Download or read book Biased Technical Change and Economic Conservation Laws written by Ryuzo Sato and published by Springer Science & Business Media. This book was released on 2006-06-01 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Productivity of inputs is an important determinant of the competitiveness of firms in national and international markets. Productivity growth arises from deliberate decisions to innovate but the technological opportunities could be such that different inputs would have different rates of growth. Previous literature has mostly concentrated on labor productivity but empirical studies indicate that productivity of capital is also increasing. One of the objectives of this book is to examine the difference or bias in the productivity growth of the two inputs. In this book, application of this general approach to study of biased technical change is developed and new empirical results presented for both macroeconomies and microeconomic firms.
Download or read book Biased Technical Change and Economic Conservation Laws written by RyÕuzÕo SatÕo and published by . This book was released on 2006 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal aim of BIASED TECHNICAL CHANGE AND ECONOMIC CONSERVATION LAWS is twofold: to reveal the new economic significance of the old concept of biased technical change and the current application of the new concept of economic conservation laws. Although terms such as "labor saving" and "capital saving" fall under the category of biased technical change, the first of these topics, no model exists in which biased technical change gives rise endogenously to technical progress. A special feature of this book is its thorough investigation and analysis of these issues, which go far beyond existing studies in this area. The concept of economic conservation laws dates back to Ramsey{u2019}s classic study of 1928. This book primarily makes use of Lie groups to shed new light on the analysis of economic conservation laws. Economic conservation laws are not simply abstract concepts; this book shows that they are tools of empirical analysis that can be applied to such topics as analyses of macro performance and corporate efficiency.
Download or read book Symmetry and Economic Invariance written by Ryuzo Sato and published by Springer Science & Business Media. This book was released on 2013-12-09 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symmetry and Economic Invariance (second enhanced edition) explores how the symmetry and invariance of economic models can provide insights into their properties. Although the professional economist of today is adept at many of the mathematical techniques used in static and dynamic optimization models, group theory is still not among his or her repertoire of tools. The authors aim to show that group theoretic methods form a natural extension of the techniques commonly used in economics and that they can be easily mastered. Part I provides an introduction that minimizes prerequisites including prior knowledge of group theory. Part II discusses recent developments in the field.
Download or read book Technological Change and the Environment written by Arnulf Grübler and published by Routledge. This book was released on 2010-09-30 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much is written in the popular literature about the current pace of technological change. But do we have enough scientific knowledge about the sources and management of innovation to properly inform policymaking in technology dependent domains such as energy and the environment? While it is agreed that technological change does not 'fall from heaven like autumn leaves,' the theory, data, and models are deficient. The specific mechanisms that govern the rate and direction of inventive activity, the drivers and scope for incremental improvements that occur during technology diffusion, and the spillover effects that cross-fertilize technological innovations remain poorly understood. In a work that will interest serious readers of history, policy, and economics, the editors and their distinguished contributors offer a unique, single volume overview of the theoretical and empirical work on technological change. Beginning with a survey of existing research, they provide analysis and case studies in contexts such as medicine, agriculture, and power generation, paying particular attention to what technological change means for efficiency, productivity, and reduced environmental impacts. The book includes a historical analysis of technological change, an examination of the overall direction of technological change, and general theories about the sources of change. The contributors empirically test hypotheses of induced innovation and theories of institutional innovation. They propose ways to model induced technological change and evaluate its impact, and they consider issues such as uncertainty in technology returns, technology crossover effects, and clustering. A copublication o Resources for the Future (RFF) and the International Institute for Applied Systems Analysis (IIASA).
Download or read book Conservation Laws and Symmetry Applications to Economics and Finance written by Ryuzo Sato and published by Springer Science & Business Media. This book was released on 1990-05-31 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modem geometric methods combine the intuitiveness of spatial visualization with the rigor of analytical derivation. Classical analysis is shown to provide a foundation for the study of geometry while geometrical ideas lead to analytical concepts of intrinsic beauty. Arching over many subdisciplines of mathematics and branching out in applications to every quantitative science, these methods are, notes the Russian mathematician A.T. Fomenko, in tune with the Renais sance traditions. Economists and finance theorists are already familiar with some aspects of this synthetic tradition. Bifurcation and catastrophe theo ries have been used to analyze the instability of economic models. Differential topology provided useful techniques for deriving results in general equilibrium analysis. But they are less aware of the central role that Felix Klein and Sophus Lie gave to group theory in the study of geometrical systems. Lie went on to show that the special methods used in solving differential equations can be classified through the study of the invariance of these equations under a continuous group of transformations. Mathematicians and physicists later recognized the relation between Lie's work on differential equations and symme try and, combining the visions of Hamilton, Lie, Klein and Noether, embarked on a research program whose vitality is attested by the innumerable books and articles written by them as well as by biolo gists, chemists and philosophers.
Download or read book Conservation Laws and Symmetry Applications to Economics and Finance written by Ryuzo Sato and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modem geometric methods combine the intuitiveness of spatial visualization with the rigor of analytical derivation. Classical analysis is shown to provide a foundation for the study of geometry while geometrical ideas lead to analytical concepts of intrinsic beauty. Arching over many subdisciplines of mathematics and branching out in applications to every quantitative science, these methods are, notes the Russian mathematician A.T. Fomenko, in tune with the Renais sance traditions. Economists and finance theorists are already familiar with some aspects of this synthetic tradition. Bifurcation and catastrophe theo ries have been used to analyze the instability of economic models. Differential topology provided useful techniques for deriving results in general equilibrium analysis. But they are less aware of the central role that Felix Klein and Sophus Lie gave to group theory in the study of geometrical systems. Lie went on to show that the special methods used in solving differential equations can be classified through the study of the invariance of these equations under a continuous group of transformations. Mathematicians and physicists later recognized the relation between Lie's work on differential equations and symme try and, combining the visions of Hamilton, Lie, Klein and Noether, embarked on a research program whose vitality is attested by the innumerable books and articles written by them as well as by biolo gists, chemists and philosophers.
Download or read book Theory of Technical Change and Economic Invariance written by Ryuzo Sato and published by Academic Press. This book was released on 2014-05-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Technical Change and Economic Invariance: Application of Lie Groups presents the economic invariance problems observable behavior under general transformations such as taste change or technical change. This book covers a variety of topics in economic theory, ranging from the analysis of production functions to the general recoverability problem of optimal dynamic behavior. Organized into nine chapters, this book begins with an overview of the theory of observable behavior by analyzing the invariant relationships among economic variables. This text then examines the Lie group theory which provides one of the most efficient methods of studying invariance properties. Other chapters consider the analysis of exogenous technical change, a process partly due to dynamic market forces of supply and demand. This book discusses as well the topics closely related to parametric changes under Lie groups and related transformations. The final chapter deals with mathematical foundations of the theory of observable market behavior. This book is a valuable resource for economists.
Download or read book Economic Growth written by Olivier de La Grandville and published by Cambridge University Press. This book was released on 2016-11-28 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the second edition of this user-friendly book, Olivier de La Grandville provides a clear and original introduction to the theory of economic growth, its mechanisms and its challenges. The book has been fully updated to incorporate several important new results and proofs since the first edition. In addition to a progressive treatment of dynamic optimization, readers will find intuitive derivations of all central equations of the calculus of variations and of optimal control theory. It offers a new solution to the fundamental question: How much should a nation save and invest? La Grandville shows that the optimal savings rule he suggests not only corresponds to the maximization of future welfare flows for society, but also maximizes the value of society's activity, as well as the total remuneration of labour. The rule offers a fresh alternative to dire current predictions about an ever-increasing capital–output ratio and a decrease of the labour share in national income.
Download or read book Economic Growth and Development written by Olivier La Grandville and published by Emerald Group Publishing. This book was released on 2011-12-12 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the very beginnings of economics as a science, which might be dated from Ibn Khaldun's "Introduction to History" (1377), the challenge of making societies escape from poverty and attain some degree of prosperity has always been, and can remain, a fundamental issue. This book presents research on each of these issues.
Download or read book Theoretical Foundations of Macroeconomic Policy written by Giovanni Di Bartolomeo and published by Routledge. This book was released on 2016-07-15 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent economic events driven by the great financial crisis of 2007-08 has challenged some "dogma", highlighting various limits and drawbacks of current paradigms. The crisis showed the limitations of monetary policy and led to a revaluation of what levels of public debt can be considered safe. This volume aims to refresh the debate on some important long-run macroeconomic issues from new and fresh perspectives. Theoretical Foundations of Macroeconomic Policy raises a number of questions relating to the challenges faced by macroeconomic theory and policies. The common line is the long run and policy perspective. The first part of the book is devoted to the theory of growth and productivity. The second part concentrates on long-run effects of fiscal and monetary policy. Specifically, topics investigated by the international range of authors are the theory of optimal growth, the productivity policies and production function estimations, demand- vs. supply- driven growth, optimal debt default and the incompleteness of financial markets, the long-run optimal inflation target and its relationship with public finance, the long term effects of government budget constraints on growth, and effect on optimal policies in non-market clearing environment. The book will be of interest to postgraduates, researchers, and academics studying macroeconomics and fiscal policies.
Download or read book Technology Organization and Economic Structure written by R. Sato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essays in this volume were presented to Professor Isamu Yamada in honor of his seventy-third birthday. In view of his many professional contributions and associations, a single volume of essays is really insufficient to house the works of all those who wish to be part of a venture of this kind. Therefore, the editors would like to apologize to those friends and well-wishers of Professor Yamada who could not be accommodated in this volume. Born in Nagoya in 1909, Professor Yamada began his brilliant career at Nagoya Commercial College where he studied economics, statistics, mathematics and physics. After serving as a Professor of Economics and Statistics at Yokohama College between 1939-1940, Professor Yamada moved to Hitotsubashi University in Tokyo, where he served as a Professor of Econometrics until his retirement in 1973. Currently, he is teaching at Asia University as a Professor of Economics and Statistics. During his long tenure at Hitotsubashi University (where Professor Ichiro Nakayama, a "Japanese Schumpeter", served as President of the University), Professor Yamada was instrumental in introducing several generation of students to the methods of modern econometrics. One of the editors (Ryuzo Sato) of this volume is a direct beneficiary of his lectures on modern econometric techniques. In the 1950's, Professor Yamada was one of several prominent Japanese economists who were selected for study abroad. It was during this time, on a visit to the Cowles Commission at the University of Chicago, that Professor Yamada met the other editor of this volume.
Download or read book Handbook of the Economics of Innovation written by Bronwyn H. Hall and published by Elsevier. This book was released on 2010-03-25 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economists examine the genesis of technological change and the ways we commercialize and diffuse it. The economics of property rights and patents, in addition to industry applications, are also surveyed through literature reviews and predictions about fruitful research directions.- Two volumes, available as a set or sold separately Expert articles consider the best ways to establish optimal incentives in technological progress Science and innovation, both their theories and applications, are examined at the intersections of the marketplace, policy, and social welfare. Economists are only part of an audience that includes attorneys, educators, and anyone involved in new technologies. For too long the policy importance of innovation has taken a back seat to short-term stimulus initiatives. Hall and Rosenberg have assembled a scholarly collection of papers that provide a timely guide for rediscovering the role of innovation in economic growth. Albert N. Link, University of North Carolina at Greensboro.
Download or read book Exemplary Economists North America written by Roger Backhouse and published by Edward Elgar Publishing. This book was released on 2000-01-01 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on leading economists who were born, or have spent the greater part of their lives, in America.
Download or read book Principles of Environmental Economics written by Ahmed Hussen and published by Routledge. This book was released on 2004-05-05 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Can economic growth be environmentally sustainable? This crucial question goes right to the heart of environmental economics and is a matter of increasing concern globally. The first edition of this popular title was the first introductory textbook in environmental economics that truly attempted to integrate economics with not only the environment but also ecology. This new version builds and improves upon the popular formula with new material, new examples, new pedagogical features and new questions for discussion. With international case-studies and examples, this book will prove an excellent choice for introducing both students and other academics to the world of environmental economics.
Download or read book Modeling Biased Technical Change Implications for Climate Policy written by Carlo Carraro and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate-economy models aiming at quantifying the costs and effects of climate change impacts and policies have become important tools for climate policy decision-making. Although there are several important dimensions along which models differ, this paper focuses on a key component of climate change economics and policy, namely technical change. This paper tackles the issues of whether technical change is biased towards the energy sectors, the importance of the elasticity of substitution between factors in determining this bias and how mitigation policy is likely to affect it. The analysis is performed using the World Induced Technical Change model, WITCH. Three different versions of the model are proposed. The starting set-up includes endogenous technical change only in the energy sector. A second version introduces endogenous technical change in both the energy and non-energy sectors. A third version of the model embodies different sources of technical change, namely R&D and human capital. Although different formulations of endogenous technical change have only a minor influence on climate policy costs, the macroeconomic effects on knowledge and human capital formation can vary greatly.
Download or read book Environmental and Health safety Regulations Productivity Growth and Economic Performance written by Gregory Christainsen and published by . This book was released on 1980 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Issues in Environmental Law Policy and Planning 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Environmental Law, Policy, and Planning: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Environmental Law, Policy, and Planning. The editors have built Issues in Environmental Law, Policy, and Planning: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Environmental Law, Policy, and Planning in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Environmental Law, Policy, and Planning: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
