Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 22 (thesis year 1977) a total of 10,658 theses titles from 28 Canadian and 227 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 22 reports theses submitted in 1977, on occasion, certain universities do report theses submitted in previous years but not reported at the time.

Download or read book Seismic Design of Reinforced Concrete Buildings written by Jack Moehle and published by McGraw Hill Professional. This book was released on 2014-10-06 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete coverage of earthquake-resistant concrete building design Written by a renowned seismic engineering expert, this authoritative resource discusses the theory and practice for the design and evaluation of earthquakeresisting reinforced concrete buildings. The book addresses the behavior of reinforced concrete materials, components, and systems subjected to routine and extreme loads, with an emphasis on response to earthquake loading. Design methods, both at a basic level as required by current building codes and at an advanced level needed for special problems such as seismic performance assessment, are described. Data and models useful for analyzing reinforced concrete structures as well as numerous illustrations, tables, and equations are included in this detailed reference. Seismic Design of Reinforced Concrete Buildings covers: Seismic design and performance verification Steel reinforcement Concrete Confined concrete Axially loaded members Moment and axial force Shear in beams, columns, and walls Development and anchorage Beam-column connections Slab-column and slab-wall connections Seismic design overview Special moment frames Special structural walls Gravity framing Diaphragms and collectors Foundations

Download or read book Building Code Requirements for Structural Concrete ACI 318 05 and Commentary ACI 318R 05 written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete Structures written by Robert Park and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets out basic theory for the behavior of reinforced concrete structural elements and structures in considerable depth. Emphasizes behavior at the ultimate load, and, in particular, aspects of the seismic design of reinforced concrete structures. Based on American practice, but also examines European practice.

Download or read book Minimum Design Loads for Buildings and Other Structures written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2000 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Civil Engineering Structures written by Laszlo P. Kollar and published by Woodhead Publishing. This book was released on 2020-10-20 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practicing engineers designing civil engineering structures, and advanced students of civil engineering, require foundational knowledge and advanced analytical and empirical tools. Mechanics in Civil Engineering Structures presents the material needed by practicing engineers engaged in the design of civil engineering structures, and students of civil engineering. The book covers the fundamental principles of mechanics needed to understand the responses of structures to different types of load and provides the analytical and empirical tools for design. The title presents the mechanics of relevant structural elements—including columns, beams, frames, plates and shells—and the use of mechanical models for assessing design code application. Eleven chapters cover topics including stresses and strains; elastic beams and columns; inelastic and composite beams and columns; temperature and other kinematic loads; energy principles; stability and second-order effects for beams and columns; basics of vibration; indeterminate elastic-plastic structures; plates and shells. This book is an invaluable guide for civil engineers needing foundational background and advanced analytical and empirical tools for structural design. - Includes 110 fully worked-out examples of important problems and 130 practice problems with an interaction solution manual (http://hsz121.hsz.bme.hu/solutionmanual) - Presents the foundational material and advanced theory and method needed by civil engineers for structural design - Provides the methodological and analytical tools needed to design civil engineering structures - Details the mechanics of salient structural elements including columns, beams, frames, plates and shells - Details mechanical models for assessing the applicability of design codes

Download or read book Inelastic Analysis of Solids and Structures written by M. Kojic and published by Springer Science & Business Media. This book was released on 2005-07-28 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inelastic Analysis of Solids and Structures presents in a unified manner the physical and theoretical background of inelastic material models and computational methods, and illustrates the behavior of the models in typical engineering conditions. The book describes experimental observations and principles of mechanics, and efficient computational algorithms for stress calculations as typically performed in finite element analysis. The theoretical background is given to an extent necessary to describe the commonly employed material models in metal isotropic and orthotropic plasticity, thermoplasticity and viscoplasticity, and the plasticity of geological materials. The computational algorithms are developed in a unified manner with some detailed derivations of the algorithmic relations. Many solved examples are presented, which are designed to give insight into the material behavior in various engineering conditions, and to demonstrate the application of the computational algorithms.

Download or read book Guidelines for earthquake resistant non engineered construction written by Arya, Anand S and published by UNESCO. This book was released on 2014-08-25 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Developments in the Formulation and Reinforcement of Concrete written by Sidney Mindess and published by Woodhead Publishing. This book was released on 2019-06-14 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in the Formulation and Reinforcement of Concrete, Second Edition, presents the latest developments on topics covered in the first edition. In addition, it includes new chapters on supplementary cementitious materials, mass concrete, the sustainably of concrete, service life prediction, limestone cements, the corrosion of steel in concrete, alkali-aggregate reactions, and concrete as a multiscale material. The book's chapters introduce the reader to some of the most important issues facing today's concrete industry. With its distinguished editor and international team of contributors, users will find this to be a must-have reference for civil and structural engineers. - Summarizes a wealth of recent research on structural concrete, including material microstructure, concrete types, and variation and construction techniques - Emphasizes concrete mixture design and applications in civil and structural engineering - Reviews modern concrete materials and novel construction systems, such as the precast industry and structures requiring high-performance concrete

Download or read book High Strength Concrete written by Natalie A. Lloyd and published by . This book was released on 1993 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design of Reinforced Concrete and Masonry Buildings written by Thomas Paulay and published by Wiley-Interscience. This book was released on 1992-04-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes actual structural design, not analysis, of multistory buildings for seismic resistance. Strong emphasis is placed on specific detailing requirements for construction. Fundamental design principles are presented to create buildings that respond to a wide range of potential seismic forces, which are illustrated by numerous detailed examples. The discussion includes the design of reinforced concrete ductile frames, structural walls, dual systems, reinforced masonry structures, buildings with restricted ductility and foundation walls. In addition to the examples, full design calculations are given for three prototype structures.

Download or read book Elements of Earthquake Engineering and Structural Dynamics written by André Filiatrault and published by Presses inter Polytechnique. This book was released on 2013 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In order to reduce the seismic risk facing many densely populated regions worldwide, including Canada and the United States, modern earthquake engineering should be more widely applied. But current literature on earthquake engineering may be difficult to grasp for structural engineers who are untrained in seismic design. In addition no single resource addressed seismic design practices in both Canada and the United States until now. Elements of Earthquake Engineering and Structural Dynamics was written to fill the gap. It presents the key elements of earthquake engineering and structural dynamics at an introductory level and gives readers the basic knowledge they need to apply the seismic provisions contained in Canadian and American building codes."--Résumé de l'éditeur.

Download or read book Perspectives on European Earthquake Engineering and Seismology written by Atilla Ansal and published by Springer. This book was released on 2015-08-28 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects 4 keynote and 15 theme lectures presented at the 2nd European Conference on Earthquake Engineering and Seismology (2ECEES), held in Istanbul, Turkey, from August 24 to 29, 2014. The conference was organized by the Turkish Earthquake Foundation - Earthquake Engineering Committee and Prime Ministry, Disaster and Emergency Management Presidency under the auspices of the European Association for Earthquake Engineering (EAEE) and European Seismological Commission (ESC). The book’s nineteen state-of-the-art chapters were written by the most prominent researchers in Europe and address a comprehensive collection of topics on earthquake engineering, as well as interdisciplinary subjects such as engineering seismology and seismic risk assessment and management. Further topics include engineering seismology, geotechnical earthquake engineering, seismic performance of buildings, earthquake-resistant engineering structures, new techniques and technologies, and managing risk in seismic regions. The book also presents the First Professor Inge Lehmann Distinguished Award Lecture given by Prof. Shamita Das in honor of Prof. Dr. Inge Lehmann. The aim of this work is to present the state-of-the art and latest practices in the fields of earthquake engineering and seismology, with Europe’s most respected researchers addressing recent and ongoing developments while also proposing innovative avenues for future research and development. Given its cutting-edge conten t and broad spectrum of topics, the book offers a unique reference guide for researchers in these fields. Audience: This book is of interest to civil engineers in the fields of geotechnical and structural earthquake engineering; scientists and researchers in the fields of seismology, geology and geophysics. Not only scientists, engineers and students, but also those interested in earthquake hazard assessment and mitigation will find in this book the most recent advances.

Download or read book Fiber Reinforced Cementitious Materials Volume 211 written by Sidney Mindess and published by Mrs Proceedings. This book was released on 1991-05-31 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.

Download or read book Seismic Rehabilitation Methods for Existing Buildings written by Reza Mokarram Aydenlou and published by Butterworth-Heinemann. This book was released on 2020-08-01 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Rehabilitation Methods for Existing Buildings covers various structures, effective parameters in seismic improvement, and other factors in seismic loading in eight applied chapters with descriptive classification. The book offers guidance for a seismic rehabilitation project based on the interpretation of publications FEMA and Iranian seismic rehabilitation regulations no.360 . It includes real examples of completed and approved projects to stabilize the seismic improvement issues of existing buildings. Six perfectly executed examples, with complete refinement details, such as modeling, step-by-step improvement studies, and executive plans and seismic enhancement images are included. The book also explains the classification of non-structural element and how to carry out it's seismic reconstruction studies and in one of the chapters, construction and soil improvement methods are discussed along with a practical example.The concepts of seismic rehabilitation in this book are presented with an Info-graphic structure that better fixes the concepts in the minds of readers so that when they face a new project, they have a more practical use of the content - Provides a fully functional way to evaluate, model and present details of a seismic rehabilitation plan for a building - Presents real seismic refurbishment models and step-by-step methods for providing examples (including images, tables and charts)

Download or read book Basic Earthquake Engineering written by Halûk Sucuoğlu and published by Springer. This book was released on 2014-05-09 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides senior undergraduate students, master students and structural engineers who do not have a background in the field with core knowledge of structural earthquake engineering that will be invaluable in their professional lives. The basics of seismotectonics, including the causes, magnitude, and intensity of earthquakes, are first explained. Then the book introduces basic elements of seismic hazard analysis and presents the concept of a seismic hazard map for use in seismic design. Subsequent chapters cover key aspects of the response analysis of simple systems and building structures to earthquake ground motions, design spectrum, the adoption of seismic analysis procedures in seismic design codes, seismic design principles and seismic design of reinforced concrete structures. Helpful worked examples on seismic analysis of linear, nonlinear and base isolated buildings, earthquake-resistant design of frame and frame-shear wall systems are included, most of which can be solved using a hand calculator.

Download or read book Structural Cross Sections written by Naveed Anwar and published by Butterworth-Heinemann. This book was released on 2016-11-08 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Cross Sections: Analysis and Design provides valuable information on this key subject covering almost all aspects including theoretical formulation, practical analysis and design computations, various considerations and issues related to cross-sectional behavior, and computer applications for determination of cross-sectional response. The presented approach can handle all complex shapes, material behaviors and configurations. The book starts with a clear and rigorous overview of role of cross-sections and their behavior in overall structural design process. Basic aspects of structural mechanics are reviewed and procedures to determine basic cross-sectional properties, stress and strain distributions, stress resultants and other response parameters, are provided. A brief discussion about the role of material behavior in cross-sectional response is also included. The unified and integrated approach to determine axial-flexural capacity of cross-sections is utilized in development of P-M and M-M interaction diagrams of cross-sections of various shapes. The behavior and design of cross-sections subjected to shear and torsion is also included with emphasis on reinforced concrete sections. Several detailed flow charts are included to demonstrate the procedures used in ACI, BS and Euro codes for design of cross-section subjected to shear and torsion, followed by solved examples. The book also presents the discussion about various factors that can lead to ductile response of cross-sections, especially those made of reinforced concrete. The definition and development of action-deformation curves especially moment-curvature (-) curve is discussed extensively. Various factors such as confinement, rebar distribution and axial load effect on the ductility are shown through examples. The use of moment-curvature curve to compute various section response parameters is also explained though equations and examples. Several typical techniques and materials for retrofitting of cross-sections of reinforced concrete beams, columns and slabs etc. are reviewed. A brief discussion of various informative references related to the evaluation and retrofitting of structures is included for practical applications. Towards the end, the book provides an overview of various software applications available for cross-section design and analysis. A framework for the development of a general-purpose cross-section analysis software, is presented and various features of few commercially available software packages are compared using some example cross-sections.