Download or read book The Behaviour and Design of Steel Structures to EC3 written by N.S. Trahair and published by CRC Press. This book was released on 2017-12-21 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fully revised fourth edition of this successful textbook fills a void which will arise when British designers start using the European steel code EC3 instead of the current steel code BS5950. The principal feature of the forth edition is the discussion of the behaviour of steel structures and the criteria used in design according to the British version of EC3. Thus it serves to bridge the gap which too often occurs when attention is concentrated on methods of analysis and the sizing of structural components. Because emphasis is placed on the development of an understanding of behaviour, many analytical details are either omitted in favour of more descriptive explanations, or are relegated to appendices. The many worked examples both illustrate the behaviour of steel structures and exemplify details of the design process. The Behaviour and Design of Steel Structures to EC3 is a key text for senior undergraduate and graduate students, and an essential reference tool for practising structural engineers in the UK and other countries.

Download or read book Behaviour and Design of Steel Structures to BS 5950 written by Mark A Bradford and published by CRC Press. This book was released on 2002-12-24 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this successful textbook is concerned specifically with the design of steel structures to the British Standard BS 5950. Thoroughly revised and updated in accordance with the latest 2000 amendment to Part 1 of the standard, it discusses all aspects of the behaviour of steel structures, and criteria used in their design. With copious worked examples, The Behaviour and Design of Steel Structures to BS 5950 is an ideal course textbook for senior undergraduate students, and will also provide a useful reference source for the practising engineer.

Download or read book Advanced Analysis in Steel Frame Design written by Andrea Eden Surovek and published by Amer Society of Civil Engineers. This book was released on 2012 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents formal guidelines for the use of second-order inelastic analysis in the design and assessment of steel framing systems.

Download or read book Semi rigid Connections Handbook written by Wai-Fah Chen and published by J. Ross Publishing. This book was released on 2011 with total page 1263 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and accessible introduction to the implementation of partially restrained connections in engineering practice.

Download or read book Theory and Design of Seismic Resistant Steel Frames written by Federico Mazzolani and published by CRC Press. This book was released on 2012-09-10 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art summary of recent developments in the behaviour, analysis and design of seismic resistant steel frames. Much more than a simple background volume, it gives the most recent results which can be used in the near future to improve the codified recommendations for steel structures in seismic zones. It contains new material which cann

Download or read book Behavior and analysis of reinforced concrete structures under alternate actions inducing inelastic response written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1994-05-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design of Reinforced Concrete Buildings written by Jack Moehle and published by McGraw Hill Professional. This book was released on 2014-10-06 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete coverage of earthquake-resistant concrete building design Written by a renowned seismic engineering expert, this authoritative resource discusses the theory and practice for the design and evaluation of earthquakeresisting reinforced concrete buildings. The book addresses the behavior of reinforced concrete materials, components, and systems subjected to routine and extreme loads, with an emphasis on response to earthquake loading. Design methods, both at a basic level as required by current building codes and at an advanced level needed for special problems such as seismic performance assessment, are described. Data and models useful for analyzing reinforced concrete structures as well as numerous illustrations, tables, and equations are included in this detailed reference. Seismic Design of Reinforced Concrete Buildings covers: Seismic design and performance verification Steel reinforcement Concrete Confined concrete Axially loaded members Moment and axial force Shear in beams, columns, and walls Development and anchorage Beam-column connections Slab-column and slab-wall connections Seismic design overview Special moment frames Special structural walls Gravity framing Diaphragms and collectors Foundations

Download or read book Moment Resistant Connections of Steel Frames in Seismic Areas written by Federico Mazzolani and published by CRC Press. This book was released on 2000-04-27 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: An unexpected brittle failure of connections and of members occurred during the last earthquakes of Northridge and Kobe. For this reason a heightened awareness developed in the international scientific community, particularly in the earthquake prone countries of the Mediterranean and Eastern Europe, of the urgent need to investigate this topic. The contents of this volume result from a European project dealing with the 'Reliability of moment resistant connections of steel frames in seismic areas' (RECOS), developed between 1997 and 1999 within the INCO-Copernicus joint research projects of the 4th Framework Program. The 30 month project focused on five key areas: *Analysis and syntheses of research results, including code provisos, in relation with the evidence of the Northridge and Kobe earthquakes; *Identification and evaluation through experimental means of the structural performance of beam-to-column connections under cyclic loading; *Setting up of sophisticated models for interpreting the connection response; *Numerical study on the connection influence on the seismic response of steel buildings; *Assessment of new criteria for selecting the behaviour factor for different structural schemes and definition of the corresponding range of validity in relation of the connection typologies.

Download or read book Advanced Analysis and Design of Steel Frames written by Gou-Qiang Li and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel frames are used in many commercial high-rise buildings, as well as industrial structures, such as ore mines and oilrigs. Enabling construction of ever lighter and safer structures, steel frames have become an important topic for engineers. This book, split into two parts covering advanced analysis and advanced design of steel frames, guides the reader from a broad array of frame elements through to advanced design methods such as deterministic, reliability, and system reliability design approaches. This book connects reliability evaluation of structural systems to advanced analysis of steel frames, and ensures that the steel frame design described is founded on system reliability. Important features of the this book include: fundamental equations governing the elastic and elasto-plastic equilibrium of beam, sheer-beam, column, joint-panel, and brace elements for steel frames; analysis of elastic buckling, elasto-plastic capacity and earthquake-excited behaviour of steel frames; background knowledge of more precise analysis and safer design of steel frames against gravity and wind, as well as key discussions on seismic analysis. theoretical treatments, followed by numerous examples and applications; a review of the evolution of structural design approaches, and reliability-based advanced analysis, followed by the methods and procedures for how to establish practical design formula. Advanced Design and Analysis of Steel Frames provides students, researchers, and engineers with an integrated examination of this core civil and structural engineering topic. The logical treatment of both advanced analysis followed by advanced design makes this an invaluable reference tool, comprising of reviews, methods, procedures, examples, and applications of steel frames in one complete volume.

Download or read book Structural Stability of Steel written by Theodore V. Galambos and published by John Wiley & Sons. This book was released on 2008-04-18 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical guide to structural stability theory for the design of safe steel structures Not only does this book provide readers with a solid foundation in structural stability theory, it also offers them a practical, working knowledge of how this theory translates into design specifications for safe steel structures. Structural Stability of Steel features detailed discussions of the elastic and inelastic stability of steel columns, beams, beam-columns, and frames alongside numerous worked examples. For each type of structural member or system, the authors set forth recommended design rules with clear explanations of how they were derived. Following an introduction to the principles of stability theory, the book covers: * Stability of axially loaded planar elastic systems * Tangent-modulus, reduced-modulus, and maximum strength theories * Elastic and inelastic stability limits of planar beam-columns * Elastic and inelastic instability of planar frames * Out-of-plane, lateral-torsional buckling of beams, columns, and beam-columns The final two chapters focus on the application of stability theory to the practical design of steel structures, with special emphasis on examples based on the 2005 Specification for Structural Steel Buildings of the American Institute of Steel Construction. Problem sets at the end of each chapter enable readers to put their newfound knowledge into practice by solving actual instability problems. With its clear logical progression from theory to design implementation, this book is an ideal textbook for upper-level undergraduates and graduate students in structural engineering. Practicing engineers should also turn to this book for expert assistance in investigating and solving a myriad of stability problems.

Download or read book Reinforced Concrete Beams Columns and Frames written by Jostein Hellesland and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). A previous book, entitled Reinforced Concrete Beams, Columns and Frames – Mechanics and Design, deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS), whereas the current book deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Advanced Design at Ultimate Limit State (ULS). 2. Slender Compression Members – Mechanics and Design. 3. Approximate Analysis Methods. Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX.

Download or read book Non Linear Static and Cyclic Analysis of Steel Frames with Semi Rigid Connections written by Siu-Lai Chan and published by Elsevier. This book was released on 2000-05-19 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.

Download or read book Advanced Analysis of Steel Frames written by W.F. Chen and published by CRC Press. This book was released on 2018-01-18 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of the limit state approach to design in recent years has focused particular attention on two basic requirements: accurate information regarding the behavior of structures throughout the entire range of loading up to the ultimate strength, and simple practical procedures to enable engineers to assess this behavior. This book satisfies these requirements by providing practical analysis methods for the design of steel frames. The book contains a wide range of second-order analyses: from elastic to inelastic, rigid to semi-rigid connections, and simple plastic hinge method to sophisticated plastic-zone method. Computer programs for each analysis are provided in the form of a floppy disk for easy implementation. Sample problems are described and user's manuals are well documented for each program developed in the book.

Download or read book Stability Design of Semi Rigid Frames written by W. F. Chen and published by John Wiley & Sons. This book was released on 1995-12-12 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semi-rigid steel frames are revolutionizing structural design. This book is a practical professional reference, covering analytical methods for the evaluation of connection flexibility and its influence on the stability of the entire framework. The methods range from a simplified member-by-member design approach to a more sophisticated computer-based advanced analysis and design approach.

Download or read book Ductility of Seismic Resistant Steel Structures written by Victor Gioncu and published by CRC Press. This book was released on 2003-09-02 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a state-of-the-art report on the ductility of steel structures, containing a comprehensive review of the technical literature available, and presenting the results of the authors' own extensive research activities in this area. Analytical and numerical methods are described, and a wealth of practical information is provided. Ductility

Download or read book CONCRETE Innovations in Materials Design and Structures written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2019-05-27 with total page 2322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains the papers of the fib Symposium “CONCRETE Innovations in Materials, Design and Structures”, which was held in May 2019 in Kraków, Poland. This annual symposium was co-organised by the Cracow University of Technology. The topics covered include Analysis and Design, Sustainability, Durability, Structures, Materials, and Prefabrication. The fib, Fédération internationale du béton, is a not-for-profit association formed by 45 national member groups and approximately 1000 corporate and individual members. The fib’s mission is to develop at an international level the study of scientific and practical matters capable of advancing the technical, economic, aesthetic and environmental performance of concrete construction. The fib, was formed in 1998 by the merger of the Euro-International Committee for Concrete (the CEB) and the International Federation for Prestressing (the FIP). These predecessor organizations existed independently since 1953 and 1952, respectively.

Download or read book Constructional Steel Design written by P.J. Dowling and published by CRC Press. This book was released on 2005-12-20 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of the papers presented at the First World Conference on Constructional Steel Design held in Acapulco, Mexico, December 1992. The Conference provided a forum for presentation and discussion by designers and research workers involved with steel construction.