Download or read book Bending Strength Test and Evaluation of a Transtibial Prosthetic Socket Fabricated by Selective Laser Sintering written by and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transtibial prosthetic sockets made using selective laser sintering (SLS) of Duraform (Trademark) polyamide have no documented failure data. To produce prostheses with safe weight and usage limits, a nonstandard bending test was needed to determine the maximum safe loading of the socket and to recommend design improvements. The bending test was designed to replicate forces experienced by a wearer stepping down and forward as from a slight elevation. This test, along with a finite element analysis, provided information about the force limitations and weakest point of the socket. Suggestions for improving the design incorporated this information and laid the groundwork for further improvements. (21 figures, 15 refs.).

Download or read book Modeling and fabrication of prosthetic sockets using selective laser sintering written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Successful rehabilitation of transtibial amputees involves effective fitting of prosthetic components. However, conventional techniques used to produce sockets with suitable characteristics are labor intensive and expensive, and depend on the work of skilled prosthetists that are relatively scarce compared to the number of transtibial amputees. Selective Laser Sintering (SLS) is a very promising technique for producing subject-specific sockets for transtibial amputee prostheses due to its inherent ability to create complex three-dimensional objects directly from digital shape information without the need for specific tooling, molds or human labor. This dissertation presents a framework for the design, analysis, manufacture and testing of SLS sockets for transtibial prostheses, including the development of a computer-aided design model of the socket with compliant features to enhance comfort, structural analysis using a Finite Element Method (FEM) model, fabrication of a functional prototype using SLS, and experimental validation of the FEM analysis. The validation involved quantifying the failing conditions of sockets manufactured using the framework during destructive tests. The experimental failure loads for the sockets were within a 3% range of the FEM results and were considered satisfactory. The specific design of orthogonally compliant features for socket was also analyzed. This process included the preliminary evaluation of design alternatives using FEM with validation through experimental measurements, definition of specific design methodology for the best alternatives, incorporation of solution within the socket and refinement of design using auxiliary features obtained through topology optimization. Finally, to investigate the structural response of the SLS socket during gait, a FEM model (acquired from Computed Tomography data of a transtibial amputee) composed of a socket, liner and residual limb under quasi-static loading derived from typical ground reaction forces was employed. Three different compliant designs were evaluated to assess their ability to locally relieve local pressure during the stance phase of gait, as well as their structural integrity to ensure safety. The design with a compliant feature consisting of spiral slots within the socket wall was determined to produce a local average relief of 65.8% in the interface pressure, reducing the peak pressure from 172 kPa to 66.4 kPa.

Download or read book 13th International Conference on Biomedical Engineering written by Chwee Teck Lim and published by Springer Science & Business Media. This book was released on 2009-03-15 with total page 2355 pages. Available in PDF, EPUB and Kindle. Book excerpt: th On behalf of the organizing committee of the 13 International Conference on Biomedical Engineering, I extend our w- mest welcome to you. This series of conference began in 1983 and is jointly organized by the YLL School of Medicine and Faculty of Engineering of the National University of Singapore and the Biomedical Engineering Society (Singapore). First of all, I want to thank Mr Lim Chuan Poh, Chairman A*STAR who kindly agreed to be our Guest of Honour to give th the Opening Address amidst his busy schedule. I am delighted to report that the 13 ICBME has more than 600 participants from 40 countries. We have received very high quality papers and inevitably we had to turndown some papers. We have invited very prominent speakers and each one is an authority in their field of expertise. I am grateful to each one of them for setting aside their valuable time to participate in this conference. For the first time, the Biomedical Engineering Society (USA) will be sponsoring two symposia, ie “Drug Delivery S- tems” and “Systems Biology and Computational Bioengineering”. I am thankful to Prof Tom Skalak for his leadership in this initiative. I would also like to acknowledge the contribution of Prof Takami Yamaguchi for organizing the NUS-Tohoku’s Global COE workshop within this conference. Thanks also to Prof Fritz Bodem for organizing the symposium, “Space Flight Bioengineering”. This year’s conference proceedings will be published by Springer as an IFMBE Proceedings Series.

Download or read book Stress Distribution and Optimum Design of Polypropylene and Laminated Transtibial Prosthetic Sockets FEM and Experimental Implementations written by Hayder Al-Shuka and published by GRIN Verlag. This book was released on 2018-02-08 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific Study from the year 2017 in the subject Medicine - Other, , language: English, abstract: This study presents analyses for below knee prosthetic socket of a human. Socket stress distribution is performed on three types of socket, polypropylene (5mm), polypropylene (3mm) and a standard laminate (3mm) sockets to determine the stresses path through the prosthetic socket during the gait cycle. It is found that heel strike phase is the critical phase. The stresses increase at the socket base while the maximum deflection is maximum at the patellar region of the socket. This work is achieved by finite element program, ANSYS. The development of design specifications of a below the knee prosthetic socket is presented in this study for successful ambulation and comfort. Seven different design models are created by changing the socket wall thickness and the material. Polypropylene socket gives the best results with regard to the allowable deflection for the regions of the pressure relief areas of the stump. The effect of varying the modulus of elasticity on the polypropylene socket is considered in this study. Three models are analyzed with different tensile creep moduli during different periods. It is found that the polypropylene socket will enlarge in size with time. An experimental study is conducted to compare the strength of five prosthetic sockets made of different materials. Compression, three-point flexural and tensile tests are implemented by the Testometric machine. The laminate sockets have larger compressive stiffness than polypropylene while polypropylene has larger flexural stiffness than the tested laminates except for socket No.5.

Download or read book An Investigation Into Bending Strength and Interface Pressures of a Resin Reinforced Transtibial Prosthetic Socket Fabricated by Rapid Prototyping written by 呂權庭 and published by . This book was released on 2008 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development of a compliance model for a prosthetic socket fabricated using selective laser sintering written by Mahendra Bhagwat Lokhande and published by . This book was released on 2001 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Fabrication of Prosthetic Sockets Using Selective Laser Sintering written by Mario Carneiro Faustimi and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Analysis of a Volume Adjustable Transtibial Prosthetic Socket for Pediatric Amputees in Developing Countries written by Meagan Renee Vaughan and published by . This book was released on 2010 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: For pediatric amputees in developing countries, where characteristically rapid growth of children is compounded by a lack of medical services, maintaining proper socket fit is a challenging but necessary endeavor. A socket design that adjusts for radial and longitudinal growth will allow patients to wear the same socket for a longer period of time saving them the expense of subsequent fittings and hardware. Manufacture of such a socket poses a challenge for contemporary manufacturing processes. Due to its ability to rapidly manufacture complex part geometries, Selective Laser Sintering (SLS) is particularly suited to this application. Several preliminary design concepts for a volume adjustable transtibial SLS prosthetic socket for pediatric amputees in developing countries have been generated. These current design concepts utilize fasteners such as ratchet hooks and threads. Results from design and validation of theoretical models of these fastener concepts are the focus of this thesis.

Download or read book Design of a compliant prosthetic socket fabricated using Selected Laser Sintering written by Sean David Stephens and published by . This book was released on 1999 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Formulas for Stress Strain and Structural Matrices written by Walter D. Pilkey and published by John Wiley & Sons. This book was released on 2005 with total page 1544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book Solid Freeform Fabrication A New Direction in Manufacturing written by J.J. Beaman and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Freeform Fabrication is a set of manufacturing processes that are capable of producing complex freeform solid objects directly from a computer model of an object without part-specific tooling or knowledge. In essence, these methods are miniature manufacturing plants which come complete with material handling, information processing and materials processing. As such, these methods require technical knowledge from many disciplines; therefore, researchers, engineers, and students in Mechanical, Chemical, Electrical, and Manufacturing Engineering and Materials and Computer Science will all find some interest in this subject. Particular subareas of concern include manufacturing methods, polymer chemistry, computational geometry, control, heat transfer, metallurgy, ceramics, optics, and fluid mechanics. History of technology specialists may also find Chapter 1 of interest. Although this book covers the spectrum of different processes, the emphasis is clearly on the area in which the authors have the most experience, thermal laser processing. In particular, the authors have all been developers and inventors of techniques for the Selective Laser Sintering process and laser gas phase techniques (Selective Area Laser Deposition). This is a research book on the subject of Solid Freeform Fabrication.

Download or read book Fused Deposition Modeling Based 3D Printing written by Harshit K. Dave and published by Springer Nature. This book was released on 2021-04-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers 3D printing activities by fused deposition modeling process. The two introductory chapters discuss the principle, types of machines and raw materials, process parameters, defects, design variations and simulation methods. Six chapters are devoted to experimental work related to process improvement, mechanical testing and characterization of the process, followed by three chapters on post-processing of 3D printed components and two chapters addressing sustainability concerns. Seven chapters discuss various applications including composites, external medical devices, drug delivery system, orthotic inserts, watertight components and 4D printing using FDM process. Finally, six chapters are dedicated to the study on modeling and optimization of FDM process using computational models, evolutionary algorithms, machine learning, metaheuristic approaches and optimization of layout and tool path.

Download or read book Rapid Manufacturing written by Neil Hopkinson and published by John Wiley & Sons. This book was released on 2006-02-22 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Manufacturing is a new area of manufacturing developed from a family of technologies known as Rapid Prototyping. These processes have already had the effect of both improving products and reducing their development time; this in turn resulted in the development of the technology of Rapid Tooling, which implemented Rapid Prototyping techniques to improve its own processes. Rapid Manufacturing has developed as the next stage, in which the need for tooling is eliminated. It has been shown that it is economically feasible to use existing commercial Rapid Prototyping systems to manufacture series parts in quantities of up to 20,000 and customised parts in quantities of hundreds of thousands. This form of manufacturing can be incredibly cost-effective and the process is far more flexible than conventional manufacturing. Rapid Manufacturing: An Industrial Revolution for the Digital Age addresses the academic fundamentals of Rapid Manufacturing as well as focussing on case studies and applications across a wide range of industry sectors. As a technology that allows manufacturers to create products without tools, it enables previously impossible geometries to be made. This book is abundant with images depicting the fantastic array of products that are now being commercially manufactured using these technologies. Includes contributions from leading researchers working at the forefront of industry. Features detailed illustrations throughout. Rapid Manufacturing: An Industrial Revolution for the Digital Age is a groundbreaking text that provides excellent coverage of this fast emerging industry. It will interest manufacturing industry practitioners in research and development, product design and materials science, as well as having a theoretical appeal to researchers and post-graduate students in manufacturing engineering, product design, CAD/CAM and CIFM.

Download or read book Advances in Engineering Design written by Pawan Kumar Rakesh and published by Springer Nature. This book was released on 2021-02-04 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected peer-reviewed proceedings of the International Conference on Innovative Engineering Design (ICOIED 2020). The contents provide a multidisciplinary approach for the development of innovative product design and their benefits for the society. The book presents latest advances in various fields like design process, service development, micro/nano technology, sensors and MEMS, and sustainability in engineering design. This book can be useful for students, researchers, and professionals interested in innovative product/process design and development.

Download or read book Advances in Sustainable Polymers written by Vimal Katiyar and published by Springer Nature. This book was released on 2019-11-05 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic overview of the processing and applications of sustainable polymers. The volume covers recent advances in biomedical, food packaging, fuel cell, membrane, and other emerging applications. The book begins by addressing different sections of biomedical application including use of carbohydrate-based therapeutics, nanohybrids, nanohydrogels, bioresorbable polymers and their composites, polymer-grafted nanobiomaterials for biomedical devices and implants, nanofibres, and others. The second part of this book discusses various processing and packaging materials for food packaging applications. The last section discusses other emerging applications, including using microbial fuel cells for waste water treatment, microfluidic fuel cells for low power applications, among others. This volume will be relevant to researchers working to improve the properties of bio-based materials for their advanced application and wide commercialization.

Download or read book Handbook of Biomechatronics written by Jacob Segil and published by Academic Press. This book was released on 2018-11-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Biomechatronics provides an introduction to biomechatronic design as well as in-depth explanations of some of the most exciting and ground-breaking biomechatronic devices in the world today. Edited by Dr. Jacob Segil and written by a team of biomechatronics experts, the work begins with broad topics concerning biomechatronic design and components, followed by more detailed discussions of specific biomechatronic devices spanning many disciplines. This book is structured into three main parts: biomechatronic design, biomechatronic components, and biomechatronic devices. The biomechatronic design chapter discusses the history of biomechatronics, conceptual design theory, biomechatronic design methods, and design tools. The next section discusses the technologies involved in the following components: sensors, actuators, and control systems. The biomechatronic devices chapters contains distinct examples of biomechatronic devices spanning visual prostheses to brain-machine interfaces. Each chapter presents the development of these biomechatronic devices followed by an in-depth discussion of the current state of the art - The only book that covers biomechatronic design, components, and devices in one comprehensive text - Accessible for readers in multiple areas of study, such as bioengineering, computer science, electrical engineering, mechanical engineering, and chemical engineering - Includes the most recent and groundbreaking advances and work in the biomechatronics field through industry and academic contributors

Download or read book Cellulose written by Matheus Poletto and published by BoD – Books on Demand. This book was released on 2015-12-09 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellulose - Fundamental Aspects and Current Trends consists of 10 chapters written by international subject matter experts investigating the characteristics and current applications of this fascinating material. This book will help the reader to develop a deeper understanding about the concepts related to cellulose and the nanocellulose structure, modification, production, dissolution, and application. Biosynthesis mechanisms and medical applications of microbial cellulose are also discussed. This book will serve as the starting point for materials science researchers, engineers, and technologists from diverse backgrounds in physics, chemistry, biology, materials science, and engineering who want to know and better understand the unique characteristics of the most abundant biopolymer on earth.