Download or read book Biaxial Fatigue of Metals written by Jaap Schijve and published by Springer. This book was released on 2015-08-25 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems of fatigue under multiaxial fatigue loads have been addressed in a very large number of research publications. The present publication is primarily a survey of biaxial fatigue under constant amplitude loading on metal specimens. It starts with the physical understanding of the fatigue phenomenon under biaxial fatigue loads. Various types of proportional and non-proportional biaxial fatigue loads and biaxial stress distributions in a material are specified. Attention is paid to the fatigue limit, crack nucleation, initial micro crack growth and subsequent macro-crack in different modes of crack growth. The interference between the upper and lower surfaces of a fatigue crack is discussed. Possibilities for predictions of biaxial fatigue properties are analysed with reference to the similarity concept. The significance of the present understanding for structural design problems is considered. The book is completed with a summary of major observations.
Download or read book Biaxial Multiaxial Fatigue and Fracture written by Andrea Carpinteri and published by Elsevier. This book was released on 2003-03-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.
Download or read book Biaxial and Multiaxial Fatigue EGF 3 written by M. W. Brown and published by . This book was released on 1989 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 36 paper spresented in this volume were presented at the second international conference on biaxial/multiaxial fatigue.
Download or read book Advances in Multiaxial Fatigue written by David L. McDowell and published by ASTM International. This book was released on 1993 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the ASTM Symposium on Multiaxial Fatigue, held in San Diego, November 1991, to communicate the most recent international advances in multiaxial cyclic deformation and fatigue research as well as applications to component analysis and design. The 24 papers are grouped into five ca
Download or read book Fatigue and Fracture Mechanics written by Kenneth L. Jerina and published by ASTM International. This book was released on 2000 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Cycle Fatigue written by Harvey D. Solomon and published by ASTM International. This book was released on 1988 with total page 1289 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermomechanical fatigue behavior of materials written by Michael J. Verrilli and published by ASTM International. This book was released on 1996 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biaxial Wheel Fatigue Test written by Biaxial Wheel-Hub Fatigue Lab Test Task Force and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles. The appendix provides a scaleable load file that is applicable to ballasted passenger cars. Load files for unballasted passenger cars and light trucks will be added to this document.
Download or read book Multiaxial Fatigue and Fracture written by E. Macha and published by Elsevier. This book was released on 1999-09-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 18 papers selected from 90 presented at the Fifth International Conference on Biaxial/Multiaxial Fatigue and Fracture held in Cracow, Poland 8-12 September 1997. The papers in this book deal with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. The papers are divided into the following four categories: 1. Proportional cyclic loading 2. Non-proportional cyclic loading 3. Variable amplitude and random loading 4. Crack growth Most papers in this publication talk about the behaviour of constructional materials and elements of machines under non-proportional loading and under variable amplitude and random loading, which are more realistic load histories met in industrial practice. Variable amplitude loading under cyclic load with basic frequency and random loading under load with a continuous band of frequency is classified here. This book gives a review of the latest world success and directions of investigations on multiaxial fatigue and fracture. More and more often publications are results of the co-operation of researchers from different laboratories and countries. Seven out of eighteen papers included here were worked out by international authors teams. This is a symptom of the times, when science and investigations know no borders.
Download or read book Multiaxial Fatigue and Deformation written by Sreeramesh Kalluri and published by ASTM International. This book was released on 2000 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from a May 1999 symposium, describing state-of-the-art multiaxial testing techniques and analytical methods for characterizing fatigue and deformation behaviors of engineering materials. Papers are classified into sections on multiaxial strength of materials, multiaxial deformation,
Download or read book Multiaxial Fatigue written by Keith John Miller and published by ASTM International. This book was released on 1985 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Life Prediction of Composites and Composite Structures written by Anastasios P. Vassilopoulos and published by Elsevier. This book was released on 2010-07-27 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of composites is growing in structural applications in many industries including aerospace, marine, wind turbine and civil engineering. There are uncertainties about the long term performance of these composites and how they will perform under cyclic fatigue loading. Fatigue life prediction of composites and composite structures provides a comprehensive review of fatigue damage and fatigue life prediction methodologies for composites and how they can be used in practice. After an introductory chapter, Part one reviews developments in ways of modelling composite fatigue life. The second part of the book reviews developments in predicting composite fatigue life under different conditions including constant and variable amplitude loading as well as multiaxial and cyclic loading. Part three then describes applications such as fatigue life prediction of bonded joints and wind turbine rotor blades as well as health monitoring of composite structures. With its distinguished editor and international team of contributors, Fatigue life prediction of composites and composite structures is a standard reference for industry and researchers working with composites and those concerned with the long-term performance and fatigue life of composite components and structures. Examines past, present and future trends associated with fatigue life prediction of composite materials and structures Assesses novel computational methods for fatigue life modelling and prediction of composite materials under constant amplitude loading Specific chapters investigate fatigue life prediction of wind turbine rotor blades and bonded joints in composite structures
Download or read book Multiaxial Fatigue written by Darrell Socie and published by SAE International. This book was released on 1999-12-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.
Download or read book Al Alloy 2024 T4 Cumulative Biaxial Fatigue under Complex Loading written by Wael Abdulmajeed and published by GRIN Verlag. This book was released on 2013-04-22 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 1997 in the subject Engineering - Mechanical Engineering, , language: English, abstract: A study of metal cumulative fatigue damage at multilevel stress programs using 2024- T 4 AI -Alloy is carried out in this investigation. Specimens are designed and fabricated. The tests are performed under multiaxial fatigue in phase combined loading bending and torsion, with zero mean stress (R=-l) at room temperature. Five groups of multiaxial fatigue experiments are performed, constant amplitude, linear increasing and decreasing, Low-High loading sequence, High-Low loading sequence and equivalent flight loading fatigue. Prediction of life specimens are studied at three methods: Palmgren-Miner, Corten - Dolan, and Marsh. The methods are conservative to some specimens and non-conservative to another. The effects of stage life (ns) have been examined and fatigue life of specimens are decreased when the stage life is decreased. Comparisons between High-Low & Low-High loading sequences in fatigue life (multi stress level) have been investigated. The Low-High loading sequence is less dangerous than High-Low loading sequence at the same stress range (equal loading stages). Studies the effect of stress range fatigue life have been investigated and the fatigue life is decreased with increasing the stress range fatigue (having the same lowest stress). For the fatigue of equivalent flight loading, the life is depend basically on stress range and the cruising interval this two parameters have been studied.
Download or read book Fatigue Under Biaxial and Multiaxial Loading ESIS Publication 10 written by K. F. Kussmaul and published by Wiley-Blackwell. This book was released on 1991 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers from a conference which focuses on problems in biaxial and multiaxial fatigue research and the application of adequate design criteria to engineering solutions.
Download or read book Creep and Fatigue in Polymer Matrix Composites written by Rui Miranda Guedes and published by Woodhead Publishing. This book was released on 2019-03-14 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and Fatigue in Polymer Matrix Composites, Second Edition, updates the latest research in modeling and predicting creep and fatigue in polymer matrix composites. The first part of the book reviews the modeling of viscoelastic and viscoplastic behavior as a way of predicting performance and service life. Final sections discuss techniques for modeling creep rupture and failure and how to test and predict long-term creep and fatigue in polymer matrix composites. Reviews the latest research in modeling and predicting creep and fatigue in polymer matrix composites Puts a specific focus on viscoelastic and viscoplastic modeling Features the time-temperature-age superposition principle for predicting long-term response Examines the creep rupture and damage interaction, with a particular focus on time-dependent failure criteria for the lifetime prediction of polymer matrix composite structures that are illustrated using experimental cases
Download or read book Fatigue under Thermal and Mechanical Loading Mechanisms Mechanics and Modelling written by J. Bressers and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.
