Download or read book Introduction to Nanotechnology written by Charles P. Poole, Jr. and published by John Wiley & Sons. This book was released on 2003-05-30 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-confessed introduction provides technical administrators and managers with a broad, practical overview of the subject and gives researchers working in different areas an appreciation of developments in nanotechnology outside their own fields of expertise.
Download or read book An Introduction to Nanoscience and Nanotechnology written by Alain Nouailhat and published by Wiley-ISTE. This book was released on 2008-01-14 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Part of this book adapted from "Introduction aux nanosciences et aux nanotechnologies" published in France by Hermes Science/Lavoisier in 2006."
Download or read book Basic Principles of Nanotechnology written by Wesley C. Sanders and published by CRC Press. This book was released on 2018-07-11 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book allows the reader to have a basic understanding of the structure and properties of nanoscale materials routinely used in nanotechnology-based research and industries. To add, the book describes the operation of nanoscale transistors and the processes used to fabricate the devices. Additionally, it presents research involving the use of carbon nanotubes, graphene, and molecules to create non-silicon based electronic devices. It aims to provide an understanding of the operation of the most frequently used fabrication and characterization procedures, such as scanning electron microscopy, atomic force microscopy, etch, e-beam lithography, and photolithography. Provides explanations of the common techniques used in nanofabrication. Focuses on nanomaterials that are almost exclusively used in academic research and incorporated in consumer materials, such as carbon nanotubes, graphene, metal nanoparticles, quantum dots, and conductive polymers. Each chapter begins with a list of key objectives describing major content covered. Includes end-of-chapter questions to reinforce chapter content.
Download or read book Nanotechnology written by Mick Wilson and published by CRC Press. This book was released on 2002-06-27 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence of nanoscience portends a revolution in technology that will soon impact virtually every facet of our technological lives. Yet there is little understanding of what it is among the educated public and often among scientists and engineers in other disciplines. Furthermore, despite the emergence of undergraduate courses on the subject, no basic textbooks exist. Nanotechnology: Basic Science and Emerging Technologies bridges the gap between detailed technical publications that are beyond the grasp of nonspecialists and popular science books, which may be more science fiction than fact. It provides a fascinating, scientifically sound treatment, accessible to engineers and scientists outside the field and even to students at the undergraduate level. After a basic introduction to the field, the authors explore topics that include molecular nanotechnology, nanomaterials and nanopowders, nanoelectronics, optics and photonics, and nanobiometrics. The book concludes with a look at some cutting-edge applications and prophecies for the future. Nanoscience will bring to the world technologies that today we can only imagine and others of which we have not yet dreamt. This book lays the groundwork for that future by introducing the subject to those outside the field, sparking the imaginations of tomorrow's scientists, and challenging them all to participate in the advances that will bring nanotechnology's potential to fruition.
Download or read book Introduction to Nano written by Amretashis Sengupta and published by Springer. This book was released on 2015-07-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the basics of nanotechnology and provides a solid understanding of the subject. Starting from a brush-up of the basic quantum mechanics and materials science, the book helps to gradually build up understanding of the various effects of quantum confinement, optical-electronic properties of nanoparticles and major nanomaterials. The book covers the various physical, chemical and hybrid methods of nanomaterial synthesis and nanofabrication as well as advanced characterization techniques. It includes chapters on the various applications of nanoscience and nanotechnology. It is written in a simple form, making it useful for students of physical and material sciences.
Download or read book Introduction to Nanoscience written by Stuart Lindsay and published by OUP Oxford. This book was released on 2009-10-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscience is not physics, chemistry, engineering or biology. It is all of them, and it is time for a text that integrates the disciplines. This is such a text, aimed at advanced undergraduates and beginning graduate students in the sciences. The consequences of smallness and quantum behaviour are well known and described Richard Feynman's visionary essay 'There's Plenty of Room at the Bottom' (which is reproduced in this book). Another, critical, but thus far neglected, aspect of nanoscience is the complexity of nanostructures. Hundreds, thousands or hundreds of thousands of atoms make up systems that are complex enough to show what is fashionably called 'emergent behaviour'. Quite new phenomena arise from rare configurations of the system. Examples are the Kramer's theory of reactions (Chapter 3), the Marcus theory of electron transfer (Chapter 8), and enzyme catalysis, molecular motors, and fluctuations in gene expression and splicing, all covered in the final Chapter on Nanobiology. The book is divided into three parts. Part I (The Basics) is a self-contained introduction to quantum mechanics, statistical mechanics and chemical kinetics, calling on no more than basic college calculus. A conceptual approach and an array of examples and conceptual problems will allow even those without the mathematical tools to grasp much of what is important. Part II (The Tools) covers microscopy, single molecule manipulation and measurement, nanofabrication and self-assembly. Part III (Applications) covers electrons in nanostructures, molecular electronics, nano-materials and nanobiology. Each chapter starts with a survey of the required basics, but ends by making contact with current research literature.
Download or read book Nanophysics and Nanotechnology written by Edward L. Wolf and published by John Wiley & Sons. This book was released on 2015-08-04 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long awaited new edition of this highly successful textbook, provides once more a unique introduction to the concepts, techniques and applications of nanoscale systems by covering its entire spectrum up to recent findings on graphene.
Download or read book Basics of Nanotechnology written by Horst-Günter Rubahn and published by Wiley-VCH. This book was released on 2008-10-20 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extended and revised edition of the successful German version is a clearly structured and easily readable introduction, written by an experienced author with sound knowledge of experimental synthesis and analysis of nanostructures. Developed from courses on nanophysics and nanotechnology, this textbook covers the fundamental physics of nanostructures, methods of growth and manipulation, characterization methods with a focus on optical analyzing methods and nanooptics, a discussion of nano-architectures and the latest applications in optics, electronics, quantum computers, molecular nanostructures, biology and soft matter. This edition also includes an expanded discussion of quantum and classical effects as well as magnetic nanostructures. With its wide range of problems to test the reader's understanding, it is primarily aimed at graduate students with a basic knowledge of solid state physics, but can be equally used as a reference for professionals in physics, chemistry and materials science working on nanosystems, soft matter or biophysical matters.
Download or read book Introduction to Nanoscale Science and Technology written by Massimiliano Ventra and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the reviews: "...A class in nanoscale science and technology is daunting for the educator, who must organize a large collection of materials to cover the field, and for the student, who must absorb all the new concepts. This textbook is an excellent resource that allows students from any engineering background to quickly understand the foundations and exciting advances of the field. The example problems with answers and the long list of references in each chapter are a big plus for course tutors. The book is organized into seven sections. The first, nanoscale fabrication and characterization, covers nanolithography, self-assembly, and scanning probe microscopy. Of these, we enjoyed the section on nanolithography most, as it includes many interesting details from industrial manufacturing processes. The chapter on self-assembly also provides an excellent overview by introducing six types of intermolecular interactions and the ways these can be employed to fabricate nanostructures. The second section covers nanomaterials and nanostructures. Out of its 110 pages, 45 are devoted to carbon nanotubes. Fullerenes and quantum dots each have their own chapter that focuses on the properties and applications of these nanostructures. Nanolayer, nanowire, and nanoparticle composites of metals and semiconductors are briefly covered (just 12 pages), with slightly more discussion of specific applications. The section on nanoscale electronics begins with a history of microelectronics before discussing the difficulties in shrinking transistor size further. The discussion of problems (leakage current, hot electrons, doping fluctuations, etc.) and possible solutions (high- k dielectrics, double-gate devices) could easily motivate deeper discussions of nanoscale electrical transport. A chapter on molecular electronics considers transport through alkanes, molecular transistors, and DNA in a simple, qualitative manner we found highly instructive. Nanoscale magnetic systems are examined in the fourth section. The concept of quantum computation is nicely presented, although the discussion of how this can be achieved with controlled spin states is (perhaps necessarily) not clear. We found the chapter on magnetic storage to be one of the most lucid in the book. The giant magnetoresistive effect, operation of spin valves, and issues in magnetic scaling are easier to understand when placed in the context of the modern magnetic hard disk drive. Micro- and nanoelectromechanical systems are covered with an emphasis on the integration of sensing, computation, and communication. Here, the student can see advanced applications of lithography. The sixth section, nanoscale optoelectronics, describes quantum dots, organic optoelectronics, and photonic crystals. The chapter on organic optoelectronics is especially clear in its discussion of the fundamentals of this complicated field. The book concludes with an overview of nanobiotechnology that covers biomimetics, biomolecular motors, and nanofluidics. Because so many authors have contributed to this textbook, it suffers a bit from repetition. However, this also allows sections to be omitted without any adverse effect on student comprehension. We would have liked to see more technology to balance the science; apart from the chapters on lithography and magnetic storage, little more than an acknowledgment is given to commercial applications. Overall, this book serves as an excellent starting point for the study of nanoscale science and technology, and we recommend it to anyone with a modest scientific background. It is also a great vehicle to motivate the study of science at a time when interest is waning. Nanotechnology educators should look no further." (MATERIALS TODAY, June 2005)
Download or read book Nanotechnology Principles and Practices written by Sulabha K. Kulkarni and published by Springer. This book was released on 2014-11-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the rapid advances in the field, this book offers an up-to-date introduction to nanomaterials and nanotechnology. Though condensed into a relatively small volume, it spans the whole range of multidisciplinary topics related to nanotechnology. Starting with the basic concepts of quantum mechanics and solid state physics, it presents both physical and chemical synthetic methods, as well as analytical techniques for studying nanostructures. The size-specific properties of nanomaterials, such as their thermal, mechanical, optical and magnetic characteristics, are discussed in detail. The book goes on to illustrate the various applications of nanomaterials in electronics, optoelectronics, cosmetics, energy, textiles and the medical field and discusses the environmental impact of these technologies. Many new areas, materials and effects are then introduced, including spintronics, soft lithography, metamaterials, the lotus effect, the Gecko effect and graphene. The book also explains the functional principles of essential techniques, such as scanning tunneling microscopy (STM), atomic force microscopy (AFM), scanning near field optical microscopy (SNOM), Raman spectroscopy and photoelectron microscopy. In closing, Chapter 14, ‘Practicals’, provides a helpful guide to setting up and conducting inexpensive nanotechnology experiments in teaching laboratories.
Download or read book Nanotechnology written by Jeremy Ramsden and published by William Andrew. This book was released on 2016-05-11 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology: An Introduction, Second Edition, is ideal for the newcomer to nanotechnology, someone who also brings a strong background in one of the traditional disciplines, such as physics, mechanical or electrical engineering, or chemistry or biology, or someone who has experience working in microelectromechanical systems (MEMS) technology. This book brings together the principles, theory, and practice of nanotechnology, giving a broad, yet authoritative, introduction to the possibilities and limitations of this exciting and rapidly developing field. The book's author, Prof Ramsden, also discusses design, manufacture, and applications and their impact on a wide range of nanotechnology areas. Provides an overview of the rapidly growing and developing field of nanotechnology Focuses on key essentials, and structured around a robust anatomy of the subject Brings together the principles, theory, and practice of nanotechnology, giving a broad, yet authoritative, introduction to the possibilities and limitations of this exciting and rapidly developing field
Download or read book Introduction To Nanoscience And Nanomaterials written by Dinesh C Agrawal and published by World Scientific Publishing Company. This book was released on 2013-05-20 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is aimed primarily at the senior undergraduate and first year graduate students from the various engineering and sciences departments including physics, chemistry, materials engineering, chemical engineering, electrical engineering, mechanical engineering, bioengineering, and biology. Researchers in the areas of nanomaterials and nanoscience will also find the book useful for building the background necessary to understand the current literature and as a reference book. The text assumes only a basic level of competency in physics, chemistry and mathematics. Some of the background material and introductory matter are included in the first few chapters and as appendices. Although this material may be familiar to some of the students, it is the author's experience after teaching such a course for many years that this can not be taken for granted and moreover, serves as a ready reference to understand the text.As the area of nanoscience, nanotechnology and nanomaterials is a fast developing one, an approach which equips the students to comprehend the developing field rather than providing a large volume of information is essential. With this in view, while providing a broad perspective, the book emphasizes basics of nanoscience and nanoscale materials and goes into sufficient depth for the reader to be able to handle numerical problems. The treatment is kept at a level which is easily comprehensible to an undergraduate student. Solved examples are provided in each chapter to aid understanding and a set of problems is given at the end of each chapter.
Download or read book Introduction To Nanoscience And Nenotechnology written by Chattopadhyay and published by PHI Learning Pvt. Ltd.. This book was released on 2009-12-30 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compact introductory textbook in the emerging discipline of nano-science and nanotechnology, presents the fundamental principles and techniques to students of science and engineering. The book presents the information in a pedagogically sound manner, and is especially designed for students of M.Sc. (Physics) and M.Tech. courses in nanotechnology. With the increasing applications of nonoscience and nanotechnology in the areas of biotechnology, electronics, integrated circuits, chemistry, physics, materials science, etc. the study of nanostructured materials is also becoming a core part of undergraduate and postgraduate courses of many science and engineering disciplines. The book emphasizes the underlying concepts of nanomaterials with neatly drawn diagrams and illustrations. Modern applications are included to highlight the relevance and importance of nanoscience and nanotechnology in everyday life. The book should therefore be of interest to students of several disciplines of science and engineering as well as research scholars.
Download or read book Nanotechnology written by Rakesh K. Sindhu and published by CRC Press. This book was released on 2021-05-27 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Is an ideal introduction for scientists, engineers, researchers, and potential readers in nanotechnology • Allows readers to swiftly clench the discoursed concepts through the overviews of various fields of nanotechnology, concise summaries, and future prospects presented in the chapters • Discusses the design, methods of production and applications, and their impression on widespread areas of nanotechnology • Is illustrated throughout with excellent figures and has references accompanying each chapter
Download or read book Introduction to Nanomaterials and Devices written by Omar Manasreh and published by John Wiley & Sons. This book was released on 2011-12-13 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: An invaluable introduction to nanomaterials and their applications Offering the unique approach of applying traditional physics concepts to explain new phenomena, Introduction to Nanomaterials and Devices provides readers with a solid foundation on the subject of quantum mechanics and introduces the basic concepts of nanomaterials and the devices fabricated from them. Discussion begins with the basis for understanding the basic properties of semiconductors and gradually evolves to cover quantum structures—including single, multiple, and quantum wells—and the properties of nanomaterial systems, such as quantum wires and dots. Written by a renowned specialist in the field, this book features: An introduction to the growth of bulk semiconductors, semiconductor thin films, and semiconductor nanomaterials Information on the application of quantum mechanics to nanomaterial structures and quantum transport Extensive coverage of Maxwell-Boltzmann, Fermi-Dirac, and Bose-Einstein stastistics An in-depth look at optical, electrical, and transport properties Coverage of electronic devices and optoelectronic devices Calculations of the energy levels in periodic potentials, quantum wells, and quantum dots Introduction to Nanomaterials and Devices provides essential groundwork for understanding the behavior and growth of nanomaterials and is a valuable resource for students and practitioners in a field full of possibilities for innovation and invention.
Download or read book Basic of Nano Technology written by Dr. Sangshetty Kalyane and published by Horizon Books ( A Division of Ignited Minds Edutech P Ltd). This book was released on 2017-04-01 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text book presents a basic scope of Nanoscience and Nanotechnology, focusing on key essentials, origin of nanotechnology, definition of Nanoscience and Nanotechnology and delivers simple examples of applications in various fields. The textbook is relevant academically for undergraduate and graduate students in majors such as Chemical Engineering, Material Science, Electrical Engineering, Bioengineering, Nanoscience, since it would assist in understanding the main concepts of nanotechnology.
Download or read book Gateway to Nanotechnology written by Paul Sanghera and published by Booksurge Publishing. This book was released on 2009-04-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Paul Sanghera, the best selling author of several books in science and technology, introduces the reader to the huge, complex world of nanotechnology in an easy-to-understand way. The beginner students and professionals in nanotechnology can benefit the most from this book. Also the busy executives and managers will find this book helpful as a quick introduction to nanotechnology. The material is presented in the format of lecture notes, which are self-contained, comprehensive within the scope of the book, and presented in an easy-to-follow logical learning sequence. All concepts are explained from scratch with enough examples and exercises. The book covers a wide spectrum of topics in nanotechnology including science behind nanotechnology; nanomaterial characterization; nanofabrication; nanooptics; Nanoelectronics; Nanobiotechnology; business and applications of nanotechnology; and environmental, health, and safety implications of nanotechnology.