Download or read book Bentonite Handbook III Rheology of Slurries written by E&S and published by VCH. This book was released on 2026-12-07 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bentonite Handbook written by Steffen Praetorius and published by John Wiley & Sons. This book was released on 2017-03-17 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipe jacking is a construction process for the no-dig laying of pipes. Successful pipe jacking demands low skin friction between the ground and the jacked pipe. This is achieved with bentonite lubrication. The bentonite slurry fed into the annular gap fulfils several purposes. It stabilises the annular gap by supporting the surrounding ground and reduces friction contact between ground and jacked pipe. The Bentonite Handbook deals comprehensibly with the relevant aspects of annular gap lubrication: starting with the ground conditions, which are of decisive importance for lubrication, through the rheological properties of the bentonite slurry to the technical components of lubrication technology and lubrication strategy. The use of standardised measuring apparatus is described as well as mixing equipment and the automatic lubrication system. Overview tables with calculations and suggested values for bentonite consumption quantities depending on the prevailing ground conditions and the pipe jacking parameters complete the recommendations.
Download or read book An Introduction to Geotechnical Processes written by John Woodward and published by CRC Press. This book was released on 2005-03-10 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of the solid part of the earth on which structures are built is an essential part of the training of a civil engineer. Geotechnical processes such as drilling, pumping and injection techniques enhance the viability of many construction processes by improving ground conditions. Highlighting the ground investigation necessary for the process, the likely improvement in strength of treated ground and testing methods An Introduction to Geotechnical Processes covers the elements of ground treatment and improvement, from the control of groundwater, drilling and grouting to ground anchors and electro-chemical hardening.
Download or read book Clay Science and Technology written by Gustavo Morari Do Nascimento and published by BoD – Books on Demand. This book was released on 2021-02 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art results of synthesis, characterization, modification, and technological applications of clays, clay minerals, and materials based on clay minerals, such as polymer-clay nanocomposites and clay hybrids. It also presents some important results obtained in the broad area of clays and clay materials characterization. Moreover, this book provides a comprehensive account of polymer and biopolymer-clay nanocomposites, the use of clay as adsorption materials of industrial pollutants, the ceramic industry, and the physical-chemical aspects of aqueous dispersions of clay and clay minerals. This book is beneficial for students, teachers, and researchers who are interested in expanding their knowledge about the use of clays in a diverse range of fields, including nanotechnology, biotechnology, environmental science, industrial remediation, pharmaceuticals, and so on.
Download or read book Slurry Systems Handbook Second Edition written by Baha Abulnaga and published by McGraw Hill Professional. This book was released on 2021-03-05 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete guide to slurries and slurry systems―fully updated for the latest advances This thoroughly revised guide contains start-to-finish coverage of slurry systems—from fundamentals and fluid mechanics to pump design and materials selection. Written by a recognized expert in the field, Slurry Systems Handbook, Second Edition clearly explains the components, dynamics, and design of slurry systems for many applications, including mineral processing, nuclear waste processing, extra heavy oil upgrade, mineral concentrate transport, tailings systems and metal melting. You will get real-world examples, solved problems, and current codes as well as guidelines for conducting feasibility studies and hands-on operating procedures. Coverage includes: General concepts of slurry flows Multi-species and stratified heterogeneous flows Non-Newtonian slurry flows Open channel and cascade slurry flows Slurry Hammer and Transients in closed and open channels Centrifugal and positive displacement slurry pumps Long distance slurry pipelines by commodity such as coal, copper, phosphate or gold Oil sand extraction Slurry reactors, hydrocracking and heat transfer Hydrocarbon and hydrate-based slurry pipelines Semi-solid metals casting Tailings systems, paste backfilling Slurry flows for nuclear waste processing De-silting hydroelectric reservoirs
Download or read book Handbook of Green Chemicals written by Michael Ash and published by Synapse Info Resources. This book was released on 2004 with total page 1364 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 7000 trade name products and more than 2500 generic chemicals that can be used in formulations to meet envionmental concerns and government regulations. This reference is designed to serve as an essential tool in the strategic decision-making process of chemical selection when focusing on human and environmental safety factors.Industries Covered: Adhesives ? Refrigerants ? Water Treatment ? Plastics ? Rubber ? Surfactants ? Paints & Coatings ? Food ? PharmaceuticalsCosmetics ? Petroleum Processing ? Metal Treatment ? TextilesThe chemicals and materials included are used in every aspect of the chemical industry. The reference is organized so that the reader can access the information based on the trade name, chemical components, functions and application areas, 'green' attributes, manufacturer, CAS number, and EINECS/ELINCS number.It contains a unique cross-reference that groups the trade name chemicals by one or more of these green chemical attributes: Biodegradable ? Environmentally Safe ? Environmentally Friendly ? Halogen-Free ? HAP's-Free ? Low Global WarmingLow Ozone-Depleting ? Nonozone-Depleting ? Low Vapor Pressure ? Noncarcinogenic ? Non-CFC ? Non-HCFCNonhazardous ? Nontoxic ? Recyclable ? SARA-Nonreportable ? SNAP (Significant New Alternative Policy) CompliantVOC-Compliant ? Low-VOC ? VOC-Free
Download or read book Slurry Systems Handbook written by Baha Abulnaga and published by McGraw Hill Professional. This book was released on 2002-04-29 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The most comprehensive resource on slurries and slurry systems, covering everything from fluid mechanics to soil classification, pump design to selection criteria Slurries are mixtures of liquids and solid particles of all types. For instance, liquid is used as a way of transporting what you get out of the mine, which might be better than shoveling it into freight cars and carrying it out by train. Slurry systems are fundamental to dredging, many mineral processes, bridge and tunnel construction, and to the manufacturer of synthetic petroleum products from oil sands.
Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control Handy index of chemical substances as well as a general chemical index
Download or read book Piling and Deep Foundations written by J. B. Burland and published by CRC Press. This book was released on 1989 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook on Tunnels and Underground Works written by Emilio Bilotta and published by CRC Press. This book was released on 2022-02-23 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a new, global, updated, thorough, clear and practical risk-based approach to tunnelling design and construction methods, and discusses detailed examples of solutions applied to relevant case histories. It is organized in three sequential and integrated volumes: Volume 1: Concept – Basic Principles of Design Volume 2: Construction – Methods, Equipment, Tools and Materials Volume 3: Case Histories and Best Practices The book covers all aspects of tunnelling, giving useful and practical information about design (Volume 1), construction (Volume 2) and best practices (Volume 3). It provides the following features and benefits: updated vision on tunnelling design, tools, materials and construction balanced mix of theory, technology and applied experience different and harmonized points of view from academics, professionals and contractors easy consultation in the form of a handbook risk-oriented approach to tunnelling problems. The tunnelling industry is amazingly widespread and increasingly important all over the world, particularly in developing countries. The possible audience of the book are engineers, geologists, designers, constructors, providers, contractors, public and private customers, and, in general, technicians involved in the tunnelling and underground works industry. It is also a suitable source of information for industry professionals, senior undergraduate and graduate students, researchers and academics.
Download or read book Handbook of Oil Gas Operations Drilling written by Christopher T. Franklin and published by . This book was released on 1991 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Fillers Extenders and Diluents written by Michael Ash and published by Synapse Info Resources. This book was released on 2007 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mine Planning and Equipment Selection 1997 written by R. Farana and published by CRC Press. This book was released on 2020-12-18 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting current and emerging technologies in the field of mine planning and equipment, this volume also covers control and automation for surface and underground mining. A wide range of papers from professionals in Europe, South America, Africa and Australia are featured.
Download or read book Handbook of Nanocelluloses written by Ahmed Barhoum and published by Springer Nature. This book was released on 2022-07-15 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamental aspects, experimental setup, synthesis, properties, and characterization of different nanocelluloses. It also explores the technology challenges of nanocelluloses and the emerging applications and the global markets of nanocelluloses-based systems. In particular, this book: · Covers the history of nanocelluloses, types and classifications, fabrication techniques, critical processing parameters, physical and chemical properties, surface functionalization, and other treatments to allow practical applications. · Covers all recent aspects of nanocelluloses technologies, from experimental set-up to industrial applications. · Includes new physical, chemical and biological techniques for nanocelluloses fabrication, in-depth treatment of their surface functionalization, and characterization. · Discusses the unique properties of nanocelluloses that can be obtained by modifying their diameter, morphology, composition and dispersion in other materials. · Discusses the properties and morphology of several kinds of dispersion in polymeric materials, such as micro/nanofiberlated cellulose, cellulose nanofibers, cellulose nanocrystals, amorphous cellulose nanoparticles, and hybrid cellulose nanomaterials. · Presents the different techniques for dispersion, and self-assembly of polymeric materials, critical parameters of synthesis, modelling and simulation, and characterization methods. · Highlights a wide range of emerging applications of nanocelluloses, e.g. drug delivery, tissue engineering, medical implants, medical diagnostics and therapy, biosensors, catalysis, energy harvesting, energy storage, water/waste treatment, papermaking, textiles, construction industry, automotive, aerospace and many more. · Provides an outlook on the opportunities and challenges for the fabrication and manufacturing of nanocelluloses in industry. · Provides an in-depth look at the nature of nanocelluloses in terms of their applicability for industrial uses. · Provides in-depth insight and review on most recent types of nanocelluloses-based systems of unique structures and compositions. · Highlights the challenges and interdisciplinary perspective of nanocelluloses-based systems in science, biology, engineering, medicine, and technology, incorporating both fundamentals and applications. - Demonstrates how cutting-edge developments in nanofibers translate into real-world innovations in a range of industry sectors. This Handbook is a valuable reference for materials scientists, biologists, physicians, chemical, biomedical, manufacturing and mechanical engineers working in R&D industry and academia, who want to learn more about how nanocelluloses-based systems are commercially applied.
Download or read book Rheology of Fresh Cement Based Materials written by Qiang Yuan and published by CRC Press. This book was released on 2022-12-28 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces fundamentals, measurements, and applications of rheology of fresh cement-based materials. The rheology of a fresh cement-based material is one of its most important aspects, characterizing its flow and deformation, and governing the mixing, placement, and casting quality of a concrete. This is the first book to bring the field together on an increasingly important topic, as new types of cement-based materials and new concrete technologies are developed. It describes measurement equipment, procedures, and data interpretation of the rheology of cement paste and concrete, as well as applications such as self-compacting concrete, pumping, and 3D printing. A range of other cement-based materials such as fiber-reinforced concrete, cemented paste backfills, and alkali-activated cement are also examined. Rheology of Fresh Cement-Based Materials serves as a reference book for researchers and engineers, and a textbook for advanced undergraduate and graduate students.
Download or read book Construction Materials Reference Book written by David Doran and published by Routledge. This book was released on 2013-07-24 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the definitive reference source for professionals involved in the conception, design and specification stages of a construction project. The theory and practical aspects of each material is covered, with an emphasis being placed on properties and appropriate use, enabling broader, deeper understanding of each material leading to greater confidence in their application. Containing fifty chapters written by subject specialists, Construction Materials Reference Book covers the wide range of materials that are encountered in the construction process, from traditional materials such as stone through masonry and steel to advanced plastics and composites. With increased significance being placed on broader environmental issues, issues of whole life cost and sustainability are covered, along with health and safety aspects of both use and installation.
Download or read book Slurry Handling written by N.P. Brown and published by Springer Science & Business Media. This book was released on 1991-12-31 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
