Download or read book Behavior of Materials Under Intense Dynamic Loads written by L. P. Orlenko and published by . This book was released on 1970 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems of impact compressibility in solid bodies and variations in the mechanical properties of materials under dynamic loading are discussed. Certain problems of stress-wave propagation in dense media, of dynamic deformation in thin-walled shells, and of modeling are examined during intense short-term loads. (Author).

Download or read book Material Properties under Intensive Dynamic Loading written by Mikhail V. Zhernokletov and published by Springer Science & Business Media. This book was released on 2007-07-16 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the physical and thermomechanical response of materials subjected to intensive dynamic loading is a challenge of great significance in engineering today. This volume assumes the task of gathering both experimental and diagnostic methods in one place, since not much information has been previously disseminated in the scientific literature.

Download or read book Behavior of Materials under Impact Explosion High Pressures and Dynamic Strain Rates written by Maxim Yu. Orlov and published by Springer Nature. This book was released on 2022-10-31 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the results of experimental and theoretical studies of the destruction of solids under impact, explosion, high pressures, and strain rates. The content identifies the basic laws of the destruction of bodies under dynamic loads. The results of numerical studies were obtained using numerical methods on the Lagrangian, Euler, and ALE approaches to the description of the motion of continuous media. Numerical methods and mathematical models have been tested by comparison with experimental data and well-known analytical solutions (for instance, Rankin–Hugoniot laws). Experimental studies were performed on unique ballistic installations with the registration of fast processes (high-speed shooting). The results are used as new tests to verify the developing modeling methods. The research objects were metal multilayer plates, functionally graded materials, advanced, smart, and natural materials, etc. The book is interesting to specialists in the field of mathematical modeling and experimental methods for studying fast processes under dynamic loading.

Download or read book Intense Dynamic Loading Of Condensed Matter written by A. V. Bushman and published by CRC Press. This book was released on 1992-12-01 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the science and technology necessary to understand, predict, and simulate the phenomena associated with intense dynamic loading of matter. The book begins with background information on shock wave phenomena in materials and how they are measured. This includes materials with strength, materials undergoing dynamic phase transformations, and material fracturing. The authors then cover the phenomena associated with detonations, where the chemical energy release of an explosive is an integral part of the hydrodynamics and describe the formation and application of the semi-empirical equation of state. They develop the numerical techniques for doing realistic computer simulations of complicated dynamical processes associated with impacts. The book closes with reviews simulations, compared with experiments, for a variety of dynamic loading events, including laser and electron beam interactions with metals, high explosive loading of iron, and impacts of cometary dust on the Vega space probe as it crossed the tail of Hailey's comet.

Download or read book Dynamics of Heterogeneous Materials written by Vitali Nesterenko and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph deals with the behavior of essentially nonlinear heterogeneous materials in processes occurring under intense dynamic loading, where microstructural effects play the main role. This book is not an introduction to the dynamic behavior of materials, and general information available in other books is not included. The material herein is presented in a form I hope will make it useful not only for researchers working in related areas, but also for graduate students. I used it successfully to teach a course on the dynamic behavior of materials at the University of California, San Diego. Another course well suited to the topic may be nonlinear wave dynamics in solids, especially the part on strongly nonlinear waves. About 100 problems presented in the book at the end of each chapter will help the reader to develop a deeper understanding of the subject. I tried to follow a few rules in writing this book: (1) To focus on strongly nonlinear phenomena where there is no small parameter with respect to the amplitude of disturbance, including solitons, shock waves, and localized shear. (2) To take into account phenomena sensitive to materials structure, where typical space scale of material parameters (particle size, cell size) are presented in the models or are variable in experimental research.

Download or read book Dynamic Behavior of Materials Volume 1 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-27 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Download or read book Dynamics of Materials written by Lili Wang and published by Academic Press. This book was released on 2019-07-25 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics of Materials: Experiments, Models and Applications addresses the basic laws of high velocity flow/deformation and dynamic failure of materials under dynamic loading. The book comprehensively covers different perspectives on volumetric law, including its macro-thermodynamic basis, solid physics basis, related dynamic experimental study, distortional law, including the rate-dependent macro-distortional law reflecting strain-rate effect, its micro-mechanism based on dislocation dynamics, and dynamic experimental research based on the stress wave theory. The final section covers dynamic failure in relation to dynamic damage evolution, including the unloading failure of a crack-free body, dynamics of cracks under high strain-rate, and more. Covers models for applications, along with the fundamentals of the mechanisms behind the models Tackles the difficult interdisciplinary nature of the subject, combining macroscopic continuum mechanics with thermodynamics and macro-mechanics expression with micro-physical mechanisms Provides a review of the latest experimental methods for the equation of state for solids under high pressure and the distortional law under high strain-rates of materials

Download or read book Damaging Effects of Weapons and Ammunition written by Igor A. Balagansky and published by John Wiley & Sons. This book was released on 2022-05-03 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of weapon damage effects on a variety of objects Damaging Effects of Weapons and Ammunition delivers a thorough exploration of a range of issues related to the effects of ammunition and weapons. The book includes coverage of the basic concepts of the theory of efficiency and the physical foundations of the functional and damaging effects of fragments, shaped charges, high-explosive and penetrating weapons. The author discusses the calculation formulas used to evaluation the parameters of damage fields and their interaction with various objects. Additionally, the book expands on the damage criteria of weapons, the characteristics of the vulnerability of objects with respect to a variety of damaging factors, dependencies for assessing safe distances, and the resistance of various structures to the effects of explosion and impact. Damaging Effects of Weapons and Ammunition also offers: Detailed calculation methods indicating areas of application and the necessary units of used quantities Extensive examples of classic designs of ammunition from around the world Discussions of the characterization of various types of ammunition, including high-explosive, fragment, penetrative, and shaped charges A chapter on the numerical simulation of high-speed processes Perfect for technical specialists working in the fields of explosion safety and explosives, Damaging Effects of Weapons and Ammunition also belongs in the libraries of researchers and students studying explosion phenomena, explosive technologies, explosion safety, and materials science.

Download or read book Introduction to Engineering Plasticity written by Tongxi Yu and published by Elsevier. This book was released on 2022-06-20 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of plasticity is a branch of solid mechanics that investigates the relationship between permanent deformation and load, and the distribution of stress and strains of materials and structures beyond their elastic limit. Engineering plasticity underpins the safety of many modern systems and structures. Realizing the full potential of materials as well as designing precise metal processing and energy absorption structures requires mastery of engineering plasticity. Introduction to Engineering Plasticity: Fundamentals with Applications in Metal Forming, Limit Analysis and Energy Absorption presents both fundamental theory on plasticity and emphasizes the latest engineering applications. The title combines theory and engineering applications of plasticity, elaborating on problem solving in real-world engineering tasks such as in metal forming, limit analysis of structures, and understanding the energy absorption of structures and materials. The five main parts of the book cover: Plastic properties of materials and their characterization; Fundamental theory in plasticity; Elastic-plastic problems and typical solutions; and Rigid-plastic problems under plane-stress conditions. This title provides students and engineers alike with the fundamentals and advanced tools needed in engineering plasticity. Brings together plasticity theory with engineering applications and problem solving Elaborates problem solving methods and demonstrates plasticity in various engineering fields Covers the recent decades of research on metal forming and limit analysis Includes energy absorption of new structures and materials where plasticity dominates analysis and design Gives a systematic account of the theory of plasticity alongside its engineering applications

Download or read book Behavior of Materials Under Dynamic Loading written by Norris J. Huffington and published by . This book was released on 1965 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Impact Dynamics written by T. X. Yu and published by John Wiley & Sons. This book was released on 2018-01-23 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental guidance—including concepts, models, and methodology—for better understanding the dynamic behavior of materials and for designing for objects and structures under impact or intensive dynamic loading This book introduces readers to the dynamic response of structures with important emphasis on the material behavior under dynamic loadings. It utilizes theoretical modelling and analytical methods in order to provide readers with insight into the various phenomena. The content of the book is an introduction to the fundamental aspects, which underpin many important industrial areas. These areas include the safety of various transportation systems and a range of different structures when subjected to various impact and dynamic loadings, including terrorist attacks. Presented in three parts—Stress Waves in Solids, Dynamic Behaviors of Materials Under High Strain Rate, and Dynamic Response of Structures to Impact and Pulse Loading—Introduction to Impact Dynamics covers elastic waves, rate dependent behaviors of materials, effects of tensile force, inertial effects, and more. The book also features numerous case studies to aid in facilitating learning. The strength of the book is its clarity, balanced coverage, and practical examples, which allow students to learn the overall knowledge of impact dynamics in a limited time whilst directing them to explore more advanced technical knowledge and skills. Considers both the dynamic behavior of materials and stress waves, and the dynamic structural response and energy absorption, emphasizing the interaction between material behavior and the structural response Provides a comprehensive description of the phenomenon of impact of structures, containing both fundamental issues of wave propagation and constitutive relation of materials, and the dynamic response of structures under impact loads Based on the authors’ research and teaching experience as well as updated developments in the field Introduction to Impact Dynamics is the perfect textbook for graduate and postgraduate students, and will work as a reference for engineers in the fields of solid mechanics, automotive design, aerospace, mechanical, nuclear, marine, and defense.

Download or read book Dynamic Behavior of Materials written by Marc A. Meyers and published by John Wiley & Sons. This book was released on 1994-10-28 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses fundamentals and advanced topics relevant to the behavior of materials under in-service conditions such as impact, shock, stress and high-strain rate deformations. Deals extensively with materials from a microstructure perspective which is the future direction of research today.

Download or read book Dynamic Behavior of Materials Volume 1 written by Bo Song and published by Springer Science & Business Media. This book was released on 2013-10-01 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the first volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: General Dynamic Material Properties Novel Dynamic Testing Techniques Dynamic Fracture and Failure Novel Testing Techniques Dynamic Behavior of Geo-materials Dynamic Behavior of Biological and Biomimetic Materials Dynamic Behavior of Composites and Multifunctional Materials Dynamic Behavior of Low-Impedance materials Multi-scale Modeling of Dynamic Behavior of Materials Quantitative Visualization of Dynamic Behavior of Materials Shock/Blast Loading of Materials

Download or read book Materials under Extreme Loadings written by Eric Buzaud and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent and cutting edge advances in our understanding of key aspects of the response of materials under extreme loads that take place during high velocity impact and penetration. The focus of the content is on the numerous challenges associated with characterization and modeling of complex interactions that occur during these highly dynamic events. The following specific topics, among others, are addressed: characterization of material behavior under extreme loadings (estimate of damage, effects related to moisture contents, large pressures, large strain rates, etc.); measurement of microstructural changes associated with damage and mesoscopic scale modeling; macroscopic modeling, using the framework of the theory of viscoplasticity and damage; modeling and simulation of localization, cracking, and dynamic fragmentation of materials; application to penetration mechanics and trajectory instabilities. The book gathers together selected papers based on work presented as invited lectures at the 2nd US-France symposium held on 28-30 May 2008 in Rocamadour, France. The conference was organized by Eric Buzaud (DGA, Centre d'Études de Gramat) under the auspices of the International Center for Applied Computational Mechanics (ICACM).

Download or read book Air Force Research Resum s written by and published by . This book was released on with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1986 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: