Download or read book Pile groups under cyclic lateral loading written by Christoph Niemann and published by BoD – Books on Demand. This book was released on 2020-01-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the aim of this research work is to investigate and to assess quatitatively as well as quantitatively the bearing behaviour of pile groups subjected to cyclic lateral loading. In this context, the influences of different boundary conditions, in particular the soil properties and the pile group geometry are to be analysed experimentally and numerically. Based on a brief literature review in chapter 2, model tests (centrifuge and small-scale at 1g) and numerical investigations have been carried out to contribute to a better understanding of the cyclic behaviour of pile groups. Chapter 3 describes the test procedure and summarises the results of centrifuge tests, which have been carried out at the Centre for Offshore Foundation Systems (COFS) in Perth, Australia. Further investigations have been carried out by means of smallscale model tests at 1g in the testing facilities at the University of Kassel, Germany, with the results as summarised in chapter 4. A comparison of individual results of both test series is provided in chapter 5. The numerical studies in chapter 6 have been carried out in order to analyse the general ability of numerical simulations to calculate the response of pile groups to cyclic lateral loading. Based on the previously derived results, chapter 7 provides equations that can be applied to estimate the cyclic accumulation of lateral displacements of pile groups as well as the cyclic changes of the load distribution within pile groups.

Download or read book Design of Piles Under Cyclic Loading written by Alain Puech and published by John Wiley & Sons. This book was released on 2018-01-04 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in the fields of energy, transport and industrial engineering have led to the emergence of new types of structures and infrastructures subject to variable stresses, for which the usual methods for designing pile foundations are now inadequate. The recommendations presented in this book will help to partly fill this technical gap by proposing a methodological approach and calculation methods to take account of the effects of cyclic loads in the design of foundations on piles. These are based on both laboratory and full scale experiments, and on modeling carried out within the framework of the national SOLCYP project.

Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.

Download or read book Single Piles and Pile Groups Under Lateral Loading written by Lymon C. Reese and published by CRC Press. This book was released on 2010-12-15 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t

Download or read book Pile Foundations in Engineering Practice written by Shamsher Prakash and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.

Download or read book Large Scale Pile Tests in Clay written by Institution of Civil Engineers (Great Britain) and published by Thomas Telford. This book was released on 1993-04-08 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the 1980's, research was being carried out to instrument and monitor the piled foundation beneath one leg of the BP Magnus platform in order to determine the actual loads imposed on the piles and seabed by the structural and environmental forces. This volume brings together the findings and discussions resulting from this research.

Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.

Download or read book Geotechnical and Geoenvironmental Engineering Handbook written by R. Kerry Rowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface. Dedication. List of Figures. List of Tables. List of Contributors. Basic Behavior and Site Characterization. 1. Introduction; R.K. Rowe. 2. Basic Soil Mechanics; P.V. Lade. 3. Engineering Properties of Soils and Typical Correlations; P.V. Lade. 4. Site Characterization; D.E. Becker. 5. Unsaturated Soil Mechanics and Property Assessment; D.G. Fredlund, et al. 6. Basic Rocks Mechanics and Testing; K.Y. Lo, A.M. Hefny. 7. Geosynthetics: Characteristics and Testing; R.M. Koerner, Y.G. Hsuan. 8. Seepage, Drainage and Dewatering; R.W. Loughney. Foundations and Pavements. 9. Shallo.

Download or read book Physical Modelling in Geotechnics Two Volume Set written by Sarah Springman and published by CRC Press. This book was released on 2010-06-17 with total page 1522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions.Topics presented at the conference:Soil - Structure - Interaction;

Download or read book Proceedings of the Second International Conference on the Behaviour of Off Shore Structures written by and published by . This book was released on 1979 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Civil Engineering written by Scott Arthur and published by Springer Nature. This book was released on 2021-10-30 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 5th International Conference on Advances in Civil Engineering (ICACE 2020), covering basic civil engineering branches. The book covers some hands-on articles on different realistic problems in civil engineering. It highlights the current application of advanced civil engineering knowledge in developing countries. Various topics covered include construction and building materials, eco-friendly ground improvement, water and wastewater management, solid waste management, durability of concrete structures, various aspects of foundation engineering, transportation engineering & planning scenarios in developing countries, and highway materials. A few articles also discussed the advancement in civil engineering fields from global perspectives too. The book will be useful for professionals and researchers working in the area of civil engineering.

Download or read book Design of Piles Under Cyclic Loading written by Alain Puech and published by John Wiley & Sons. This book was released on 2017-11-29 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in the fields of energy, transport and industrial engineering have led to the emergence of new types of structures and infrastructures subject to variable stresses, for which the usual methods for designing pile foundations are now inadequate. The recommendations presented in this book will help to partly fill this technical gap by proposing a methodological approach and calculation methods to take account of the effects of cyclic loads in the design of foundations on piles. These are based on both laboratory and full scale experiments, and on modeling carried out within the framework of the national SOLCYP project.

Download or read book Canadian Geotechnical Journal written by and published by . This book was released on 2007 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recommendations on Piling EA Pf hle written by Geotechnik and published by John Wiley & Sons. This book was released on 2013-12-09 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a complete and detailed overview of piling systems and their application. The design and construction of piled foundations is based on Eurocode 7 and DIN 1054 edition 2010 as well as the European construction codes DIN EN 1536 (Bored piles), DIN EN 12699 (Displacement piles) and DIN EN 14199 (Micropiles). These recommendations also deal with - categorisation of piling systems, - actions on piles from structural loading, negative skin friction and side pressure, - pile resistances from static and dynamic pile test loading as well as extensive tables with the pile load-bearing capacity of nearly all piling systems based on values from practical experience, - pile groups, - performance of static and dynamic test loading and integrity tests, - load-bearing behaviour and verifications for piles under cyclical, dynamic and impact actions - quality assurance for construction. An appendix with numerous calculation examples completes the work. As part of the approval procedure for offshore wind energy structures, the Federal Office for Shipping and Hydrography (BSH) demands verifications according to the new Chapter 13 ("Load-bearing behaviour and verifications for piles under cyclical, dynamical and impact actions") of the EA Pfähle (the recommendations of the Piling working group - 2nd edition), which deals with external pile resistance for the foundations of offshore wind energy structures and the types of verifications to be provided under cyclical actions. The publication of the EA-Pfähle recommendations by the Piling working group of the German Society for Geotechnics (DGGT), which works with the same members as the piling standards committee NA 00-05-07, is intended to provide assistance for engineers active in the design, calculation and construction of piled foundations. The recommendations can thus be considered as rules of the technology and as a supplement to the available codes and standards.

Download or read book Centrifuges in Soil Mechanics written by W.H. Craig and published by CRC Press. This book was released on 2020-08-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains technical papers, presented in a discussion session at the XI International Conference on Soil Mechanics and Foundation Engineering held in San Francisco in 1985, on the role of centrifuge in geotechnical testing, with descriptions of test facilities.

Download or read book Cyclic Behaviour of Soils and Liquefaction Phenomena written by Th. Triantafyllidis and published by CRC Press. This book was released on 2004-07-01 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference brought together specialists in cyclic soil behaviour in order to discuss important results and new ideas in the field, and to share expertise in design of various problems involving cyclic or dynamic behaviour of soils. This book covers a variety of topics: * Theory and analysis, including constitutive relations of soil under cyclic loading, post-seismic stability analysis of soil/structure, dynamic stability of structures, liquefaction analysis of marine structures due to cyclic loading, and more * Cyclic and dynamic laboratory and model testing, centrifuge testing and in-situ testing. * Numerical analysis, including computer methods * Design of industrial applications and marine structures, installation methods of piles, vibrocompaction, densification of ballast in railway structures, case studies of earthquakes and post-liquefaction observations.

Download or read book Numerical Models in Geomechanics written by G.N. Pande and published by CRC Press. This book was released on 2020-12-17 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume a number of developments on a variety of topics have been reported. These topics include: partially saturated soil; instabilities in soil behaviour; environmental geomechanics; parallel computing; and applications to tunnels, embankments, slopes, foundations and anchors.