides an excellent guide to the latest concepts and technologies in wood chemistry and bio-based composites. The book analyzes the chemical composition and physical properties of wood cellulose and its response to natural processes of degradation. It describes safe and effective chemical modifications to strengthen wood against biological, chemical, and mechanical degradation without using toxic, leachable, or corrosive chemicals. Expert researchers provide insightful analyses of the types of chemical modifications applied to polymer cell walls in wood, emphasizing the mechanisms of reaction involved and resulting changes in performance properties. These include modifications that increase water repellency, fire retardancy, and resistance to ultraviolet light, heat, moisture, mold, and other biological organisms. The text also explores modifications that increase mechanical strength, such as lumen fill, monomer polymer penetration, and plasticization. The Handbook of Wood Chemistry and Wood Composites concludes with the latest applications, such as adhesives, geotextiles, and sorbents, and future trends in the use of wood-based composites in terms of sustainable agriculture, biodegradability and recycling, and economics. Incorporating over 30 years of teaching experience, the esteemed editor of this handbook is well-attuned to educational demands as well as industry standards and research trends.

Download or read book Wood Adhesives written by Antonio Pizzi and published by CRC Press. This book was released on 2011-01-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood adhesives are of tremendous industrial importance, as more than two-thirds of wood products in the world today are completely or partially bonded together using a variety of adhesives. Adhesive bonding offers many advantages over other joining methods for wood components, and there has been a great deal of R& D activity in devising new wood adhesives or improving the existing ones. The modern mantra in all industrial sectors is: "think green, go green," which has attracted much attention in the wood adhesive industry. Therefore, there is also a lot of research activity in synthesizing environmentally benign and human-friendly wood adhesives. This book is divided into four parts: Part 1: Fundamental Adhesion Aspects in Wood Bonding; Part 2: Synthetic Adhesives; Part 3: Environment-friendly adhesives; and Part 4: Wood Welding and General Paper. It addresses many different types of wood adhesives, as well as bonding (welding) of wood components without adhesives, a more recent development. The information contained in this book is valuable for individuals engaged in all aspects of wood adhesion and adhesives and, hopefully, will inspire new ideas in wood adhesives, a topic of vital industrial importance.

Download or read book Progress in Adhesion and Adhesives Volume 6 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the voluminous research being published, it is difficult, if not impossible, to stay abreast of current developments in a given area. The review articles in this book consolidate information to provide an alternative way to follow the latest research activity and developments in adhesion science and adhesives. With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. The 19 chapters in this Volume 6 follow the same order as the review articles originally published in RAA in the year 2020 and up to June 2021. The subjects of these 19 chapters fall in the following areas: Adhesives and adhesive joints Contact angle Reinforced polymer composites Bioadhesives Icephobic coatings Adhesives based on natural resources Polymer surface modification Superhydrophobic surfaces The topics covered include: hot-melt adhesives; adhesively-bonded spar-wingskin joints; contact angle hysteresis; fiber/matrix adhesion in reinforced thermoplastic composites; bioadhesives in biomedical applications; mucoadhesive pellets for drug delivery applications; bio-inspired icephobic coatings; wood adhesives based on natural resources; adhesion in biocomposites; vacuum UV surface photo-oxidation of polymers and other materials; vitrimers and their relevance to adhesives; superhydrophobic surfaces by microtexturing; structural acrylic adhesives; mechanically durable water-repellent surfaces; mussel-inspired underwater adhesives; and cold atmospheric pressure plasma technology for modifying polymers. Audience This book will be valuable and useful to researchers and technologists in materials science, nanotechnology, physics, surface and colloid chemistry in multiple disciplines in academia, industry, various research institutes and other organizations.

Download or read book Biopolymers and Biotech Admixtures for Eco Efficient Construction Materials written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2016-01-11 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1930 more than 100,000 new chemical compounds have been developed and insufficient information exists on the health assessment of 95 percent of these chemicals in which a relevant percentage are used in construction products. For instance Portland cement concrete, the most used material on the Planet (10.000 million tons/year that in the next 40 years will increase around 100 %) currently used in around 15% of total concrete production contains chemicals used to modify their properties, either in the fresh or hardened state. Biopolymers are materials that are developed from natural resources. They reduce dependence on fossil fuels and reduce carbon dioxide emissions. There is a worldwide demand to replace petroleum-based materials with renewable resources. Currently bio-admixtures represent just a small fraction of the chemical admixtures market (around 20%) but with environmental awareness for constituents in construction materials generally growing (the Construction Products Regulation is being enforced in Europe since 2013), the trend towards bio-admixtures is expected to continue. This book provides an updated state-of-the-art review on biopolymers and their influence and use as admixtures in the development of eco-efficient construction materials. Provides essential knowledge for researchers and producers working on the development of biopolymer-modified construction materials Discusses the various types of biopolymers currently available, their different production techniques, their use as bio-admixtures in concretes and mortars and applications in other areas of civil engineering such as soil stability, wood preservation, adhesives and coatings All contributions are made from leading researchers, who have intensive involvement in the design and use of biopolymers in construction materials

Download or read book Handbook of Adhesion Technology written by Lucas F. M. da Silva and published by Springer. This book was released on 2011-08-10 with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesives have been used for thousands of years, but until 100 years ago, the vast majority was from natural products such as bones, skins, fish, milk, and plants. Since about 1900, adhesives based on synthetic polymers have been introduced, and today, there are many industrial uses of adhesives and sealants. It is difficult to imagine a product—in the home, in industry, in transportation, or anywhere else for that matter—that does not use adhesives or sealants in some manner. The Handbook of Adhesion Technology is intended to be the definitive reference in the field of adhesion. Essential information is provided for all those concerned with the adhesion phenomenon. Adhesion is a phenomenon of interest in diverse scientific disciplines and of importance in a wide range of technologies. Therefore, this handbook includes the background science (physics, chemistry and materials science), engineering aspects of adhesion and industry specific applications. It is arranged in a user-friendly format with ten main sections: theory of adhesion, surface treatments, adhesive and sealant materials, testing of adhesive properties, joint design, durability, manufacture, quality control, applications and emerging areas. Each section contains about five chapters written by internationally renowned authors who are authorities in their fields. This book is intended to be a reference for people needing a quick, but authoritative, description of topics in the field of adhesion and the practical use of adhesives and sealants. Scientists and engineers of many different backgrounds who need to have an understanding of various aspects of adhesion technology will find it highly valuable. These will include those working in research or design, as well as others involved with marketing services. Graduate students in materials, processes and manufacturing will also want to consult it.

Download or read book Green Chemistry for Surface Coatings Inks and Adhesives written by Rainer Höfer and published by Royal Society of Chemistry. This book was released on 2019-06-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many modern surface coatings and adhesives are derived from fossil feedstocks. With fossil fuels becoming more polluting and expensive to extract as supplies dwindle, industry is turning increasingly to nature, mimicking natural solutions using renewable raw materials and employing new technologies. Highlighting sustainable technologies and applications of renewable raw materials within the framework of green and sustainable chemistry, circular economy and resource efficiency, this book provides a cradle-to-cradle perspective. From potential feedstocks to recycling/reuse opportunities and the de-manufacture of adhesives and solvents, green chemistry principles are applied to all aspects of surface coating, printing, adhesive and sealant manufacture. This book is ideal for students, researchers and industrialists working in green sustainable chemistry, industrial coatings, adhesives, inks and printing technologies.

Download or read book Recent Advances in Adhesion Science and Technology in Honor of Dr Kash Mittal written by Wojciech (Voytek) Gutowski and published by CRC Press. This book was released on 2013-12-31 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of an object is the first thing we see or touch. Nearly every article or object we encounter at home, in industry, land transportation, aerospace, or the medical field in some way uses an adhesive, a sealant, or a decorative coating. Adhesion science provides the technology and the know-how behind these applications. Recent Advances in

Download or read book Handbook of Adhesive Technology Revised and Expanded written by Antonio Pizzi and published by CRC Press. This book was released on 2003-08-06 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Adhesive Technology, Second Edition exceeds the ambition of its bestselling forerunner by reexamining the mechanisms driving adhesion, categories of adhesives, techniques for bond formation and evaluation, and major industrial applications. Integrating modern technological innovations into adhesive preparation and application, this greatly expanded and updated edition comprises a total of 26 different adhesive groupings, including three new classes. The second edition features ten new chapters, a 40-page list of resources on adhesives, and abundant figures, tables, equations.

Download or read book Adhesives from Renewable Resources written by Richard W. Hemingway and published by . This book was released on 1989 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an up-to-date source of information from the leading world authorities on the use of lignins, tannins, carbohydrates, terpenes and proteins in adhesive formulations. Examines new alternatives based on the renewable resources that are available. Covers a broad range of natural products directed to a wide variety of bonding applications, from tire cords to eye surgery. Also addresses opportunities for future development of adhesives from renewable resources.

Download or read book Recent Advances in Polyphenol Research Volume 3 written by Véronique Cheynier and published by John Wiley & Sons. This book was released on 2012-02-21 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant polyphenols are secondary metabolites that constitute one of the most common and widespread groups of natural products. They express a large and diverse panel of biological activities including beneficial effects on both plants and humans. Many polyphenols, from their structurally simplest representatives to their oligo/polymeric versions (also referred to as vegetable tannins) are notably known as phytoestrogens, plant pigments, potent antioxidants, and protein interacting agents. Sponsored by Groupe Polyphénols, this publication, which is the third volume in this highly regarded Recent Advances in Polyphenol Research series, is edited by Véronique Cheynier, Pascale Sarni-Manchado, and Stéphane Quideau (the current President of Groupe Polyphénols). Like their predecessors, they have once again put together an impressive collection of cutting-edge chapters written by expert scientists internationally respected in their respective field of polyphenol sciences. This Volume 3 provides the latest information and opinion on the following major research topics about polyphenols: Organic chemistry and physical chemistry Biosynthesis, genetics and metabolic engineering The role of polyphenols in plants and ecosystems Health and nutrition Analysis and metabolomics Chemists, biochemists, plant scientists, pharmacognosists and pharmacologists, biologists, ecologists, food scientists and nutritionists will all find this book an invaluable resource. Libraries in all universities and research institutions where these disciplines are studied and taught should have copies on their bookshelves.

Download or read book Natural Polyphenols from Wood written by Kun Cheng and published by Elsevier. This book was released on 2021-03-24 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Polyphenols from Wood: Tannin and Lignin – An Industrial Perspective is a detailed guide to the sourcing and processing of tannin and lignin for valuable advanced applications across areas such as fuels, chemicals, drugs, and food. Drawing on the latest academic research and patent literature, this book provides strong practical understanding of the use of these valuable materials in novel industrial applications. This book introduces natural polyphenols from wood and the fundamental aspects of carbon management within the tree. In-depth presentation of extraction and characterization methods is followed by an extensive coverage of practical and industrial applications of wood polyphenols. This is an essential resource for researchers and advanced students working with lignin or tannin, and across biopolymer science, biomass, wood chemistry, paper, wood adhesives, polymer materials, renewable resources, and biotechnology. It also supports industrial R&D and scientists working with wood polyphenols or bio-based polymers. This book re-evaluates wood polyphenols from an industrial perspective, revealing the latest techniques and drawing on patent literature. It addresses fundamental issues of wood polyphenols, such as carbon cycle, wood fractionation, structure, and properties. It offers a comprehensive review of practical applications, including lignin depolymerization, wood reconstruction, fuels, chemicals, drugs, and food.

Download or read book Adhesives written by Anna Rudawska and published by BoD – Books on Demand. This book was released on 2016-11-23 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some information regarding adhesives which have applications in industry, medicine and dentistry. The book is divided into two parts: "Adhesives Applications in Medicine and Dentistry" and "Properties of Adhesive." The aim of such a presentation is to present the usage in very different aspects of application of the adhesives and present specific properties of adhesives. Adhesives' advantageous properties and relatively uncomplicated processing methods contribute to their increasing application and their growing popularity in the industry, medicine and other branches. Some adhesives represent properties superior to those of most adhesive materials, due to their excellent adhesion and chemical resistance. A wide variety of adhesives' considerable flexibility in modification of properties of adhesives allows adjusting the composition to particular applications.