Download or read book Beginner s Guide to SOLIDWORKS 2018 Level I written by Alejandro Reyes and published by SDC Publications. This book was released on 2017-10 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help new users learn the basic concepts of SOLIDWORKS and good solid modeling techniques in an easy to follow guide that includes video instruction. It is a great starting point for those new to SOLIDWORKS or as a teaching aid in classroom training to become familiar with the software’s interface, basic commands and strategies as users complete a series of models while learning different ways to accomplish a particular task. At the end of this book, you will have a fairly good understanding of the SOLIDWORKS interface and the most commonly used commands for part modeling, assembly and detailing after completing a series of components and their 2D drawings complete with Bill of Materials. The book focuses on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. The author strived hard to include the commands required in the Certified SOLIDWORKS Associate and Certified SOLIDWORKS Professional Exams as listed on the SOLIDWORKS website. SOLIDWORKS is an easy to use CAD software that includes many time saving tools that will enable new and experienced users to complete design tasks faster than before. Most commands covered in this book have advanced options, which may not be covered in this book. This is meant to be a starting point to help new users to learn the basic and most frequently used commands. Includes Video Instruction Each copy of this book includes access to video instruction. In these videos the author provides a visual presentation of tutorials found in the book. The videos reinforce the steps described in the book by allowing you to watch the exact steps the author uses to complete the exercises.

Download or read book Beginner s Guide to SOLIDWORKS 2021 Level I written by Alejandro Reyes and published by SDC Publications. This book was released on 2021-01-15 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help new users learn the basic concepts of SOLIDWORKS and good solid modeling techniques in an easy to follow guide that includes video instruction. It is a great starting point for those new to SOLIDWORKS or as a teaching aid in classroom training to become familiar with the software’s interface, basic commands and strategies as users complete a series of models while learning different ways to accomplish a particular task. At the end of this book, you will have a fairly good understanding of the SOLIDWORKS interface and the most commonly used commands for part modeling, assembly and detailing after completing a series of components and their 2D drawings complete with Bill of Materials. The book focuses on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. Throughout this book the author introduces you to new commands that are required to pass the Certified SOLIDWORKS Associate exam, as listed on the SOLIDWORKS website. A dedicated chapter provides you with details about the exam, as well as a practice test to help you prepare for the actual exam. SOLIDWORKS is an easy to use CAD software that includes many time saving tools that will enable new and experienced users to complete design tasks faster than before. Most commands covered in this book have advanced options, which may not be covered in this book. This is meant to be a starting point to help new users to learn the basic and most frequently used commands.

Download or read book Beginner s Guide to SOLIDWORKS 2020 Level II written by Alejandro Reyes and published by SDC Publications. This book was released on 2020 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginner’s Guide to SOLIDWORKS 2020 – Level II starts where Beginner’s Guide – Level I ends, following the same easy to read style and companion videoinstruction, but this time covering advanced topics and techniques. The purpose of this book is to teach advanced techniques including sheet metal, surfacing, how to create components in the context of an assembly and reference other components (Top-down design), propagate design changes with SOLIDWORKS’ parametric capabilities, mold design, welded structures and more while explaining the basic concepts of each trade to allow you to understand the how and why of each operation. The author uses simple examples to allow you to better understand each command and environment, as well as to make it easier to explain the purpose of each step, maximizing the learning time by focusing on one task at a time. This book is focused on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. At the end of this book, you will have acquired enough skills to be highly competitive when it comes to designing with SOLIDWORKS, and while there are many less frequently used commands and options available that will not be covered in this book, rest assured that those covered are most of the commands used every day by SOLIDWORKS designers. The author strived hard to include many of the commands required in the Certified SOLIDWORKS Professional Advanced and Expert exams as listed on the SOLIDWORKS website.

Download or read book Beginner s Guide to SOLIDWORKS 2022 Level II written by Alejandro Reyes and published by SDC Publications. This book was released on with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginner’s Guide to SOLIDWORKS 2022 – Level II starts where Beginner’s Guide – Level I ends, following the same easy to read style and companion video instruction, but this time covering advanced topics and techniques. The purpose of this book is to teach advanced techniques including sheet metal, surfacing, how to create components in the context of an assembly and reference other components (Top-down design), propagate design changes with SOLIDWORKS’ parametric capabilities, mold design, welded structures and more while explaining the basic concepts of each trade to allow you to understand the how and why of each operation. The author uses simple examples to allow you to better understand each command and environment, as well as to make it easier to explain the purpose of each step, maximizing the learning time by focusing on one task at a time. This book is focused on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. At the end of this book, you will have acquired enough skills to be highly competitive when it comes to designing with SOLIDWORKS, and while there are many less frequently used commands and options available that will not be covered in this book, rest assured that those covered are most of the commands used every day by SOLIDWORKS designers. The author strived hard to include many of the commands required in the Certified SOLIDWORKS Professional Advanced and Expert exams as listed on the SOLIDWORKS website. Includes Video Instruction Each copy of this book includes access to video instruction. In these videos the author provides a clear presentation of tutorials found in the book. The videos reinforce the steps described in the book by allowing you to watch the exact steps the author uses to complete the exercises while he provides additional details along the way. Captioned versions of these videos are also available for customers who want or need video captions.

Download or read book Introduction to SolidWorks written by Godfrey C. Onwubolu and published by CRC Press. This book was released on 2017-03-03 with total page 1676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This senior undergraduate level textbook is written for Advanced Manufacturing, Additive Manufacturing, as well as CAD/CAM courses. Its goal is to assist students in colleges and universities, designers, engineers, and professionals interested in using SolidWorks as the design and 3D printing tool for emerging manufacturing technology for practical applications. This textbook will bring a new dimension to SolidWorks by introducing readers to the role of SolidWorks in the relatively new manufacturing paradigm shift, known as 3D-Printing which is based on Additive Manufacturing (AM) technology. This new textbook: Features modeling of complex parts and surfaces Provides a step-by-step tutorial type approach with pictures showing how to model using SolidWorks Offers a user-Friendly approach for the design of parts, assemblies, and drawings, motion-analysis, and FEA topics Includes clarification of connections between SolidWorks and 3D-Printing based on Additive Manufacturing Discusses a clear presentation of Additive Manufacturing for Designers using SolidWorks CAD software "Introduction to SolidWorks: A Comprehensive Guide with Applications in 3D Printing" is written using a hands-on approach which includes a significant number of pictorial descriptions of the steps that a student should follow to model parts, assemble parts, and produce drawings.

Download or read book SOLIDWORKS 2017 Tutorial with Video Instruction written by David Planchard and published by SDC Publications. This book was released on 2017 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2017 Tutorial with video instruction is written to assist students, designers, engineers and professionals who are new to SOLIDWORKS. The text provides a step-by-step project based learning approach. It also contains information and examples on the five categories, to take and understand the Certified Associate - Mechanical Design (CSWA) exam. The book is divided into three sections. Chapters 1 - 6 explore the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple machine parts, simple and complex assemblies, proper design intent, design tables, configurations, equations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. Chapters 7 - 10 prepare you for the Certified Associate - Mechanical Design (CSWA) exam. The certification indicates a foundation in and apprentice knowledge of 3D CAD and engineering practices and principles. View Chapter 11 on Additive Manufacturing (3D printing) and its benefits and features. Understand the terms and technology used in low cost 3D printers. Follow the step-by-step instructions and develop multiple assemblies that combine over 100 extruded machined parts and components. Formulate the skills to create, modify and edit sketches and solid features. Learn the techniques to reuse features, parts and assemblies through symmetry, patterns, copied components, apply proper design intent, design tables and configurations. Learn by doing, not just by reading. Desired outcomes and usage competencies are listed for each chapter. Know your objective up front. Follow the steps in each chapter to achieve your design goals. Work between multiple documents, features, commands, custom properties and document properties that represent how engineers and designers utilize SOLIDWORKS in industry.

Download or read book Beginner s Guide to SOLIDWORKS 2019 Level I written by Alejandro Reyes and published by SDC Publications. This book was released on 2018-09-24 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help new users learn the basic concepts of SOLIDWORKS and good solid modeling techniques in an easy to follow guide that includes video instruction. It is a great starting point for those new to SOLIDWORKS or as a teaching aid in classroom training to become familiar with the software’s interface, basic commands and strategies as users complete a series of models while learning different ways to accomplish a particular task. At the end of this book, you will have a fairly good understanding of the SOLIDWORKS interface and the most commonly used commands for part modeling, assembly and detailing after completing a series of components and their 2D drawings complete with Bill of Materials. The book focuses on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. The author strived hard to include the commands required in the Certified SOLIDWORKS Associate and Certified SOLIDWORKS Professional Exams as listed on the SOLIDWORKS website. SOLIDWORKS is an easy to use CAD software that includes many time saving tools that will enable new and experienced users to complete design tasks faster than before. Most commands covered in this book have advanced options, which may not be covered in this book. This is meant to be a starting point to help new users to learn the basic and most frequently used commands.

Download or read book Beginner s Guide to SOLIDWORKS 2017 Level II written by Alejandro Reyes and published by SDC Publications. This book was released on 2017-02 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginner’s Guide to SOLIDWORKS 2017 – Level II starts where Beginner’s Guide – Level I ends, following the same easy to read style and companion video instruction, but this time covering advanced topics and techniques. The purpose of this book is to teach advanced techniques including sheet metal, surfacing, how to create components in the context of an assembly and reference other components (Top-down design), propagate design changes with SOLIDWORKS’ parametric capabilities, mold design, welded structures and more while explaining the basic concepts of each trade to allow you to understand the how and why of each operation. The author uses simple examples to allow you to better understand each command and environment, as well as to make it easier to explain the purpose of each step, maximizing the learning time by focusing on one task at a time. This book is focused on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. At the end of this book, you will have acquired enough skills to be highly competitive when it comes to designing with SOLIDWORKS, and while there are many less frequently used commands and options available that will not be covered in this book, rest assured that those covered are most of the commands used every day by SOLIDWORKS designers. The author strived hard to include many of the commands required in the Certified SOLIDWORKS Professional Advanced and Expert exams as listed on the SOLIDWORKS website.

Download or read book Beginner s Guide to SolidWorks 2015 Level I written by Alejandro Reyes and published by SDC Publications. This book was released on 2015-01-14 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help new users learn the basic concepts of SolidWorks and good solid modeling techniques in an easy to follow guide that includes video instruction. It is a great starting point for those new to SolidWorks or as a teaching aid in classroom training to become familiar with the software’s interface, basic commands and strategies as users complete a series of models while learning different ways to accomplish a particular task. At the end of this book, you will have a fairly good understanding of the SolidWorks interface and the most commonly used commands for part modeling, assembly and detailing after completing a series of components and their 2D drawings complete with Bill of Materials. The book focuses on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. The author strived hard to include the commands required in the Certified SolidWorks Associate test as listed on the SolidWorks website, as well as several more. SolidWorks is an easy to use CAD software that includes many time saving tools that will enable new and experienced users to complete design tasks faster than before. Most commands covered in this book have advanced options, which may not be covered in this book. This is meant to be a starting point to help new users to learn the basic and most frequently used commands.

Download or read book Beginner s Guide to SOLIDWORKS 2022 Level I written by Alejandro Reyes and published by SDC Publications. This book was released on 2022 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help new users learn the basic concepts of SOLIDWORKS and good solid modeling techniques in an easy to follow guide that includes video instruction. It is a great starting point for those new to SOLIDWORKS or as a teaching aid in classroom training to become familiar with the software’s interface, basic commands and strategies as users complete a series of models while learning different ways to accomplish a particular task. At the end of this book, you will have a fairly good understanding of the SOLIDWORKS interface and the most commonly used commands for part modeling, assembly and detailing after completing a series of components and their 2D drawings complete with Bill of Materials. The book focuses on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. Throughout this book the author introduces you to new commands that are required to pass the Certified SOLIDWORKS Associate exam, as listed on the SOLIDWORKS website. A dedicated chapter provides you with details about the exam, as well as a practice test to help you prepare for the actual exam. SOLIDWORKS is an easy to use CAD software that includes many time saving tools that will enable new and experienced users to complete design tasks faster than before. Most commands covered in this book have advanced options, which may not be covered in this book. This is meant to be a starting point to help new users to learn the basic and most frequently used commands. Includes Video Instruction Each copy of this book includes access to video instruction. In these videos the author provides a clear presentation of tutorials found in the book. The videos reinforce the steps described in the book by allowing you to watch the exact steps the author uses to complete the exercises while he provides additional details along the way. Captioned versions of these videos are also available for customers who want or need video captions.

Download or read book Beginner s Guide to SOLIDWORKS 2019 Level II written by Alejandro Reyes and published by SDC Publications. This book was released on 2018-12-17 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginner’s Guide to SOLIDWORKS 2019 – Level II starts where Beginner’s Guide – Level I ends, following the same easy to read style and companion video instruction, but this time covering advanced topics and techniques. The purpose of this book is to teach advanced techniques including sheet metal, surfacing, how to create components in the context of an assembly and reference other components (Top-down design), propagate design changes with SOLIDWORKS’ parametric capabilities, mold design, welded structures and more while explaining the basic concepts of each trade to allow you to understand the how and why of each operation. The author uses simple examples to allow you to better understand each command and environment, as well as to make it easier to explain the purpose of each step, maximizing the learning time by focusing on one task at a time. This book is focused on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. At the end of this book, you will have acquired enough skills to be highly competitive when it comes to designing with SOLIDWORKS, and while there are many less frequently used commands and options available that will not be covered in this book, rest assured that those covered are most of the commands used every day by SOLIDWORKS designers. The author strived hard to include many of the commands required in the Certified SOLIDWORKS Professional Advanced and Expert exams as listed on the SOLIDWORKS website.

Download or read book SOLIDWORKS 2017 Basic Tools written by Paul Tran and published by SDC Publications. This book was released on 2016-11 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2017 Basic Tools is the first book in a three part series. It introduces new users to the SOLIDWORKS interface, SOLIDWORKS tools and basic modeling techniques. It provides you with a strong understanding of SOLIDWORKS and covers the creation of parts, assemblies and drawings. Every lesson and exercise in this book was created based on real world projects. Each of these projects have been broken down and developed into easy and comprehensible steps. Furthermore, at the end of every chapter there are self test questionnaires to ensure that you have gained sufficient knowledge from each section before moving on to more advanced lessons. This book takes the approach that in order to understand SOLIDWORKS, inside and out, you should create everything from the beginning and take it step by step.

Download or read book Beginner s Guide to SOLIDWORKS 2018 Level II written by Alejandro Reyes and published by SDC Publications. This book was released on 2018 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginner’s Guide to SOLIDWORKS 2018 – Level II starts where Beginner’s Guide – Level I ends, following the same easy to read style and companion video instruction, but this time covering advanced topics and techniques. The purpose of this book is to teach advanced techniques including sheet metal, surfacing, how to create components in the context of an assembly and reference other components (Top-down design), propagate design changes with SOLIDWORKS’ parametric capabilities, mold design, welded structures and more while explaining the basic concepts of each trade to allow you to understand the how and why of each operation. The author uses simple examples to allow you to better understand each command and environment, as well as to make it easier to explain the purpose of each step, maximizing the learning time by focusing on one task at a time. This book is focused on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. At the end of this book, you will have acquired enough skills to be highly competitive when it comes to designing with SOLIDWORKS, and while there are many less frequently used commands and options available that will not be covered in this book, rest assured that those covered are most of the commands used every day by SOLIDWORKS designers. The author strived hard to include many of the commands required in the Certified SOLIDWORKS Professional Advanced and Expert exams as listed on the SOLIDWORKS website.

Download or read book Learning SOLIDWORKS 2017 written by Randy Shih and published by SDC Publications. This book was released on 2017-03 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will teach you everything you need to know to start using SOLIDWORKS 2017 with easy to understand, step-by-step tutorials. This book features a simple robot design used as a project throughout the book. You will learn to model parts, create assemblies, run simulations and even create animations of your robot design. No previous experience with Computer Aided Design (CAD) is needed since this book starts at an introductory level. The author begins by getting you familiar with the SOLIDWORKS interface and its basic tools right away. You will start by learning to model simple robot parts and before long you will graduate to creating more complex parts and multi-view drawings. Along the way you will learn the fundamentals of parametric modeling through the use of geometric constraints and relationships. You will also become familiar with many of SOLIDWORKS's powerful tools and commands that enable you to easily construct complex features in your models. Also included is coverage of gears, gear trains and spur gear creation using SOLIDWORKS. This book continues by examining the different mechanisms commonly used in walking robots. You will learn the basic types of planar four-bar linkages commonly used in mechanical designs and how to use the GeoGebra Dynamic Geometry software to simulate and analyze 2D linkages. Using the knowledge you gained about linkages and mechanism, you will learn how to modify your robot and change its behavior by modifying or creating new parts. In the second to last chapter of this book you learn how to combine all the robot parts into assemblies and then run motion analysis. You will finish off your project by creating 3D animations of your robot in action. Finally, in the last chapter, the author introduces you to 3D printing. You will learn the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. Being able to turn your designs into physical objects will open up a whole new world of possibilities to you. There are many books that show you how to perform individual tasks with SOLIDWORKS, but this book takes you through an entire project and shows you the complete engineering process. By the end of this book you will have modeled and assembled nearly all the parts that make up the TAMIYA® Mechanical Tiger and can start building your own robot.

Download or read book Beginner s Guide to SOLIDWORKS 2023 Level I written by Alejandro Reyes and published by SDC Publications. This book was released on with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Designed to teach new users the basic concepts of SOLIDWORKS and good solid modeling techniques • Uses a task oriented approach to learning SOLIDWORKS • Focuses on the processes to complete the modeling of a part, instead of individual commands • Includes access to extensive video instruction • Covers commands found on the CSWA exam and includes a practice test • This edition features expanded content covering the CSWA exam This book is intended to help new users learn the basic concepts of SOLIDWORKS and good solid modeling techniques in an easy to follow guide that includes video instruction. It is a great starting point for those new to SOLIDWORKS or as a teaching aid in classroom training to become familiar with the software’s interface, basic commands and strategies as users complete a series of models while learning different ways to accomplish a particular task. At the end of this book, you will have a fairly good understanding of the SOLIDWORKS interface and the most commonly used commands for part modeling, assembly and detailing after completing a series of components and their 2D drawings complete with Bill of Materials. The book focuses on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. Throughout this book the author introduces you to new commands that are required to pass the Certified SOLIDWORKS Associate exam, as listed on the SOLIDWORKS website. A dedicated chapter provides you with details about the exam, as well as a practice test to help you prepare for the actual exam. SOLIDWORKS is an easy to use CAD software that includes many time saving tools that will enable new and experienced users to complete design tasks faster than before. Most commands covered in this book have advanced options, which may not be covered in this book. This is meant to be a starting point to help new users to learn the basic and most frequently used commands. Includes Video Instruction Each copy of this book includes access to video instruction. In these videos the author provides a clear presentation of tutorials found in the book. The videos reinforce the steps described in the book by allowing you to watch the exact steps the author uses to complete the exercises while he provides additional details along the way. Captioned versions of these videos are also available for customers who want or need video captions.

Download or read book SOLIDWORKS 2017 Intermediate Skills written by Paul Tran and published by SDC Publications. This book was released on 2016-11 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2017 Intermediate Skills is part of a three part series which builds on the SOLIDWORKS features learned in SOLIDWORKS 2017 Basic Tools. SOLIDWORKS 2017 Intermediate Skills broadens your SOLIDWORKS knowledge base by covering such features as surveys, lofts and boundaries, the use of multibodies, generating engineering drawings and other SOLIDWORKS functions that are critical for the effective use of this powerful software. This book helps prepare you for the advanced features of SOLIDWORKS which are covered in SOLIDWORKS Advanced Techniques. It uses a step by step tutorial approach with real world projects. This book also features a Quick-Reference-Guide to the SOLIDWORKS 2017 commands, icons, and customized hotkeys. Who’s this book for? This book is for the mid-level user, who is already familiar with the SOLIDWORKS program. It is also a great resource for the more CAD literate individuals who want to expand their knowledge of the different features that SOLIDWORKS 2017 has to offer.

Download or read book SOLIDWORKS Surface Design 2021 for Beginners and Intermediate Users written by Sandeep Dogra and published by CADArtifex. This book was released on with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS Surface Design 2021 for Beginners and Intermediate Users textbook has been designed for instructor-led courses as well as self-paced learning. It is intended to help engineers and designers interested in learning SOLIDWORKS for creating real-world surface models. This textbook is a great help for SOLIDWORKS users new to surface design. It consists of total 106 pages covering the surface design environment of SOLIDWORKS. It teaches users to use SOLIDWORKS mechanical design software for creating parametric complex shape surface models that are not possible to create with solid modeling due to its limitations. This textbook not only focuses on the usage of the tools and commands of SOLIDWORKS for creating surface models but also on the concept of design. It contains Tutorials followed by theory that provide users with step-by-step instructions for creating surface designs. Moreover, it ends with Hands-on Test Drives which allow users to experience the user friendly and technical capabilities of SOLIDWORKS. Main Features of the Textbook: • Comprehensive coverage of tools • Step-by-step real-world tutorials with every chapter • Hands-on test drives to enhance the skills at the end of every chapter • Additional notes and tips • Customized content for faculty (PowerPoint Presentations) • Free learning resources for faculty and students • Technical support for the book by contacting [email protected]