Download or read book Beam Position Monitoring in the 100 MHz to 500 MHz Frequency Range Using the Log ratio Technique written by and published by . This book was released on 1993 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: A logarithmic-ratio beam position monitor (BPM) circuit has been designed that operates directly from radio frequency- signals in the 100-MHz to 500-MHz frequency range. The circuit uses four logarithmic amplifiers, a pair for each channel. One amplifier per channel receives its signal input directly from a BPM electrode while the second amplifier receives the same signal attenuated by 7-dB. The two outputs of each channel are summed together and the composite video outputs are applied to a differencing amplifier. The net result is the logarithmic-ratio position measurement derived from the two input rf signals. Paralleling the pairs of outputs from the amplifiers provides measurement accuracy that is comparable to other circuit techniques used for position measurement.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 1993 Particle Accelerator Conference written by and published by . This book was released on 1993 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 1999 Particle Accelerator Conference written by and published by . This book was released on 1999 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book INIS Atomindex written by and published by . This book was released on 1995 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Log ratio Signal processing Technique for Beam Position Monitors written by and published by . This book was released on 1993 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two basic signal-processing techniques are presently in wide use for the processing of signals from beam position monitors (BPMs); difference-over-sum, and amplitude-modulation-to-phase-modulation (AM-PM) conversion. Difference-over-sum offers simplicity and low cost, but poor real-time normalized response and amplitude dynamic range. AM-PM offers fast real-time response and large dynamic range, but is costly and difficult to implement. Logarithmic-ratio processing, a technique using newly available inexpensive hybrid circuits, appears to offer the advantages of both, and the disadvantages of neither. This paper reviews the features techniques, and highlights the features of the log-ratio technique. Among the advantages of log-ratio is a beam-displacement response linearity that is superior to either difference-over-sum or AM-PM for circular-aperture BPMs.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1993 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.
Download or read book Accelerator Instrumentation written by Hinkson and published by American Inst. of Physics. This book was released on 1998-04-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Proceedings of the October 1992 workshop, including papers and poster sessions. Papers address accelerator reliability, beam diagnostics, beam monitors, signal processing, fluorescent screens, timing systems, and software analysis. Lacks an index. Annotation c. by Book News, Inc., Portland, Or.
Download or read book Log ratio Circuit for Beam Position Monitoring written by and published by . This book was released on 1991 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: The logarithmic ratio of the signal amplitudes from beam-position probe-electrodes provides a normalized real-time analog signal that is more linear in beam displacement than other signal-processing techniques for circular cross-section, beam-position monitors. This paper describes work being done to develop a log-ratio circuit using an inexpensive, commercially available, logarithmic-response, integrated-circuit rf-amplifier. The circuit uses two amplifiers in a log (A) - log (B) = log (A/B) configuration to provide the logarithmic ratio of the two rf input signals from the probe. The output is a real-time analog signal proportional to beam displacement. 4 refs., 7 figs.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1993 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi gev High Performance Accelerators And Related Technology Proceedings Of The Xvi Rcnp Osaka International Symposium written by Kichiji Hatanaka and published by World Scientific. This book was released on 1997-12-18 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers the field of circular accelerators and related technology for the sub-GeV to multi-GeV energy region from the viewpoint of realization of high performance, i.e., performance and perspectives of operating multi-GeV accelerators, future projects in the multi-GeV energy region, lattice designs and beam dynamics, electron cooling and stochastic cooling, injection and extraction, beam diagnostics, superconducting and normal magnets, magnet power supplies, RF systems, and internal targets. The contributors include leading accelerator physicists from around the world.
Download or read book Beam Position and Total Current Monitor for Heavy Ion Fusion Beams written by and published by . This book was released on 1992 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy Ion Fusion requires moderate currents, 1-10A, for a duration of about 1 [mu]s. For accurate beam transport, the center of charge must be located to within [plus minus] 100 [mu]m. Beam position and intensity may be excited at frequencies approaching 10 MHz, and the monitoring system must have adequate bandwidth to respond at these frequencies. We have modified the Rogowski technique by using distributed reactance multiturn magnetic loops so that it is suitable for measuring current position as well as amplitude. Four identical stripline coils are wound one per quadrant around a non magnetic core. The sensitivity is similar to that of a lumped coil system, with the added advantage of increased bandwidth. The voltages induced on the four separate coils are compared and suitable signal conditioning is performed to recover beam position and intensity information.
Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of Nanometer Resolution C Band Radio Frequency Beam Position Monitors in the Final Focus Test Beam written by and published by . This book was released on 1998 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a 47 GeV electron beam, the Final Focus Test Beam (FFTB) produces vertical spot sizes around 70 nm. These small beam sizes introduce an excellent opportunity to develop and test high resolution Radio Frequency Beam Position Monitors (RF-BPMs). These BPMs are designed to measure pulse to pulse beam motion (jitter) at a theoretical resolution of approximately 1 nm. The beam induces a TM110 mode with an amplitude linearly proportional to its charge and displacement from the BPM's (cylindrical cavity) axis. The C-band (5,712 MHz) TM110 signal is processed and converted into beam position for use by the Stanford Linear Collider (SLC) control system. Presented are the experimental procedures, acquisition, and analysis of data demonstrating resolution of jitter near 25 nm. With the design of future ee− linear colliders requiring spot sizes close to 3 nm, understanding and developing RF-BPMs will be essential in resolving and controlling jitter.
Download or read book Beam Position Monitoring in the AGS Linac to Booster Transfer Line written by and published by . This book was released on 1991 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: A beam position monitor system has been developed and used in the commissioning of Brookhaven's Linac to Booster transfer line. This line transports a chopped, RF modulated H- beam from the 200 MeV Linac to the AGS Booster. Over a 15dB dynamic range in beam current, the position monitor system provides a real-time, normalized position signal with an analog bandwidth of about 20 MHz. Seven directional coupler style pickups are installed in the line with each pickup sensing both horizontal and vertical position. Analog processing electronics are located in the tunnel and incorporate the amplitude modulation to phase modulation normalization technique. To avoid interference from the 200 MHz linac RF system, processing is performed at 400 MHz. This paper will provide a system overview and report results from the commissioning experience.
Download or read book Conference Record of the 1991 IEEE Particle Accelerator Conference written by and published by . This book was released on 1991 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Logarithmic Beam Position Monitor written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern logarithmic amplifiers offer wide dynamic range, high bandwidth, good logarithmic conformance, and low cost making them attractive for beam position measurements. A log-ratio beam position monitor has been designed and built at SLAC for use at the PEP-II B-Factory. An integrated circuit logarithmic amplifier from Analog Devices, the AD8307, recovers the envelope of the 476 MHz harmonic of the beam signal. A log BPM board with two logarithmic and one differential amplifier performs the basic function of forming an output voltage proportional to the difference of the logarithms of the signal amplitudes on opposite electrodes. This voltage is approximately linear with beam position. For this application, the authors have limited the video bandwidth of the log amps to 50 kHz in order to remove fill pattern dependence. The log BPM board has an interface for testing and simulating beam offsets. The log BPM's were developed for a PEP-II ring protection chassis. Here the log BPM's function to identify dangerous orbit excursions. These excursions are signaled to a system, which can dump the beam. Two such chassis serve to protect the PEP-II rings.
