Download or read book Integration of AC DC Microgrids into Power Grids written by Fazel Mohammadi and published by MDPI. This book was released on 2020-12-02 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: AC/DC Microgrids are a small part of low voltage distribution networks that are located far from power substations, and are interconnected through the point of common coupling to power grids. These systems are important keys for the flexible, techno-economic, and environmental-friendly generation of units for the reliable operation and cost-effective planning of smart electricity grids. Although AC/DC microgrids, with the integration of renewable energy resources and other energy systems, such as power-to-gas, combined heat and power, combined cooling heat and power, power-to-heat, power-to-vehicle, pump and compressed air storage, have several advantages, there are some technical aspects that must be addressed. This Special Issue aims to study the configuration, impacts, and prospects of AC/DC microgrids that enable enhanced solutions for intelligent and optimized electricity systems, energy storage systems, and demand-side management in power grids with an increasing share of distributed energy resources. It includes AC/DC microgrid modeling, simulation, control, operation, protection, dynamics, planning, reliability and security, as well as considering power quality improvement, load forecasting, market operations, energy conversion, cyber/physical security, supervisory and monitoring, diagnostics and prognostics systems.

Download or read book Connected and Autonomous Vehicles in Smart Cities written by Hussein T. Mouftah and published by CRC Press. This book was released on 2020-12-17 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive coverage of the five fundamental yet intertwined pillars paving the road towards the future of connected autonomous electric vehicles and smart cities. The connectivity pillar covers all the latest advancements and various technologies on vehicle-to-everything (V2X) communications/networking and vehicular cloud computing, with special emphasis on their role towards vehicle autonomy and smart cities applications. On the other hand, the autonomy track focuses on the different efforts to improve vehicle spatiotemporal perception of its surroundings using multiple sensors and different perception technologies. Since most of CAVs are expected to run on electric power, studies on their electrification technologies, satisfaction of their charging demands, interactions with the grid, and the reliance of these components on their connectivity and autonomy, is the third pillar that this book covers. On the smart services side, the book highlights the game-changing roles CAV will play in future mobility services and intelligent transportation systems. The book also details the ground-breaking directions exploiting CAVs in broad spectrum of smart cities applications. Example of such revolutionary applications are autonomous mobility on-demand services with integration to public transit, smart homes, and buildings. The fifth and final pillar involves the illustration of security mechanisms, innovative business models, market opportunities, and societal/economic impacts resulting from the soon-to-be-deployed CAVs. This book contains an archival collection of top quality, cutting-edge and multidisciplinary research on connected autonomous electric vehicles and smart cities. The book is an authoritative reference for smart city decision makers, automotive manufacturers, utility operators, smart-mobility service providers, telecom operators, communications engineers, power engineers, vehicle charging providers, university professors, researchers, and students who would like to learn more about the advances in CAEVs connectivity, autonomy, electrification, security, and integration into smart cities and intelligent transportation systems.

Download or read book Deregulated Electricity Structures and Smart Grids written by Baseem Khan and published by CRC Press. This book was released on 2022-04-14 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of restructuring of the power sector are competition and operating efficiency in the power industry that result in reliable, economical, and quality power supply to consumers. This comprehensive reference text provides an in-depth insight into these topics. Deregulated Electricity Structures and Smart Grids discusses issues including renewable energy integration, reliability assessment, stability analysis, reactive power compensation in smart grids, and harmonic mitigation, in the context of the deregulated smart electricity market. It covers important concepts including AC and DC grid modelling, harmonics mitigation and reactive power compensation in the deregulated smart grid, and extraction of energy from renewable energy sources under the deregulated electricity market with the smart grid. The text will be useful for graduate students and professionals in the fields of electrical engineering, electronics and communication engineering, renewable energy, and clean technologies.

Download or read book Hosting Capacity for Smart Power Grids written by Ahmed F. Zobaa and published by Springer Nature. This book was released on 2020-04-22 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together several aspects of hosting capacity (HC) assessment and enhancement of modern electrical power systems, HC is a key enabler for affordable, reliable and renewable energy sources, that will aid in transitioning away from traditional high-carbon energy sources. The chapters provide insight into the state of the art on current hosting capacity concepts, restrictive performance limits, distribution network operators and network planners’ viewpoints, and the cutting-edge technologies deployed worldwide for hosting capacity enhancement. Written by leading experts in power, control, and renewable energy resources. This book is beneficial to distribution system operators, network planners, distribution generation investors, and researchers in this field. Due to its broad scope, it is an ideal resource for students in advanced graduate-level courses and special topics in the field of hosting capacity assessment and enhancement in modern electrical power systems.

Download or read book Optimal Operation of Integrated Energy Systems Under Uncertainties written by Bo Yang and published by Elsevier. This book was released on 2023-09-06 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Operation of Integrated Energy Systems Under Uncertainties: Distributionally Robust and Stochastic Models discusses new solutions to the rapidly emerging concerns surrounding energy usage and environmental deterioration. Integrated energy systems (IESs) are acknowledged to be a promising approach to increasing the efficiency of energy utilization by exploiting complementary (alternative) energy sources and storages. IESs show favorable performance for improving the penetration of renewable energy sources (RESs) and accelerating low-carbon transition. However, as more renewables penetrate the energy system, their highly uncertain characteristics challenge the system, with significant impacts on safety and economic issues. To this end, this book provides systematic methods to address the aggravating uncertainties in IESs from two aspects: distributionally robust optimization and online operation. - Presents energy scheduling, considering power, gas, and carbon markets concurrently based on distributionally robust optimization methods - Helps readers design day-ahead scheduling schemes, considering both decision-dependent uncertainties and decision-independent uncertainties for IES - Covers online scheduling and energy auctions by stochastic optimization methods - Includes analytic results given to measure the performance gap between real performance and ideal performance

Download or read book Smart Grids and Big Data Analytics for Smart Cities written by Chun Sing Lai and published by Springer Nature. This book was released on 2020-10-31 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to different elements of smart city infrastructure - smart energy, smart water, smart health, and smart transportation - and how they work independently and together. Theoretical development and practical applications are presented, along with related standards, recommended practices, and professional guidelines. Throughout the book, diagrams and case studies are provided that demonstrate the systems presented, and extensive use of scenarios helps readers better grasp how smart grids, the Internet of Things, big data analytics, and trading models can improve road safety, healthcare, smart water management, and a low-carbon economy. A must-read for practicing engineers, consultants, regulators, utility operators, and environmentalists involved in smart city development, the book will also appeal to city planners and designers, as well as upper-level undergraduate and graduate students studying energy, environmental science, technology, economics, signal processing, information science, and power engineering.

Download or read book Microgrids written by Qobad Shafiee and published by John Wiley & Sons. This book was released on 2024-01-04 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microgrids Presents microgrid methodologies in modeling, stability, and control, supported by real-time simulations and experimental studies Microgrids: Dynamic Modeling, Stability and Control, provides comprehensive coverage of microgrid modeling, stability, and control, alongside new relevant perspectives and research outcomes, with vital information on several microgrid modeling methods, stability analysis methodologies and control synthesis approaches that are supported by real-time simulations and experimental studies for active learning in professionals and students alike. This book is divided into two parts: individual microgrids and interconnected microgrids. Both parts provide individual chapters on modeling, stability, and control, providing comprehensive information on the background, concepts, and architecture, supported by several examples and corresponding source codes/simulation files. Communication based control and cyber security of microgrids are addressed and new outcomes and advances in interconnected microgrids are discussed. Summarizing the outcome of more than 15 years of the authors’ teaching, research, and projects, Microgrids: Dynamic Modeling, Stability and Control covers specific sample topics such as: Microgrid dynamic modeling, covering microgrid components modeling, DC and AC microgrids modeling examples, reduced-order models, and model validation Microgrid stability analysis, covering stability analysis methods, islanded/grid connected/interconnected microgrid stability Microgrids control, covering hierarchical control structure, communication-based control, cyber-resilient control, advanced control theory applications, virtual inertia control and data-driven control Modeling, analysis of stability challenges, and emergency control of large-scale interconnected microgrids Synchronization stability of interconnected microgrids, covering control requirements of synchronous microgrids and inrush power analysis With comprehensive, complete, and accessible coverage of the subject, Microgrids: Dynamic Modeling, Stability and Control is the ideal reference for professionals (engineers, developers) and students working with power/smart grids, renewable energy, and power systems, to enable a more effective use of their microgrids or interconnected microgrids.

Download or read book Big Data Application in Power Systems written by Reza Arghandeh and published by Elsevier. This book was released on 2024-07-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Big Data Application in Power Systems, Second Edition presents a thorough update of the previous volume, providing readers with step-by-step guidance in big data analytics utilization for power system diagnostics, operation, and control. Bringing back a team of global experts and drawing on fresh, emerging perspectives, this book provides cutting-edge advice for meeting today's challenges in this rapidly accelerating area of power engineering. Divided into three parts, this book begins by breaking down the big picture for electric utilities, before zooming in to examine theoretical problems and solutions in detail. Finally, the third section provides case studies and applications, demonstrating solution troubleshooting and design from a variety of perspectives and for a range of technologies. Readers will develop new strategies and techniques for leveraging data towards real-world outcomes. Including five brand new chapters on emerging technological solutions, Big Data Application in Power Systems, Second Edition remains an essential resource for the reader aiming to utilize the potential of big data in the power systems of the future. - Provides a total refresh to include the most up-to-date research, developments, and challenges - Focuses on practical techniques, including rapidly modernizing monitoring systems, measurement data availability, big data handling and machine learning approaches for processing high dimensional, heterogeneous, and spatiotemporal data - Engages with cross-disciplinary lessons, drawing on the impact of intersectional technology including statistics, computer science, and bioinformatics - Includes five brand new chapters on hot topics, ranging from uncertainty decision-making to features, selection methods, and the opportunities provided by social network data

Download or read book New Technologies for Power System Operation and Analysis written by Huaiguang Jiang and published by Academic Press. This book was released on 2020-10-29 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Technologies for Power System Operation and Analysis considers the very latest developments in renewable energy integration and system operation, including electricity markets and wide-area monitoring systems and forecasting. Helping readers quickly grasp the essential information needed to address renewable energy integration challenges, this new book looks at basic power system mathematical models, advanced renewable integration and system optimizations from transmission and distribution system sides. Sections cover wind, solar, gas and petroleum, making this a useful reference for all engineers interested in power system operation. - Includes codes in MATLAB® and Python - Provides a complete analysis of all new and relevant power system technologies - Covers the impact on existing power system operations at the advanced level, with detailed technical insights

Download or read book Blockchain Based Smart Grids written by Miadreza Shafie-khah and published by Academic Press. This book was released on 2020-04-30 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blockchain-Based Smart Grids presents emerging applications of blockchain in electrical system and looks to future developments in the use of blockchain technology in the energy market. Rapid growth of renewable energy resources in power systems and significant developments in the telecommunication systems has resulted in new market designs being employed to cover unpredictable and distributed generation of electricity. This book considers the marriage of blockchain and grid modernization, and discusses the transaction shifts in smart grids, from centralized to peer-to-peer structures. In addition, it addresses the effective application of these structures to speed up processes, resulting in more flexible electricity systems. Aimed at moving towards blockchain-based smart grids with renewable applications, this book is useful to researchers and practitioners in all sectors of smart grids, including renewable energy providers, manufacturers and professionals involved in electricity generation from renewable sources, grid modernization and smart grid applications.

Download or read book Machine Learning for Energy Systems written by Denis Sidorov and published by MDPI. This book was released on 2020-12-08 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with recent advances in and applications of computational intelligence and advanced machine learning methods in power systems, heating and cooling systems, and gas transportation systems. The optimal coordinated dispatch of the multi-energy microgrids with renewable generation and storage control using advanced numerical methods is discussed. Forecasting models are designed for electrical insulator faults, the health of the battery, electrical insulator faults, wind speed and power, PV output power and transformer oil test parameters. The loads balance algorithm for an offshore wind farm is proposed. The information security problems in the energy internet are analyzed and attacked using information transmission contemporary models, based on blockchain technology. This book will be of interest, not only to electrical engineers, but also to applied mathematicians who are looking for novel challenging problems to focus on.

Download or read book Handbook of Research of Internet of Things and Cyber Physical Systems written by Amit Kumar Tyagi and published by CRC Press. This book was released on 2022-06-09 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume discusses how integrating IoT devices and cyber-physical systems can help society by providing multiple efficient and affordable services to users. It covers the various applications of IoT-based cyber-physical systems, such as satellite imaging in relation to climate change, industrial control systems, e-healthcare applications, security uses, automotive and traffic monitoring and control, urban smart city planning, and more. The authors also outline the methods, tools, and algorithms for IoT-based cyber-physical systems and explore the integration of machine learning, blockchain, and Internet of Things-based cloud applications. With the continuous emerging new technologies and trends in IoT technology and CPS, this volume will be a helpful resource for scientists, researchers, industry professionals, faculty and students, and others who wish to keep abreast of new developments and new challenges for sustainable development in Industry 4.0.

Download or read book Artificial Intelligence for Renewable Energy and Climate Change written by Pandian Vasant and published by John Wiley & Sons. This book was released on 2022-07-21 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: ARTIFICIAL INTELLIGENCE FOR RENEWABLE ENERGY AND CLIMATE CHANGE Written and edited by a global team of experts in the field, this groundbreaking new volume presents the concepts and fundamentals of using artificial intelligence in renewable energy and climate change, while also covering the practical applications that can be utilized across multiple disciplines and industries, for the engineer, the student, and other professionals and scientists. Renewable energy and climate change are two of the most important and difficult issues facing the world today. The state of the art in these areas is changing rapidly, with new techniques and theories coming online seemingly every day. It is important for scientists, engineers, and other professionals working in these areas to stay abreast of developments, advances, and practical applications, and this volume is an outstanding reference and tool for this purpose. The paradigm in renewable energy and climate change shifts constantly. In today’s international and competitive environment, lean and green practices are important determinants to increase performance. Corresponding production philosophies and techniques help companies diminish lead times and costs of manufacturing, improve delivery on time and quality, and at the same time become more ecological by reducing material use and waste, and by recycling and reusing. Those lean and green activities enhance productivity, lower carbon footprint and improve consumer satisfaction, which in reverse makes firms competitive and sustainable. This practical, new groundbreaking volume: Features coverage on a wide range of topics such as classical and nature-inspired optimization and optimal control, hybrid and stochastic systems Is ideally designed for engineers, scientists, industrialist, academicians, researchers, computer and information technologists, sustainable developers, managers, environmentalists, government leaders, research officers, policy makers, business leaders and students Is useful as a practical tool for practitioners in the fields of sustainable and renewable energy sustainability Includes wide coverage of how artificial intelligence can be used to impact the struggle against global warming and climate change

Download or read book Wireless Automation as an Enabler for the Next Industrial Revolution written by Muhammad Ali Imran and published by John Wiley & Sons. This book was released on 2020-02-25 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the components, challenges, and solutions of wireless automation as enablers for industry 4.0 This timely book introduces the state of the art in industrial automation techniques, concentrating on wireless methods for a variety of applications, ranging from simple smart homes to heavy-duty complex industrial setting with robotics accessibility. It covers a wide range of topics including the industrial revolution enablers, applications, challenges, their possible solutions, and future directions. Wireless Automation as an Enabler for the Next Industrial Revolution opens with an introduction to wireless sensor networks and their applications in various domains, emphasizing industrial wireless networks and their future uses. It then takes a look at life-span extension for sensor networks in the industry, followed by a chapter on multiple access and resource sharing for low latency critical industrial networks. Industrial automation is covered next, as is the subject of ultra reliable low latency communications. Other topics include: self healing in wireless networks; cost efficiency optimization for industrial automation; a non event-based approach for non-intrusive load monitoring; wireless networked control; and caching at the edge in low latency wireless networks. The book finishes with a chapter on the application of terahertz sensing at nano-scale for precision agriculture. Introduces the future evolving dimension in industrial automation and discusses the enablers of the industrial revolution Places particular emphasis on wireless communication techniques which make industrial automation reliable, efficient, and cost-effective Covers many of the associated topics and concepts like robotics, AI, internet-of-things, telesurgery, and remote manufacturing Of great interest to researchers from academia and industry who are looking at the industrial development from various perspectives Wireless Automation as an Enabler for the Next Industrial Revolution is an excellent book for telecom engineers, IoT experts, and industry professionals. It would also greatly benefit researchers, professors, and doctorate and postgraduate students involved in automation and industry 4.0.

Download or read book Advances in Intelligent Computing and Communication written by Swagatam Das and published by Springer Nature. This book was released on 2021-05-22 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality research papers presented at the 3rd International Conference on Intelligent Computing and Advances in Communication (ICAC 2020) organized by Siksha ‘O’ Anusandhan Deemed to be University, Bhubaneswar, Odisha, India, in November 2020. This book brings out the new advances and research results in the fields of theoretical, experimental, and applied signal and image processing, soft computing, networking, and antenna research. Moreover, it provides a comprehensive and systematic reference on the range of alternative conversion processes and technologies.

Download or read book Sustainable Interdependent Networks II written by M. Hadi Amini and published by Springer. This book was released on 2018-12-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book paves the way for researchers working on the sustainable interdependent networks spread over the fields of computer science, electrical engineering, and smart infrastructures. It provides the readers with a comprehensive insight to understand an in-depth big picture of smart cities as a thorough example of interdependent large-scale networks in both theory and application aspects. The contributors specify the importance and position of the interdependent networks in the context of developing the sustainable smart cities and provide a comprehensive investigation of recently developed optimization methods for large-scale networks. There has been an emerging concern regarding the optimal operation of power and transportation networks. In the second volume of Sustainable Interdependent Networks book, we focus on the interdependencies of these two networks, optimization methods to deal with the computational complexity of them, and their role in future smart cities. We further investigate other networks, such as communication networks, that indirectly affect the operation of power and transportation networks. Our reliance on these networks as global platforms for sustainable development has led to the need for developing novel means to deal with arising issues. The considerable scale of such networks, due to the large number of buses in smart power grids and the increasing number of electric vehicles in transportation networks, brings a large variety of computational complexity and optimization challenges. Although the independent optimization of these networks lead to locally optimum operation points, there is an exigent need to move towards obtaining the globally-optimum operation point of such networks while satisfying the constraints of each network properly. The book is suitable for senior undergraduate students, graduate students interested in research in multidisciplinary areas related to future sustainable networks, and the researchers working in the related areas. It also covers the application of interdependent networks which makes it a perfect source of study for audience out of academia to obtain a general insight of interdependent networks.

Download or read book Data Science From Research to Application written by Mahdi Bohlouli and published by Springer Nature. This book was released on 2020-01-28 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents outstanding theoretical and practical findings in data science and associated interdisciplinary areas. Its main goal is to explore how data science research can revolutionize society and industries in a positive way, drawing on pure research to do so. The topics covered range from pure data science to fake news detection, as well as Internet of Things in the context of Industry 4.0. Data science is a rapidly growing field and, as a profession, incorporates a wide variety of areas, from statistics, mathematics and machine learning, to applied big data analytics. According to Forbes magazine, “Data Science” was listed as LinkedIn’s fastest-growing job in 2017. This book presents selected papers from the International Conference on Contemporary Issues in Data Science (CiDaS 2019), a professional data science event that provided a real workshop (not “listen-shop”) where scientists and scholars had the chance to share ideas, form new collaborations, and brainstorm on major challenges; and where industry experts could catch up on emerging solutions to help solve their concrete data science problems. Given its scope, the book will benefit not only data scientists and scientists from other domains, but also industry experts, policymakers and politicians.