Download or read book Basic Properties of Dental Composites and Their Impact on Clinical Performance written by Paul Lambrechts and published by . This book was released on 1983 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dental Composite Materials for Direct Restorations written by Vesna Miletic and published by Springer. This book was released on 2017-11-25 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both basic scientific and clinically relevant aspects of dental composite materials with a view to meeting the needs of researchers and practitioners. Following an introduction on their development, the composition of contemporary composites is analyzed. A chapter on polymerization explains the setting reactions and light sources available for light-cured composites. The quality of monomer-to-polymer conversion is a key factor for material properties. Polymerization shrinkage along with the associated stress remains among the most challenging issues regarding composite restorations. A new classification of dental composites is proposed to offer more clinically relevant ways of differentiating between commercially available materials. A review of specific types of composites provides an insight into their key issues. The potential biological issues of dental composites are reviewed in chapters on elution of leachable substances and cariogenicity of resin monomers. Clinical sections focus on material placement, finishing procedures, and the esthetics and clinical longevity of composite restorations. Bonding to tooth tissues is addressed in a separate chapter, as is the efficiency of various composite repair methods. The final chapter discusses future perspectives on dental composite materials.
Download or read book Handbook of Bioceramics and Biocomposites written by Iulian Vasile Antoniac and published by Springer. This book was released on 2016-05-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes several current trends in the development of bioceramics and biocomposites for clinical use in the repair, remodelling, and regeneration of bone tissue. Comprehensive coverage of these materials allows fundamental aspects of the science and engineering to be seen in close relation to the clinical performance of dental and orthopaedic implants. Bioceramics and biocomposites appear to be the most dynamic area of materials development for both tissue engineering and implantable medical devices. Almost all medical specialties will continue to benefit from these developments, but especially dentistry and orthopaedics. In this Handbook, leading researchers describe the use of bionanomaterials to create new functionalities when interfaced with biological molecules or structures. Also described are technologies for bioceramics and biocomposites processing in order to fabricate medical devices for clinical use. Another important section of the book is dedicated to tissue regeneration with development of new matrices. A targeted or personalized treatment device reduces drug consumption and treatment expenses, resulting in benefits to the patient and cost reductions for public health systems. This authoritative reference on the state-of-the-art in the development and use of bioceramics and biocomposites can also serve as the basis of instructional course lectures for audiences ranging from advanced undergraduate students to post-graduates in materials science and engineering and biomedical engineering.
Download or read book Phillips Science of Dental Materials E Book written by Chiayi Shen and published by Elsevier Health Sciences. This book was released on 2021-05-13 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: **Selected for Doody's Core Titles® 2024 with "Essential Purchase" designation in Dentistry** Keep current with the evolving technology of dental materials! Phillips' Science of Dental Materials, 13th Edition provides comprehensive, up-to-date information on the materials used in cosmetic and restorative procedures in dentistry. It introduces the physical and chemical properties that are related to selection and use of dental biomaterials, including their composition, mechanical properties, manipulative variables, and the performance of dental restorations and prostheses. This edition adds three new chapters and hundreds of new full-color photographs. Written by dental scientists Chiayi Shen and H. Ralph Rawls along with prosthodontist Josephine Esquivel-Upshaw, this leading text/reference helps dentists select the right materials for oral procedures and helps dental labs ensure high-quality restorations. - 500 full-color photos and illustrations show concepts, dental instruments, and restorations. - Key terms are defined at the beginning of each chapter, covering terminology related to dental biomaterials and science. - Critical thinking questions stimulate thinking and emphasize important concepts and principles. - Logical, five-part organization of chapters makes the content easier to read and understand, with units on General Classes and Properties of Dental Materials, Direct Restorative Materials, Indirect Restorative Materials, Fabrication of Prostheses, and Assessing Dental Restorations. - Balance between materials science and manipulation bridges the gap of knowledge between dentists and lab technicians. - Major emphasis on biocompatibility serves as a useful guide to the principles and clinical implications of restorative materials safety. - Diverse and respected pool of contributors lends credibility and experience to each dental science topic. - NEW! Three new chapters are added: Digital Technology in Dentistry, In Vitro Research of Dental Materials, and Clinical Research of Restorations.
Download or read book Phillips Science of Dental Materials eBook written by Kenneth J. Anusavice and published by Elsevier Health Sciences. This book was released on 2003-06-30 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 11th edition of this leading reference is an outstanding, scientifically based source of information in the field of dental materials science. It presents up-to-date information on materials that are used in the dental office and laboratory every day, emphasizing practical, clinical use, as well as the physical, chemical, and biological properties of materials. Extensive new clinical photographs in this edition illustrate the topics, and color plates are integrated close to related concepts as they're discussed in each chapter. A new glossary of key terms found at the beginning of every chapter defines terms in the appropriate context of the chapter's discussion. Also in this edition, critical thinking questions throughout the book stimulate the readers' curiosity on specific topics, test their existing knowledge, and heighten their awareness of important or controversial subjects. Content outlines at the beginning of each chapter provide a quick reference for specific topics. The roles played by key organizations in ensuring the safety and efficacy of dental materials and devices are described - such as the American Dental Association, the U.S. Food and Drug Administration, the International Organization for Standardization, and the Fédération Dentaire Internationale. Up-to-date Selected Readings are presented at the end of each chapter to direct readers to supplemental literature on each topic. Numerous boxes and tables throughout summarize and illustrate key concepts and compare characteristics and properties of various dental materials. Distinguished contributors lend their credibility and experience to the text. Content has been completely updated to include information on the most current dental materials available. Glossaries at the beginning of each chapter define key terms used within the context of that chapter. Revised artwork gives this edition a fresh look, with high-quality illustrations and clinical photos to aid in the visualization of materials and procedures described. Reorganization and consolidation of chapters into four major book parts presents the material in a more efficient way: Part I describes the principles of materials science that control the performance of dental materials in dental laboratories, research laboratories, student dental clinics, public health clinics, and private practice clinics. Part II focuses on impression materials, gypsum products, dental waxes, casting investments and procedures, and finishing and polishing abrasives and procedures. Part III provides an updated scientific and applied description of the composition, manipulation principles, properties, and clinical performance of bonded restorations, restorative resins, dental cements, dental amalgams, and direct-filling golds. Part IV presents a basic and applied description of materials that are processed in a laboratory or dental clinic. Critical thinking questions appear in every chapter to stimulate thinking and classroom discussion. The overall design has been improved to provide a more visually appealing format.
Download or read book Quintessence International written by and published by . This book was released on 2009 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Journal of Dentistry written by and published by . This book was released on 2005 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for the Direct Restoration of Teeth written by John Nicholson and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for the Direct Restoration of Teeth focuses on the important role teeth play in our lives and how biomaterials scientists are ensuring that new dental materials are functional and esthetic. As research in the field is shifting away from traditional materials like metal, and towards more advanced materials, such as resins and ceramics, this book on the subject of modern materials for the direct repair of teeth provides readers with a comprehensive reference. The most pertinent modern dental materials and their properties and applications for the direct restoration of teeth are presented, along with case examples and guidance notes making this book an essential companion for materials scientists and clinicians. - Provides comprehensive coverage of conventional and modern materials for direct restoration of teeth - Includes guidance notes and case examples to support dental clinicians in decision-making - Authored by a scientist and a clinician, the book provides a balanced and complete treatise of the subject
Download or read book Dental Clinics of North America written by and published by . This book was released on 1990 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1971 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conventional Microfilled and Hybrid Composite Resins written by Jan W. V. van Dijken and published by . This book was released on 1987 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Symposium on Posterior Composite Resin Dental Restorative Materials written by Guido Vanherle and published by . This book was released on 1985 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the present status and future potential of posterior composite resin restoratives.
Download or read book ASDC Journal of Dentistry for Children written by and published by . This book was released on 1993 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thiol X Chemistries in Polymer and Materials Science written by Andrew B. Lowe and published by Royal Society of Chemistry. This book was released on 2013 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource on thiol-x chemistries for postgraduates, academics and industrial practitioners interested in polymer and materials applications from leading experts in the field.
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dental Items of Significance written by and published by . This book was released on 1996 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotechnology in Endodontics written by Anil Kishen and published by Springer. This book was released on 2015-03-18 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed information on the emerging applications of nanomaterials and nanoparticles within endodontics, highlighting the exciting potential clinical impact of nanotechnology in the field. The range of applications covered is diverse, encompassing drug and gene delivery, tissue engineering, antibacterial strategies, dentin tissue stabilization, dentin pulp regeneration and use in restorative and endodontic materials. Important scientific background information relating to each application is provided, with clear coverage of basic principles. In addition, potential pitfalls are identified and explained. The cytotoxicity of nanomaterials and nanoparticles is also addressed in a separate chapter. The book will be of value both for endodontic practitioners and for all scientists and graduate students who are interested in the application of nanotechnology in endodontics.
