Download or read book Aviation Maintenance Technician Oral and Practical Exam Guide written by Dale Crane and published by Aviation Supplies & Academics. This book was released on 2016-05-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The oral and practical exams are the last steps for certification of an Aviation Maintenance Technician (AMT). The AMT Oral & Practical Exam Guide by industry expert Dale Crane (edited by Raymond E. Thompson) will prepare the reader for the General, Airframe, and Powerplant exams. This book includes information on the certification process, typical projects and required skill levels, and practical knowledge requirements in a question-and-answer format, with references defined for further study. When taking an FAA Knowledge Exam, you merely verify your knowledge of facts--you interface with a computer and there is no personal involvement. The AMT oral and practical tests are different: you work one-on-one with an experienced mechanic evaluator who is able to not only judge your mechanical skills, but observe how you think and see the way you solve problems. The examiner determines whether or not you possess the knowledge and skill level needed as an entry-level technician, as defined by the FAA Practical Test Standards (PTS). The AMT Oral & Practical Exam Guide will help you prepare for this significant step towards your new career as an AMT.
Download or read book Aviation Maintenance Technician Oral and Practical Exam Guide written by Dale Crane and published by Aviation Supplies & Academics. This book was released on 1994 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aviation Maintenance Technician General written by Dale Crane and published by Aviation Supplies & Academics. This book was released on 2018-02-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: eBundle: printed book and ebook download code The Aviation Maintenance Technician: General is the first book of Dale Crane's AMT Series, textbooks that were created to set the pace for maintenance technician training and attain a level of quality that surpasses all other maintenance textbooks on the market. The General text covers the first section of the FAA's required curriculum, incorporating an introduction to aviation along with basic lessons on mathematics, physics, and electricity. As the student progresses, specific aviation concerns are addressed, including regulations, mechanic privileges, forms, aircraft hardware and tools. Dale Crane's textbooks consist of the most complete and up-to-date material for A&P training. The curriculum meets 14 CFR Part 147 requirements and Subject Matter Knowledge Codes from the FAA mechanics knowledge tests. They are designed for at-home, classroom, or university-level training. These comprehensive textbooks include full-color charts, tables and illustrations throughout, in addition to an extensive glossary, index, and additional career information. A study guide is included within each textbook in the form of study question sections, with answer keys printed at the end of each chapter. These can be used for evaluation by an instructor or for self-testing. ASA's mechanic textbooks are all-inclusive -- no separate, inconvenient workbook is needed by the student or instructor.
Download or read book A and P Technician Airframe Textbook written by Jeppesen Sanderson, Inc and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Jeppesen's A&P Technician Airframe Textbook is an essential tool for successful aircraft maintenance training. Not only does it provide the fundamentals for the student studying to become a certified maintenance technician, but it also serves as an excellent resource for the experienced maintenance professional. This thoroughly revised, expanded, and updated edition fully integrates practical A&P airframe skills with the theory of the A&P general topic areas. It includes a wealth of illustrations and examples to help you get the most from your study efforts. Each section also includes comprehensive exercises that check your understanding of the material. The textbook familiarizes you with the fundamental concepts, terms, and procedures that you will use when inspecting and maintaining airframe structures and systems..."--From publisher description.
Download or read book A P Technician General Textbook written by Jeppesen and published by . This book was released on 2004-01-01 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most current aviation maintenance technician general textbook available. Written to the new FAR part 147 standards. Expanded to include a complete section on electrical generators and motors, new hardware, and nonmetallic components. Many new tables, charts, and illustrations, including: abrasives, corrosion removal and treatment, corrosion points, helicopter weight and balance, and others. The 2004 revision includes additional metric hardware nomenclature and electronic tools, including internet research applications.
Download or read book A and P Technician General Test Guide with Oral and Practical Study Guide written by Jeppesen Sanderson, inc and published by . This book was released on 2003-08-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively revised and updated, Jeppesens A&P Technician Test Guides are an invaluable resource for anyone preparing for the FAA Aviation General, Airframe, or Powerplant Mechanic Airmen Knowledge tests. Also included is the Oral and Practical Study Guide, which serves as an excellent source when preparing for your FAA oral and practical exam.
Download or read book Powerplant Test Guide 2021 written by ASA Test Prep Board and published by Aviation Supplies & Academics. This book was released on 2020-11-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Pass your test and know what is essential to become a safe, competent AMT from the most trusted source in aviation training"--Cover.
Download or read book Airframe and Powerplant Mechanics Airframe Handbook written by United States. Flight Standards Service and published by . This book was released on 1976 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aviation Maintenance Technician Series written by Dale Crane and published by . This book was released on 2008-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailing the technical maintenance of turbine and reciprocating engines, this book covers the final section of the FAA’s required curriculum. Theory and construction of these engines are discussed, along with propellers, development of aircraft powerplants, and powerplant auxiliary systems. Includes more than 700 full color illustrations.
Download or read book Aviation Mechanic Handbook written by Dale Crane and published by Aviation Supplies & Academics. This book was released on 2012-02-10 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Handy toolbox-size reference for mechanics, aircraft owners, and pilots. All the information critical to maintaining an aircraft. Your single source for: mathematics, conversions, formulas; aircraft nomenclature, controls, system specs; material and tool identifications; hardware sizes and equivalents; inspections, corrosion detection and control; frequently used scales, charts, diagrams, and much more."--P. [4] of cover.
Download or read book A P Technician General written by Jeppesen Sanderson, inc and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Aviation Mechanic General Test Guide is designed to help you prepare for the FAA Aviation Mechanic General Knowledge computerized test. It covers FAA exam material that applies to general knowledge related to aircraft maintenance."--Introduction.
Download or read book Aviation Mechanic for General Airframe and Powerplant written by Federal Aviation Administration (FAA)/Aviation Supplies & Academics (ASA) and published by Aviation Supplies & Academics. This book was released on 2008-11-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: ASA reprints the most current FAA Practical Test Standards (PTS) in this series of handy cockpit-sized guides. Every PTS is written by the FAA and details the type and level of skill and knowledge that must be demonstrated before an examiner can issue a certificate or rating to an applicant, describing also the background study and reference materials. This new PTS guide for mechanics includes all three current standards in one book for the General (8081-26--through Change 3), Airframe (8081-27--through Change 3), and Powerplant (8081-28--through Change 2) sections of the Oral & Practical exams, the last step in the quest for the Aviation Maintenance Technician (AMT) certificate. The standards presented in these guides are the only way for AMT students, their instructors, as well as the examiners themselves, to know what the FAA expects for these required tests. Therefore they are essential for preparation, study, and eventually passing the tests to become FAA-certified aviation mechanics.
Download or read book A P Technician Power Plant Textbook written by Jeppesen and published by . This book was released on 2014-09-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aviation Mechanic Handbook written by Dale Crane and published by Aviation Supplies & Academics. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A core reference manual for mechanics, aircraft owners, and pilots, this book compiles specs from stacks of reference books and government publications into a handy, toolbox-size guide. Includes information critical to maintaining an aircraft. Your single source for: --applicable mathematics, conversions, and formulas --aircraft nomenclature, controls, and system specs --material/tool identifications --hardware sizes/equivalents --metal fabrication and fabric covering techniques --composite materials --aircraft batteries --inspections, corrosion detection/control --aircraft tire and spark plug information --the most frequently used measurements, scales, charts, diagrams... and much more. The Seventh Edition features revisions and updates relevant to the latest industry practices. Includes index, some color illustrations; pages are tabbed to facilitate quick lookups. Stay-flat flexible plastic spiral binding is easy on all surfaces, and allows for quick on-the-job reference.
Download or read book Aviation Maintenance Technician Handbook Airframe Volume 2 written by Federal Aviation Federal Aviation Administration (FAA)/Aviation Supplies & Academics (ASA) and published by FAA Handbooks. This book was released on 2018-11-20 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The FAA Aviation Maintenance Technician Handbooks are designed for use by instructors and applicants preparing for the FAA Knowledge Exam and Oral & Practical (O&P) Exams required for obtaining an Aviation Maintenance Technician (AMT) certificate with Airframe or Powerplant rating or both (also called an A&P license). Newly updated for 2018, this new edition reflects current technologies, equipment and procedures. These handbooks are for both students and instructors, and also serve as invaluable reference guides for current technicians who wish to improve their knowledge. This is Volume 2 of the FAA's "FAA-H-8083-31A" handbook. This FAA Handbook provides the basic information on principles, fundamentals, and technical procedures in the subject matter areas relating to the airframe and powerplant ratings, such as: Aircraft Structures, Aerodynamics, Aircraft Assembly and Rigging, Aircraft Fabric Covering, Aircraft Metal Structural Repair, Aircraft Welding, Aircraft Wood and Structural Repair, Advanced Composite Materials, Aircraft Painting and Finishing, and Aircraft Electrical System. Illustrated throughout with detailed, full-color drawings and photographs, with a comprehensive glossary and index.
Download or read book Aviation Mechanic Oral Practical Exam Guide written by Keith Anderson and published by Aviation Supplies & Academics. This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Oral and Practical Exams are the last steps for the certification of an aviation mechanic. You will work one-on-one with a designated mechanic evaluator (DME) who will determine if you possess the knowledge, risk management, and skill level needed to be issued an FAA Aviation Mechanic Certificate. The Aviation Mechanic Oral & Practical Exam Guide will help you prepare for this significant step towards your new career. The fifth edition of this book is designed to prepare aviation mechanic applicants to demonstrate their skill and understanding of the required elements outlined in the FAA airman certification standards (FAA-S-ACS-1). This complete resource includes information on the certification process and covers all the practical skills and required knowledge in a question-and-answer format, with references defined for further study.
Download or read book Airframe and Powerplant Mechanics General Handbook written by Faa and published by Nicholson. This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Aviation Maintenance Technician Handbook-General was developed as one of a series of three handbooks for persons preparing for mechanic certification with airframe or powerplant ratings, or both. It is intended that this handbook will provide basic information on principles, fundamentals, and technical procedures in the subject matter common to both the airframe and powerplant ratings. Emphasis in this volume is on theory and methods of application."--Preface of book.
