Download or read book Design of Reinforced Concrete written by Jack C. McCormac and published by . This book was released on 2005 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book Introduction to Reinforced Concrete Design written by Mohamad Ziad Bayasi and published by Linus Learning. This book was released on 2009 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of Reinforced Concrete Design written by Mete A. Sozen and published by CRC Press. This book was released on 2014-07-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encouraging creative uses of reinforced concrete, Principles of Reinforced Concrete Design draws a clear distinction between fundamentals and professional consensus. This text presents a mixture of fundamentals along with practical methods. It provides the fundamental concepts required for designing reinforced concrete (RC) structures, emphasizing principles based on mechanics, experience, and experimentation, while encouraging practitioners to consult their local building codes. The book presents design choices that fall in line with the boundaries defined by professional consensus (building codes), and provides reference material outlining the design criteria contained in building codes. It includes applications for both building and bridge structural design, and it is applicable worldwide, as it is not dependent upon any particular codes. Contains concise coverage that can be taught in one semester Underscores the fundamental principles of behavior Provides students with an understanding of the principles upon which codes are based Assists in navigating the labyrinth of ever-changing codes Fosters an inherent understanding of design The text also provides a brief history of reinforced concrete. While the initial attraction for using reinforced concrete in building construction has been attributed to its fire resistance, its increase in popularity was also due to the creativity of engineers who kept extending its limits of application. Along with height achievement, reinforced concrete gained momentum by providing convenience, plasticity, and low-cost economic appeal. Principles of Reinforced Concrete Design provides undergraduate students with the fundamentals of mechanics and direct observation, as well as the concepts required to design reinforced concrete (RC) structures, and applies to both building and bridge structural design.

Download or read book Reinforced Concrete Structures Analysis and Design written by David D. E. E. Fanella and published by McGraw Hill Professional. This book was released on 2010-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: A PRACTICAL GUIDE TO REINFORCED CONCRETE STRUCTURE ANALYSIS AND DESIGN Reinforced Concrete Structures explains the underlying principles of reinforced concrete design and covers the analysis, design, and detailing requirements in the 2008 American Concrete Institute (ACI) Building Code Requirements for Structural Concrete and Commentary and the 2009 International Code Council (ICC) International Building Code (IBC). This authoritative resource discusses reinforced concrete members and provides techniques for sizing the cross section, calculating the required amount of reinforcement, and detailing the reinforcement. Design procedures and flowcharts guide you through code requirements, and worked-out examples demonstrate the proper application of the design provisions. COVERAGE INCLUDES: Mechanics of reinforced concrete Material properties of concrete and reinforcing steel Considerations for analysis and design of reinforced concrete structures Requirements for strength and serviceability Principles of the strength design method Design and detailing requirements for beams, one-way slabs, two-way slabs, columns, walls, and foundations

Download or read book Reinforced Concrete written by James Grierson MacGregor and published by Prentice Hall. This book was released on 1997 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the 1995 edition of the American Concrete Institute Building Code, this text explains the theory and practice of reinforced concrete design in a systematic and clear fashion, with an abundance of step-by-step worked examples, illustrations, and photographs. The focus is on preparing students to make the many judgment decisions required in reinforced concrete design, and reflects the author's experience as both a teacher of reinforced concrete design and as a member of various code committees. This edition provides new, revised and expanded coverage of the following topics: core testing and durability; shrinkage and creep; bases the maximum steel ratio and the value of the factor on Appendix B of ACI318-95; composite concrete beams; strut-and-tie models; dapped ends and T-beam flanges. It also expands the discussion of STMs and adds new examples in SI units.

Download or read book Reinforced Concrete Design written by William Henry Mosley and published by Palgrave. This book was released on 1990 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ADVANCED REINFORCED CONCRETE DESIGN written by P. C. VARGHESE and published by PHI Learning Pvt. Ltd.. This book was released on 2009-01-09 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended as a companion volume to the author's Limit State Design of Reinforced Concrete (published by Prentice-Hall of India), the Second Edition of this comprehensive and systematically organized text builds on the strength of the first edition, continuing to provide a clear and masterly exposition of the fundamentals of the theory of concrete design. The text meets the twin objective of catering to the needs of the postgraduate students of Civil Engineering and the needs of the practising civil engineers as it focuses also on the practices followed by the industry. This text, along with Limit State Design, covers the entire design practice of revised Code IS456 (2000). In addition, it analyzes the procedures specified in many other BIS codes such as those on winds, earthquakes, and ductile detailing. What's New to This Edition Chapter 18 on Earthquake Forces and Structural Response of framed buildings has been completely revised and updated so as to conform to the latest I.S. Codes 1893 (2002) entitled Criteria for Earthquake Resistant Design of Structures (Part I - Fifth Revision). Chapters 19 and 21 which too deal with earthquake design have been revised. A Summary of elementary design of reinforced concrete members is added as Appendix. Valuable tables and charts are presented to help students and practising designers to arrive at a speedy estimate of the steel requirements in slabs, beams, columns and footings of ordinary buildings.

Download or read book Reinforced Concrete written by B.S. Choo and published by CRC Press. This book was released on 2018-10-08 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of a highly practical text gives a detailed presentation of the design of common reinforced concrete structures to limit state theory in accordance with BS 8110.

Download or read book Reinforced Concrete Design written by Svetlana Brzev and published by . This book was released on 2012-10-23 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced Concrete Design: A Practical Approach, 2E is the only Canadian textbook which covers the design of reinforced concrete structural members in accordance with the CSA Standard A23.3-04 Design of Concrete Structures, including its 2005, 2007, and 2009 amendments, and the National Building Code of Canada 2010. Reinforced Concrete Design: A Practical Approach covers key topics for curriculum of undergraduate reinforced concrete design courses, and it is a useful learning resource for the students and a practical reference for design engineers. Since its original release in 2005 the book has been well received by readers from Canadian universities, colleges, and design offices. The authors have been commended for a simple and practical approach to the subject by students and course instructors. The book contains numerous design examples solved in a step-by-step format. The second edition is going to be available exclusively in hard cover version, and colours have been used to embellish the content and illustrations. This edition contains a new chapter on the design of two-way slabs and numerous revisions of the original manuscript. Design of two-way slabs is a challenging topic for engineering students and young engineers. The authors have made an effort to give a practical design perspective to this topic, and have focused on analysis and design approaches that are widely used in structural engineering practice. The topics include design of two-way slabs for flexure, shear, and deflection control. Comprehensive revisions were made to Chapter 4 to reflect the changes contained in the 2009 amendment to CSA A23.3-04. Chapters 6 and 7 have been revised to correct an oversight related to the transverse reinforcement spacing requirements in the previous edition of the book. Chapter 8 includes a new design example on slender columns and a few additional problems. Several errors and omissions (both text and illustrations) have also been corrected. More than 300 pages of the original book have been revised in this edition. Several supplements are included on the book web site. Readers will get time-limited access to the new column design software BPA COLUMN, which can generate column interaction diagrams for rectangular and cicrcular columns of variable dimensions and reinforcement amount. Additional supplements include spreadsheets related to foundation design and column load take down, and a few Power Point presentations showcasing reinforced concrete structures under construction and in completed form. Instructors will have an access to additional web site, which contains electronic version of the Instructor's Solution Manual with complete solutions to the end-of-chapter problems, and Power Point presentations containing all illustrations from the book. The book is a collaborative effort between an academic and a practising engineer and reflects their unique perspectives on the subject. Svetlana Brzev, Ph.D., P.Eng. is a faculty at the Civil Engineering Department of the British Columbia Institute of Technology, Burnaby, BC. She has over 25 years of combined teaching, research, and consulting experience related to structural design and rehabilitation of concrete and masonry structures, including buildings, municipal, and industrial facilities. John Pao, MEng, PEng, Struct.Eng, is the President of Bogdonov Pao Associates Ltd. of Vancouver, BC, and BPA Group of Companies with offices in Seattle and Los Angeles. Mr. Pao has extensive consulting experience related to design of reinforced concrete buildings, including high-rise residential and office buildings, shopping centers, parking garages, and institutional buildings.

Download or read book Basic Principles of Concrete Structures written by Xianglin Gu and published by Springer. This book was released on 2015-12-09 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the latest version of designing codes both for buildings and bridges (GB50010-2010 and JTG D62-2004), this book starts from steel and concrete materials, whose properties are very important to the mechanical behavior of concrete structural members. Step by step, analysis of reinforced and prestressed concrete members under basic loading types (tension, compression, flexure, shearing and torsion) and environmental actions are introduced. The characteristic of the book that distinguishes it from other textbooks on concrete structures is that more emphasis has been laid on the basic theories of reinforced concrete and the application of the basic theories in design of new structures and analysis of existing structures. Examples and problems in each chapter are carefully designed to cover every important knowledge point. As a basic course for undergraduates majoring in civil engineering, this course is different from either the previously learnt mechanics courses or the design courses to be learnt. Compared with mechanics courses, the basic theories of reinforced concrete structures cannot be solely derived by theoretical analysis. And compared with design courses, this course emphasizes the introduction of basic theories rather than simply being a translation of design specifications. The book will focus on both the theoretical derivations and the engineering practices.

Download or read book Reinforced Concrete Design to Eurocode 2 written by Giandomenico Toniolo and published by Springer. This book was released on 2017-05-09 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the basic mechanical features of concrete and explains the main resistant mechanisms activated in the reinforced concrete structures and foundations when subjected to centred and eccentric axial force, bending moment, shear, torsion and prestressing. It presents a complete set of limit-state design criteria of the modern theory of RC incorporating principles and rules of the final version of the official Eurocode 2. This textbook examines methodological more than notional aspects of the presented topics, focusing on the verifications of assumptions, the rigorousness of the analysis and the consequent degree of reliability of results. Each chapter develops an organic topic, which is eventually illustrated by examples in each final paragraph containing the relative numerical applications. These practical end-of-chapter appendices and intuitive flow-charts ensure a smooth learning experience. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.

Download or read book Unified Theory of Reinforced Concrete written by Thomas T.C. Hsu and published by CRC Press. This book was released on 1992-12-10 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced concrete structures are subjected to a complex variety of stresses and strains. The four basic actions are bending, axial load, shear, and torsion. Presently, there is no single comprehensive theory for reinforced concrete structural behavior that addresses all of these basic actions and their interactions. Furthermore, there is little consistency among countries around the world in their building codes, especially in the specifications for shear and torsion. Unified Theory of Reinforced Concrete addresses this serious problem by integrating available information with new research data, developing one unified theory of reinforced concrete behavior that embraces and accounts for all four basic actions and their combinations. The theory is presented in a systematic manner, elucidating its five component models from a pedagogical and historical perspective while emphasizing the fundamental principles of equilibrium, compatibility, and the constitutive laws of materials. The significance of relationships between models and their intrinsic consistencies are emphasized. This theory can serve as the foundation on which to build a universal design code that can be adopted internationally. In addition to frames, the book explains the fundamental concept of the design of wall-type and shell-type structures. Unified Theory of Reinforced Concrete will be an important reference for all engineers involved in the design of concrete structures. The book can also serve well as a text for a graduate course in structural engineering.

Download or read book Principles of Reinforced Concrete written by Zhenhai Guo and published by Butterworth-Heinemann. This book was released on 2014-07-17 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principle of Reinforced Concrete introduces the main properties of structural concrete and its mechanical behavior under various conditions as well as all aspects of the combined function of reinforcement and concrete. Based on the experimental investigation, the variation regularity of mechanical behavior, working mechanism, and calculation method are presented for the structural member under various internal forces. After examining the basic principle and analysis method of reinforced concrete, the book covers some extreme circumstances, including fatigue load, earthquake, explosion, high temperature (fire accident), and durability damage, and the special responses and analysis methods of its member under these conditions. This work is valuable as a textbook for post-graduates, and can be used as a reference for university teachers and under-graduates in the structural engineering field. It is also useful for structural engineers engaged in scientific research, design, or construction. - Focuses on the principles of reinforced concrete, providing professional and academic readers with a single volume reference - Experimental data enables readers to make full use of the theory presented - The mechanical behavior of both concrete and reinforcement materials, plus the combined function of both are covered, enabling readers to understand the behaviors of reinforced concrete structures and their members - Covers behavior of the materials and members under normal and extreme conditions

Download or read book Reinforced Concrete Design to BS 8110 Simply Explained written by A. Allen and published by CRC Press. This book was released on 2002-12-24 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly successful book describes the background to the design principles, methods and procedures required in the design process for reinforced concrete structures. The easy to follow style makes it an ideal reference for students and professionals alike.

Download or read book Design Handbook for Reinforced Concrete Elements 2 Edition written by Argeo Beletich and published by UNSW Press. This book was released on 2003-04-01 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develops simple theories to help students understand the fundamental principles of reinforced concrete design. Incorporates current Code requirements, as well as design formulas, design charts and design examples which will prove useful both to students and practising engineers.

Download or read book Civil Structural Engineering written by Alan Williams and published by Kaplan AEC Engineering. This book was released on 2004 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything civil and structural engineers in California need to prepare for the seismic design topics of the Special Civil Engineering Exam and California Structural Engineering Exam. This guide emphasizes methods that lead to the quickest and simplest solution to any problem.

Download or read book Reinforced Concrete Design written by Abi O. Aghayere and published by Prentice Hall. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revision of: Reinforced concrete design / George F. Limbrunner, Abi O. Aghayere. 7th ed. 2010.