Download or read book Bayesian Modeling of Pitting Corrosion in Steam Generators written by Dan Mao and published by . This book was released on 2007 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steam generators in nuclear power plants experienced varying degrees of under-deposit pitting corrosion. A probabilistic model to accurately predict pitting corrosion is necessary for effective life-cycle management of steam generators. This thesis presents an advanced probabilistic model of pitting corrosion characterizing the inherent randomness of the pitting process and measurement uncertainties of the in-service inspection (ISI) data obtained from eddy current (EC) inspections. A Bayesian method is developed for estimating the model parameters. The proposed model is able to estimate the number of actual pits, the actual pit depth as well as the maximum pit depth, which is the main interest of the pitting corrosion model. A MATLAB program of the Markov chain Monte Carlo technique is developed to perform the Bayesian estimations. Simulation experiments are performed to check the behavior of the Bayesian method. Results show that the MCMC algorithm is an effective way to estimate the model parameters. Also, the effectiveness and efficiency of Bayesian modeling are validated. A comprehensive case study is also presented on the in-service inspection data of pitting corrosion in a steam generator unit. The Weibull distribution is found to be an appropriate probability distribution for modeling the actual pit depth in steam generators.
Download or read book Bayesian Network Modeling of Corrosion written by Narasi Sridhar and published by Springer Nature. This book was released on with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Master s Theses Directories written by and published by . This book was released on 2007 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Education, arts and social sciences, natural and technical sciences in the United States and Canada".
Download or read book Pitting corrosion in steam generator heating tubes made of CrNi steel Causes and possible means of protection written by Bernhard Stellwag and published by . This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy
Download or read book Physics Briefs written by and published by . This book was released on 1983 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Current Research in Britain written by and published by . This book was released on 1986 with total page 1254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress Corrosion Cracking of Pipelines written by Y. Frank Cheng and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains why pipeline stress corrosion cracking happens and how it can be prevented Pipelines sit at the heart of the global economy. When they are in good working order, they deliver fuel to meet the ever-growing demand for energy around the world. When they fail due to stress corrosion cracking, they can wreak environmental havoc. This book skillfully explains the fundamental science and engineering of pipeline stress corrosion cracking based on the latest research findings and actual case histories. The author explains how and why pipelines fall prey to stress corrosion cracking and then offers tested and proven strategies for preventing, detecting, and monitoring it in order to prevent pipeline failure. Stress Corrosion Cracking of Pipelines begins with a brief introduction and then explores general principals of stress corrosion cracking, including two detailed case studies of pipeline failure. Next, the author covers: Near-neutral pH stress corrosion cracking of pipelines High pH stress corrosion cracking of pipelines Stress corrosion cracking of pipelines in acidic soil environments Stress corrosion cracking at pipeline welds Stress corrosion cracking of high-strength pipeline steels The final chapter is dedicated to effective management and mitigation of pipeline stress corrosion cracking. Throughout the book, the author develops a number of theoretical models and concepts based on advanced microscopic electrochemical measurements to help readers better understand the occurrence of stress corrosion cracking. By examining all aspects of pipeline stress corrosion cracking—the causes, mechanisms, and management strategies—this book enables engineers to construct better pipelines and then maintain and monitor them to ensure safe, reliable energy supplies for the world.
Download or read book Risk based Inspection written by and published by . This book was released on 1994 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Corrosion Engineering Third Edition written by Pierre R. Roberge and published by McGraw Hill Professional. This book was released on 2019-07-08 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The most complete corrosion control reference on the market―thoroughly revised for the latest advances This fully updated guide offers complete coverage of the latest corrosion-resistant materials, methods, and technologies. Written by a recognized expert on the subject, the book covers all aspects of corrosion damage, including detection, monitoring, prevention, and control. You will learn how to select materials and resolve design issues where corrosion is a factor. Handbook of Corrosion Engineering, Third Edition shows, step by step, how to understand, predict, evaluate, mitigate, and correct corrosion problems. This edition provides a new focus on the management of corrosion problems and draws on methodologies and examples from the 2016 IMPACT report. A new chapter discusses corrosion management across governments and industries. Coverage includes: • The functions and roles of a corrosion engineer • Atmospheric corrosion and mapping atmospheric corrosivity • Corrosion in waste water treatment and in water and soils • Corrosion of reinforced concrete • Microbes and biofouling • High-temperature corrosion • Modeling corrosion processes and life prediction • Corrosion failures • Corrosion maintenance through inspection and monitoring • Corrosion management across governments and industries • Selection and design considerations for engineering materials • Protective coatings and corrosion inhibitors • Cathodic and anodic protection
Download or read book Corrosion of Aluminium written by Christian Vargel and published by Elsevier. This book was released on 2004-10-02 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. 600 bibliographic references provide a comprehensive guide to over 100 years of related study Providing practical applications to the reader across many industries Accessible to both the beginner and the expert
Download or read book Research Opportunities in Corrosion Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 2011-01-27 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of corrosion science and engineering is on the threshold of important advances. Advances in lifetime prediction and technological solutions, as enabled by the convergence of experimental and computational length and timescales and powerful new modeling techniques, are allowing the development of rigorous, mechanistically based models from observations and physical laws. Despite considerable progress in the integration of materials by design into engineering development of products, corrosion considerations are typically missing from such constructs. Similarly, condition monitoring and remaining life prediction (prognosis) do not at present incorporate corrosion factors. Great opportunities exist to use the framework of these materials design and engineering tools to stimulate corrosion research and development to achieve quantitative life prediction, to incorporate state-of-the-art sensing approaches into experimentation and materials architectures, and to introduce environmental degradation factors into these capabilities. Research Opportunities in Corrosion Science and Engineering identifies grand challenges for the corrosion research community, highlights research opportunities in corrosion science and engineering, and posits a national strategy for corrosion research. It is a logical and necessary complement to the recently published book, Assessment of Corrosion Education, which emphasized that technical education must be supported by academic, industrial, and government research. Although the present report focuses on the government role, this emphasis does not diminish the role of industry or academia.
Download or read book Condition Assessment of Aged Structures written by J K Paik and published by Elsevier. This book was released on 2014-01-23 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any structural system in service is subject to age-related deterioration, leading to potential concerns regarding maintenance, health & safety, environmental and economic implications. Condition assessment of aged structures is an invaluable, single source of information on structural assessment techniques for marine and land-based structures such as ships, offshore installations, industrial plant and buildings. Topics covered include: - Current practices and standards for structural condition assessment - Fundamental mechanisms and advanced mathematical methods for predicting structural deterioration - Residual strength assessment of deteriorated structures - Inspection and maintenance of aged structures - Reliability and risk assessment of aged structures Professionals from a broad range of disciplines will be able to gain a better understanding of current practices and standards for structural condition assessment or health monitoring, and what future trends might be. Single source of information on structural assessment techniques for marine and land-based structures Examines the residual strength and reliability of aged structures Assesses current practices covering inspection, health monitoring and maintenance
Download or read book Probability and Statistics for Engineering and the Sciences Enhanced Webassign Access written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Doctoral Dissertations written by and published by . This book was released on 1981 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combining Pattern Classifiers written by Ludmila I. Kuncheva and published by John Wiley & Sons. This book was released on 2004-08-20 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering pattern classification methods, Combining Classifiers: Ideas and Methods focuses on the important and widely studied issue of how to combine several classifiers together in order to achieve improved recognition performance. It is one of the first books to provide unified, coherent, and expansive coverage of the topic and as such will be welcomed by those involved in the area. With case studies that bring the text alive and demonstrate 'real-world' applications it is destined to become essential reading.
