Download or read book Structural Bearings written by Helmut Eggert and published by John Wiley & Sons. This book was released on 2002-08-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bearings are used in the construction of bridges, for the distribution of loads between different elements and for compensating stresses. This volume describes their construction, function, calculation and applications, and is supplemented by normative regulations and research results. The book takes account of EN 1337 standards, which are binding on a European level. It also takes into account the latest experiences gained in practice as well as on the basis of recent tests, and includes examples for the correct placing of bearings and dampers.
Download or read book Bearings in Structural Engineering written by J. E. Long and published by John Wiley & Sons. This book was released on 1974 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Rubber Bearings for Seismic and Vibration Isolation written by James M. Kelly and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely used in civil, mechanical and automotive engineering since the early 1980s, multilayer rubber bearings have been used as seismic isolation devices for buildings in highly seismic areas in many countries. Their appeal in these applications comes from their ability to provide a component with high stiffness in one direction with high flexibility in one or more orthogonal directions. This combination of vertical stiffness with horizontal flexibility, achieved by reinforcing the rubber by thin steel shims perpendicular to the vertical load, enables them to be used as seismic and vibration isolators for machinery, buildings and bridges. Mechanics of Rubber Bearings for Seismic and Vibration Isolation collates the most important information on the mechanics of multilayer rubber bearings. It explores a unique and comprehensive combination of relevant topics, covering all prerequisite fundamental theory and providing a number of closed-form solutions to various boundary value problems as well as a comprehensive historical overview on the use of isolation. Many of the results presented in the book are new and are essential for a proper understanding of the behavior of these bearings and for the design and analysis of vibration or seismic isolation systems. The advantages afforded by adopting these natural rubber systems is clearly explained to designers and users of this technology, bringing into focus the design and specification of bearings for buildings, bridges and industrial structures. This comprehensive book: includes state of the art, as yet unpublished research along with all required fundamental concepts; is authored by world-leading experts with over 40 years of combined experience on seismic isolation and the behavior of multilayer rubber bearings; is accompanied by a website at www.wiley.com/go/kelly The concise approach of Mechanics of Rubber Bearings for Seismic and Vibration Isolation forms an invaluable resource for graduate students and researchers/practitioners in structural and mechanical engineering departments, in particular those working in seismic and vibration isolation.
Download or read book Innovative Bridge Design Handbook written by Alessio Pipinato and published by Elsevier. This book was released on 2021-09-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Bridge Design Handbook: Construction, Rehabilitation, and Maintenance, Second Edition, brings together the essentials of bridge engineering across design, assessment, research and construction. Written by an international group of experts, each chapter is divided into two parts: the first covers design issues, while the second presents current research into the innovative design approaches used across the world. This new edition includes new topics such as foot bridges, new materials in bridge engineering and soil-foundation structure interaction. All chapters have been updated to include the latest concepts in design, construction, and maintenance to reduce project cost, increase structural safety, and maximize durability. Code and standard references have been updated. - Completely revised and updated with the latest in bridge engineering and design - Provides detailed design procedures for specific bridges with solved examples - Presents structural analysis including numerical methods (FEM), dynamics, risk and reliability, and innovative structural typologies
Download or read book High load Multi rotational Bridge Bearings written by John F. Stanton and published by Transportation Research Board. This book was released on 1999 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Bearings and Expansion Joints for Bridges written by Günter Ramberger and published by IABSE. This book was released on 2002 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Bearings and Expansion Joints written by D J Lee and published by CRC Press. This book was released on 1994-11-03 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a guide to movement and restraint in bridges for bridge engineers and will enable them to draw up design calculations and specifications for effective installation, and satisfactory service and durability of bearings and joints. It has been fully revised and updated in line with current codes and design practice, modern developme
Download or read book Handbook of Structural Engineering written by W.F. Chen and published by CRC Press. This book was released on 2005-02-28 with total page 1765 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuing the best-selling tradition of the Handbook of Structural Engineering, this second edition is a comprehensive reference to the broad spectrum of structural engineering, encapsulating the theoretical, practical, and computational aspects of the field. The contributors cover traditional and innovative approaches to analysis, design, and rehabilitation. New topics include: fundamental theories of structural dynamics; advanced analysis; wind- and earthquake-resistant design; design of prestressed structures; high-performance steel, concrete, and fiber-reinforced polymers; semirigid frame structures; structural bracing; and structural design for fire safety.
Download or read book Structural Engineering and Geomechanics Volume 1 written by Sashi K. Kunnath and published by EOLSS Publications. This book was released on 2020-06-22 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding of dynamic effects on structures is critical to minimize losses from earthquakes and other hazards. These three books provide an overview of essential topics in structural and geotechnical engineering with an additional focus on related topics in earthquake engineering to enable readers gain such an understanding. One of the ultimate objectives of these books is to provide readers with insights into seismic analysis and design. However, in order to accomplish that objective, background material on structural and geotechnical engineering is necessary. Hence the first two sections of the book provide this background material followed by selected topics in earthquake engineering. The material is organized into three major parts. The first section covers topics in structural engineering. Beginning with fundamental mechanics of materials, the book includes chapters on linear and nonlinear analysis as well as topics on modeling of structures from different perspectives. In addition to traditional design of structural systems, introductions to important concepts in structural reliability and structural stability are discussed. Also covered are subjects of recent interest, viz., blast and impact effects on structures as well as the use of fiber reinforced polymer composites in structural applications. Given the growing interest in urban renewal, an interesting chapter on restoration of historic cities is also included. The second part of the book covers topics in geotechnical engineering, covering both shallow and deep foundations and issues and procedures for geotechnical modeling. The final part of the book focuses on earthquake engineering with emphasis on both structures and foundations. Here again, the material covered includes both traditional seismic design and innovative seismic protection. And more importantly, concepts in modeling for seismic analysis are highlighted.
Download or read book Design of Seismic Isolated Structures written by Farzad Naeim and published by John Wiley & Sons. This book was released on 1999-03-25 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete, practical coverage of the evaluation, analysis, and design and code requirements of seismic isolation systems. Based on the concept of reducing seismic demand rather than increasing the earthquake resistance capacity of structures, seismic isolation is a surprisingly simple approach to earthquake protection. However, proper application of this technology within complex seismic design code requirements is both complicated and difficult. Design of Seismic Isolated Structures provides complete, up-to-date coverage of seismic isolation, complete with a systematic development of concepts in theory and practical application supplemented by numerical examples. This book helps design professionals navigate and understand the ideas and procedures involved in the analysis, design, and development of specifications for seismic isolated structures. It also provides a framework for satisfying code requirements while retaining the favorable cost-effective and damage control aspects of this new technology. An indispensable resource for practicing and aspiring engineers and architects, Design of Seismic Isolated Structures includes: * Isolation system components. * Complete coverage of code provisions for seismic isolation. * Mechanical characteristics and modeling of isolators. * Buckling and stability of elastomeric isolators. * Examples of seismic isolation designs. * Specifications for the design, manufacture, and testing of isolation devices.
Download or read book Bridge Engineering written by J. A. L. Waddell and published by . This book was released on 1916 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aircraft Sustainment and Repair written by Rhys Jones and published by Butterworth-Heinemann. This book was released on 2017-12-05 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Sustainment and Repair is a one-stop-shop for practitioners and researchers in the field of aircraft sustainment, adhesively bonded aircraft joints, bonded composites repairs, and the application of cold spray to military and civil aircraft. Outlining the state-of-the-art in aircraft sustainment, this book covers the use of quantitative fractography to determine the in-service crack length versus flight hours curve, the effect of intergranular cracking on structural integrity and the structural significance of corrosion. The book additionally illustrates the potential of composite repairs and SPD applications to metallic airframes. - Covers corrosion damage assessment and management in aircraft structures - Includes a key chapter on U.S. developments in the emerging field of supersonic particle deposition (SPD) - Shows how to design and assess the potential benefits of both bonded composite repairs and SPD repairs to metallic aircraft structures to meet the damage tolerance requirements inherent in FAA ac 20-107b and the U.S. Joint Services
Download or read book Air Bearings written by Farid Al-Bender and published by John Wiley & Sons. This book was released on 2021-01-15 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive treatise on gas bearing theory, design and application This book treats the fundamental aspects of gas bearings of different configurations (thrust, radial, circular, conical) and operating principles (externally pressurized, self-acting, hybrid, squeeze), guiding the reader throughout the design process from theoretical modelling, design parameters, numerical formulation, through experimental characterisation and practical design and fabrication. The book devotes a substantial part to the dynamic stability issues (pneumatic hammering, sub-synchronous whirling, active dynamic compensation and control), treating them comprehensively from theoretical and experimental points of view. Key features: Systematic and thorough treatment of the topic. Summarizes relevant previous knowledge with extensive references. Includes numerical modelling and solutions useful for practical application. Thorough treatment of the gas-film dynamics problem including active control. Discusses high-speed bearings and applications. Air Bearings: Theory, Design and Applications is a useful reference for academics, researchers, instructors, and design engineers. The contents will help readers to formulate a gas-bearing problem correctly, set up the basic equations, solve them establishing the static and dynamic characteristics, utilise these to examine the scope of the design space of a given problem, and evaluate practical issues, be they in design, construction or testing.
Download or read book Sustainability of Construction Materials written by Jamal Khatib and published by Elsevier. This book was released on 2009-04-29 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, much of the development of building materials has predominantly focused on producing cheaper, stronger and more durable construction materials. More recently attention has been given to the environmental issues in manufacturing, using, disposing and recycling of construction materials. Sustainability of construction materials brings together a wealth of recent research on the subject.The first part of the book gives a comprehensive and detailed analysis of the sustainability of the following building materials: aggregates; timber, wood and bamboo; vegetable fibres; masonry; cement, concrete and cement replacement materials; metals and alloys; glass; and engineered wood products. A final group of chapters cover the use of waste tyre rubber in civil engineering works, the durability of sustainable construction materials and nanotechnologies for sustainable construction.With its distinguished editor and international team of contributors, Sustainability of construction materials is a standard reference for anyone involved in the construction and civil engineering industries with an interest in the highly important topic of sustainability. - Provides a comprehensive and detailed analysis of the sustainability of a variety of construction materials ranging from wood and bamboo to cement and concrete - Assesses the durability of sustainable construction materials including the utilisation of waste tyre rubber and vegetable fibres - Collates a wealth of recent research including relevant case studies as well as an investigation into future trends
Download or read book Structural Engineering written by John Edward Kirkham and published by . This book was released on 1914 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel Designers Manual Fifth Edition The Steel Construction Institute written by Institute Steel Construction and published by Wiley-Blackwell. This book was released on 1993-01-18 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic manual for structural steelwork design was first published in 1956. Since then, it has sold many thousands of copies worldwide. The fifth edition is the first major revision for 20 years and is the first edition to be fully based on limit state design, now used as the primary design method, and on the UK code of practice, BS 5950. It provides, in a single volume, all you need to know about structural steel design.
Download or read book Insights and Innovations in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2016-11-25 with total page 2223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insights and Innovations in Structural Engineering, Mechanics and Computation comprises 360 papers that were presented at the Sixth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2016, Cape Town, South Africa, 5-7 September 2016). The papers reflect the broad scope of the SEMC conferences, and cover a wide range of engineering structures (buildings, bridges, towers, roofs, foundations, offshore structures, tunnels, dams, vessels, vehicles and machinery) and engineering materials (steel, aluminium, concrete, masonry, timber, glass, polymers, composites, laminates, smart materials).
