Download or read book Ballistic Heat Transport in Semiconductor Thin Films written by Pavel Abumov and published by . This book was released on 2011 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Transport in Semiconductors written by Pol Torres Alvarez and published by Springer. This book was released on 2018-06-28 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from a broad overview of heat transport based on the Boltzmann Transport Equation, this book presents a comprehensive analysis of heat transport in bulk and nanomaterials based on a kinetic-collective model (KCM). This has become key to understanding the field of thermal transport in semiconductors, and represents an important stride. The book describes how heat transport becomes hydrodynamic at the nanoscale, propagating very much like a viscous fluid and manifesting vorticity and friction-like behavior. It introduces a generalization of Fourier’s law including a hydrodynamic term based on collective behavior in the phonon ensemble. This approach makes it possible to describe in a unifying way recent experiments that had to resort to unphysical assumptions in order to uphold the validity of Fourier’s law, demonstrating that hydrodynamic heat transport is a pervasive type of behavior in semiconductors at reduced scales.
Download or read book Ultrafast Electro thermal Transport Through Nanoscale Electronic Materials and Interfaces written by Christopher Perez and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although silicon-based nanofabrication technology has satisfied computational demands for decades, the aggressive scaling of complementary metal oxide semiconductor (CMOS) technology to sub-5 nm geometries poses challenges that must be addressed at the materials level. One example is tuning electro-thermal transport in metal nanostructures to enhance the transfer of information and the dissipation of heat in integrated circuits. The manipulation of these pathways can be further optimized by integrating low-temperature passivation materials with varying thermal conductivities. Furthermore, the emergence of photonic interconnects presents an opportunity for the integration of electro-optic components that rely heavily on the movement, transfer, and recombination of charge carriers within photosensitive materials. All the above are governed by the fundamental limits of physical transfer mechanisms in semiconductors, bringing electron and phonon engineering --the control of heat and charge carriers in materials-- to the forefront of CMOS hardware design. This work explores the fundamental mechanisms and limits of electron-phonon transport in four individual material systems which can comprise different parts of a broader, electro-thermally optimized electronic system using primarily time-domain thermoreflectance (TDTR) and scanning ultrafast electron microscopy (SUEM) as probes. First, we discuss the electro-thermal characterization of iridium (Ir) as an emerging metal for high aspect ratio nanostructures on account of its favorable resistivity scaling with thickness. The exceptionally defect-free metal films offer minimal confounding microstructural effects and allow the probing of thermal anisotropy and cross-plane quasi-ballistic thermal transport in epitaxial Ir(001) interposed between Al and MgO(001). Such effects reveal a transition between three dominant cross-plane thermal transport mechanisms which include electron dominant, phonon dominant, and electron-phonon energy conversion dominant regimes at different thicknesses. Finally, we develop a phenomenological model that correctly describes the dominant transport regimes, providing insight into the thickness-dependent interplay between carriers in metals as well as enabling quick evaluation and potential scalability to broader material systems. Next, we describe defect-modulated thermal transport in sputtered aluminum nitride (AlN) thin films for enabling wide-bandgap (WBG), high-temperature, and high-power electronic devices deposited at back-end of the line (BEOL) compatible temperatures (
Download or read book First Principles Modeling of Phonon Heat Conduction in Nanoscale Crystalline Structures written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The inability to remove heat efficiently is currently one of the stumbling blocks toward further miniaturization and advancement of electronic, optoelectronic, and micro-electro-mechanical devices. In order to formulate better heat removal strategies and designs, it is first necessary to understand the fundamental mechanisms of heat transport in semiconductor thin films. Modeling techniques, based on first principles, can play the crucial role of filling gaps in our understanding by revealing information that experiments are incapable of. Heat conduction in crystalline semiconductor films occurs by lattice vibrations that result in the propagation of quanta of energy called phonons. If the mean free path of the traveling phonons is larger than the film thickness, thermodynamic equilibrium ceases to exist, and thus, the Fourier law of heat conduction is invalid. In this scenario, bulk thermal conductivity values, which are experimentally determined by inversion of the Fourier law itself, cannot be used for analysis. The Boltzmann Transport Equation (BTE) is a powerful tool to treat non-equilibrium heat transport in thin films. The BTE describes the evolution of the number density (or energy) distribution for phonons as a result of transport (or drift) and inter-phonon collisions. Drift causes the phonon energy distribution to deviate from equilibrium, while collisions tend to restore equilibrium. Prior to solution of the BTE, it is necessary to compute the lifetimes (or scattering rates) for phonons of all wave-vector and polarization. The lifetime of a phonon is the net result of its collisions with other phonons, which in turn is governed by the conservation of energy and momentum during the underlying collision processes. This research project contributed to the state-of-the-art in two ways: (1) by developing and demonstrating a calibration-free simple methodology to compute intrinsic phonon scattering (Normal and Umklapp processes) time scales with the inclusion of optical phonons, and (2) by developing a suite of numerical algorithms for solution of the BTE for phonons. The suite of numerical algorithms includes Monte Carlo techniques and deterministic techniques based on the Discrete Ordinates Method and the Ballistic-Diffusive approximation of the BTE. These methods were applied to calculation of thermal conductivity of silicon thin films, and to simulate heat conduction in multi-dimensional structures. In addition, thermal transport in silicon nanowires was investigated using two different first principles methods. One was to apply the Green-Kubo formulation to an equilibrium system. The other was to use Non-Equilibrium Molecular Dynamics (NEMD). Results of MD simulations showed that the nanowire cross-sectional shape and size significantly affects the thermal conductivity, as has been found experimentally. In summary, the project clarified the role of various phonon modes - in particular, optical phonon - in non-equilibrium transport in silicon. It laid the foundation for the solution of the BTE in complex three-dimensional structures using deterministic techniques, paving the way for the development of robust numerical tools that could be coupled to existing device simulation tools to enable coupled electro-thermal modeling of practical electronic/optoelectronic devices. Finally, it shed light on why the thermal conductivity of silicon nanowires is so sensitive to its cross-sectional shape.
Download or read book Thermal Conductivity Measurements in Atomically Thin Materials and Devices written by T. Serkan Kasirga and published by Springer Nature. This book was released on 2020-05-19 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the thermal feasibility of using materials with atomically thin layers such as graphene and the transition metal dichalcogenides family in electronics and optoelectronics applications. The focus is on thermal conductivity measurement techniques currently available for the investigation of thermal performance at the material and device level. In addition to providing detailed information on the available techniques, the book introduces readers to novel techniques based on photothermal effects.
Download or read book Modeling Self Heating Effects in Nanoscale Devices written by Katerina Raleva and published by Morgan & Claypool Publishers. This book was released on 2017-09-13 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is generally acknowledged that modeling and simulation are preferred alternatives to trial and error approaches to semiconductor fabrication in the present environment, where the cost of process runs and associated mask sets is increasing exponentially with successive technology nodes. Hence, accurate physical device simulation tools are essential to accurately predict device and circuit performance. Accurate thermal modelling and the design of microelectronic devices and thin film structures at the micro- and nanoscales poses a challenge to electrical engineers who are less familiar with the basic concepts and ideas in sub-continuum heat transport. This book aims to bridge that gap. Efficient heat removal methods are necessary to increase device performance and device reliability. The authors provide readers with a combination of nanoscale experimental techniques and accurate modelling methods that must be employed in order to determine a device's temperature profile.
Download or read book Thermal Transport in Nanostructured Thin Films for Thermoelectric Applications written by Suzanne Lee Singer and published by . This book was released on 2009 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Fourier Heat Conduction written by Alexander I. Zhmakin and published by Springer Nature. This book was released on 2023-07-01 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad and well-structured overview of various non-Fourier heat conduction models. The classical Fourier heat conduction model is valid for most macroscopic problems. However, it fails when the wave nature of the heat propagation becomes dominant and memory or non-local spatial effects become significant; e.g., during ultrafast heating, heat transfer at the nanoscale, in granular and porous materials, at extremely high values of the heat flux, or in heat transfer in biological tissues. The book looks at numerous non-Fourier heat conduction models that incorporate time non-locality for materials with memory, such as hereditary materials, including fractional hereditary materials, and/or spatial non-locality, i.e. materials with a non-homogeneous inner structure. Beginning with an introduction to classical transport theory, including phase-lag, phonon, and thermomass models, the book then looks at various aspects of relativistic and quantum transport, including approaches based on the Landauer formalism as well as the Green-Kubo theory of linear response. Featuring an appendix that provides an introduction to methods in fractional calculus, this book is a valuable resource for any researcher interested in theoretical and numerical aspects of complex, non-trivial heat conduction problems.
Download or read book Computational Electronics written by Dragica Vasileska and published by CRC Press. This book was released on 2017-12-19 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting with the simplest semiclassical approaches and ending with the description of complex fully quantum-mechanical methods for quantum transport analysis of state-of-the-art devices, Computational Electronics: Semiclassical and Quantum Device Modeling and Simulation provides a comprehensive overview of the essential techniques and methods for effectively analyzing transport in semiconductor devices. With the transistor reaching its limits and new device designs and paradigms of operation being explored, this timely resource delivers the simulation methods needed to properly model state-of-the-art nanoscale devices. The first part examines semiclassical transport methods, including drift-diffusion, hydrodynamic, and Monte Carlo methods for solving the Boltzmann transport equation. Details regarding numerical implementation and sample codes are provided as templates for sophisticated simulation software. The second part introduces the density gradient method, quantum hydrodynamics, and the concept of effective potentials used to account for quantum-mechanical space quantization effects in particle-based simulators. Highlighting the need for quantum transport approaches, it describes various quantum effects that appear in current and future devices being mass-produced or fabricated as a proof of concept. In this context, it introduces the concept of effective potential used to approximately include quantum-mechanical space-quantization effects within the semiclassical particle-based device simulation scheme. Addressing the practical aspects of computational electronics, this authoritative resource concludes by addressing some of the open questions related to quantum transport not covered in most books. Complete with self-study problems and numerous examples throughout, this book supplies readers with the practical understanding required to create their own simulators.
Download or read book ITHERM written by and published by . This book was released on 2004 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Growth and Transport in Nanostructured Materials written by Angel Yanguas-Gil and published by Springer. This book was released on 2016-11-30 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will address the application of gas phase thin film methods, including techniques such as evaporation, sputtering, CVD, and ALD to the synthesis of materials on nanostructured and high aspect-ratio high surface area materials. We have chosen to introduce these topics and the different application fields from a chronological perspective: we start with the early concepts of step coverage and later conformality in semiconductor manufacturing, and how later on the range of application branched out to include others such as energy storage, catalysis, and more broadly nanomaterials synthesis. The book will describe the ballistic and continuum descriptions of gas transport on nanostructured materials and then will move on to incorporate the impact of precursor-surface interaction. We will finally conclude approaching the subjects of feature shape evolution and the connection between nano and reactor scales and will briefly present different advanced algorithms that can be used to effectively compute particle transport, in some cases borrowing from other disciplines such as radiative heat transfer. The book gathers in a single place information scattered over thirty years of scientific research, including the most recent results in the field of Atomic Layer Deposition. Besides a mathematical description of the fundamentals of thin film growth in nanostructured materials, it includes analytic expressions and plots that can be used to predict the growth using gas phase synthesis methods in a number of ideal approximations. The focus on the fundamental aspects over particular processes will broaden the appeal and the shelf lifetime of this book. The reader of this book will gain a thorough understanding on the coating of high surface area and nanostructured materials using gas phase thin film deposition methods, including the limitations of each technique. Those coming from the theoretical side will gain the knowledge required to model the growth process, while those readers more interested in the process development will gain the theoretical understanding will be useful for process optimization.
Download or read book Microscale Energy Transfer written by Chan L. Tien and published by CRC Press. This book was released on 1997-11-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the field of microscale heat transfer in mechanical engineering. Experts from a wide range of science and engineering disciplines present topics that are built from simple macroscopic concepts and gradually lead into microscopic concepts. The book begins with an introductory chapter which discusses the history and the future directions of microscale heat transfer. It is then divided into two sections: the Fundamentals and the Applications.
Download or read book The CRC Handbook of Thermal Engineering written by Frank Kreith and published by Springer Science & Business Media. This book was released on 2000-02-01 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in its in-depth coverage of heat transfer and fluid mechanics including numerical and computer methods, applications, thermodynamics and fluid mechanics. It will serve as a comprehensive resource for professional engineers well into the new millennium. Some of the material will be drawn from the "Handbook of Mechanical Engineering," but with expanded information in such areas as compressible flow and pumps, conduction, and desalination.
Download or read book Journal of Heat Transfer written by and published by . This book was released on 2008 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nano Microscale Heat Transfer written by Zhuomin M. Zhang and published by Springer Nature. This book was released on 2020-06-23 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: This substantially updated and augmented second edition adds over 200 pages of text covering and an array of newer developments in nanoscale thermal transport. In Nano/Microscale Heat Transfer, 2nd edition, Dr. Zhang expands his classroom-proven text to incorporate thermal conductivity spectroscopy, time-domain and frequency-domain thermoreflectance techniques, quantum size effect on specific heat, coherent phonon, minimum thermal conductivity, interface thermal conductance, thermal interface materials, 2D sheet materials and their unique thermal properties, soft materials, first-principles simulation, hyperbolic metamaterials, magnetic polaritons, and new near-field radiation experiments and numerical simulations. Informed by over 12 years use, the author’s research experience, and feedback from teaching faculty, the book has been reorganized in many sections and enriched with more examples and homework problems. Solutions for selected problems are also available to qualified faculty via a password-protected website.• Substantially updates and augments the widely adopted original edition, adding over 200 pages and many new illustrations;• Incorporates student and faculty feedback from a decade of classroom use;• Elucidates concepts explained with many examples and illustrations;• Supports student application of theory with 300 homework problems;• Maximizes reader understanding of micro/nanoscale thermophysical properties and processes and how to apply them to thermal science and engineering;• Features MATLAB codes for working with size and temperature effects on thermal conductivity, specific heat of nanostructures, thin-film optics, RCWA, and near-field radiation.
Download or read book Thermal Control Thin Films written by Jia-wen Qiu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-11-08 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents up-to-date thermal control film materials, technologies and applications in spacecraft. Commonly used thermal control film materials and devices for spacecraft are discussed in detail, including single-structure passive thermal control film materials, composite structure passive thermal control film materials, intelligent thermal control film materials, and microstructure thermal control thin film devices.
Download or read book Nanoscale Energy Transport and Conversion written by Gang Chen and published by Oxford University Press. This book was released on 2005-03-03 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a graduate level textbook in nanoscale heat transfer and energy conversion that can also be used as a reference for researchers in the developing field of nanoengineering. It provides a comprehensive overview of microscale heat transfer, focusing on thermal energy storage and transport. Chen broadens the readership by incorporating results from related disciplines, from the point of view of thermal energy storage and transport, and presents related topics on the transport of electrons, phonons, photons, and molecules. This book is part of the MIT-Pappalardo Series in Mechanical Engineering.
