Download or read book Automotive Software Engineering written by Thomas Zurawka and published by SAE International. This book was released on 2016-09-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early seventies, the development of the automobile has been characterized by a steady increase in the deploymnet of onboard electronics systems and software. This trend continues unabated and is driven by rising end-user demands and increasingly stringent environmental requirements. Today, almost every function onboard the modern vehicle is electronically controlled or monitored. The software-based implementation of vehicle functions provides for unparalleled freedoms of concept and design. However, automobile development calls for the accommodation of contrasting prerequisites – such as higher demands on safety and reliability vs. lower cost ceilings, longer product life cycles vs. shorter development times – along with growing proliferation of model variants. Automotive Software Engineering has established its position at the center of these seemingly conflicting opposites. This book provides background basics as well as numerous suggestions, rare insights, and cases in point concerning those processes, methods, and tools that contribute to the surefooted mastery of the use of electronic systems and software in the contemporary automobile.

Download or read book Principles of Vibration Analysis written by C. Q. Liu and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shared Mobility and Automated Vehicles written by Ata M. Khan and published by IET. This book was released on 2021-12-21 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shared mobility is gaining increasing attention in private and public sectors. Serving as a source of information on how best to shape shared vehicle systems of the future, this book contributes knowledge on key facets of shared mobility. It includes shared vehicle systems as well as shared automated vehicle systems.

Download or read book Automotive Engineering and Mobility Research written by Rozli Zulkifli and published by Trans Tech Publications Ltd. This book was released on 2014-10-08 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2nd International Conference on Recent Advances in Automotive Engineering and Mobility Research (ReCAR 2013), December 16-18, 2013, Kuala Lumpur, Malaysia

Download or read book Automotive Engineering Fundamentals written by Richard Stone and published by SAE International. This book was released on 2004-04-30 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the introduction of Automotive Engineering Fundamentals, Richard Stone and Jeffrey K. Ball provide a fascinating and often amusing history of the passenger vehicle, showcasing the various highs and lows of this now-indispensable component of civilized societies. The authors then provide an overview of the publication, which is designed to give the student of automotive engineering a basic understanding of the principles involved with designing a vehicle. From engines and transmissions to vehicle aerodynamics and computer modeling, the intelligent, interesting presentation of core concepts in Automotive Engineering Fundamentals is sure to make this an indispensable resource for engineering students and professionals alike.

Download or read book Handbook of Automotive Engineering written by H.-H. Braess (ed) and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This latest edition and successor to the well-known German language handbook last published by Professors Heinrich Buschmann and Paul Koessler is widely considered to be one of the most comprehensive encyclopedias of vehicle systems and design. Featuring more extensive coverage than other comparable publications, it contains: information on automotive design and applications, Over 40 subject matter experts focusing on specific automotive topics , Information on powertrains, electronics, vehicle safety and future materials, Extensive figures, drawings, illustrations and formulas.

Download or read book The evolution of automotive technology written by Gijs Mom and published by SAE International. This book was released on 2023-05-17 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of "understanding the present through its history" is based on two insights. First, it helps to know where a technology comes from: what were its predecessors, how did they evolve as a result of the continuous efforts to solve theoretical and practical problems, who were crucial in their emergence, and which cultural differences made them develop into divergent families of artifacts? Second, and closely related to the first insight, how does a certain technology or system fit into its societal context, its culture of mobility, its engineering culture, its culture of car driving, its alternatives, its opponents? Only thus, by studying its prehistory and its socio-cultural context, can we acquire a true 'grasp' of a technology. The Evolution of Automotive Technology: A Handbook, Second Edition covers one and a quarter century of the automobile, conceived as a cultural history of its technology, aimed at engineering students and all those who wish to have a concise introduction into the basics of automotive technology and its long-term development. (ISBN:9781468605976 ISBN:9781468605969 ISBN:9781468605983 DOI:10.4271/9781468605976) 2nd Edition.

Download or read book Automotive Systems Engineering written by Markus Maurer and published by Springer Science & Business Media. This book was released on 2013-05-22 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the shift in design paradigm in automobile industry. It presents future innovations, often referred as “automotive systems engineering”. These cause fundamental innovations in the field of driver assistance systems and electro-mobility as well as fundamental changes in the architecture of the vehicles. New driving functionalities can only be realized if the software programs of multiple electronic control units work together correctly. This volume presents the new and innovative methods which are mandatory to master the complexity of the vehicle of the future.

Download or read book Atlantic Automobilism written by Gijs Mom and published by Berghahn Books. This book was released on 2014-12-01 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our continued use of the combustion engine car in the 21st century, despite many rational arguments against it, makes it more and more difficult to imagine that transport has a sustainable future. Offering a sweeping transatlantic perspective, this book explains the current obsession with automobiles by delving deep into the motives of early car users. It provides a synthesis of our knowledge about the emergence and persistence of the car, using a broad range of material including novels, poems, films, and songs to unearth the desires that shaped our present “car society.” Combining social, psychological, and structural explanations, the author concludes that the ability of cars to convey transcendental experience, especially for men, explains our attachment to the vehicle.

Download or read book Automotive Engineering and Mobility Research written by and published by . This book was released on 2014 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Collection of Selected, Peer Reviewed Papers from the 2nd International Conference Onrecent Advances in Automotive Engineering and Mobility Research (ReCAR 2013), December 16-18, 2013, Kuala Lumpur, Malaysia. The 120 papers are grouped as follows: Chapter 1: Biodiesel, Diesel and Gases Fuel, Chapter 2: Computational & Experimental Mechanics, Chapter 3: Dynamics, Control and Mechatronics, Chapter 4: Materials and Processing Technologies, Chapter 5: Engine Lubrication and Thermoengineering, Chapter 6: Internal Combustion Engine and Computational Fluid Mechanics, Chapter 7: Noise, Monitoring, Vibration and Harshness, Chapter 8: Design, Hybrid and Electric Vehicles, Chapter 9: Crash and Safety, Transportation and Ergonomics, Chapter 10: Manufacturing, Chapter 11: Magnetorheological Applications.

Download or read book Systems Engineering for Automotive Powertrain Development written by Hannes Hick and published by Springer. This book was released on 2021-02-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last century, the automotive industry has been dominated by internal combustion engines. Their flexibility of application, driving range, performance and sporty characteristics has resulted in several generations of this technology and has formed generations of engineers. But that is not the end of the story. Stricter legislation and increased environmental awareness have resulted in the development of new powertrain technologies in addition and parallel to the highly optimized internal combustion engine. Hybrid powertrains systems, pure battery electric systems and fuel cell systems, in conjunction with a diverse range of applications, have increased the spectrum of powertrain technologies. Furthermore, automated driving together with intelligent and highly connected systems are changing the way to get from A to B. Not only is the interaction of all these new technologies challenging, but also several different disciplines have to collaborate intensively in order for new powertrain systems to be successfully developed. These new technologies and the resulting challenges lead to an increase in system complexity. Approaches such as systems engineering are necessary to manage this complexity. To show how systems engineering manages the increasing complexity of modern powertrain systems, by providing processes, methods, organizational aspects and tools, this book has been structured into five parts. Starting with Challenges for Powertrain Development, which describes automotive-related challenges at different levels of the system hierarchy and from different point of views. The book then continues with the core part, Systems Engineering, in which all the basics of systems engineering, model-based systems engineering, and their related processes, methods, tools, and organizational matters are described. A special focus is placed on important standards and the human factor. The third part, Automotive Powertrain Systems Engineering Approach, puts the fundamentals of systems engineering into practice by adding the automotive context. This part focuses on system development and also considers the interactions to hardware and software development. Several approaches and methods are presented based on systems engineering philosophy. Part four, Powertrain Development Case Studies, adds the practical point of view by providing a range of case studies on powertrain system level and on powertrain element level and discusses the development of hybrid powertrain, internal combustion engines, e-drives, transmissions, batteries and fuel cell systems. Two case studies on a vehicle level are also presented. The final part, Outlook, considers the development of systems engineering itself with particular focus on information communication technologies. Even though this book covers systems engineering from an automotive perspective, many of the challenges, fundamental principles, conclusions and outlooks can be applied to other domains too. Therefore, this book is not only relevant for automotive engineers and students, but also for specialists in scientific and industrial positions in other domains and anyone who has to cope with the challenge of successfully developing complex systems with a large number of collaborating disciplines.

Download or read book Introduction to Automotive Engineering written by R. Sakthivel and published by John Wiley & Sons. This book was released on 2019-04-09 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is one of the largest and most important industries in the world. Cars, buses, and other engine-based vehicles abound in every country on the planet, and it is continually evolving, with electric cars, hybrids, self-driving vehicles, and so on. Technologies that were once thought to be decades away are now on our roads right now. Engineers, technicians, and managers are constantly needed in the industry, and, often, they come from other areas of engineering, such as electrical engineering, process engineering, or chemical engineering. Introductory books like this one are very useful for engineers who are new to the industry and need a tutorial. Also valuable as a textbook for students, this introductory volume not only covers the basics of automotive engineering, but also the latest trends, such as self-driving vehicles, hybrids, and electric cars. Not only useful as an introduction to the science or a textbook, it can also serve as a valuable reference for technicians and engineers alike. The volume also goes into other subjects, such as maintenance and performance. Data has always been used in every company irrespective of its domain to improve the operational efficiency and performance of engines. This work deals with details of various automotive systems with focus on designing various components of these system to suit the working conditions on roads. Whether a textbook for the student, an introduction to the industry for the newly hired engineer, or a reference for the technician or veteran engineer, this volume is the perfect introduction to the science of automotive engineering.

Download or read book Automotive Systems and Software Engineering written by Yanja Dajsuren and published by Springer. This book was released on 2019-07-17 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art, challenges and future trends in automotive software engineering. The amount of automotive software has grown from just a few lines of code in the 1970s to millions of lines in today’s cars. And this trend seems destined to continue in the years to come, considering all the innovations in electric/hybrid, autonomous, and connected cars. Yet there are also concerns related to onboard software, such as security, robustness, and trust. This book covers all essential aspects of the field. After a general introduction to the topic, it addresses automotive software development, automotive software reuse, E/E architectures and safety, C-ITS and security, and future trends. The specific topics discussed include requirements engineering for embedded software systems, tools and methods used in the automotive industry, software product lines, architectural frameworks, various related ISO standards, functional safety and safety cases, cooperative intelligent transportation systems, autonomous vehicles, and security and privacy issues. The intended audience includes researchers from academia who want to learn what the fundamental challenges are and how they are being tackled in the industry, and practitioners looking for cutting-edge academic findings. Although the book is not written as lecture notes, it can also be used in advanced master’s-level courses on software and system engineering. The book also includes a number of case studies that can be used for student projects.

Download or read book Control Applications of Vehicle Dynamics written by Jingsheng Yu and published by CRC Press. This book was released on 2021-12-20 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential knowledge of car vehicle dynamics and control theory with NI LabVIEW software product application, resulting in a practical yet highly technical guide for designing advanced vehicle dynamics and vehicle system controllers. Presenting a clear overview of fundamental vehicle dynamics and vehicle system mathematical models, the book covers linear and non-linear design of model based controls such as wheel slip control, vehicle speed control, path following control, vehicle stability and rollover control, stabilization of vehicle-trailer system. Specific applications to autonomous vehicles are described among the methods. It details the practical applications of Kalman-Bucy filtering and the observer design for sensor signal estimation, alongside lateral vehicle dynamics and vehicle rollover dynamics. The book also discusses high level controllers, alongside a clear explanation of basic control principles for regenerative braking in both electric and hybrid vehicles, and wheel torque vectoring systems. Concrete LabVIEW simulation examples of how the models and controls are used in representative applications, along with software algorithms and LabVIEW block diagrams are illustrated. It will be of interest to engineering students, automotive engineering students and automotive engineers and researchers.

Download or read book E Mobility written by M. Kathiresh and published by Springer Nature. This book was released on 2021-12-01 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides easy interpretable explanations for the key technologies involved in Electric Vehicles and Hybrid Electric Vehicles. The authors discuss the various electrical machines, drives, and controls used in EV and HEV. The book provides a detailed coverage of Regenerative Braking Systems used in EV and HEV. The book also illustrates the battery technology and battery management systems in EV and HEV. This book is intended for academicians, researchers and industrialists. In addition, this book has the following features Discusses the various Economic and Environmental Impact of Electric and Hybrid Electric Vehicles Discusses the role of Artificial Intelligence in Electric / Hybrid Electric Vehicles Illustrates the concept of Vehicle to Grid Technology and the smart charging station infrastructure and issues involved in the same Elucidates the concept of Internet of Vehicles Presents the latest research and applications in alternate energy vehicles

Download or read book Globalizing Automobilism written by Gijs Mom and published by Berghahn Books. This book was released on 2020-08-07 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why has “car society” proven so durable, even in the face of mounting environmental and economic crises? In this follow-up to his magisterial Atlantic Automobilism, Gijs Mom traces the global spread of the automobile in the postwar era and investigates why adopting more sustainable forms of mobility has proven so difficult. Drawing on archival research as well as wide-ranging forays into popular culture, Mom reveals here the roots of the exuberance, excess, and danger that define modern automotive culture.

Download or read book Project Management for Automotive Engineers written by Jon Quigley and published by . This book was released on 2016 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project Management for Automotive Engineers: A Field Guide was developed to help automotive engineers be better project managers as automotive projects involve suppliers dispersed across the globe, and can often span multiple years. Project scope change is common, and so too are the budget constraints and tight deadlines. This book is an excellent guide on how to manage continuous change. As project management in this particular industry is intrinsically linked to product development, the chapters focus on the project management aspects that are significant during the various stages of a produc.