Download or read book AVS 66th International Symposium Exhibition 2019 written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defects in Two Dimensional Materials written by Rafik Addou and published by Elsevier. This book was released on 2022-02-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defects in Two-Dimensional Materials addresses the fundamental physics and chemistry of defects in 2D materials and their effects on physical, electrical and optical properties. The book explores 2D materials such as graphene, hexagonal boron nitride (h-BN) and transition metal dichalcogenides (TMD). This knowledge will enable scientists and engineers to tune 2D materials properties to meet specific application requirements. The book reviews the techniques to characterize 2D material defects and compares the defects present in the various 2D materials (e.g. graphene, h-BN, TMDs, phosphorene, silicene, etc.). As two-dimensional materials research and development is a fast-growing field that could lead to many industrial applications, the primary objective of this book is to review, discuss and present opportunities in controlling defects in these materials to improve device performance in general or use the defects in a controlled way for novel applications. Presents the theory, physics and chemistry of 2D materials Catalogues defects of 2D materials and their impacts on materials properties and performance Reviews methods to characterize, control and engineer defects in 2D materials
Download or read book Nanometer Scale Science and Technology written by Maria Allegrini and published by . This book was released on 2001 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gallium Oxide written by Masataka Higashiwaki and published by Springer Nature. This book was released on 2020-04-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of the new wide-bandgap semiconductor gallium oxide (Ga2O3). Ga2O3 has been attracting much attention due to its excellent materials properties. It features an extremely large bandgap of greater than 4.5 eV and availability of large-size, high-quality native substrates produced from melt-grown bulk single crystals. Ga2O3 is thus a rising star among ultra-wide-bandgap semiconductors and represents a key emerging research field for the worldwide semiconductor community. Expert chapters cover physical properties, synthesis, and state-of-the-art applications, including materials properties, growth techniques of melt-grown bulk single crystals and epitaxial thin films, and many types of devices. The book is an essential resource for academic and industry readers who have an interest in, or plan to start, a new R&D project related to Ga2O3.
Download or read book Helium Ion Microscopy written by Gregor Hlawacek and published by Springer. This book was released on 2016-10-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of Helium Ion Microscopy (HIM) including the Gas Field Ion Source (GFIS), column and contrast formation. It also provides first hand information on nanofabrication and high resolution imaging. Relevant theoretical models and the existing simulation approaches are discussed in an extra section. The structure of the book allows the novice to get acquainted with the specifics of the technique needed to understand the more applied chapters in the second half of the volume. The expert reader will find a complete reference of the technique covering all important applications in several chapters written by the leading experts in the field. This includes imaging of biological samples, resist and precursor based nanofabrication, applications in semiconductor industry, using Helium as well as Neon and many more. The fundamental part allows the regular HIM user to deepen his understanding of the method. A final chapter by Bill Ward, one of the pioneers of HIM, covering the historical developments leading to the existing tool complements the content.
Download or read book Introduction to Nano written by Amretashis Sengupta and published by Springer. This book was released on 2015-07-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the basics of nanotechnology and provides a solid understanding of the subject. Starting from a brush-up of the basic quantum mechanics and materials science, the book helps to gradually build up understanding of the various effects of quantum confinement, optical-electronic properties of nanoparticles and major nanomaterials. The book covers the various physical, chemical and hybrid methods of nanomaterial synthesis and nanofabrication as well as advanced characterization techniques. It includes chapters on the various applications of nanoscience and nanotechnology. It is written in a simple form, making it useful for students of physical and material sciences.
Download or read book The Rock Physics Handbook written by Gary Mavko and published by Cambridge University Press. This book was released on 2009-04-30 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: A significantly expanded new edition of this practical guide to rock physics and geophysical interpretation for reservoir geophysicists and engineers.
Download or read book Old Dirck s Book written by Raymond William Storm and published by . This book was released on 1949 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ancestry is traced to Dederick Storm who was born ca. 1390 and lived at Wyck, Holland. His descendant, Dirck Storm, son of Dirck Storm and Alida van Cortenbosch, was born in Leyden, South Holland in 1630 and married Maria van Montfoort of Delft in 1655. They came to New York in 1662. He died at Tarrytown in 1716. Descendants lived in New York, New Jersey, and elsewhere.
Download or read book Quantitative Seismic Interpretation written by Per Avseth and published by Cambridge University Press. This book was released on 2010-06-10 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantitative Seismic Interpretation demonstrates how rock physics can be applied to predict reservoir parameters, such as lithologies and pore fluids, from seismically derived attributes. The authors provide an integrated methodology and practical tools for quantitative interpretation, uncertainty assessment, and characterization of subsurface reservoirs using well-log and seismic data. They illustrate the advantages of these new methodologies, while providing advice about limitations of the methods and traditional pitfalls. This book is aimed at graduate students, academics and industry professionals working in the areas of petroleum geoscience and exploration seismology. It will also interest environmental geophysicists seeking a quantitative subsurface characterization from shallow seismic data. The book includes problem sets and a case-study, for which seismic and well-log data, and MATLAB® codes are provided on a website (http://www.cambridge.org/9780521151351). These resources will allow readers to gain a hands-on understanding of the methodologies.
Download or read book 3D Microelectronic Packaging written by Yan Li and published by Springer. This book was released on 2016-10-29 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a comprehensive reference for graduate students and professionals in both academia and industry on the fundamentals, processing details, and applications of 3D microelectronic packaging, an industry trend for future microelectronic packages. Chapters written by experts cover the most recent research results and industry progress in the following areas: TSV, die processing, micro bumps, direct bonding, thermal compression bonding, advanced materials, heat dissipation, thermal management, thermal mechanical modeling, quality, reliability, fault isolation, and failure analysis of 3D microelectronic packages. Numerous images, tables, and didactic schematics are included throughout. This essential volume equips readers with an in-depth understanding of all aspects of 3D packaging, including packaging architecture, processing, thermal mechanical and moisture related reliability concerns, common failures, developing areas, and future challenges, providing insights into key areas for future research and development.
Download or read book Quartz Cementation in Sandstones written by R. Worden and published by John Wiley & Sons. This book was released on 2009-09-18 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quartz is the major porosity-reducing cement in many sandstonesequences. Therefore, Quartz cements represent a key source ofpetrographic and geochemical information about diagenetic history.They are also the major determinant of sandstone reservoirquality. While the ultimate goal of research in this area is to makerobust predictions about the amount and distribution of quartzcements in a wide variety of depositional and burial settings,there are nevertheless large areas of the subject that are poorlyunderstood and remain the subject of controversy. The aim of this Volume, which is based partly on paperssubmitted to a 1996 workshop in Belfast, and partly on invitedcontributions, is to bring together some of the main strands ofresearch into quartz cements and provide a focus for debate anddirection for future research. This book will be welcomed by sedimentologists, petrographersand geochemists involved in sandstone digenesis, as well as bypetroleum geologists seeking a deeper understanding of the factorsinfluencing reservoir porosity and permeability. Contributors from 11 countries and 4 continents. Represents the benchmark in quartz cement research. If you are a member of the International Association ofSedimentologists, for purchasing details, please see:http://www.iasnet.org/publications/details.asp?code=SP29
Download or read book Ferroelectric Domain Walls written by Jill Guyonnet and published by Springer Science & Business Media. This book was released on 2014-04-08 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the nano metric resolution of atomic force microscopy techniques, this work explores the rich fundamental physics and novel functionalities of domain walls in ferroelectric materials, the nano scale interfaces separating regions of differently oriented spontaneous polarization. Due to the local symmetry-breaking caused by the change in polarization, domain walls are found to possess an unexpected lateral piezoelectric response, even when this is symmetry-forbidden in the parent material. This has interesting potential applications in electromechanical devices based on ferroelectric domain patterning. Moreover, electrical conduction is shown to arise at domain walls in otherwise insulating lead zirconate titanate, the first such observation outside of multiferroic bismuth ferrite, due to the tendency of the walls to localize defects. The role of defects is then explored in the theoretical framework of disordered elastic interfaces possessing a characteristic roughness scaling and complex dynamic response. It is shown that the heterogeneous disorder landscape in ferroelectric thin films leads to a breakdown of the usual self-affine roughness, possibly related to strong pinning at individual defects. Finally, the roles of varying environmental conditions and defect densities in domain switching are explored and shown to be adequately modelled as a competition between screening effects and pinning.
Download or read book Aortopathy written by Koichiro Niwa and published by Springer. This book was released on 2017-02-09 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first textbook to focus on Aortopathy, a new clinical concept for a form of vasculopathy. The first section of the book starts from discussing general concept and history of Aortopathy, and then deals with its pathophysiology, manifestation, intrinsic factor, clinical implication, management and prevention. The second part closely looks at various disorders of the Aortopathy such as bicuspid aortic valve and coarctation of aorta. The book editors have published a lot of works on the topic and have been collecting relating data in the field of congenital heart disease for the past 20 years, thus present the book with confidence. The topic - an association of aortic pathophysiological abnormality, aortic dilation and aorto-left ventricular interaction - is getting more and more attention among cardiovascular physicians. This is the first book to refer for cardiologists, pediatric cardiologists, surgeons, ACHD specialists, etc. to acquire thorough knowledge on Aortopathy.
Download or read book Automata on Infinite Words written by M. Nivat and published by Springer Science & Business Media. This book was released on 1985-06 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials and Sustainable Development written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2015-01-19 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, from noted materials selection authority Mike Ashby, provides a structure and framework for analyzing sustainable development and the role of materials in it. The aim is to introduce ways of exploring sustainable development to readers in a way that avoids simplistic interpretations and approaches complexity in a systematic way. There is no completely "right" answer to questions of sustainable development – instead, there is a thoughtful, well-researched response that recognizes concerns of stakeholders, the conflicting priorities and the economic, legal and social aspects of a technology as well as its environmental legacy. The intent is not to offer solutions to sustainability challenges but rather to improve the quality of discussion and enable informed, balanced debate. - Winner of a 2016 Most Promising New Textbook Award from the Textbook and Academic Authors Association - Describes sustainable development in increasingly detailed progression, from a broad overview to specific tools and methods - Six chapter length case studies on such topics as biopolymers, electric cars, bamboo, and lighting vividly illustrate the sustainable development process from a materials perspective - Business and economic aspects are covered in chapters on corporate sustainability and the "circular materials economy" - Support for course use includes online solutions manual and image bank
Download or read book Frontiers in Electronic Materials written by Jörg Heber and published by John Wiley & Sons. This book was released on 2013-04-02 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of extended abstracts summarizes the latest research as presented at "Frontiers in Electronic Materials", a Nature conference on correlation effects and memristive phenomena, which took place in 2012. The contributions from leading authors from the US, Japan, Korea, and Europe discuss breakthroughs and challenges in fundamental research as well as the potential for future applications. Hot topics covered include: Electron correlation and unusual quantum effects Oxide heterostructures and interfaces Multiferrroics, spintronics, ferroelectrics and flexoelectrics Processing in nanotechnology Advanced characterization techniques Superionic conductors, thermoelectrics, photovoltaics Chip architectures and computational concepts An essential resource for the researchers of today and tomorrow.
Download or read book Annual Operating Report written by Detroit (Mich.). Board of Water Commissioners and published by . This book was released on 1891 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
