Download or read book Basics of Aerothermodynamics written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last two decades have brought two important developments for aeroth- modynamics. One is that airbreathing hypersonic flight became the topic of technology programmes and extended system studies. The other is the emergence and maturing of the discrete numerical methods of aerodyn- ics/aerothermodynamics complementary to the ground-simulation facilities, with the parallel enormous growth of computer power. Airbreathing hypersonic flight vehicles are, in contrast to aeroassisted re-entry vehicles, drag sensitive. They have, further, highly integrated lift and propulsion systems. This means that viscous eflFects, like boundary-layer development, laminar-turbulent transition, to a certain degree also strong interaction phenomena, are much more important for such vehicles than for re-entry vehicles. This holds also for the thermal state of the surface and thermal surface effects, concerning viscous and thermo-chemical phenomena (more important for re-entry vehicles) at and near the wall. The discrete numerical methods of aerodynamics/aerothermodynamics permit now - what was twenty years ago not imaginable - the simulation of high speed flows past real flight vehicle configurations with thermo-chemical and viscous effects, the description of the latter being still handicapped by in sufficient flow-physics models. The benefits of numerical simulation for flight vehicle design are enormous: much improved aerodynamic shape definition and optimization, provision of accurate and reliable aerodynamic data, and highly accurate determination of thermal and mechanical loads. Truly mul- disciplinary design and optimization methods regarding the layout of thermal protection systems, all kinds of aero-servoelasticity problems of the airframe, et cetera, begin now to emerge.
Download or read book Basics of Aerothermodynamics written by Ernst-Heinrich Hirschel and published by . This book was released on 2015-01-31 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basics Of Aerothermodynamics written by Hirschel E.H. and published by . This book was released on 2008-01-01 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypersonic Aerothermodynamics written by John J. Bertin and published by AIAA. This book was released on 1994 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern treatment of hypersonic aerothermodynamics for students, engineers, scientists, and program managers involved in the study and application of hypersonic flight. It assumes an understanding of the basic principles of fluid mechanics, thermodynamics, compressible flow, and heat transfer. Ten chapters address: general characterization of hypersonic flows; basic equations of motion; defining the aerothermodynamic environment; experimental measurements of hypersonic flows; stagnation-region flowfield; the pressure distribution; the boundary layer and convective heat transfer; aerodynamic forces and moments; viscous interactions; and aerothermodynamics and design considerations. Includes sample exercises and homework problems. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Aerothermodynamics and Jet Propulsion written by Paul G. A. Cizmas and published by Cambridge University Press. This book was released on 2021-12-02 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This robust introduction to aerothermodynamics uses example-based teaching to provide students with a solid theoretical foundation linked to real-world engineering scenarios.
Download or read book Selected Aerothermodynamic Design Problems of Hypersonic Flight Vehicles written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2009-11-26 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book selected aerothermodynamic design problems in hypersonic vehicles are treated. Where applicable, it emphasizes the fact that outer surfaces of hypersonic vehicles primarily are radiation-cooled, an interdisciplinary topic with many implications.
Download or read book Aerothermodynamics of Aircraft Engine Components written by Gordon C. Oates and published by AIAA. This book was released on 1985 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Design and R & D engineers and students will value the comprehensive, meticulous coverage in this volume. Beginning with the basic principles and concepts of aeropropulsion combustion, chapters explore specific processes, limitations, and analytical methods as they bear on component design.
Download or read book Fluid and Gasdynamics written by G.H. Schnerr and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers a wide range of theoretical, numerical and experimental research papers on fluid dynamics. The major fields of research - fundamentals of fluid mechanics as well as their applications - are treated: - stability phenomena: convective flow, thermal and hydrodynamic systems - transition, turbulence and separation: boundary-layer, turbulent combustion, rarefied gasdynamics, near wall and off wall flow fields, energy dissipation - transonic flow: homogeneous condensation, shock-waves, effects at Mach number unity - hypersonic flow: flow over spheres, aerothermodynamics, relaxation - fluid machinery: axial fans, compressor cascades, fluid couplings - computational fluid dynamics: passive shock control, zonal computation, cylinderflow, flow over wings - miscellaneous problems.
Download or read book Theoretical and Applied Aerodynamics written by J. J. Chattot and published by Springer. This book was released on 2015-03-31 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers classical and modern aerodynamics, theories and related numerical methods, for senior and first-year graduate engineering students, including: -The classical potential (incompressible) flow theories for low speed aerodynamics of thin airfoils and high and low aspect ratio wings. - The linearized theories for compressible subsonic and supersonic aerodynamics. - The nonlinear transonic small disturbance potential flow theory, including supercritical wing sections, the extended transonic area rule with lift effect, transonic lifting line and swept or oblique wings to minimize wave drag. Unsteady flow is also briefly discussed. Numerical simulations based on relaxation mixed-finite difference methods are presented and explained. - Boundary layer theory for all Mach number regimes and viscous/inviscid interaction procedures used in practical aerodynamics calculations. There are also four chapters covering special topics, including wind turbines and propellers, airplane design, flow analogies and hypersonic (rotational) flows. A unique feature of the book is its ten self-tests and their solutions as well as an appendix on special techniques of functions of complex variables, method of characteristics and conservation laws and shock waves. The book is the culmination of two courses taught every year by the two authors for the last two decades to seniors and first-year graduate students of aerospace engineering at UC Davis.
Download or read book Hypersonic and High Temperature Gas Dynamics written by John David Anderson and published by AIAA. This book was released on 1989 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a self-contained text for those students and readers interested in learning hypersonic flow and high-temperature gas dynamics. It assumes no prior familiarity with either subject on the part of the reader. If you have never studied hypersonic and/or high-temperature gas dynamics before, and if you have never worked extensively in the area, then this book is for you. On the other hand, if you have worked and/or are working in these areas, and you want a cohesive presentation of the fundamentals, a development of important theory and techniques, a discussion of the salient results with emphasis on the physical aspects, and a presentation of modern thinking in these areas, then this book is also for you. In other words, this book is designed for two roles: 1) as an effective classroom text that can be used with ease by the instructor, and understood with ease by the student; and 2) as a viable, professional working tool for engineers, scientists, and managers who have any contact in their jobs with hypersonic and/or high-temperature flow.
Download or read book Handbook of Space Technology written by Wilfried Ley and published by John Wiley & Sons. This book was released on 2009-03-18 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years since the first edition was published in the German language, and just over fifty years since the launch of the Earth’s first ever artificial satellite Sputnik 1, this third edition of the Handbook of Space Technology presents in fully integrated colour a detailed insight into the fascinating world of space for the first time in the English language. Authored by over 70 leading experts from universities, research institutions and the space industry, this comprehensive handbook describes the processes and methodologies behind the development, construction, operation and utilization of space systems, presenting the profound changes that have occurred in recent years in the engineering, materials, processes and even politics associated with space technologies and utilization. The individual chapters are self-contained, enabling the reader to gain a quick and reliable overview of a selected field; an extensive reference and keyword list helps those who wish to deepen their understanding of individual topics. Featuring superb, full colour illustrations and photography throughout, this interdisciplinary reference contains practical, hands-on engineering and planning information that will be invaluable to those on a career path within space technology, or simply for those of us who’d like to know more about this fascinating industry. Main section headings include: Introduction (historical overview, space missions) Fundamentals (orbital mechanics, aerothermodynamics/ reentry, space debris) Launch Vehicles (staged technologies, propulsion systems, launch infrastructure) Space Vehicle Subsystems (structure, energy supply, thermal controls, attitude control, communication) Aspects of Human Flight (man in space, life support systems, rendezvous and docking) Mission Operations (satellite operation, control center, ground station network) Utilization of Space (Earth observation, communication navigation, space astronomy, material sciences, space medicine, robotics) Configuration and Design of a Space Vehicle (mission concept, system concept, environmental simulation, system design, Galileo satellites) Management of Space Missions (project management, quality management, cost management, space law)
Download or read book Computational Space Flight Mechanics written by Claus Weiland and published by Springer Science & Business Media. This book was released on 2010-06-29 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Themechanicsofspace?ightisan olddiscipline.Itstopicoriginallywasthemotion of planets, moons and other celestial bodies in gravitational ?elds. Kepler’s (1571 - 1630) observations and measurements have led to probably the ?rst mathematical description of planet’s motion. Newton (1642 - 1727) gave then, with the devel- ment of his principles of mechanics, the physical explanation of these motions. Since then man has started in the second half of the 20th centuryto capture ph- ically the Space in the sense that he did develop arti?cial celestial bodies, which he brought into Earth’s orbits, like satellites or space stations, or which he did send to planets or moons of our planetary system, like probes, or by which p- ple were brought to the moon and back, like capsules. Further he developed an advanced space transportation system, the U.S. Space Shuttle Orbiter, which is the only winged space vehicle ever in operation. In the last two and a half decades there were several activities in the world in order to succeed the U.S. Orbiter, like the HERMES project in Europe, the HOPE project in Japan, the X-33, X-34 and X-37 studies and demonstrators in the United States and the joint U.S. - European project X-38. However, all these projects were cancelled. The motion of these vehicles can be described by Newton’s equation of motion.
Download or read book Scramjet Propulsion written by Dora Musielak and published by John Wiley & Sons. This book was released on 2023-01-10 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scramjet Propulsion Explore the cutting edge of HAP technologies with this comprehensive resource from an international leader in her field Scramjet Propulsion: A Practical Introduction delivers a comprehensive treatment of hypersonic air breathing propulsion and its applications. The book covers the most up-to-date hypersonic technologies, like endothermic fuels, fuel injection and flameholding systems, high temperature materials, and TPS, and offers technological overviews of hypersonic flight platforms like the X-43A, X-51A, and HiFIRE. It is organized around easy-to-understand explanations of technical challenges and provides extensive references for the information contained within. The highly accomplished author provides readers with a fulsome description of the theoretical underpinnings of hypersonic technologies, as well as critical design and technology issues affecting hypersonic air breathing propulsion technologies. The book’s combination of introductory theory and advanced instruction about individual hypersonic engine components is ideal for students and practitioners in fields as diverse as hypersonic vehicle and propulsion development for missile defense technologies, launch aerospaceplanes, and civilian transports. Over 250 illustrations and tables round out the material. Readers will also learn from: A thorough introduction to hypersonic flight, hypersonic vehicle concepts, and a review of fundamental principles in hypersonic air breathing propulsion Explorations of the aerothermodynamics of scramjet engines and the design of scramjet components, as well as hypersonic air breathing propulsion combustors and fuels Analyses of dual-mode combustion phenomena, materials structures, and thermal management in hypersonic vehicles, and combined cycle propulsion An examination of CFD analysis, ground and flight testing, and simulation Perfect for researchers and graduate students in aerospace engineering, Scramjet Propulsion: A Practical Introduction is also an indispensable addition to the libraries of engineers working on hypersonic vehicle development seeking a state-of-the-art resource in one of the most potentially disruptive areas of aerospace research today.
Download or read book Turbomachinery Fluid Dynamics and Heat Transfer written by Hah and published by CRC Press. This book was released on 1997-02-04 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This festschrift in honor of Professor Budugur Lakshminarayana's 60th birthday-based on the proceedings of a symposium on Turbomachinery Fluid Dynamics and Heat Transfer held recently at The Pennsylvania State University, University Park-provides authoritative and conclusive research results as well as new insights into complex flow features found in the turbomachinery used for propulsion, power, and industrial applications. Explaining in detail compressors, heat transfer fields in turbines, computational fluid dynamics, and unsteady flows, Turbomachinery Fluid Dynamics and Heat Transfer covers: Mixing mechanisms, annulus wall boundary layers, and the flow field in transonic turbocompressors The numerical implementation of turbulence models in a computer code Secondary flows, film cooling, and thermal turbulence modeling The visualization method of modeling using liquid crystals Innovative techniques in the computational modeling of compressor and turbine flows measurement in unsteady flows as well as axial flows and compressor noise generation And much more Generously illustrated and containing key bibliographic citations, Turbomachinery Fluid Dynamics and Heat Transfer is an indispensable resource for mechanical, design, aerospace, marine, manufacturing, materials, industrial, and reliability engineers; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Conceptual Shape Optimization of Entry Vehicles written by Dominic Dirkx and published by Springer. This book was released on 2016-12-09 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the parameterization of entry capsules, including Apollo capsules and planetary probes, and winged entry vehicles such as the Space Shuttle and lifting bodies. The aerodynamic modelling is based on a variety of panel methods that take shadowing into account, and it has been validated with flight and wind tunnel data of Apollo and the Space Shuttle. The shape optimization is combined with constrained trajectory analysis, and the multi-objective approach provides the engineer with a Pareto front of optimal shapes. The method detailed in Conceptual Shape Optimization of Entry Vehicles is straightforward, and the output gives the engineer insight in the effect of shape variations on trajectory performance. All applied models and algorithms used are explained in detail, allowing for reconstructing the design tool to the researcher’s requirements. Conceptual Shape Optimization of Entry Vehicles will be of interest to both researchers and graduate students in the field of aerospace engineering, and to practitioners within the aerospace industry.
Download or read book Aerodynamic Data of Space Vehicles written by Claus Weiland and published by Springer Science & Business Media. This book was released on 2014-02-22 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capacity and quality of the atmospheric flight performance of space flight vehicles is characterized by their aerodynamic data bases. A complete aerodynamic data base would encompass the coefficients of the static longitudinal and lateral motions and the related dynamic coefficients. In this book the aerodynamics of 27 vehicles are considered. Only a few of them did really fly. Therefore the aerodynamic data bases are often not complete, in particular when the projects or programs were more or less abruptly stopped, often due to political decisions. Configurational design studies or the development of demonstrators usually happen with reduced or incomplete aerodynamic data sets. Therefore some data sets base just on the application of one of the following tools: semi-empirical design methods, wind tunnel tests, numerical simulations. In so far a high percentage of the data presented is incomplete and would have to be verified. Flight mechanics needs the aerodynamic coefficients as function of a lot of variables. The allocation of the aerodynamic coefficients for a particular flight operation at a specific trajectory point is conducted by an aerodynamic model. The establishment of such models is described in this book. This book is written for graduate and doctoral students to give them insight into the aerodynamics of the various flight configurations. Further for design and development engineers in industry and at research institutes (including universities) searching for an appropriate vehicle shape, as well as for non-specialists, who may be interested in this subject. The book will be helpful, too, in the case that system studies require in their concept phases the selection of suitable vehicle shapes.
Download or read book 100 Volumes of Notes on Numerical Fluid Mechanics written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2009-05-19 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a book that will be required reading for engineers, physicists, and computer scientists, the editors have collated a number of articles on fluid mechanics, written by some of the world’s leading researchers and practitioners in this important subject area.
