Download or read book Basic Course in Race Car Technology written by Lars Frömmig and published by Springer Nature. This book was released on 2023-03-28 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the book is on the driving dynamics of racing vehicles. The interaction of the tyre, the aerodynamics, of the chassis and the limited slip differential specific to racing vehicles is dealt with. A chapter on the basics of vehicle dynamics makes it possible to get started with this topic even without prior automotive engineering training. A historical review and a consideration of the essential safety aspects create an understanding of higher-level requirements, which are specified, for example, by the technical regulations.
Download or read book Race Car Technology Full Course written by Bob Bolles and published by Crd Publishing. This book was released on 2019-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Full Course RCT book will help you avoid the trial-and-error approach to chassis setup. It will teach you sound, proven technology that is both easy to understand and easy to use, so you can set up your race car in the shop and see the positive results on the track immediately, with very little tweaking. What follows is a common-sense approach to chassis setup, vehicle dynamics and race-car design, founded on solid engineering theory. However, you will need to have an open mind, and be willing to accept new ideas that may go against previous chassis setup thinking. Just to make it clear, the technology presented here applies to all race cars, from quarter midgets to Formula One and everything in between. This book tends to lean towards stock car racing because it represents most of the world's automobile racing. But know that not only will be useful for all forms of circle track racing from asphalt types to dirt cars, a great deal of the technology applies to all race cars.
Download or read book Analysis Techniques for Racecar Data Acquisition written by Jorge Sergers and published by SAE International. This book was released on 2014-02-24 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Racecar data acquisition used to be limited to well-funded teams in high-profile championships. Today, the cost of electronics has decreased dramatically, making them available to everyone. But the cost of any data acquisition system is a waste of money if the recorded data is not interpreted correctly. This book, updated from the best-selling 2008 edition, contains techniques for analyzing data recorded by any vehicle's data acquisition system. It details how to measure the performance of the vehicle and driver, what can be learned from it, and how this information can be used to advantage next time the vehicle hits the track. Such information is invaluable to racing engineers and managers, race teams, and racing data analysts in all motorsports. Whether measuring the performance of a Formula One racecar or that of a road-legal street car on the local drag strip, the dynamics of vehicles and their drivers remain the same. Identical analysis techniques apply. Some race series have restricted data logging to decrease the team’s running budgets. In these cases it is extremely important that a maximum of information is extracted and interpreted from the hardware at hand. A team that uses data more efficiently will have an edge over the competition. However, the ever-decreasing cost of electronics makes advanced sensors and logging capabilities more accessible for everybody. With this comes the risk of information overload. Techniques are needed to help draw the right conclusions quickly from very large data sets. In addition to updates throughout, this new edition contains three new chapters: one on techniques for analyzing tire performance, one that provides an introduction to metric-driven analysis, a technique that is used throughout the book, and another that explains what kind of information the data contains about the track.
Download or read book Race Cars written by Josh Gregory and published by Children's Press. This book was released on 2014-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Learn about the history of auto racing and find out what it takes to make it in this exciting career field"--
Download or read book Advanced Race Car Chassis Technology HP1562 written by Bob Bolles and published by Penguin. This book was released on 2010-11-02 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details how to design, build, and setup the chassis and suspension for road race and stock cars. Includes chassis dynamics, spring and shock theory, front and rear suspension geometry, real world racing aerodynamics, steering systems, racing chassis software and all you need to know to set you chassis up to win races.
Download or read book Basic Motorsport Engineering written by Andrew Livesey and published by Routledge. This book was released on 2012-05-23 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motorsport is not just about the spectacle of some of the world's most popular and famous sporting events - it also plays a crucial role in developing new techniques and technologies. Each unit in the IMI and EAL level 2 courses are covered in full, and the chapters can be easily matched to the BTEC First course structure. The book covers introductory topics in motorsport from vehicle science and maths through the basics of vehicle maintenance to pre and post race inspections. Written by an experienced teacher and author with decades of involvement with the industry, packed with detailed colour illustrations and learning tips, Basic Motorsport Engineering is the perfect textbook for you to make the first move into this most dynamic of industries.
Download or read book Racecar written by Matt Brown and published by Matt Brown. This book was released on 2011 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2006, a small unavailing university auto racing team began building a racecar that would challenge the best engineering schools in the world. With fewer people and resources than any of the top competitors, the only way they were going to win was to push the limit, go for broke, and hope for more than a little luck. By the time they got to the racetrack, they knew: In the fog of fierce competition, whether you win or lose, you learn the hardest lessons about engineering, teamwork, friendship, and yourself.
Download or read book Race Car Aerodynamics written by J Katz and published by Robert Bentley, Incorporated. This book was released on 1996-03-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to summarize the secrets of the rapidly developing field of high-speed vehicle design. From F1 to Indy Car, Drag and Sedan racing, this book provides clear explanations for engineers who want to improve their design skills and enthusiasts who simply want to understand how their favorite race cars go fast. Explains how aerodynamics win races, why downforce is more important than streamlining and drag reduction, designing wings and venturis, plus wind tunnel designs and more.
Download or read book Race Car Vehicle Dynamics Set written by William F. Milliken and published by Society of Automotive Engineers. This book was released on 1997-11 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set includes Race Car Vehicle Dynamics, and Race Car Vehicle Dynamics - Problems, Answers and Experiments. Written for the engineer as well as the race car enthusiast, Race Car Vehicle Dynamics includes much information that is not available in any other vehicle dynamics text. Truly comprehensive in its coverage of the fundamental concepts of vehicle dynamics and their application in a racing environment, this book has become the definitive reference on this topic. Although the primary focus is on the race car, the engineering fundamentals detailed are also applicable to passenger car design and engineering. Authors Bill and Doug Milliken have developed many of the original vehicle dynamics theories and principles covered in this book, including the Moment Method, "g-g" Diagram, pair analysis, lap time simulation, and tyre data normalization. The book also includes contributions from other experts in the field. Chapters cover: *The Problem Imposed by Racing *Tire Behavior *Aerodynamic Fundamentals *Vehicle Axis Systems and more. Written for the engineer as well as the race car enthusiast and students, the companion workbook to the original classic book, Race Car Vehicle Dynamics, includes: *Detailed worked solutions to all of the problems *Problems for every chapter in Race Car Vehicle Dynamics, including many new problems *The Race Car Vehicle Dynamics Program Suite (for Windows) with accompanying exercises *Experiments to try with your own vehicle *Educational appendix with additional references and course outlines *Over 90 figures and graphs This workbook is widely used as a college textbook and has been an SAE International best seller since it's introduction in 1995.
Download or read book Complete vehicle written by Michael Trzesniowski and published by Springer Nature. This book was released on 2023-04-03 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the reader learns the essential differences to the passenger car through the analysis divided according to assemblies. This gives him the tools to apply the detailed knowledge acquired to the design and development of competition vehicles. The course for a successful car is set in the concept phase. For this reason, it is given a lot of space and associated design-related areas such as the choice of materials, lightweight construction, design principles, reliability, etc. are discussed. When considering the vehicle as a whole, however, safety systems (rollover device, crash elements, restraining ropes), the cockpit (driver position, seat with restraint system, steering wheel, gearshift, pedal system), the frame or monocoque, the outer skin and aerodynamic devices (ventilation, aerodynamic drag, downforce) must not be omitted. The detailed, in-depth presentation makes the work just as suitable for the interested motorsport enthusiast as it is for the engineer with a practical interest in questions relating to the complete vehicle. The formula material is prepared in such a way that the book can also be used as a reference work. .
Download or read book Suspension System written by Michael Trzesniowski and published by Springer Nature. This book was released on 2023-04-17 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the reader learns the essential differences to the passenger car through the analysis divided according to assemblies. This gives him the tools to apply the detailed knowledge he has acquired to the design and development of competition vehicles. The chassis determines the driving behaviour and thus the "DNA" of a racing vehicle like no other assembly. Starting with the tyre - the decisive mechanical component - all the components of the wheel suspension including steering and braking system are presented and discussed. The focus is on the double wishbone and suspension strut axles. The design of wheel suspensions starts with kinematic considerations, leads via component design to considerations of the vehicle dynamics. Ultimately, the maximum forces of the tires in the transverse and circumferential directions are to be exploited while keeping the vehicle controllable. Due to the detailed, in-depth presentation, the work is just as suitable for the interested motorsport enthusiast as it is for the engineer in practice who is dealing with questions relating to racing suspensions. The formula material is prepared in such a way that the book can also be used as a reference work.
Download or read book Powertrain written by Michael Trzesniowski and published by Springer Nature. This book was released on 2023-03-02 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the reader learns the essential differences to the passenger car through the analysis divided according to assemblies. This gives him the tools to apply the detailed knowledge acquired to the design and development of competition vehicles. In the case of internal combustion engines, the focus is on performance-enhancing measures for racing vehicles. From the choice of the number of cylinders to the intake system to the exhaust system, the lever can be applied to every assembly. For electric drives, the traction battery, cell selection, cooling and operating strategy are considered in more detail. Energy recovery systems are an interesting enhancement for hybrid vehicles and all-electric powertrains, especially in strategic considerations for racing. Finally, gearboxes are needed independently of the drive source, albeit matched to it, so that the full potential can be exploited. The detailed, in-depth presentation makes this work just as suitable for the interested motorsport enthusiast as it is for the engineer in the field who is addressing the issues surrounding race car powertrains. The formula material is prepared in such a way that the book can also be used as a reference work.
Download or read book A Practical Guide to Race Car Data Analysis written by Bob Knox and published by Createspace Independent Publishing Platform. This book was released on 2011-03-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Race Car Data Analysis was written for the amateur and lower-level professional racers who either have a data system in their cars or who may be thinking about installing one but who do not have access to an experienced data engineer. Many of the data systems available today at reasonable prices offer capabilities that only professional race teams could afford just a few years ago. Unfortunately, most of these racers do not know how to use more than a small part of those capabilities. Using real track data, numerous real-world examples, and more than 200 illustrations, the Guide gives them the knowledge and skills they need to select, configure and use their data systems efficiently and effectively.Beginning with a detailed discussion of the things racers need to know about the hardware and software necessary for a an effective data system, the Guide continues with chapters on basic data analysis tools, more sophisticated data analysis tools like x-y plots and math channels, damper potentiometers and the wealth of important data they produce, brake and clutch pressure sensors, and creative use of math channels. The Guide concludes with a comprehensive scheme for analyzing data, examples of the data views used with the scheme, and detailed information on how to create and configure the data views.
Download or read book Speed Secrets written by Ross Bentley and published by Motorbooks. This book was released on 1998-08-13 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shave lap times or find a faster line through your favorite set of S-curves with professional race driver Ross Bentley as he shows you the quickest line from apex to apex! With tips and commentary from current race drivers, Bentley covers the vital techniques of speed, from visualizing lines to interpreting tire temps to put you in front of the pack. Includes discussion of practice techniques, chassis set-up, and working with your pit chief.
Download or read book Race Car Technology Limited Edition written by Bob Bolles and published by . This book was released on 2019-07 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Golden Age of the American Racing Car written by Griffith Borgeson and published by SAE International. This book was released on 1998-12-12 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: A best seller and winner of the Antique Automobile Club of America's prestigious Thomas McKean Award.The Golden Age of the American Racing Car emphasizes the human side of racing history, offering insight into the men who shaped the golden age. Covering a period of time from the 1910s through the 1930s, the book describes the historical development of race car technology and presents fascinating information on race courses, designers, builders, drivers, and events. Racing pioneers covered include: Fred Duesenberg, Louis Chevrolet, Harry Miller, Leo Goossen, and Fred Offenhauser.
Download or read book Advances in Italian Mechanism Science written by Giuseppe Quaglia and published by Springer Nature. This book was released on with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
