Download or read book Balancing Sequencing and Determining the Number and Length of Workstations in a Mixed Model Assembly Line written by Fatemeh Mohebalizadehgashti and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The single model assembly line is a traditional type of assembly line, which assembles only one product in a large quantity. On the other hand, the mixed model assembly line assembles different models of a product simultaneously. Therefore, it gives a chance to companies to retain the market by satisfying various demands of customers. Because of this advantage, companies are motivated to change their assembly line from the single model to the mixed model. Balancing and sequencing problems are two important challenges in the mixed model assembly line. There are a large number of studies that have focused on balancing and sequencing problems separately. However, in this thesis, we study balancing and sequencing problems of the mixed model assembly line simultaneously. A mixed integer linear programming model is proposed to solve these problems simultaneously when the assembly line has the continuous motion and when common tasks between different models of a product can be assigned to different workstations. Objectives in this thesis are minimizing the length of workstations, minimizing the stations cost, and minimizing the tasks duplication cost. A branch and bound algorithm is exploited to solve the model. Following that, the proposed model is extended to show that it can satisfy the assembly line with the synchronous configuration. At the next step, a hybrid genetic algorithm, which is a combination of the genetic algorithm and linear programming algorithm, is employed to solve the proposed model for large size problems. Finally, numerical examples are presented to show how the proposed hybrid genetic algorithm solves the proposed model effectively.
Download or read book Balancing and Sequencing of Assembly Lines written by Armin Scholl and published by Physica. This book was released on 1999-02-26 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with two main decision problems which arise when flow-line production systems are installed and operated. The assembly line balancing problem consists of partitioning the work, necessary to assemble the product(s), among different stations of an assembly line. If several models of a product are jointly processed on a line, this medium-term problem is connected with the short-term problem of determining an operating sequence of the models. In Part I balancing and sequencing problems are discussed, classified, and arranged within a hierarchical planning system. In the present second edition special emphasis is given to u-shaped assembly lines which are important components of modern just-in-time production systems. Part II is concerned with exact and heuristic procedures for solving those decision problems. For each problem type considered, a survey of existing procedures is given and new efficient solution methods are developed. Comprehensive numerical investigations showing the effectiveness of the new methods and their superiority over existing approaches are reported.
Download or read book Assembly Line Design written by Brahim Rekiek and published by Springer Science & Business Media. This book was released on 2006-04-21 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient assembly line design is a problem of considerable industrial importance. Assembly Line Design will be bought by technical personnel working in design, planning and production departments in industry as well as managers in industry who want to learn more about concurrent engineering. This book will also be purchased by researchers and postgraduate students in mechanical, manufacturing or micro-engineering.
Download or read book Assembly Line written by Waldemar Grzechca and published by BoD – Books on Demand. This book was released on 2011-08-17 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: An assembly line is a manufacturing process in which parts are added to a product in a sequential manner using optimally planned logistics to create a finished product in the fastest possible way. It is a flow-oriented production system where the productive units performing the operations, referred to as stations, are aligned in a serial manner. The present edited book is a collection of 12 chapters written by experts and well-known professionals of the field. The volume is organized in three parts according to the last research works in assembly line subject. The first part of the book is devoted to the assembly line balancing problem. It includes chapters dealing with different problems of ALBP. In the second part of the book some optimization problems in assembly line structure are considered. In many situations there are several contradictory goals that have to be satisfied simultaneously. The third part of the book deals with testing problems in assembly line. This section gives an overview on new trends, techniques and methodologies for testing the quality of a product at the end of the assembling line.
Download or read book Manufacturing Systems Engineering written by Katsundo Hitomi and published by Routledge. This book was released on 2017-10-19 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the classic textbook has been written to provide a completely up-to-date text for students of mechanical, industrial, manufacturing and production engineering, and is an indispensable reference for professional industrial engineers and managers. In his outstanding book, Professor Katsundo Hitomi integrates three key themes into the text: * manufacturing technology * production management * industrial economics Manufacturing technology is concerned with the flow of materials from the acquisition of raw materials, through conversion in the workshop to the shipping of finished goods to the customer. Production management deals with the flow of information, by which the flow of materials is managed efficiently, through planning and control techniques. Industrial economics focuses on the flow of production costs, aiming to minimise these to facilitate competitive pricing. Professor Hitomi argues that the fundamental purpose of manufacturing is to create tangible goods, and it has a tradition dating back to the prehistoric toolmakers. The fundamental importance of manufacturing is that it facilitates basic existence, it creates wealth, and it contributes to human happiness - manufacturing matters. Nowadays we regard manufacturing as operating in these other contexts, beyond the technological. It is in this unique synthesis that Professor Hitomi's study constitutes a new discipline: manufacturing systems engineering - a system that will promote manufacturing excellence. Key Features: * The classic textbook in manufacturing engineering * Fully revised edition providing a modern introduction to manufacturing technology, production managment and industrial economics * Includes review questions and problems for the student reader
Download or read book Balancing and Sequencing of Assembly Lines written by Armin Scholl and published by Physica. This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book on hand describes decision problems which arise in flow -line production systems and proposes adequate solution methods. Flow -line production systems are present in different industrial environments and are utilized to manufacture a large variety of products. Usually, several models (versions) of a standardized product differing from each other by optional components and equipment have to be as sembled jointly on (mixed-model) assembly lines. Two main types of decision problems have to be solved when such production systems are installed and operat ed. The assembly line balancing problem consists of partitioning the assembly work (of each model) among different stations of a line. This medium-term problem is connected with the short-term problem of fmding an operating sequence of the models required to meet customer demands (mixed-model sequencing problem). These problem types are discussed and classified in Part I of this work. Different versions of balancing and sequencing problems are defmed and arranged within a hierarchical planning system. Since the optimization problems mentioned above are NP-hard, a lot of research work has been done so far in order to develop procedures which provide acceptable solutions within an appropriate amount of computation time on a computer system. Part II of the book surveys existing procedures and presents a number of very promising new solution methods for several versions of both basic problem types. Comprehensive numerical investigations showing the effectiveness of the new methods are reported.
Download or read book Sequencing Mixed Model Assembly Lines written by Jin Zhu and published by . This book was released on 1999 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Engineers Handbook Volume 3 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full coverage of manufacturing and management in mechanical engineering Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas that engineers may encounter in their work, providing access to the basics of each and pointing toward trusted resources for further reading, if needed. The book's accessible information offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations found in other handbooks. No single engineer can be a specialist in all areas that they are called upon to work in. It's a discipline that covers a broad range of topics that are used as the building blocks for specialized areas, including aerospace, chemical, materials, nuclear, electrical, and general engineering. This third volume of Mechanical Engineers' Handbook covers Manufacturing & Management, and provides accessible and in-depth access to the topics encountered regularly in the discipline: environmentally benign manufacturing, production planning, production processes and equipment, manufacturing systems evaluation, coatings and surface engineering, physical vapor deposition, mechanical fasteners, seal technology, statistical quality control, nondestructive inspection, intelligent control of material handling systems, and much more. Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering Focuses on the explanation and analysis of the concepts presented as opposed to a straight listing of formulas and data found in other handbooks Offers the option of being purchased as a four-book set or as single books Comes in a subscription format through the Wiley Online Library and in electronic and other custom formats Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 3 an "off-the-shelf" reference they'll turn to again and again.
Download or read book Proceedings of the 21st International Conference on Industrial Engineering and Engineering Management 2014 written by Ershi Qi and published by Springer. This book was released on 2015-01-06 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Being the premier forum for the presentation of new advances and research results in the fields of Industrial Engineering, IEEM 2014 aims to provide a high-level international forum for experts, scholars and entrepreneurs at home and abroad to present the recent advances, new techniques and applications face and face, to promote discussion and interaction among academics, researchers and professionals to promote the developments and applications of the related theories and technologies in universities and enterprises and to establish business or research relations to find global partners for future collaboration in the field of Industrial Engineering. All the goals of the international conference are to fulfill the mission of the series conference which is to review, exchange, summarize and promote the latest achievements in the field of industrial engineering and engineering management over the past year and to propose prospects and vision for the further development.
Download or read book Assembly Line Balancing under Uncertain Task Time and Demand Volatility written by Yuchen Li and published by Springer Nature. This book was released on 2022-09-10 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces several mathematical models in assembly line balancing based on stochastic programming and develops exact and heuristic methods to solve them. An assembly line system is a manufacturing process in which parts are added in sequence from workstation to workstation until the final assembly is produced. In an assembly line balancing problem, tasks belonging to different product models are allocated to workstations according to their processing times and precedence relationships among tasks. It incorporates two features, uncertain task times, and demand volatility, separately and simultaneously, into the conventional assembly line balancing model. A real-life case study related to the mask production during the COVID-19 pandemic is presented to illustrate the application of the proposed framework and methodology. The book is intended for graduate students who are interested in combinatorial optimizations in manufacturing with uncertain input.
Download or read book Balancing Objectives for Mixed model Paced Assembly Lines written by Sittichai Matanachai and published by . This book was released on 1996 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Applications of Modern Metaheuristics written by Taymaz Akan and published by Springer Nature. This book was released on 2022-12-04 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of various methodologies that make it possible for metaheuristics and hyper-heuristics to solve problems that occur in the real world. This book contains chapters that make use of metaheuristics techniques. The application fields range from image processing to transmission power control, and case studies and literature reviews are included to assist the reader. Furthermore, some chapters present cutting-edge methods for load frequency control and IoT implementations. In this sense, the book offers both theoretical and practical contents in the form of metaheuristic algorithms. The researchers used several stochastic optimization methods in this book, including evolutionary algorithms and Swarm-based algorithms. The chapters were written from a scientific standpoint. As a result, the book is primarily aimed at undergraduate and postgraduate students of Science, Engineering, and Computational Mathematics, but it can also be used in courses on Artificial Intelligence, among other things. Similarly, the material may be beneficial to research in evolutionary computation and artificial intelligence communities.
Download or read book Advances in Production Management Systems Innovative Production Management Towards Sustainable Growth written by Shigeki Umeda and published by Springer. This book was released on 2015-08-17 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes IFIP AICT 459 and 460 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2015, held in Tokyo, Japan, in September 2015. The 163 revised full papers were carefully reviewed and selected from 185 submissions. They are organized in the following topical sections: collaborative networks; globalization and production management; knowledge based production management; project management, engineering management, and quality management; sustainability and production management; co-creating sustainable business processes and ecosystems; open cloud computing architecture for smart manufacturing and cyber physical production systems; the practitioner's view on "innovative production management towards sustainable growth"; the role of additive manufacturing in value chain reconfiguration and sustainability; operations management in engineer-to-order manufacturing; lean production; sustainable system design for green products; cloud-based manufacturing; ontology-aided production - towards open and knowledge-driven planning and control; product-service lifecycle management: knowledge-driven innovation and social implications; and service engineering.
Download or read book Proceedings of the Fifteenth International Conference on Management Science and Engineering Management written by Jiuping Xu and published by Springer Nature. This book was released on 2021-07-15 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the fifteenth International Conference on Management Science and Engineering Management (ICMSEM 2021) held on August 1-4, 2021, at the University of Castilla-La Mancha (UCLM), Toledo, Spain. The proceedings contains theoretical and practical research of decision support systems, complex systems, empirical studies, sustainable development, project management, and operation optimization, showing advanced management concepts and demonstrates substantial interdisciplinary developments in MSEM methods and practical applications. It allows researchers and practitioners in management science and engineering management (MSEM) to share their latest insights and contribution. Meanwhile, it appeals to readers interested in these areas, especially those looking for new ideas and research directions.
Download or read book Environment Conscious Manufacturing written by Surendra M. Gupta and published by CRC Press. This book was released on 2007-12-19 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hotter temperatures, less arctic ice, loss of habitat-every other day, it seems, global warming and environmental issues make headlines. Consumer-driven environmental awareness combined with stricter recycling regulations have put the pressure on companies to produce and dispose of products in an environmentally responsible manner. Redefining indus
Download or read book International Asia Conference on Industrial Engineering and Management Innovation IEMI2012 Proceedings written by Ershi Qi and published by Springer Science & Business Media. This book was released on 2013-05-29 with total page 1666 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Industrial Engineering and Engineering Management is sponsored by the Chinese Industrial Engineering Institution, CMES, which is the only national-level academic society for Industrial Engineering. The conference is held annually as the major event in this arena. Being the largest and the most authoritative international academic conference held in China, it provides an academic platform for experts and entrepreneurs in the areas of international industrial engineering and management to exchange their research findings. Many experts in various fields from China and around the world gather together at the conference to review, exchange, summarize and promote their achievements in the fields of industrial engineering and engineering management. For example, some experts pay special attention to the current state of the application of related techniques in China as well as their future prospects, such as green product design, quality control and management, supply chain and logistics management to address the need for, amongst other things low-carbon, energy-saving and emission-reduction. They also offer opinions on the outlook for the development of related techniques. The proceedings offers impressive methods and concrete applications for experts from colleges and universities, research institutions and enterprises who are engaged in theoretical research into industrial engineering and engineering management and its applications. As all the papers are of great value from both an academic and a practical point of view, they also provide research data for international scholars who are investigating Chinese style enterprises and engineering management.
Download or read book Pervasive Computing and the Networked World written by Qiaohong Zu and published by Springer. This book was released on 2014-07-01 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the Joint International Conference on Pervasive Computing and Web Society, ICPCA/SWS 2013, held in Vina de Mar, Chile, in December 2013. The 56 revised full papers presented together with 29 poster papers were carefully reviewed and selected from 156 submissions. The papers are organized in topical sections on infrastructure and devices; service and solution; data and knowledge; as well as community.
