Download or read book Benchmarking Chloride Ingress Models on Real life Case Studies Marine Submerged and Road Sprayed Concrete Structures written by Eddie Koenders and published by Springer Nature. This book was released on 2022-04-10 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work of RILEM Technical Committee 270-CIM: Benchmarking Chloride Ingress Models on Real-life Case Studies - Theory and Practice. It provides a comparative benchmark analysis of various types of chloride ingress models with emphasis on short, medium and long-term predictions. The book is subdivided in five chapters. The first chapter is an introduction on the benchmark and selected cases. The second chapter reports theoretical backgrounds of various analytical and numerical models for chloride ingress, followed by a short description of the models employed in the benchmark analysis. Chapter three describes the benchmark results of the Marine Submerged case, and chapter 4 of the Road Sprayed case. The last chapter reports conclusions, guidelines for calibration and recommendations. The book will benefit academics, designers, engineers, consultants, but also asset owners and standardization committees interested in durability and service life assessment of concrete structures.
Download or read book Benchmarking Chloride Ingress Models on Real life Case Studies Marine Submerged and Road Sprayed Concrete Structures written by Eddie Koenders and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work of RILEM Technical Committee 270-CIM: Benchmarking Chloride Ingress Models on Real-life Case Studies - Theory and Practice. It provides a comparative benchmark analysis of various types of chloride ingress models with emphasis on short, medium and long-term predictions. The book is subdivided in five chapters. The first chapter is an introduction on the benchmark and selected cases. The second chapter reports theoretical backgrounds of various analytical and numerical models for chloride ingress, followed by a short description of the models employed in the benchmark analysis. Chapter three describes the benchmark results of the Marine Submerged case, and chapter 4 of the Road Sprayed case. The last chapter reports conclusions, guidelines for calibration and recommendations. The book will benefit academics, designers, engineers, consultants, but also asset owners and standardization committees interested in durability and service life assessment of concrete structures.
Download or read book Digital Fabrication with Cement Based Materials written by Nicolas Roussel and published by Springer Nature. This book was released on 2022-01-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work of the RILEM Technical Committee 276-DFC: Digital fabrication with cement-based materials. The most important outcomes of the technical committee are presented. First, a unified process classification for digital fabrication with concrete is proposed, discussed and illustrated. Then, a state of the art of the testing methods (both at a material and structural level and in the fresh and hardened state) is provided. The gathered knowledge is expected to form the foundation of some quality control procedures for fresh properties along with hardened properties and service life performance. The book will benefit academics, practitioners, industry and standardization committees interested in digital fabrication with cement-based materials.
Download or read book Engineering and Design written by Us Army Corps Of Engineers and published by Military Bookshop. This book was released on 1995-06 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides guidance on evaluating the condition of the concrete in a structure, relating the condition of the concrete to the underlying cause or causes of that condition, selecting an appropriate repair material and method for any deficiency found, and using the selected materials and methods to repair or rehabilitate the structure. Guidance is also included on maintenance of concrete and on preparation of concrete investigation reports for repair and rehabilitation projects. Considerations for certain specialized types of rehabilitation projects are also given.
Download or read book Failure Distress and Repair of Concrete Structures written by Norb Delatte and published by Elsevier. This book was released on 2009-10-26 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and recognising failure mechanisms in concrete is a fundamental pre-requisite to determining the type of repair, or whether a repair is feasible. This title provides a review of concrete deterioration and damage, as well as looking at the problem of defects in concrete. It also discusses condition assessment and repair techniques. Part one discusses failure mechanisms in concrete and covers topics such as causes and mechanisms of deterioration in reinforced concrete, types of damage in concrete structures, types and causes of cracking and condition assessment of concrete structures. Part two reviews the repair of concrete structures with coverage of themes such as standards and guidelines for repairing concrete structures, methods of crack repair, repair materials, bonded concrete overlays, repairing and retrofitting concrete structures with fiber-reinforced polymers, patching deteriorated concrete structures and durability of repaired concrete. With its distinguished editor and international team of contributors, Failure and repair of concrete structures is a standard reference for civil engineers, architects and anyone working in the construction sector, as well as those concerned with ensuring the safety of concrete structures. Provides a review of concrete deterioration and damage Discusses condition assessment and repair techniques, standards and guidelines
Download or read book Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision written by Robby Caspeele and published by CRC Press. This book was released on 2018-10-31 with total page 3160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at IALCCE2018, the Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE2018), held in Ghent, Belgium, October 28-31, 2018. It consists of a book of extended abstracts and a USB device with full papers including the Fazlur R. Khan lecture, 8 keynote lectures, and 390 technical papers from all over the world. Contributions relate to design, inspection, assessment, maintenance or optimization in the framework of life-cycle analysis of civil engineering structures and infrastructure systems. Life-cycle aspects that are developed and discussed range from structural safety and durability to sustainability, serviceability, robustness and resilience. Applications relate to buildings, bridges and viaducts, highways and runways, tunnels and underground structures, off-shore and marine structures, dams and hydraulic structures, prefabricated design, infrastructure systems, etc. During the IALCCE2018 conference a particular focus is put on the cross-fertilization between different sub-areas of expertise and the development of an overall vision for life-cycle analysis in civil engineering. The aim of the editors is to provide a valuable source of cutting edge information for anyone interested in life-cycle analysis and assessment in civil engineering, including researchers, practising engineers, consultants, contractors, decision makers and representatives from local authorities.
Download or read book Non Destructive Evaluation of Reinforced Concrete Structures Deterioration Processes and Standard Test Methods written by Christiane Maierhofer and published by Woodhead Publishing. This book was released on 2010-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative book provides a comprehensive review of the highly important subject of non-destructive evaluation of reinforced concrete structures. Engineers have a range of sophisticated techniques at their disposal to assess the condition of reinforced concrete structures that do not cause material damage and which usually enable the structure to be used while the surveys are carried out. Non-destructive evaluation of the infrastructure also plays a key role in calculating and prioritising where money should be spent on repair or replacement. Providing details of related techniques and case studies, this book offers an overview of how to plan and implement the NDT of reinforced concrete structures.
Download or read book Model Code for Service Life Design written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006-01-01 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 34 addresses Service Life Design (SLD) for plain concrete, reinforced concrete and pre-stressed concrete structures, with a special focus on design provisions for managing the adverse effects of degradation. Its objective is to identify agreed durability related models and to prepare the framework for standardization of performance based design approaches. Four different options for SLD are given: - a full probabilistic approach, - a semi probabilistic approach (partial factor design), - deemed to satisfy rules, - avoidance of deterioration. The service life design approaches described in this document may be applied for the design of new structures, for updating the service life design if the structure exists and real material properties and/or the interaction of environment and structure can be measured (real concrete covers, carbonation depths), and for calculating residual service life. The bulletin is divided into five chapters: 1. General 2. Basis of design 3. Verification of Service Life Design 4. Execution and its quality management 5. Maintenance and condition control It also includes four informative annexes, which give background information and examples of procedures and deterioration models for the application in SLD. The format of Bulletin 34 follows the CEB-FIP tradition for Model Codes: the main provisions are given on the right-hand side of the page, and on the left-hand side, the comments. Note: An Italian translation of Bulletin 34 is also available; contact us for further details.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Intakes and Outfalls for Seawater Reverse Osmosis Desalination Facilities written by Thomas M. Missimer and published by Springer. This book was released on 2015-04-07 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book assembles the latest research on new design techniques in water supplies using desalinated seawater. The authors examine the diverse issues related to the intakes and outfalls of these facilities. They clarify how and why these key components of the facilities impact the cost of operation and subsequently the cost of water supplied to the consumers. The book consists of contributed articles from a number of experts in the field who presented their findings at the "Desalination Intakes and Outfalls" workshop held at King Abdullah University of Science and Technology (KAUST) in Saudi Arabia in October, 2013. The book integrates coverage relevant to a wide variety of researchers and professionals in the general fields of environmental engineering and sustainable development.
Download or read book Performance of Concrete in Marine Environment written by American Concrete Institute and published by Detroit : American Concrete Institute. This book was released on 1980 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alkali Activated Materials written by John L. Provis and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a State of the Art Report resulting from the work of RILEM Technical Committee 224-AAM in the period 2007-2013. The Report summarises research to date in the area of alkali-activated binders and concretes, with a particular focus on the following areas: binder design and characterisation, durability testing, commercialisation, standardisation, and providing a historical context for this rapidly-growing research field.
Download or read book Handbook of Corrosion Engineering written by Pierre Roberge and published by McGraw-Hill Prof Med/Tech. This book was released on 1999-09-30 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reduce the enormous economic and environmental impact of corrosion Emphasizing quantitative techniques, this guide provides you with: *Theory essential for understanding aqueous, atmospheric, and high temperature corrosion processes Corrosion resistance data for various materials Management techniques for dealing with corrosion control, including life prediction and cost analysis, information systems, and knowledge re-use Techniques for the detection, analysis, and prevention of corrosion damage, including protective coatings and cathodic protection More
Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.
Download or read book Rainwater Tank Systems for Urban Water Supply written by Ashok K. Sharma and published by IWA Publishing. This book was released on 2015-05-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rainwater tank systems have been widely adopted across the world to provide a safe local source of water in underdeveloped rural areas, a substitution for mains water for non potable end uses in water stressed urban areas, as well as providing flooding control in monsoonal climates such as Korea, or combined sewer systems such as Germany. The importance of these systems in cities has grown, as water managers seek to provide a range of decentralised solutions to supply constraints of current water supply systems, whilst reducing the impact of urban development on the natural environment, and increasing resilience to the impacts of climate change. Rainwater tank systems are now often implemented under integrated urban water management (IUWM) and water sensitive urban design (WSUD) philosophies, which take a holistic view of the urban water cycle. Rainwater Tank Systems for Urban Water Supply is based on a comprehensive, multi-million dollar research program that was undertaken in South East Queensland (SEQ) Australia in response to the Millennium drought when the water supply level in the regions drinking water dams dropped to 17% in July 2007 and the area came close to running out of water. In particular, the book provides insights and detailed analysis of design, modelling, implementation, operation, energy usage, economics, management, health risk, social perceptions and implications for water quality/quantity of roof water runoff. The approaches and methodologies included in Rainwater Tank Systems for Urban Water Supply inform and validate research programs, and provide insights on the expected performance and potential pitfalls of the adoption of rainwater tanks systems including: actual harvested yield and resulting mains water savings, optimal sizing for rainwater storages and roof collection systems, expected water quality and implications for managing public health risks, modelling tools available for decision support, operation and management approaches of a decentralised asset at the household scale and community acceptance. The book is suitable for use at undergraduate and post graduate levels and is of particular interest to water professionals across the globe, who are involved in the strategic water planning for a town, city or a region. It is a valuable resource for developers, civil designers, water planners, architects and plumbers seeking to implement sustainable water servicing approaches for residential, industrial and commercial developments.
Download or read book Ageing Management of Concrete Structures in Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA Nuclear Energy. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is one in a series of reports on the assessment and management of ageing of major nuclear power plant (NPP) components. Current practices for assessment of safety margins (fitness for service) and inspection, monitoring and mitigation of ageing related degradation of selected concrete structures related to NPPs are documented. Implications for and differences in new reactor designs are discussed. This information is intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues.
Download or read book Diagnosis Prognosis of AAR Affected Structures written by Victor E. Saouma and published by Springer Nature. This book was released on 2020-09-21 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work of the RILEM Technical Committee 259-ISR. Addressing two complementary but fundamental issues: the kinetics of the reaction, and how this will affect the integrity of the structure (serviceability and strength), it also provides methodology for assessing past deterioration to enable readers to make engineering/science-based predictions concerning future expansion. The book is divided into six major topics: selection and interpretation of optimal monitoring system for structures undergoing expansion to monitor the progress of the swelling evolution and its consequences; development/refinement of current laboratory procedures to determine the kinetics of the reaction i.e. expansion vs (future) time, and to determine the kinetic characteristics of the time-dependent reaction to be used in a finite element simulation; extrapolation of results from structural component laboratory testing; selection of material properties based on data from existing structures affected by the alkali silica reaction or delayed ettringite formation; identification of critical features that should be present in a finite element code, development of test problems for validation, and a survey of relevant programs able to conduct a transient structural analysis of a structure undergoing chemically induced expansion; and lastly guidelines for finite element codes. The book is intended for practitioners responsible for concrete structures affected by the damaging alkali aggregate reaction, engineers dealing with aging structures, and researchers in the field.
