Download or read book Behavior of Metals at Low Temperatures written by American Society for Metals and published by . This book was released on 1953 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials at Low Temperatures written by Richard Palmer Reed and published by ASM International(OH). This book was released on 1983 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties of Materials at Low Temperatures written by D. Wigley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: In writing this monograph, the aim has been to consider the mechanical properties of the wide range of materials now available in such a way as to start with the fundamental nature of these properties and to follow the discussion through to the point at which the reader is able to comprehend the significance or otherwise of the large amounts of data now available in design manuals and other compilations. In short, it is hoped that this volume will be used as a companion to these data compilations and as an aid to their interpretation. In attempting to cover such a wide field, a large degree of selection has been necessary, as complete volumes have been written on topics which here have had to be covered in a few pages or less. It is inevitable that not everyone will agree with the choice made, especially if it is his own subject which has been discussed rather briefly, and the author accepts full res ponsibility for the selection made. The book is written at a level which should be easily followed by a university graduate in science or engineer ing, although, if his background has not included a course in materials science, some groundwork may be lacking.
Download or read book Mechanical Properties of Metals at Low Temperatures written by U. S. National Bureau of Standards and published by Forgotten Books. This book was released on 2017-11-17 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Mechanical Properties of Metals at Low Temperatures: Proceedings of the Nbs Semicentennial Symposium on Mechanical Properties of Metals at Low Temperatures, Held at the Nbs on May 14 and 15, 1951 A brief account is given of work in Europe since 1940 on the mechanical properties of metals at low temperatures. Elasticity and plasticity are dealt with, and the development of brittleness at low temperatures is discussed in relation to brittle fracture in mild steel, the behavior of heat-treated alloy steels at temperatures prevailing in the stratosphere, and the reliability of austenitic steels at liquid-air temperature. The properties at low temperatures of pure alloys of iron made at the National Physical Laboratory are described, and it is shown that some alloying additions exert influences on the rupture strength that are independent of their influence on the resistance to plastic deformation. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Mechanical Properties of Metals at Low Temperatures written by United States. National Bureau of Standards and published by . This book was released on 1952 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Symposium on Effect of Temperature on the Brittle Behavior of Metals with Particular Reference to Low Temperatures written by American Society for Testing Materials and published by . This book was released on 1954 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Behavior of Materials at Cryogenic Temperatures written by and published by . This book was released on 1966 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Bibliography on Effect of Temperature on Properties of Metals written by American Society of Mechanical Engineers and published by . This book was released on 1928 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue at Low Temperatures written by Ralph Ivan Stephens and published by ASTM International. This book was released on 1985 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Austenitic Steels at Low Temperatures written by T. Horiuchi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for alternate energy sources has led to the develop ment of prototype fusion and MHD reactors. Both possible energy systems in current designs usually require the use of magnetic fields for plasma confinement and concentration. For the creation and maintenance of large 5 to 15 tesla magnetic fields, supercon ducting magnets appear more economical. But the high magnetic fields create large forces, and the complexities of the conceptual reactors create severe space restrictions. The combination of re quirements, plus the desire to keep construction costs at a mini mum, has created a need for stronger structural alloys for service at liquid helium temperature (4 K). The complexity of the required structures requires that these alloys be weldable. Furthermore, since the plasma is influenced by magnetic fields and since magnet ic forces from the use of ferromagnetic materials in many configur ations may be additive, the best structural alloy for most applica tions should be nonmagnetic. These requirements have led to consideration of higher strength austenitic steels. Strength increases at low temperatures are achieved by the addition of nitrogen. The stability of the austenitic structure is retained by adding manganese instead of nickel, which is more expensive. Research to develop these higher strength austenitic steels is in process, primarily in Japan and the United States.
Download or read book Low Temperature Properties of Selected Materials written by Dorothea M. Johnson and published by . This book was released on 1977 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is a bibliography of the work reported in the literature on the effects of low temperature on the properties of structural materials. Some of the newer areas of cryogenic technology such as superconducting machinery involve environments which may subject the components to temperature as low as 4 K. Exposure of structural materials to such low temperatures affects their properties. This bibliography contains 963 references published between 1950-1976, arranged in chronological/alphabetical order. Combined material/property indexes are provided. (Author).
Download or read book Mechanical Properties of Structural Materials at Low Temperatures written by Ralph Michael McClintock and published by . This book was released on 1960 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Specific Heats at Low Temperatures written by Erode Gopal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work was begun quite some time ago at the University of Oxford during the tenure of an Overseas Scholarship of the Royal Commission for the Exhibition of 1851 and was completed at Banga lore when the author was being supported by a maintenance allowance from the CSIR Pool for unemployed scientists. It is hoped that significant developments taking place as late as the beginning of 1965 have been incorporated. The initial impetus and inspiration for the work came from Dr. K. Mendelssohn. To him and to Drs. R. W. Hill and N. E. Phillips, who went through the whole of the text, the author is obliged in more ways than one. For permission to use figures and other materials, grateful thanks are tendered to the concerned workers and institutions. The author is not so sanguine as to imagine that all technical and literary flaws have been weeded out. If others come across them, they may be charitably brought to the author's notice as proof that physics has become too vast to be comprehended by a single onlooker. E. S. RAJA GoPAL Department of Physics Indian Institute of Science Bangalore 12, India November 1965 v Contents Introduction ................................................................. .
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion Understanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world’s leading investigators. · Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials · Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures · Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Download or read book Thermal Properties of Solids at Room and Cryogenic Temperatures written by Guglielmo Ventura and published by Springer. This book was released on 2014-06-23 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The minimum temperature in the natural universe is 2.7 K. Laboratory refrigerators can reach temperatures in the microkelvin range. Modern industrial refrigerators cool foods at 200 K, whereas space mission payloads must be capable of working at temperatures as low as 20 K. Superconducting magnets used for NMR work at 4.2 K. Hence the properties of materials must be accurately known also at cryogenic temperatures. This book provides a guide for engineers, physicists, chemists, technicians who wish to approach the field of low-temperature material properties. The focus is on the thermal properties and a large spectrum of experimental cases is reported. The book presents updated tables of low-temperature data on materials and a thorough bibliography supplements any further research. Key Features include: ° Detailed technical description of experiments ° Description of the newest cryogenic apparatus ° Offers data on cryogenic properties of the latest new materials ° Current reference review
Download or read book Symposium on Effect of Temperature on the Properties of Metals written by American Society of Mechanical Engineers and published by ASTM International. This book was released on 1931 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact Resistance and Tensile Properties of Metals at Sub atmospheric Temperatures written by Joint Research Committee on the Effect of Temperature on the Properties of Metals and published by . This book was released on 1941 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
