Download or read book The Behavior of Thin Walled Structures Beams Plates and Shells written by Jack R. Vinson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended primarily as a teaching text, as well as a reference for individual study in the behavior of thin walled structural components. Such structures are widely used in the engineering profession for spacecraft, missiles, aircraft, land-based vehicles, ground structures, ocean craft, underwater vessels and structures, pressure vessels, piping, chemical processing equipment, modern housing, etc. It presupposes that the reader has already completed one basic course in the mechanics or strength of materials. It can be used for both undergraduate and graduate courses. Since beams (columns, rods), plates and shells comprise components of so many of these modern structures, it is necessary for engineers to have a working knowledge of their behavior when these structures are subjected to static, dynamic (vibration and shock) and environmental loads. Since this text is intended for both teaching and self-study, it stresses fundamental behavior and techniques of solution. It is not an encyclopedia of all research or design data, but provides the reader the wherewithal to read and study the voluminous literature. Chapter 1 introduces the three-dimensional equations oflinear elasticity, deriving them to the extent necessary to treat the following material. Chapter 2 presents, in a concise way, the basic assumptions and derives the governing equations for classical Bernoulli-Euler beams and plates in a manner that is clearly understood.
Download or read book Introduction to the Theory of Thin walled Structures written by Noel W. Murray and published by Oxford University Press, USA. This book was released on 1986 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces designers to the theoretical aspects of the behaviour of thin-walled structures, and then shows how some codes of practice have incorporated this theory and modified it to be more digestible in a design office.
Download or read book Behaviour of Thin walled Structures written by J. Rhodes and published by Elsevier Science & Technology. This book was released on 1984 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Walled Structures written by J. Loughlan and published by CRC Press. This book was released on 2018-02-06 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the Fourth International Conference of Thin-Walled Structures (ICTWS4), and contains 110 papers which, collectively, provide a comprehensive state-of-the-art review of the progress made in research, development and manufacture in recent years in thin-walled structures.The presentations at the conference had representation form 35 different countries and their topical areas of interest included aeroelastic response, structural-acoustic coupling, aerospace structures, analysis, design, manufacture, cold-formed structures, cyclic loading, dynamic loading, crushing, energy absorption, fatigue, fracture, damage tolerance, plates, stiffened panels, plated structures, polymer matrix composite members, sandwich structures, shell structures, thin-walled beams, columns and vibrational response. The range of applications of thin-walled structures has become increasingly diverse with a considerable deployment of thin-walled structural elements and systems being found in a wide range of areas within Aeronautical, Automotive, Civil, Mechanical, Chemical and Offshore Engineering fields. This volume is an extremely useful reference volume for researchers and designers working within a wide range of engineering disciplines towards the design, development and manufacture of efficient thin-walled structural systems.
Download or read book Fire Performance of Thin Walled Steel Structures written by Yong Wang and published by CRC Press. This book was released on 2020-04-01 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an authoritative account of the latest developments in fire performance and fire resistant design of thin-walled steel structures. It provides a comprehensive review of recent research, including fire tests of thin-walled steel structural members and systems, numerical modelling of heat transfer and structural behaviour, elevated temperature material properties, methods of improving fire resistance of thin-walled steel structures, and performance based fire resistant design methods. Worked examples navigate the reader through some of the complexities of this specialist subject. This is the first book devoted to the fundamental principles of this emerging subject, as thin-walled steel structures are increasingly being used in building construction. It will be valuable to fire protection engineers who want to optimise fire resistant design of thin-walled steel structures, and specialist manufacturers needing to control fire resistance of thin-walled steel structural systems, as well as to the research community.
Download or read book The Behavior of Shells Composed of Isotropic and Composite Materials written by Jack R. Vinson and published by Springer Science & Business Media. This book was released on 1992-01-31 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shell structures are used in all phases of structures, from space vehicles to deep submergence hulls, from nuclear reactors to domes on sport arenas and civic buildings. With new materials and manufacturing methods, curved thin walled structures are being used increasingly. This text is a graduate course in the theory of shells. It covers shells of isotropic materials, such as metal alloys and plastics, and shells of composite materials, such as fibre reinforced polymer, metal or ceramic matrix materials. It provides the essential information for an understanding of the underlying theory, and solution of some of the basic problems. It also provides a basis to study the voluminous shell literature. Beyond being primarily a textbook, it is intended also for self study by practising engineers who would like to learn more about the behaviour of shells. The book has two parts: Part I deals with shells of isotropic materials. In this part the mathematical formulations are introduced involving curvilinear coordinates. The techniques of solutions and resulting behavior is compared to planar thin walled isotropic structures such as plates and beams. Part II then treats the behavior of shells, involving anisotropic composite materials, so widely used today. The analysis involves the complications due to the many elastic constants, effects of transverse shear deformation, thermal thickening and offer effects arising from the properties of composite materials.
Download or read book Crashworthiness of Composite Thin Walled Structures written by A.G. Mamalis and published by Routledge. This book was released on 2017-11-22 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE INTRODUCTION Vehicle crashworthiness has been improving in recent years with attention mainly directed towards reducing the impact of the crash on the passengers. Effort has been spent in experimental research and in establishing safe theoretical design criteria on the mechanics of crumpling, providing to the engineers the ability to design vehicle structures so that the maximum amount of energy will dissipate while the material surrounding the passenger compartment is deformed, thus protecting the people inside. During the last decade the attention given to crashworthiness and crash energy management has been centered on composite structures. The main advantages of fibre reinforced composite materials over more conventional isotropic materials, are the very high specific strengths and specific stiffness which can be achieved. Moreover, with composites, the designer can vary the type of fibre, matrix and fibre orientation to produce composites with proved material properties. Besides the perspective of reduced weight, design flexibility and low fabrication costs, composite materials offer a considerable potential for lightweight energy absorbing structures; these facts attract the attention of the automotive and aircraft industry owing to the increased use of composite materials in various applications, such as frame rails used in the apron construction of a car body and the subfloor of an aircraft, replacing the conventional materials used. Our monograph is intended to provide an introduction to this relatively new topic of structural crashworthiness for professional engineers. It will introduce them to terms and concepts of it and acquaint them with some sources of literature about it. We believe that our survey constitutes a reasonably well-balanced synopsis of the topic.
Download or read book Thin walled Structures written by J. Rhodes and published by John Wiley & Sons. This book was released on 1980 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Trends in Research on Steel Aluminium and Composite Structures written by Marian A. Giżejowski and published by Routledge. This book was released on 2021-06-09 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Trends in Research on Steel, Aluminium and Composite Structures includes papers presented at the 14th International Conference on Metal Structures 2021 (ICMS 2021, Poznań, Poland, 16-18 June 2021). The 14th ICMS summarised a few years’ theoretical, numerical and experimental research on steel, aluminium and composite structures, and presented new concepts. This book contains six plenary lectures and all the individual papers presented during the Conference. Seven plenary lectures were presented at the Conference, including "Research developments on glass structures under extreme loads", Parhp3D – The parallel MPI/openMPI implementation of the 3D hp-adaptive FE code", "Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond", "Stainless steel structures – research, codification and practice", "Testing, modelling and design of bolted joints – effect of size, structural properties, integrity and robustness", "Design of hybrid beam-to-column joints between RHS tubular columns and I-section beams" and "Selected aspects of designing the cold-formed steel structures". The individual contributions delivered by authors covered a wide variety of topics: – Advanced analysis and direct methods of design, – Cold-formed elements and structures, – Composite structures, – Engineering structures, – Joints and connections, – Structural stability and integrity, – Structural steel, metallurgy, durability and behaviour in fire. Modern Trends in Research on Steel, Aluminium and Composite Structures is a useful reference source for academic researchers, graduate students as well as designers and fabricators.
Download or read book Thin walled Structures written by and published by . This book was released on 1967 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Buried Structures written by Dr P S Bulson and published by CRC Press. This book was released on 1984-12-20 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much of the infrastructure of modern society is buried below ground. Pipeline, conduits and culverts carry the services on which our economies depend and the strength and resilience of such structures is of vital importance. Larger underground construction is becoming more common in cities and towns, and in defence installations. This book brings t
Download or read book Energy Absorption of Structures and Materials written by G Lu and published by Elsevier. This book was released on 2003-10-31 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important study focuses on the way in which structures and materials can be best designed to absorb kinetic energy in a controllable and predictable manner. Understanding of energy absorption of structures and materials is important in calculating the damage to structures caused by accidental collision, assessing the residual strength of structures after initial damage and in designing packaging to protect its contents in the event of impact. Whilst a great deal of recent research has taken place into the energy absorption behaviour of structures and materials and significant progress has been made, this knowledge is diffuse and widely scattered. This book offers a synthesis of the most recent developments and forms a detailed and comprehensive view of the area. It is an essential reference for all engineers concerned with materials engineering in relation to the theory of plasticity, structural mechanics and impact dynamics. - Important new study of energy absorption of engineering structures and materials - Shows how they can be designed to withstand sudden loading in a safe, controllable and predictable way - Illuminating case studies back up the theoretical analysis
Download or read book STESSA 2003 Behaviour of Steel Structures in Seismic Areas written by Federico Mazzolani and published by Routledge. This book was released on 2018-03-29 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive overview of recent developments in the field of seismic resistant steel structures, this volume reports upon the latest progress in theoretical and experimental research into the area, and groups findings in the following key sections: · performance-based design of structures · structural integrity under exceptional loading · material and member behaviour · connections · global behaviour · moment resisting frames · passive and active control · strengthening and repairing · codification · design and application
Download or read book Proceedings of the Third International Conference on Coupled Instabilities in Metal Structures written by Dinar Camotim and published by World Scientific. This book was released on 2000 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of coupled instabilities is a fascinating field of research with a wide range of practical applications, particularly in the analysis and design of metal structures. Despite the excellent body of existing results concerning coupled instability structural behaviour, this situation has not yet been adequately translated into design rules or specifications. In fact, only to a small extent do modern design codes for metal structures take advantage of the significant progress made in the field. This book, which contains all the invited general reports and selected papers presented at the Third International Conference on "Coupled Instabilities in Metal Structures". (CIMS '2000), should provide a meaningful contribution towards filling the gap between research and practice.
Download or read book Structural Crashworthiness written by Norman Jones and published by Butterworth-Heinemann. This book was released on 1983 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Walled Structures written by J. Loughlan and published by CRC Press. This book was released on 2004-06-01 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the Fourth International Conference of Thin-Walled Structures (ICTWS4), and contains 110 papers which, collectively, provide a comprehensive state-of-the-art review of the progress made in research, development and manufacture in recent years in thin-walled structures. The presentations at the conference have representation form 35 different countries and their topical areas of interest include Aeroelactic response and structural-acoustic coupling, Aerospace structures, Analysis, design and manufacture, Cold-formed structures, Cyclic loading, Dynamic loading, crushing and energy absorption, Fatigue, fracture and damage tolerance, Plates, stiffened panels and plated structures, Polymer matrix composite members, Sandwich structures, Shell structures, Thin-walled beams and columns and Vibrational response.The range of applications of thin-walled structures has become increasingly diverse with a considerable deployment of thin-walled structural elements and systems being found in a wide range of areas within Aeronautical, Automotive, Civil, Mechanical, Chemical and Offshore Engineering fields. This volume is an extremely useful reference volume for researchers and designers working within a wide range of engineering disciplines towards the design, development and manufacture of efficient thin-walled structural systems.
Download or read book High Performance Structures and Materials VI written by Willy Patrick Wilde and published by WIT Press. This book was released on 2012 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the edited papers presented at the Sixth International Conference on High Performance Structures and Materials, High Performance Structures and Materials VI addresses the issues involved with advanced types of structures, particularly those based on new concepts or new materials. Contributions will highlight the latest developments in design, optimisation, manufacturing and experimentation in these areas.The use of novel materials and new structural concepts nowadays is not restricted to highly technical areas like aerospace, aeronautical applications or the automotive industry, but affects all engineering fields including those such as civil engineering and architecture. Most high performance structures require the development of a generation of new materials, which can more easily resist a range of external stimuli or react in a non-conventional manner.The book will cover such topics as: Composite materials and structures, Lightweight structures, Nanocomposites, High performance concretes, Concrete fibres, Automotive composites, Steel structures, Natural fibre composites, Timber structures, Material characterisation, Experiments and numerical analysis, Damage and fracture mechanics, Computational intelligence, Adaptable and mobile structures, Environmentally friendly structures.
