Download or read book Best Practice Guide on the Control of Arsenic in Drinking Water written by Prosun Bhattacharya and published by IWA Publishing. This book was released on 2017-07-15 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arsenic in drinking water derived from groundwater is arguably the biggest environmental chemical human health risk known at the present time, with well over 100,000,000 people around the world being exposed. Monitoring the hazard, assessing exposure and health risks and implementing effective remediation are therefore key tasks for organisations and individuals with responsibilities related to the supply of safe, clean drinking water. Best Practice Guide on the Control of Arsenic in Drinking Water, covering aspects of hazard distribution, exposure, health impacts, biomonitoring and remediation, including social and economic issues, is therefore a very timely contribution to disseminating useful knowledge in this area. The volume contains 10 short reviews of key aspects of this issue, supplemented by a further 14 case studies, each of which focusses on a particular area or technological or other practice, and written by leading experts in the field. Detailed selective reference lists provide pointers to more detailed guidance on relevant practice. The volume includes coverage of (i) arsenic hazard in groundwater and exposure routes to humans, including case studies in USA, SE Asia and UK; (ii) health impacts arising from exposure to arsenic in drinking water and biomonitoring approaches; (iii) developments in the nature of regulation of arsenic in drinking water; (iv) sampling and monitoring of arsenic, including novel methodologies; (v) approaches to remediation, particularly in the context of water safety planning, and including case studies from the USA, Italy, Poland and Bangladesh; and (vi) socio-economic aspects of remediation, including non-market valuation methods and local community engagement.
Download or read book Guidelines for Drinking water Quality written by World Health Organization and published by World Health Organization. This book was released on 1993 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes the methods used in the surveillance of drinking water quality in the light of the special problems of small-community supplies, particularly in developing countries, and outlines the strategies necessary to ensure that surveillance is effective.
Download or read book Best Practice Guide on Sampling and Monitoring of Metals in Drinking Water written by Adam Postawa and published by IWA Publishing. This book was released on 2012-01-15 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of Metals and Related Substances in Drinking Water Set - buy all five books together to save over 30%! There is increasing concern regarding the presence of metals, particularly heavy metals in drinking water. In addition to the well-known toxic effects of lead, which are discussed at length in the Best Practice Guide on the Control of Lead in Drinking Water (in this series of Guides), the latest WHO guide values for maximum mean concentrations of arsenic, nickel and others in drinking water have been lowered compared to previous versions. European Union, USA and National standards for drinking water have followed the trend based largely on the same toxicological information. There is currently growing interest in the presence of hexavalent chromium in drinking water following its finding in some drinking waters in the USA above the national upper limit for total chromium and research suggesting that this limit needs to be considerably lowered. Some metals, particularly iron and manganese are associated with the production of discoloured (dirty) water in distribution systems and are therefore very important to the production of water with acceptable aesthetic qualities. Others (iron and aluminium) are key to the treatment of raw waters to drinking water standards. In most cases it is not possible to continuously monitor waters for metals and suitable sampling programmes must be designed and carried out to give results representative of the true water quality. The Best Practice Guide on Sampling and Monitoring of Metals in Drinking Water gives guidance on the design and quality control of sampling programmes for metals in Raw waters, in the water treatment works, in the drinking water distribution system and at the consumers tap. It also gives guidance on the analytical methods that can be used for the analysis of metals and quality control of those methods. Sampling programmes on the same water will vary according to the purpose for which they are carried out and the statistical techniques used to determine and design the different types of programme are outlined. Finally some case studies of optimisation of sampling are set out. Best Practice Guide on Sampling and Monitoring of Metals in Drinking Water is a valuable text for scientists, engineers and quality managers working in drinking water supply, laboratory managers and scientists who carry out sampling and analysis, and water industry consultants. It is also an excellent resource for post graduate and research workers in the field of drinking water. Editor: Dr Adam Postawa, AGH University, Krakow, Poland
Download or read book Best Practice Guide on the Control of Lead in Drinking Water written by Colin Hayes and published by . This book was released on 2010 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Best Practice Guide on the Control of Lead in Drinking Water brings together, for the first time, all of the regulatory, health, monitoring, risk assessment, operational and technological issues relevant to the control of lead in drinking water. The Best Practice Guide on the Control of Lead in Drinking Water brings together, for the first time, all of the regulatory, health, monitoring, risk assessment, operational and technological issues relevant to the control of lead in drinking water.
Download or read book Arsenic in Drinking Water and Food written by Sudhakar Srivastava and published by Springer. This book was released on 2019-08-08 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arsenic contamination poses a major environmental problem, especially in Southeast Asian countries like Bangladesh and India. Threatening the health of millions of people due to arsenic’s toxicity and carcinogenicity, the major routes of arsenic exposure for humans are either through drinking water or crops. Rice is the crop most affected by arsenic owing to its cultivation in major arsenic contaminated areas, biogeochemical factors in the soil during rice growth, and specific features of rice that enable it take up more arsenic than other crop plants. This book addresses the problem of arsenic by pursuing a holistic approach. It presents the status quo in different parts of the world (North and South America, Europe, Asia, etc.) and provides essential information on food-related arsenic exposure risks for humans, and possible preventive and curative measures for tackling arsenic poisoning. It covers the arsenic contamination status of rice, rice-based products, other vegetables, fishes, mushrooms, and other foods, with a special focus on rice-arsenic interactions. The mechanisms of arsenic uptake, translocation and distribution in plants and grains are also explained. In closing, the book reviews a variety of prospective agronomic and biotechnological solutions to the problem of arsenic accumulation in rice grains. The book is intended for a broad audience including researchers, scientists, and readers with diverse backgrounds including agriculture, environmental science, food science, environmental management, and human health. It can also be used as an important reference guide for undergraduate and graduate students, university faculties, and environmentalists.
Download or read book Metals and Related Substances in Drinking Water written by Prosun Bhattacharya and published by IWA Publishing. This book was released on 2011-11-25 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of Metals and Related Substances in Drinking Water Set - buy all five books together to save over 30%! Metals and Related Substances in Drinking Water comprises the proceedings of COST Action 637 - METEAU, held in Kristianstad, Sweden, October 13-15, 2010. This book collates the understanding of the various factors which control metals and related substances in drinking water with an aim to minimize environmental impacts. Metals and Related Substances in Drinking Water: Provides an overview of knowledge on metals and related substances in drinking water. Promotes good practice in controlling metals and related substances in drinking water. Helps to determining the environmental and socio-economic impacts of control measures through public participation Introduces the importance of mineral balance in drinking water especially when choosing treatment methods Shares practitioner experience. The proceedings of this international conference contain many state-of-the-art presentations by leading researchers from across the world. They are of interest to water sector practitioners, regulators, researchers and engineers.
Download or read book Best Practice Guide on Metals Removal From Drinking Water By Treatment written by Mustafa Ersoz and published by IWA Publishing. This book was released on 2012-05-31 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of Metals and Related Substances in Drinking Water Set - buy all five books together to save over 30%! The EU Drinking Water Directive sets a range of standards for metals and related substances in drinking water, many of which are concerned with health protection. A number of these standards are very stringent and require compliance to be assessed at the point of use. Because of the difficulties associated with monitoring, historic practices in many countries have concentrated on the quality of water within the distribution network. As a result, the magnitude of problems with some metals and related substances in drinking water is not fully appreciated in all European countries, and the extent and nature of corrective actions differ widely. This Best Practice Guide on Metals Removal From Drinking Water By Treatment describes drinking water standards and regulations, and explains the impact of a range of water treatment processes on metal levels in drinking water. Its objectives are to provide a basis for assessing the extent of problems and to identify appropriate water treatment options. The Guide provides a reasoned guide to selection of key water treatment processes. Each chapter focuses on a specific water treatment process and has been written by experts in that particular process. Best Practice Guide on Metals Removal From Drinking Water By Treatment provides practice-based knowledge for water engineers and scientists in large and small water utilities, regulatory agencies, health agencies and local municipalities (from cities through to small rural communities). It also supports university level teaching in degree schemes that relate to water management. This Guide is one of a series produced by the International Water Association’s Specialist Group on Metals and Related Substances in Drinking Water. The series is an up-to-date compilation of a range of scientific, engineering, regulatory and operational issues concerned with the control and removal of metals from drinking water.
Download or read book Best Practice Guide on the Sampling and Monitoring of Metals in Drinking Water written by Adam Postawa and published by . This book was released on 2012 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Arsenic in Drinking Water written by Subcommittee on Arsenic in Drinking Water and published by National Academies Press. This book was released on 1999-06-28 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Environmental Protection Agency (EPA) has been considering a more stringent regulation of arsenic in water. A significant reduction in the maximum contaminant level (MCL) could increase compliance costs for water utilities. This book discusses the adequacy of the current EPA MCL for protecting human health in the context of stated EPA policy and provides an unbiased scientific basis for deriving the arsenic standard for drinking water and surface water. Arsenic in Drinking Water evaluates epidemiological data on the carcinogenic and noncarcinogenic health effects of arsenic exposure of Taiwanese populations and compares those effects with the effects of arsenic exposure demonstrated in other countriesincluding the United States. The book also reviews data on toxicokinetics, metabolism, and mechanism and mode of action of arsenic to ascertain how these data could assist in assessing human health risks from arsenic exposures. This volume recommends specific changes to improve the toxicity analyses and risk characterization. The implications of the changes for EPAs current MCL for arsenic are also described.
Download or read book Drinking Water Quality Management from Catchment to Consumer written by Bob Breach and published by IWA Publishing. This book was released on 2011-10-04 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of Water Quality Set - Buy all four books and save over 30% on buying separately! Drinking Water Quality Management from Catchment to Consumer is a best practice book that builds on the experience of water suppliers and experts across the world in order to provide a practical guide to help utilities improve the management of drinking water quality. It is based on the Water Safety Plan approach and the principles of the Bonn Charter for Safe Drinking Water, and is intended to complement and support other relevant publications particularly the WHO Water Safety Plan Manual. It has evolved from the work of The Bonn Network which is a global group of water suppliers originally established to develop and share best practice in drinking water quality management based on the Bonn Charter. The emphasis is on practical information “by operators for operators”, learning from the experience of a range of water suppliers across the world. The book supports and encourages users to think through the best way for them to improve drinking water quality management taking account of local factors. It recognises that whilst water suppliers are central to the provision of good drinking water, this has to take place within a broader legal, institutional, and financial framework which is the responsibility of Government and others. It thus highlights the ways that water suppliers can work with a range of partners to ensure that all are committed to the same goal of good safe drinking water. Drinking Water Quality Management from Catchment to Consumer is an essential reference for water quality, laboratory and operational managers from water utilities around the world. It is also helpful to consultants working in this area and regulatory, health and municipal, and catchment management authorities. The book is of interest to academics working in the field of drinking water quality, and risk management and may be used on any courses aimed at managing drinking water quality.
Download or read book Best Practice Guide on the Control of Iron and Manganese in Water Supply written by Adam Postawa and published by IWA Publishing. This book was released on 2013-08-14 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Best Practice Guide on the Control of Iron and Manganese in Water Supply is one of a series produced by the International Water Association’s Specialist Group on Metals and Related Substances in Drinking Water. Iron and manganese are often found in soft upland water sources associated with natural organic matter and are also commonly found in the groundwater abstracted from confined and unconfined aquifers. The presence of iron and manganese in water is one of the most frequent reasons for customers’ complaint due to aesthetic issues (yellow, brown and black or stains on laundry and plumbing fixtures). These two metals can be removed fairly readily by physico-chemical treatment. The municipal treatment systems deployed derive benefit from their larger scale, particularly in relation to control, but the processes used are less suitable for the numerous small supplies that are the most common water supplies throughout Europe, especially in rural areas. One important source of iron in drinking water is from old corroded cast-iron water mains, historically the material used most commonly in supply networks. Replacement and refurbishment is very expensive and the major challenge is how best to prioritize available expenditure. The purpose for this Best Practice Guide on the Control of Iron and Manganese in Water Supply is to give readers the broad view of a problem based on state-of-the-art compilation of the range of scientific, engineering, regulatory and operational issues concerned with the control of iron and manganese in drinking water. The Guide is of interest to water utility practitioners, health agencies and policy makers, as well as students on civil engineering and environmental engineering courses. Authors: Dr Adam Postawa, AGH University of Science and Technology, Faculty of Geology, Geophysics and Environment Protection, Krakow, Poland and Dr Colin R Hayes, University of Swansea, UK, Chair of IWA Specialist Group on Metals and Related Substances in Drinking Water.
Download or read book Water Safety Plan Manual written by World Health Organization and published by World Health Organization. This book was released on 2009 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2004, the WHO Guidelines for Drinking Water Quality recommended that water suppliers develop and implement "Water Safety Plans" (WSPs) in order to systematically assess and manage risks. Since this time, governments and regulators, water suppliers and practitioners have increasingly embraced this approach, but they have also requested further guidance. This much-anticipated workbook answers this call by describing how to develop and implement a WSP in clear and practical terms. Stepwise advice is provided through 11 learning modules, each representing a key step in the WSP development and implementation process: 1. Assemble the WSP team; 2. Describe the water supply system; 3. Identify hazards and hazardous events and assess the risks; 4. Determine and validate control measures, reassess and prioritise the risks; 5. Develop, implement and maintain an improvement/upgrade plan; 6. Define monitoring of the control measures; 7. Verify the effectiveness of the WSP; 8. Prepare management procedures; 9. Develop supporting programmes; 10. Plan and carry out periodic review of the WSP; 11. Revise the WSP following an incident ; Every Module is divided into three sections: 'Overview', 'Examples and Tools', and 'Case studies'. The overview section provides a brief introduction to the Module, including why it is important and how it fits into the overall WSP development and implementation process. It outlines key activities that should be carried out, lists typical challenges that may be encountered, and summarizes the essential outputs to be produced. The examples and tools section provides resources which could be adapted to support the development and implementation of WSPs. These resources include example tables and checklists, template forms, diagrams, or practical tips to help a WSP team address specific challenges. These are often example outputs and methodologies adapted from recent WSP experiences. Each Module concludes with case studies so the reader can benefit from lessons-learned from real-life experiences. They are intended to make WSP concepts more concrete and to help readers anticipate issues and challenges that may arise. The descriptions were drawn from WSP initiatives in Australia, the Latin American and the Caribbean region (LAC), and the United Kingdom.
Download or read book Practical Guide for Ground water Sampling written by Michael J. Barcelona and published by . This book was released on 1985 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Drinking water Quality written by World Health Organization and published by World Health Organization. This book was released on 2004-08-31 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third edition of the WHO's guidelines which are used by countries worldwide to set standards for the regulation of drinking water quality and effective approaches to water safety management. This revised edition has been updated to take account of recent developments in risk assessment and management. Topics discussed include: a framework for drinking water safety and discussion of the roles and responsibilities of different stakeholders, such as national regulators, water suppliers and independent surveillance agencies; guidance on microbial safety of drinking water through safety plans; new scientific information on chemicals, waterborne pathogens and individual chemical hazards of actual or potential concern. It also considers the application of the guidelines in specific circumstances, such as in emergencies and disasters, and to specific applications, such as bottled water. It also contains information on over 130 documents which substantiate or explain the content of the Guidelines, and on good practice guidance in achieving drinking-water safety.
Download or read book Water Quality Monitoring written by Jamie Bartram and published by CRC Press. This book was released on 2020-10-14 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water quality monitoring is an essential tool in the management of water resources and this book comprehensively covers the entire monitoring operation. This important text is the outcome of a collborative programme of activity between UNEP and WHO with inputs from WMO and UNESCO and draws on the international standards of the International Organization of Standardization.
Download or read book A Regulators Guide to the Management of Radioactive Residuals from Drinking Water Treatment Technologies written by and published by . This book was released on 2005 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Quality Assessments written by Deborah V Chapman and published by CRC Press. This book was released on 1996-08-22 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guidebook, now thoroughly updated and revised in its second edition, gives comprehensive advice on the designing and setting up of monitoring programmes for the purpose of providing valid data for water quality assessments in all types of freshwater bodies. It is clearly and concisely written in order to provide the essential information for all agencies and individuals responsible for the water quality.
