Download or read book Autonomous Quadrotor Control Using Convolutional Neural Networks written by Amer Mahdy Hamadi and published by . This book was released on 2019 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Quadrotors are considered nowadays one of the fastest growing technologies. It is entering all fields of life making them a powerful tool to serve humanity and help in developing a better life style. It is crucial to experiment all possible ways of controlling quadrotors, starting from classical methodologies to cutting edge modern technologies to serve their purpose. In most of the times quadrotors would have combination of several technologies on board. The attitude angles and altitude control used in this thesis are based mainly on PID control which is modeled and simulated on MATLAB and Simulink. To control the quadrotor behavior for two different tasks, Obstacle Avoidance and Command by Hand Gesture, the use of Convolutional Neural Networks (CNN) was proposed, since this new technology had shown very impressive results in image recognition in recent years. A considerable amount of training images (datasets) were created for the two tasks. Training and testing of the CNN were performed for these datasets, and real time flight experiments were performed, using a ground station, a Arduino microcontroller and interface circuit connected to the quadrotor. Results of the experiments show an excellent error rates for both tasks. The system performance reflects a major advantage of scalability for classification for new classes and other complex tasks, towards an autonomous flying and more intelligent behavior of quadrotors."--Abstract.
Download or read book Deep Learning for Unmanned Systems written by Anis Koubaa and published by Springer Nature. This book was released on 2021-10-01 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is used at the graduate or advanced undergraduate level and many others. Manned and unmanned ground, aerial and marine vehicles enable many promising and revolutionary civilian and military applications that will change our life in the near future. These applications include, but are not limited to, surveillance, search and rescue, environment monitoring, infrastructure monitoring, self-driving cars, contactless last-mile delivery vehicles, autonomous ships, precision agriculture and transmission line inspection to name just a few. These vehicles will benefit from advances of deep learning as a subfield of machine learning able to endow these vehicles with different capability such as perception, situation awareness, planning and intelligent control. Deep learning models also have the ability to generate actionable insights into the complex structures of large data sets. In recent years, deep learning research has received an increasing amount of attention from researchers in academia, government laboratories and industry. These research activities have borne some fruit in tackling some of the challenging problems of manned and unmanned ground, aerial and marine vehicles that are still open. Moreover, deep learning methods have been recently actively developed in other areas of machine learning, including reinforcement training and transfer/meta-learning, whereas standard, deep learning methods such as recent neural network (RNN) and coevolutionary neural networks (CNN). The book is primarily meant for researchers from academia and industry, who are working on in the research areas such as engineering, control engineering, robotics, mechatronics, biomedical engineering, mechanical engineering and computer science. The book chapters deal with the recent research problems in the areas of reinforcement learning-based control of UAVs and deep learning for unmanned aerial systems (UAS) The book chapters present various techniques of deep learning for robotic applications. The book chapters contain a good literature survey with a long list of references. The book chapters are well written with a good exposition of the research problem, methodology, block diagrams and mathematical techniques. The book chapters are lucidly illustrated with numerical examples and simulations. The book chapters discuss details of applications and future research areas.
Download or read book Proceedings of 2022 International Conference on Autonomous Unmanned Systems ICAUS 2022 written by Wenxing Fu and published by Springer Nature. This book was released on 2023-03-10 with total page 3985 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the ICAUS 2022, which offers a unique and interesting platform for scientists, engineers and practitioners throughout the world to present and share their most recent research and innovative ideas. The aim of the ICAUS 2022 is to stimulate researchers active in the areas pertinent to intelligent unmanned systems. The topics covered include but are not limited to Unmanned Aerial/Ground/Surface/Underwater Systems, Robotic, Autonomous Control/Navigation and Positioning/ Architecture, Energy and Task Planning and Effectiveness Evaluation Technologies, Artificial Intelligence Algorithm/Bionic Technology and Its Application in Unmanned Systems. The papers showcased here share the latest findings on Unmanned Systems, Robotics, Automation, Intelligent Systems, Control Systems, Integrated Networks, Modeling and Simulation. It makes the book a valuable asset for researchers, engineers, and university students alike.
Download or read book Autonomous Control of Unmanned Aerial Vehicles written by Victor Becerra and published by MDPI. This book was released on 2019-06-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned aerial vehicles (UAVs) are being increasingly used in different applications in both military and civilian domains. These applications include surveillance, reconnaissance, remote sensing, target acquisition, border patrol, infrastructure monitoring, aerial imaging, industrial inspection, and emergency medical aid. Vehicles that can be considered autonomous must be able to make decisions and react to events without direct intervention by humans. Although some UAVs are able to perform increasingly complex autonomous manoeuvres, most UAVs are not fully autonomous; instead, they are mostly operated remotely by humans. To make UAVs fully autonomous, many technological and algorithmic developments are still required. For instance, UAVs will need to improve their sensing of obstacles and subsequent avoidance. This becomes particularly important as autonomous UAVs start to operate in civilian airspaces that are occupied by other aircraft. The aim of this volume is to bring together the work of leading researchers and practitioners in the field of unmanned aerial vehicles with a common interest in their autonomy. The contributions that are part of this volume present key challenges associated with the autonomous control of unmanned aerial vehicles, and propose solution methodologies to address such challenges, analyse the proposed methodologies, and evaluate their performance.
Download or read book Neural Network Control of Vehicles written by Igor Astrov and published by Nova Science Publishers. This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few years, considerable interest has been shown and relevant resources have been devoted to the design, development and operation of autonomous aerial, underwater, and sea surface vehicles. The possibility of removing human pilots from danger and the size and cost advantages of autonomous vehicles are indeed attractive, but often have to be compared with the performance that can be attained by human-piloted vehicles, in terms of mission capabilities, efficiency and flexibility. The operation of an autonomous vehicle in an unknown, dynamic and potentially hostile environment is a very complex problem, especially when the autonomous vehicle is required to use its full manoeuvring capabilities and to react in real time to changes in the operational environment. A common way of dealing with highly complex systems is via a hierarchical decomposition of the activities to be performed by the autonomous vehicles. However, only limited results can be obtained with this method. Another method is to design a hybrid control system that offers safety and performance guarantees by use of neural control technique. Neural networks appear to offer a new, promising direction toward better understanding of the most difficult control problems that have previously been very difficult or impossible to solve. This book provides basic approaches for the modelling and simulation of neural control systems using the MATLAB/Simulink environment for various types of vehicles, emphasising realistic dynamics with numerous examples. These types of vehicles include experimental aircraft, self-guided missiles, unmanned miniature helicopters, autonomous underwater vehicles, and more.
Download or read book Proceedings of the 4th International Conference on Electrical Engineering and Control Applications written by Sofiane Bououden and published by Springer Nature. This book was released on 2020-09-29 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented during the 4th International Conference on Electrical Engineering and Control Applications. It covers new control system models, troubleshooting tips and complex system requirements, such as increased speed, precision and remote capabilities. Additionally, the papers discuss not only the engineering aspects of signal processing and various practical issues in the broad field of information transmission, but also novel technologies for communication networks and modern antenna design. This book is intended for researchers, engineers and advanced postgraduate students in the fields of control and electrical engineering, computer science and signal processing, as well as mechanical and chemical engineering.
Download or read book 15th European Workshop on Advanced Control and Diagnosis ACD 2019 written by Elena Zattoni and published by Springer Nature. This book was released on 2022-06-13 with total page 1441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, published in two volumes, embodies the proceedings of the 15th European Workshop on Advanced Control and Diagnosis (ACD 2019) held in Bologna, Italy, in November 2019. It features contributed and invited papers from academics and professionals specializing in an important aspect of control and automation. The book discusses current theoretical research developments and open problems and illustrates practical applications and industrial priorities. With a focus on both theory and applications, it spans a wide variety of up-to-date topics in the field of systems and control, including robust control, adaptive control, fault-tolerant control, control reconfiguration, and model-based diagnosis of linear, nonlinear and hybrid systems. As the subject coverage has expanded to include cyber-physical production systems, industrial internet of things and sustainability issues, some contributions are of an interdisciplinary nature, involving ICT disciplines and environmental sciences. This book is a valuable reference for both academics and professionals in the area of systems and control, with a focus on advanced control, automation, fault diagnosis and condition monitoring.
Download or read book Proceedings of 3rd 2023 International Conference on Autonomous Unmanned Systems 3rd ICAUS 2023 written by Yi Qu and published by Springer Nature. This book was released on with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Algorithms for a Neural Network Implementation of Autonomous Visual Flight Control Using Optical Trajectories written by Zia-ur Rahman and published by . This book was released on 1989 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Control Simulation for Autonomous Quadrotor written by Idris Eko Putro and published by LAP Lambert Academic Publishing. This book was released on 2011-03 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of Quadrotor UAVs has been widely well known. It has capability to hover, vertical take-off and landing (VTOL) with having less complexity in vehicle dynamics compared with small helicopter. It is basically an unstable system and exhibits nonlinear behavior. This book describes the development of nonlinear model of quadrotor dynamics derived from Newton-Euler formulation and presented under Matlab/Simulink environment. The Model is equipped by Stability Augmentation System (SAS) to maintain the quadrotor level flight (attitude stability). The autonomous mission for this vehicle is fixed for trajectory following. LQR Optimal control was chosen to accomplish this mission.
Download or read book Advanced Information Networking and Applications written by Leonard Barolli and published by Springer Nature. This book was released on 2022-03-30 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the theory, design and applications of computer networks, distributed computing and information systems. Networks of today are going through a rapid evolution, and there are many emerging areas of information networking and their applications. Heterogeneous networking supported by recent technological advances in low-power wireless communications along with silicon integration of various functionalities such as sensing, communications, intelligence and actuations is emerging as a critically important disruptive computer class based on a new platform, networking structure and interface that enable novel, low-cost and high-volume applications. Several of such applications have been difficult to realize because of many interconnections problems. To fulfill their large range of applications, different kinds of networks need to collaborate, and wired and next generation wireless systems should be integrated in order to develop high-performance computing solutions to problems arising from the complexities of these networks. The aim of the book “Advanced Information Networking and Applications” is to provide the latest research findings, innovative research results, methods and development techniques from both theoretical and practical perspectives related to the emerging areas of information networking and applications.
Download or read book Advances on P2P Parallel Grid Cloud and Internet Computing written by Leonard Barolli and published by Springer Nature. This book was released on 2021-10-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provide latest research findings, innovative research results, methods and development techniques from both theoretical and practical perspectives related to P2P, grid, cloud and Internet computing as well as to reveal synergies among such large-scale computing paradigms. P2P, grid, cloud and Internet computing technologies have been very fast established as breakthrough paradigms for solving complex problems by enabling aggregation and sharing of an increasing variety of distributed computational resources at large scale. Grid computing originated as a paradigm for high performance computing, as an alternative to expensive supercomputers through different forms of large-scale distributed computing. P2P computing emerged as a new paradigm after client-server and web-based computing and has shown useful to the development of social networking, Business to Business (B2B), Business to Consumer (B2C), Business to Government (B2G), Business to Employee (B2E) and so on. Cloud computing has been defined as a “computing paradigm where the boundaries of computing are determined by economic rationale rather than technical limits.” Cloud computing has fast become the computing paradigm with applicability and adoption in all application domains and providing utility computing at large scale. Finally, Internet computing is the basis of any large-scale distributed computing paradigms; it has very fast developed into a vast area of flourishing field with enormous impact on today’s information societies serving thus as a universal platform comprising a large variety of computing forms such as grid, P2P, cloud and mobile computing.
Download or read book Pattern Recognition written by Karina Mariela Figueroa Mora and published by Springer Nature. This book was released on 2020-06-17 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 12th Mexican Conference on Pattern Recognition, MCPR 2020, which was due to be held in Morelia, Mexico, in June 2020. The conference was held virtually due to the COVID-19 pandemic. The 31 papers presented in this volume were carefully reviewed and selected from 67 submissions. They were organized in the following topical sections: pattern recognition techniques; image processing and analysis; computer vision; industrial and medical applications of pattern recognition; natural language processing and recognition; artificial intelligence techniques and recognition.
Download or read book Intelligent Autonomous Drones with Cognitive Deep Learning written by David Allen Blubaugh and published by Apress. This book was released on 2022-11-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is an artificial intelligence (AI)-enabled drone and what can it do? Are AI-enabled drones better than human-controlled drones? This book will answer these questions and more, and empower you to develop your own AI-enabled drone. You'll progress from a list of specifications and requirements, in small and iterative steps, which will then lead to the development of Unified Modeling Language (UML) diagrams based in part to the standards established by for the Robotic Operating System (ROS). The ROS architecture has been used to develop land-based drones. This will serve as a reference model for the software architecture of unmanned systems. Using this approach you'll be able to develop a fully autonomous drone that incorporates object-oriented design and cognitive deep learning systems that adapts to multiple simulation environments. These multiple simulation environments will also allow you to further build public trust in the safety of artificial intelligence within drones and small UAS. Ultimately, you'll be able to build a complex system using the standards developed, and create other intelligent systems of similar complexity and capability. Intelligent Autonomous Drones with Cognitive Deep Learning uniquely addresses both deep learning and cognitive deep learning for developing near autonomous drones. What You’ll Learn Examine the necessary specifications and requirements for AI enabled drones for near-real time and near fully autonomous drones Look at software and hardware requirements Understand unified modeling language (UML) and real-time UML for design Study deep learning neural networks for pattern recognition Review geo-spatial Information for the development of detailed mission planning within these hostile environments Who This Book Is For Primarily for engineers, computer science graduate students, or even a skilled hobbyist. The target readers have the willingness to learn and extend the topic of intelligent autonomous drones. They should have a willingness to explore exciting engineering projects that are limited only by their imagination. As far as the technical requirements are concerned, they must have an intermediate understanding of object-oriented programming and design.
Download or read book Guided Autonomy for Quadcopter Photography written by Saif Alabachi and published by . This book was released on 2019 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photographing small objects with a quadcopter is non-trivial to perform with many common user interfaces, especially when it requires maneuvering an Unmanned Aerial Vehicle (UAV) to difficult angles in order to shoot high perspectives. The aim of this research is to employ machine learning to support better user interfaces for quadcopter photography. Human Robot Interaction (HRI) is supported by visual servoing, a specialized vision system for real-time object detection, and control policies acquired through reinforcement learning (RL). Two investigations of guided autonomy were conducted. In the first, the user directed the quadcopter with a sketch based interface, and periods of user direction were interspersed with periods of autonomous flight. In the second, the user directs the quadcopter by taking a single photo with a handheld mobile device, and the quadcopter autonomously flies to the requested vantage point. This dissertation focuses on the following problems: 1) evaluating different user interface paradigms for dynamic photography in a GPS-denied environment; 2) learning better Convolutional Neural Network (CNN) object detection models to assure a higher precision in detecting human subjects than the currently available state-of-the-art fast models; 3) transferring learning from the Gazebo simulation into the real world; 4) learning robust control policies using deep reinforcement learning to maneuver the quadcopter to multiple shooting positions with minimal human interaction.
Download or read book Advanced Robust Nonlinear Control Approaches for Quadrotor Unmanned Aerial Vehicle written by Moussa Labbadi and published by Springer Nature. This book was released on 2021-09-14 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies selected advanced flight control schemes for an uncertain quadrotor unmanned aerial vehicle (UAV) systems in the presence of constant external disturbances, parametric uncertainties, measurement noise, time-varying external disturbances, and random external disturbances. Furthermore, in all the control techniques proposed in this book, it includes the simulation results with comparison to other nonlinear control schemes recently developed for the tracking control of a quadrotor UAV. The main contributions of the present book for quadrotor UAV systems are as follows: (i) the proposed control methods are based on the high-order sliding mode controller (SMC) and hybrid control algorithm with an optimization method. (ii) the finite-time control schemes are developed by using fast terminal SMC (FTSMC), nonsingular FTSMC (NFTSMC), global time-varying SMC, and adaptive laws. (iii) the fractional-order flight control schemes are developed by using the fractional-order calculus theory, super twisting algorithm, NFTSMC, and the SMC. This book covers the research history and importance of quadrotor system subject to system uncertainties, external wind disturbances, and noise measurements, as well as the research status of advanced flight control methods, adaptive flight control methods, and flight control based on fractional-order theory. The book would be interesting to most academic undergraduate, postgraduates, researchers on flight control for drones and applications of advanced controllers in engineering field. This book presents a must-survey for advanced finite-time control for quadrotor system. Some parts of this book have the potential of becoming the courses for the modelling and control of autonomous flying machines. Readers (academic researcher, undergraduate student, postgraduate student, MBA/executive, and education practitioner) interested in nonlinear control methods find this book an investigation. This book can be used as a good reference for the academic research on the control theory, drones, terminal sliding mode control, and related to this or used in Ph.D. study of control theory and their application in field engineering.
Download or read book Proceedings of 2021 International Conference on Autonomous Unmanned Systems ICAUS 2021 written by Meiping Wu and published by Springer Nature. This book was released on 2022-03-18 with total page 3575 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the ICAUS 2021, which offers a unique and interesting platform for scientists, engineers and practitioners throughout the world to present and share their most recent research and innovative ideas. The aim of the ICAUS 2021 is to stimulate researchers active in the areas pertinent to intelligent unmanned systems. The topics covered include but are not limited to Unmanned Aerial/Ground/Surface/Underwater Systems, Robotic, Autonomous Control/Navigation and Positioning/ Architecture, Energy and Task Planning and Effectiveness Evaluation Technologies, Artificial Intelligence Algorithm/Bionic Technology and Its Application in Unmanned Systems. The papers showcased here share the latest findings on Unmanned Systems, Robotics, Automation, Intelligent Systems, Control Systems, Integrated Networks, Modeling and Simulation. It makes the book a valuable asset for researchers, engineers, and university students alike.
